Bridge and extend with AX?

I have an implementation of an Extreme Basestation, some switches, and network drops scrattered throughout a home. In some portions of the home, the wireless signal from the AEBS flat out won't reach but there are network drops in these areas. To simply extend the wireless coverage in these parts of the home, would I do the following?
1. Connect Express to the data drop with a network cable
2. Configure Express into Bridge mode
3. Configure wireless with the same network name ( SSID ) and security info as the AEBS
Would that work or am I missing anything?
tia,
Bill

Worked like a champ. The old configuration used WDS and the coverage was very spotty. The new config is basically a handful of AX acting as access points.
The one thing to be careful about it is your channel numbers... try not to overlap the same channel numbers. I used iStumbler to determine my coverage and only used channels 1, 6, and 11 and made sure that my "1" access points were no where near each other....

Similar Messages

  • Using Bridge and LR with same folders/files

    Having organized, edited and rated my photos using Bridge CS4 but recently started getting seriously into LR3 I still want to keep that file structure, either in a transitional period or indefinitely.
    I normally use Bridge to import the photos, then spend some time creating sub-folders (one folder per event), organizing them. I'm hoping that I can add those (already organized) folders into LR, but can't figure out how. I see how I can import the photos, but I don't want that as I want to keep them all in the same location (they're all organized on the hard drive as I want them), just have LR "see" them so I can further edit and rate them. How do I do that?
    I also want LR to understand and see the edits I've made to my RAW files as well as my ratings, keywords etc.
    Are there other things I should keep in mind when having my photos work with both Bridge and LR?

    It's possible to work the way you do, but with Lr it's a bit awkward, particularly if you start editing (developing) your images in Bridge.
    You ask: " I'm hoping that I can add those (already organized) folders into Lr, but can't figure out how."
    You have to import the images. Without importing nothing can happen in Lr.
    So, open the Import Dialog. If it shows only the small window of the Import Dialog, click on the triangle in the bottom left corner, to expand the window.
    On the left side you'll see the <Source> panel. navigate to the folder in question and click on it to select it. You will see all images in this folder in the main window of the Import Dialog.
    Then in the top center of the Import Dialog select <Add>.
    <Add> is for importing images that are already on the hard drive and you do not want to change their location.
    <Move> is for importing images that are already on the hard drive and you do want to change their location.
    <Copy> is for importing images from camera / memory card.
    By selecting <Add> Lr will import the images in their present folder and will display the folder.
    Your Bridge edits will also be imported because on import Lr reads the image file and the xmp-file where Bridge has stored the metadata of your edits.
    But this is true only for import. Should you then decide for an image that has been imported in Lr to edit it in Bridge again, these edits would not automatically be visible in Lr. This is so because with imported images Lr stores all edits in its catalog, and does not display the metadata from the xmp-file where Bridge saves edits.
    But you can make Lr read and display these additional Bridge-edits by doing a <read metadata from file>. But this is problematic because <reading metadata from file> will overwrite any Lr edits.
    So you see that because of the fact that Lr works with its catalog while Bridge does not, editing images in Bridge and in Lr is a recipe for frustration. It can be done, but it's awkward and prone to mistakes.
    Therefore I would suggest to bite the bullet and henceforth use Lr as your only editor. Import images from camera in Lr, do all your editing in Lr.
    Since you are used to do edits in in Bridge Camera Raw, Lr will pose no big problems for you.
    But if you don't want to let go of Bridge right away, I'd suggest you do at least one thing: After importing the images in Lr refrain from further editing these images in Bridge.

