Bridge and AP, using a 1200 series bridge.

Hi Folks,
I would like to bridge from an AP1131 to an AP1262 using the 5.8 ghz radios then allow access via the 2.4 ghz radio on the 1260. I will use a directional antenna for the 1260 bridge to optimize performance. The 5ghz radio will only be used for bridging. The ap 1131 is an AP right now but only offers access on 2.4 ghz. There are only a few clients.
The 1130 will be sitting in a window with the ant5160 outdoor mounted and pointed at it from ~200 feet away.
Does anyone see an issue? Maybe suggest a better parts list. I was originally thinking of using a 1310 as the bridge and a 1140 as the AP but that configuration is not as flexiable and the 1310 part is very old... I understand I will not get N throughput since the 1130 is not N capable, it is already installed. I need autonomous AP and can upgrade to 1140 in the future to improve performance.
I plan to upgrade to WCS next year, does it support this type of configuration? I am assuming that IOS does...
So here are the part numbers that I plan to use.
AIR-AP1262N-A-K9
AIR-AP1131AG-A-K9
Directional 5.8 ghz
AIR-ANT5160NP-R=
Omni 2.4 ghz
AIR-ANT2430V-R=
Thanks for any help,
Joe

Joe,
I am a little confused by your post but can offer some answers.
First of all I assume your intending to purt the external antennas on the 1262 not the 1130.
In terms of configuration you will need to configure 1 of the 802.11a radios in either the 1130 or the 1262 as a station role of root and the other in station role of non-root, that will enable them to connect to each other and bridge, then you can configure the 802.11b/g radios any way you choose and everythign should work as I think your intending,
over this distance you may get decent speeds. I'd be more inclined to use 1262's on each side with appropriate antennas; depending on what exactly your trying to accomplish on each side as far as coverage goes..
In terms of moving to WCS and lightweight mode it really doesn't support this configuration.
HTH

Similar Messages

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

CS6 Bridge and Yosemite.... Bridges Crashes

I updated to Yosemite last night and everything runs fine except CS6 Bridge. It crashes when a new folder is opened. When I open the hard drive where the image folder is Bridge does great loading that content. Then when I click on a new folder, it will start its process, 5 or 6 images in it crashes...
Any thoughts on how to fix this? Thank you in advance

Hi Pixelagogo,
I generally am using Bridge-CC so I quit that and tested my Bridge-CS6 and I had no issue.
Some things to try:
1) The cache may be corrupted. Once you open your folder go to Bridge Preferences -> Cache -> Purge Cache.
If that doesn't work than:
2) Delete your Prefs. Do do this, quit Bridge (if it's already running), and double-click on the Bridge application while holding the Shift-Option-Control keys. You should get a message asking if you want to delete your Prefs, click Yes.
If that doesn't solve the problem,
3) try deleting Bridge and reinstalling.
Good luck,
Gary

Updated Bridge and PS CC, added Output module - Bridge now slow

Trying to figure out why Bridge is lagging. Prior to the updates I ran a week ago, everything was fine. Now that I have 6.1.0.116 x64 - I click and wait. And wait some more. And wait and then finally, about 10-15 seconds later, Bridge comes back to life. I Googled it and found a discussion here about it, however, I followed the removing libraries chatter and no change.
Getting extremely frustrated as I count on Bridge for so much. Has anyone else experienced lag since they updated?
Running it on a brand new machine, Win 8.1, 16G RAM, Intel Core i7-4790, 1 TB hard drive.... No other changes were made to cause the lag in Bridge.
Any ideas would be well appreciated.
Thanks.

Any ideas?

How do I connect cc2014 to Bridge and not the former cc where bridge automatically takes me now.

I called for help to make a selection of an image on the desk top to go in to Bridge with my newly installed 2014 CC for a Mac. The person was not able to help me but told me to call an advanced agent. They had me go to Bridge's file and then 'open in'. This worked for a short time but today it refered back to my original cc. In the scroll down the cc is the default and I did not see away to tern that off. Can someone help me?

Just read this on another thread
"That's the answer then. The fact that the Powerline network is an extension of the same network, same house, etc., it's a different network, hence Home Sharing won't work."
Is this true? If so, does anyone want to buy an airport express...?

Cisco 1200 as bridge

Hi everyone
I am about to use Cisco 1200 series AP as bridge , but I have seen and I have compared it with Cisco 1300 and 1400 outdoor models , and I saw that 1200 is mainly for indoor (LW).
Now the question is :
1. Can I use it as outdoor bridge for Point to Point linking ?
2. What will be maximum distance with reflector grid antennas (and patch antennas)?
3. If in practice , is it stabile ?
Thank you

Again I stress I can only go by what I'd install in the UK so it may not be applicable wherever you are! Also, I always try and avoid mixing vendors equipment if at all possible so I would use either one of two Cisco antenna, I've also listed antenna cables, use the shortest you can:
AIR-ANT1949 Yagi mast mount 2MB at 29.49 km.
AIR-ANT3338 Solid Dish 2MB at 42.62 km.
AIR-CAB020LL-R 6m antenna cable 1.3db loss
AIR-CAB050LL-R 15m antenna cable 3.4db loss
AIR-CAB100ULL-R 30m antenna cable 4.4db loss
Ranges and throughputs are Cisco's, you may find the biggest problem is clear line of sight over that sort of distance.
For more information check the antenna guide here:
http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008022b11b.html
You can have this one free of charge : ) just don't forget to award points if it's of use : )

