Bridge and Camera Data (EXIF)

I need to know how, using Bridge and its metadata routines, to include EXIF data into a record set.
I am a digital archivist of old, long out of copyright books, manuscripts and other ephemera.  When scanning an old book I scan them as signatures.  Each scan will have two pages which are split, i.e. page 1 and page 4.
Page 1 (the original scan) contains the camera data.  The page four image, copied out of page 1, does not contain any camera data when saved.  After processing page 1 I add to it the applicable metadata for the volume and export it as a template, applying that template to the record set.
However, the Camera Data (EXIF) does not get applied to all the pages in the record set.  Is there any way around this?
Cordially,
A. Wayne Webb

fixed it with this work around
Camera Raw 8.4 | No metadata or Camera Raw edit

Similar Messages

  • Bridge - Exposure Camera Data (Exif) metadata display problem

    I'm working with raw files with thumbnails displayed in Bridge Content.  In Bridge preferences > Metadata I have Exposure and Exposure Bias Value checked on. (These are the first two lines in the metadata panel.)  When I select a raw file in Bridge the Exposure and Exposure Bias Value metadata are displayed in Bridge Metadata panel as expected.  When I open the raw file in acr 7 and make some edits, click Done in acr and return focus to Bridge, the Bridge thumbnail is updated  but the Exposure line in Bridge metadata panel disappears -- the Exposure Bias Value is the first line of the metadata panel.  If I clear the settings, the Exposure line and data return to the metadata panel.  I also have 'Exposure' selected for one of the additional lines in thumbnail metadata, where the exposure data is correctly displayed even when the exposure metadata line is not shown in the metadata panel. 
    I do not see this problem in pscs5 with acr 6.7 beta.  Is there some setting I need to check or is this a bug?

    For anyone who may find this post wondering why they can't see the specific EXIF data for each photo... "Show Metadata Placard" may be what you're looking for. Click the drop down at the top right of your Metadata panel and tick "Show Metadata Placard."  This will display a panel that looks like the info. panel on your camera (shutter speed, f-stop, iso, white balance, etc.).
    I had to figure this out after getting frustrated by the fact that Camera Data (Exif) in the Metadata panel only shows the "Max Aperture Value" of the lens instead of the aperture value that you actually shot.

  • Bridge and Camera RAW preferences not working

    I'm setting up a new Macbook Pro, late 2013 15", 10.9.2
    CS6 Production Premium, Also have Indesign CS6, LR5, Acrobat Pro 11. Camera RAW is version 8.4. Everything is up to date.
    Bridge and Camera RAW preferences are not working correctly. Bridge prefs related to Bridge display, e.g. color theme, text beneath thumbnails, favorite locations, etc.. all work fine. Bridge prefs open and close fine with no errors. "Double Click Edits Camera RAW Settings in Bridge" does not take. Photoshop launches to open Camera RAW regardless of whether this is checked or not. Camera RAW preferences will not open. Selecting "Camera RAW Preferences" from Bridge does nothing. Camera RAW seems to work fine hosted by Photoshop.
    I tried a new user with the same results.
    What's up with this? Anyone else seeing this? Solution?
    --David

    fixed it with this work around
    Camera Raw 8.4 | No metadata or Camera Raw edit

  • I can't open CS5 in windows 7 it tells me "Programm is locked or you are not legitimated". Bridge and Camera draw are working ok

    I can't open CS5 in Windows 7. It tells me "application is locked or you don't have legitimation". Bridge and Camera Raw are OK.

    Hi,
         thank you for your answer.
         The original Text photoshop showing me is the following:
         Konnte ein Arbeitsvolumen nicht öffnen, weil die Datei gesperrt ist
    oder Sie keine ausreichende Berechtigung haben. Heben Sie den Schutz
    der Datei mit Hilfe des Befehls 'Eigenschaften' im Windows Explorer
    auf.
         Sorry I can tell you this only in German. 
         After Installation the Version 64 Bit couldn't work because of this
    sentence (Windows 7 has 64 Bit Version). The 32 Bit Version worked
    without problems. The next day both versions didn't work because of
    this Informatiom. Bridge and Camera raw workinjg perfect but photoshop
    (CS 5) is blocked.

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • CS5 not responding after opening Bridge and Camera Raw

    I have been using bridge, camera raw and cs5 since it was released. I have not any problems until this morning. I am able to open Bridge and Camera Raw, but when trying to open PS CS5, it does not respond?
    Any suggestions?

    Try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • My Photoshop, Bridge, and Camera Raw in CS5 will not update. The update downloads and then says there was an error.

    I am not able to update any of my CS5 files. Especially, Photoshop, Bridge, and Camera Raw.

    Adobe - Photoshop : For Windows
    Adobe - Photoshop : For Macintosh
    Photoshop: Basic Troubleshooting steps to fix most issues
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

    With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

    Hi,
    Yes, both Camera Raw and Bridge are included. Bridge will need a separate installation, however.
    regards,
    steve

  • Are Bridge and Mini Bridge and Camera Raw part of PS?

    1.) Are Bridge and Mini Bridge and Camera Raw part of PS? OR do they also come with other programs in the Adobe software suite?
    2.) What is the difference between Bridge and Mini Bridge?
    Thanks.