  • Can't label files in bridge, and problem with starred files

    I'm working with CS3 on saving raw files to jpegs, and I usually organize them by 5 starring my favorites as well as labeling them, and just in the last 2 days Bridge has been acting up and won't label the files. Also, it will 5 star them, but only about a 1/4 of them show up in the filter as being starred. Any ideas? I already checked my access, and I can read and write to them.... the only thing I can think of is that I ran a few updates a day or two ago.... help! this is getting really frustrating and slowing down my workflow...

    http://forums.adobe.com/community/bridge/bridge_macintosh

  • DIFFERENCE BETWEEN EXTENDED WITH HOLDING AND CLASSIC WITHHOLDING TAX

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
    HI
    What is the difference between classic with holding tax and extended with holding tax ...
    teja.k

    Check this site.......
    http://help.sap.com/saphelp_erp2004/helpdata/en/2d/936b3ae886616ae10000000a114084/content.htm

  • Bridge mode and extended mode together?

    I just received my new milk jug Extreme AC today, yay! I bought this in the hope that it might mitigate some of the reception issues I have been battling in my home. I currently have the 4th gen Extreme (the one with the hobbled radios) and the 3rd gen Express, and I would like to use the old Extreme in bridge mode while wirelessly extending to the Express from the old Extreme. (Yes, I would love to hard-wire but that isn't realistic right now.) Anyone have any success doing this, or any suggestions?

    It wouldn't be a wireless daisy chain as I have infrastructure
    Thanks for clarifying that, since it was not mentioned at all in your first post. We saw things like "wirelessly" and "I would love to hard wire, but....." and assumed (when we should not have) that you were talking about wireless for the network.
    hardwire the two Extremes together with the AC doing the DHCP heavy lifting.
    That would be best way to connect the two Extremes together. Set up the new "ac" Extreme as the main router, then connect an Ethernet cable from one of the LAN <--> ports on the new Extreme to the WAN "O" port on the older Extreme.  The setup utility will practically configure everything for you.
    I suppose I could do something similar with the Express but I am okay with the bandwidry tradeoff If it can wirelessly piggyback from one of the Extremes.
    As long as the Express is located where it can receive a good quality wireless signal from whichever Extreme, that should work OK. Extending with the Express is a compromise deal no matter how you look at it.......since even if you decide to connect to the Express using Ethernet, the port on the Express will only handle 100 Mbps.
    Strange as it seems, it is often better to take the bandwidth hit and extend using wireless  with the Express, since the signal will often be faster this way than using Ethernet.

  • Numerous problems with Airport Express 802.11n with DSL and extending WLAN

    Hi all,
    I have the following hardware:
    802.11b/g Airport Express with firmware 6.3
    802.11n Airport Express with firmware 7.3.2
    MacBook Pro
    iBook G4
    Mac Pro PowerMac 2x450 G4
    Up until now I had been using the old Airport Express as the base station connecting to my PPPoE DSL line, and it worked fine. I wanted to extend the range of this network, and got another newer Airport Express, the 802.11n model.
    First I tried to use the 802.11n to connect to the Internet and the old one to extend the network. Turns out the old one can't be used to extend a network, which is bad enough, but the 802.11n one refuses to connect via DSL for more than a couple minutes, then drops the Internet connection.
    So I tried downgrading the firmware to 7.3.0 and 7.3.1, but it didn't help. Did a hard reset, factory default reset, soft reset, nothing worked.
    Next I tried swapping the two, putting the old Express back on the DSL line and the new one as the bridge to extend the network (using WPA2). But the 802.11n complains that it can't access the network and flashes amber.
    Again, tried upgrading to 7.3.2, downgrading to 7.3.1 and 7.3.0, hard reset, soft reset. Nothing works.
    Any ideas?
    Cheers,
    Fairfax71