I can't get my HP psc 1200 series to scan with my Mac

I've installed, uninstalled, and installed HP psc 1200 series software but I cannot use any of the scan features of the printer. I have been to HP and downloaded drivers and still no luck. Any suggestions?

maybe this link will help http://www.makeuseof.com/answers/play-media-files-mac-formatted-external-hard-dr ive-hdtv/ unfortunately its for file up to 4 GB size, otherwise try to connect your mac directly to your Tv or I suggest contacting SAMSUNG about this issue, maybe the have assigned softwares for this formatting issues like in western digital for example.

Using Adobe Bridge and iPhoto together

I use Adobe Bridge (and Photoshop) to work on my photos. iPhoto is not an option since I shoot in Camera RAW. I also own an Apple TV and want to store all of my photos in iPhoto so they are available to the rest of my family via Apple TV. Has anyone figured out a way to do image manipulation first in Bridge & Photoshop and then have them sent (or later updated) in iPhoto in an automated fashion?
Conceptually, every time I add or change a photo in Bridge or Photoshop, I'd like to convert it to JPG, and add or modify the image in iPhoto.

Also make sure PS's File handing preferences "Macimize PSD and PSB File Compatibility" is set to Always and that there are no alpha channels in the file. An alpha channel will cause the black image that you're referring to.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Problem closing an ActiveX created with the bridge and used in a scada.

Hi all,
I cretaed an ActiveX (using the bridge) to be used in a scada software. I inserted the activex in a panel and it opens and work properly when the panel is open. The problem is that when I close the panel, the scada doesnt free the memory. Is it supposed to do free it or is it my bussines? Should or can I do it by calling any method, function? Any suggestion?
Thanks!
Bobby

I guess that on exit scada does not release resources. Try the tool at
http://www.simtel.net/product.php[id]60701[sekid]0[SiteID]simtel.net

Can I use the unit as a bridge and as an iTunes server simultaneously?

I need to know if I can use this as a bridge sometimes and as an iTunes server other times. I will never need to do both at the same time, however I will have all the cables physically hooked up at all times for both configurations. So basically it will be acting as a full time bridge but occasionally I want to use it as an iTunes server. So there will always be an Ethernet cable coming out of it plugged into a computer but there will also be an audio cable coming out of it connected to a stereo for periodic iTunes streaming. Is this feasible? Also please tell me if this is feasible on the first generation 802.11g model since I plan on using that model and not the newer 802.11n model. Thanks so much!!!

Yes that is possible. The music streaming feature of the AirPort Express (AX) is always available.

HT201269 My iphone contacts are not updating to Icloud, I can create a contact in Icloud and it will update to my phone but I cannot create a contact on my phone to have it update in the cloud, I am using Itunes as the bridge

My iphone contacts are not updating to Icloud or Outlook, I can create a contact in Icloud/Outlook and it will update to my Iphone but I cannot create a contact on my Iphone to have it update in the Cloud/Outlook, I am using Itunes as the bridge. I originally installed the Icloud manager to sync my contacts to Cloud/Outlook, but I did not like the functionality, when I uninstalled the Cloud manager and and installed Itunes I noticed that the none of my contacts in the phone updated to Outlook.
Thanks in advance.

Hi Cyclops12,
Welcome to the Support Communities!
The article below may be able to help you with this.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Cheers,
- Judy

I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop I get an enlarged version of the

I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop, I get on the lefthand side an enlarged version of the picture with red, yellow and green buttons on top. Any suggestions on what is wrong, or what can be corrected ?

And there is the problem. Your pictures are opening up in Mac's own Preview app.
Do you want all your jpegs to open in Photoshop, or only when you are in Bridge?
Selecting a program to open a certain file is called: File Type Association.
You can choose this at the MacOS level or the Bridge level.
Here's how to do both:
Either MacOS or Bridge has the wrong app associated with the jpeg. Let's start with MacOS
Close Bridge and Preview. Select one of your jpegs, and press Cmd i, That will bring up the file info window.
Go down to the "Open with" section of File Info.
Choose Photoshop CS4 and click on the Change All... button to apply this choice to every jpeg on your Mac.
Then open Bridge and see if double-clicking opens it in Photoshop.
Now that means all jpegs on your Mac will open in Photoshop. Maybe you don't want that.
You can set your jpegs to open in Preview when Bridge is closed.
When you open Bridge, there is Preferences > File Type Associations where you can direct Bridge to open the jpegs in Photoshop when you are viewing in Bridge.

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

The D610 needs ACR 8.3 so you are easily covered there. I am not entirely clear on the process you are using the bring the files onto your hard drive. The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK.

Bridge and AP, using a 1200 series bridge.

Similar Messages

Maybe you are looking for