    1.) The  Bridge application is included in the Photoshop installer, as well as  some other Adobe products.(more info:  http://www.adobe.com/products/creativesuite/bridge/?promoid=GWELP). The  Mini Bridge extension is only included in Photoshop CS5, and InDesign  CS5. The Photoshop Camera Raw plug-in is shared by Photoshop, and  Bridge (and is also found in Photoshop Elements).
    2.) Bridge is a separate application, whereas Mini Bridge is a panel  that's hosted by the Photoshop or InDesign application. Bridge has a fuller feature set than Mini Bridge and can be used by itself. Mini Bridge needs Bridge to create thumbnails, keep files  synchronized, and perform other  tasks, but operates in the context of the Ps or ID host application (ie. drag/drop multiple assets into working document w/o losing document view).
    Online version of Mini Bridge Help: http://help.adobe.com/en_US/creativesuite/cs/using/WS4bebcd66a74275c33c28e88f1235296fe93-8 000.html
    regards,
    steve

  • D/L the creative cloud upgrades fro LR 2015, PS cc and Bridge and came back a 1/2 hour later and CC indicated the d/l was complete.  When I click to start LR 2015 nothing happens.  I cannot get LR or PS started.  Previous versions start.

    D/L the creative cloud upgrades fro LR 2015, PS cc and Bridge and came back a 1/2 hour later and CC indicated the d/l was complete.  When I click to start LR 2015 nothing happens.  I cannot get LR or PS started.  Previous versions start.

    As stated in 1.:
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    Obviously, it will not harm your computer provided you follow the instructions. However, if you don't post your results in the thread where you were given those instructions, then the person helping you cannot help you further. As he asks at the end, "please post the test results on Pastebin, then post a link here to the page you created."

  • DNGs produced from Hasselblad .fff files display a different image in Bridge and Camera Raw

    Lately, not sure when this started exactly, Bridge CC (and Camera RAW 8.7) are displaying incorrect DNG images!  Instead of showing the image I expect to see, I'll see an old image from days ago.  This seems to carry on from Bridge through to Camera RAW.  But then if I continue on to Photoshop with the image, it'll finally show the correct image. 
    I'm assuming this has something to do with DNG, because if I load another raw file type (like .fff or .NEF), it seems ok.  Also it seems to be ok with DNGs produced from other cameras like Nikon D90.
    My set up:
    - Mac OS X 10.9.5 (Mavericks)
    - Bridge CC
    - Camera Raw 8.7
    - Photoshop CC 2014
    - Hasselblad H4D-50

    HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

  • Images won't open in PS from Bridge and Camera Raw.

    I am suddenly unable to open images in Photoshop CS5 from Bridge or Camera Raw - what have I done wrong - how can I rectify it.

    Mullit wrote:
    I am also have a lot of start up problems with the computer itself and have lost a lot of my desk top, my internet search engine and various other things. Luckily all my documents and pictures are still intact though.
    This sounds serious.  I would make sure you have a backup on a seperate hd or disk or you photos and other documents.  If the drive fails you may loose everything on the hard drive.
    Check your free space and fragmentation on hd.  You should have about 20% free space.  So if you have a 400 gig drive you should have 80 gig free.

  • Bridge and Camera Raw vs. Lightroom

    Is there anything that can be done in Bridge or Camera Raw (CS6) that can not be done in Lightroom4?

    This is an extremely broad question, you could probably make a list of three dozen items, and I'm not going to attempt to do so. I point out that there is probably a very long "opposite" list, i.e. things that you can do in Lightroom that you cannot do with Bridge/ACR.
    One of the biggest differences is that Bridge is a file browser, while Lightroom is not. Thus, if you point Bridge to a folder, and there are 15 photos there, then Bridge "knows" about all of them, and you can view all of them and work with all of them. If you have previously imported 5 of those files into Lightroom, but not the other 10, then when you point Lightroom to this folder, it only knows about the 5 that have been imported, and you cannot see or work with the other 10. A consequence of this is that if you move a photo in your operating system, Bridge has no issues, but the photo becomes disconnected in Lightroom and cannot be used until a reconnect happens. Naturally there are advantages and disadvantages to both ways of doing things.
    If you have specific question about doing something in Bridge vs Lightroom, we can discuss those.

  • IPhoto application and camera Date differ!

    Lately many photos I import from my digital camera come up wrong in the iPhoto application.
    My camera (Cannon PowerShot A590) shows the right date, but iPhoto sets the "roll" date as :
    14/1/ 2008 to 21/31/2008
    One of these photos date shows as 21/21/2008
    I didn't notice this until I imported a roll, and tried to change it in the information box for each photo, but the date I typed in didn't save and reverted to the 21/21/2008.
    I can not find any place in the iPhoto "help" to correct this date problem. I can not change the date when I am trying to import a roll.
    What gives, how did this happen, since there is NO month of 14 or 21 ???
    Please advise quickly, thanks.

    Daniel:
    If you want to correct the date in the file itself, thus allowing other applications to have and use the correct date, then you'll have to export those files to a folder on the desktop and batch change the EXIF date with PhotoInfo. You can then import them again into iPhoto and delete those with the incorrect date. This will not create a compressed file as all you're doing is copying the file to the desktop, editing the date field and then copying back to iPhoto.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

    Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
    One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
    I now am very confused, how will I open it? I do not have adobe bridge!  After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
    My question is, do you still need adobe bridge installed in order to use camera raw?
    If yes, how does it work? How am I suppose to open camera raw?
    If no, how am I going to open camera raw without bridge?
    And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
    I badly need help!

    WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
    The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
    WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
    Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
    With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
    If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

Maybe you are looking for