    I don't see any option in the Airport Admin Utility for the old Express for creating a WDS network, only to participate in one...?
    That is the option you want to choose.
    You could use the newer AirPort Utility to configure the older AX.
    Sorry, forgot to ask something else: The 802.11n Express is able to join the WLAN created by the 802.11b/g Express as a client, but not extend it, is that what you're saying?
    No. If you join the network the AX is simply acting as another wireless client and is not extending the network. The "extend" option is not available since the older AX is not 802.11n capable. You must use WDS.
    Use AirPort Utiity and follow these steps for both AX's. To set up the main AX:
    Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
    Open AirPort Utility (located in the Utilities folder in the Applications folder on a Mac, or in Start > All Programs > AirPort on a Windows computer). Select the main base station, and choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary. If the base station is using the default password of public, you will not be prompted for a password.
    Click the Wireless button, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
    Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
    Select the “Allow wireless clients” checkbox if you want client computers to connect to this base station.
    Click the Add button and enter the MAC address of the base stations you want to connect to this base station. If there is a base station listed that you’d like to remove from the list, select the base station and click the Delete (–) button.
    Click Update to send the new settings to the base stations in the WDS. By default, the “Allow wireless clients” checkbox is selected. If you deselect the checkbox, and later want to change the settings on the base station, you must connect to the base station’s LAN port with an Ethernet cable. You will not be able to connect to the base station wirelessly.
    To set up the second AX to connect to the main AX:
    Open AirPort Utility. Select the AX, and choose Manual Setup from the Base Station menu. Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
    Enter the same network password as the main base station, if necessary.
    Click the AirPort button, and then click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
    Click WDS and choose “WDS remote” from the pop-up menu.
    Enter the MAC address of the main base station in the WDS Main field. The MAC address is also referred to as the AirPort ID and is printed on the label on the bottom of the base station.
    Click Update to transfer the settings to the base station.
    This can be found on page 42 of "Designing AirPort Networks Using AirPort Utility" (direct PDF download).

  • Bridging multiple VLAN with sg 200-08 and wap321

    Hi all
    Equipment:
    ASA 5505
    2x gs 200-08
    2x wap321
    Is there a possibility, to bridge 2 VLAN between one and another side with two WAP 321 and use the AP's also as WDS Bridge to extend the Wireless Network?
    I need to extend the Range of the WLAN but also want to use 2 different VLAN on both sides of the network. There is no Possibility to establish a wired Connection, so i try to use the AP's in "workgroup bridge" mode, but i always can use only one VLAN on the other side.
    Thanks for any help

    Hi Luis
    The Problem is, there is no wired connection between the WAP321.
    The topology is like this:
    VLAN1------ASA5505--  --SG200-08---------WAP321             WAP321--------SG200-8-------VLAN1
                                                 I                                                                                                 I
    VLAN2---------------------------                                                                                               -----------VLAN2
    VLAN1 and VLAN2 are also available in the WLAN on 2 Different SSID's:
    SSID: inside -> VLAN1
    SSID: outside -> VLAN2
    If i understand the Cluster mode right,there is a wired connection required between the WAP321 .
    In meantime i tried to connect the WAP321 over WDS, but always only VLAN1 is available on the "right" side of the Network.
    Is there a Possibility, to Bridge multiple VLAN's over a WDS connection?
    Best Regards
    Dominique

  • I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

    I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

    You can associate files from the Bridge level and the Desktop level.
    In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
    If you want to open files from the Windows Desktop in CS4, these are the instructions:
    Do this from the Windows Desktop:
    If you want your image file to open in Photoshop and it doesn't, right click on it and choose
    Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

  • Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

    Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

    Would you please provide details about your setup?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Workflow issue with Bridge and everything else

    Short and sweet. Well, not really.
    I use windows - so as a result, for some reason unknown to man (after a decade of waiting), I still cannot see "previews" of most, if not all of any adobe software in the windows dialogue boxes.
    think PDF's and the registry hacks we have to do to "enable" previews. But on a mac I can?
    So I have to use bridge - a lot.
    Now when I have a linked image in illustrator (or whatever) and choose "reveal in bridge" it will hunt and drill down through a multitude of folders and display the image in it's native folder - which I can then open in photoshop for instance - edit it - and Illustrator will detect the change and update. Awesome.
    But aside from running a script to send a batch job to a program, it really doesn't "do" anything else that one would expect a "bridge" to do;
         I cannot create a "project" portfolio that would track a client project and all it's related documents.
         Or collaborate with a team.
         I cannot have non destructive edits of a document (such as using an instance of a file like lightroom does) - or "send copy to photoshop" and have Bridge stack the results.
         I cannot combine and tag collections of documents (make a database of stuff).
         I cannot ask Bridge to tell me which documents have placed documents, or (vice versa) which documents are placed into other documents - that would be so cool.
              imagine being able to select a jpeg or psd file and have the option to "Find documents using this file"
              or looking at a "project" and having a list of all first level documents with all their subsequent "placed content" listed all drop down expandable
    So my beef today is that I finally spent an hour messing about thinking I had something "wrong" and went through Bridge CS6 with a fine tooth comb trying to find out if anything had changed.
    and nope - it still doesn't behave as one would think it would.
    Currently, I have some documents that require monthly changes to images, which for the most part came from one photo shoot, and all have essentially the same perspective, appearance, lighting and shading, but all different products and I have a folder of "preformatted images". So monthly I really only need to update the images, and a bit of text. Being posters, InDesign whines a bit for vector art manipulation, so I stick to Illustrator for this job.
    But in Illustrator, I cannot choose another image to replace my linked image - without either;
         a: (reveal in bridge), select new replacement image - place as a new image, which then needs to be manipulated as the "old" image was, "remaking" all the adjustments, and then finally deleting the original linked image.
         b: (reveal in bridge) keep bridge open on the image I need (and it's name), go back to illustrator to open the "relink" windows dialogue and "blindly" browse till I find the image I want as shown in bridge.
         c: simply relink and browse blindly to find a file you can't see a preview of and guess, or drag and drop, or all the other non practical ways to replace the image.
    Option B gives the desired end result where the image I have in a clipping mask, buried in a document in a certain way, with certain effects, is simply replaced without impacting anything else.
         But this takes quite some time when there are a lot of images.
    So Bridge and its promised workflow functionality still isn't living up to it's purpose exactly.
    Bridge isn't bridging.
    With indesign, it's the same issue - you can't "relink" by revealing in bridge, choosing a "replacement" image and "update"
    Maybe a "relink with Bridge" choice in the Links menu?
    and in bridge, since Illustrator triggered the request, a button appears to "Replace" - once you finish browsing and highlighting the replacement image you need, just click it and it's done.
    So two issues -
    Why can't previews of adobe files be shown in windows explorer (still)?
         if they did, I'd really have no use for Bridge.
    Why isn't bridge actually communicating with the apps connecting to it?
    - and yes, I understand that I cannot ask bridge to go find a placed file and replace it with "this" file, but when illustrator "asks" for "this", bridge should be able to "respond" and give "that" since the app initiated the request.
    Bridge should be a workflow tool as advertised - it should literally be able to be a proper workflow hub for all things adobe (and be able to catalogue and track all design file type previews - corel files, cad, 3d, etc)... but as it stands it's just a glorified windows explorer without workflow options.
    Bridge hasn't been altered in years, and it's still lingering around - I think - so that we can simply see thumbnails, rather than just allowing each adobe program to make "previews" windows needs.
    I can change metadata in windows, I can use freeware to change it extensively.
    So aside from the "open in" options and the ability to browse all adobe file types, what's the point?

    I couldn't read all through your post as I am jetting out of here.
    Buy this:
    http://www.fastpictureviewer.com/codecs/
    and install it. It's relatively cheap. Screen shot is from Windows Explorer.
    Handles ID, PSD, etc., files as well. Though the preview uses greeked text for the most part for the ID files.
    Take care, Mike

  • Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files

    Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)

    It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
    Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
    Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues.

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • Multiple Problems with PDF InDesign, Bridge, and Acrobat Reader

    I create proof books with a blend of Adobe Bridge & InDesign.
    Here is my work flow: I will BOLD the errors I am having and need help with.
    Step 1.) I create contact sheets in Bridge and save them as PDF's
    Problem with Bridge ( I have another posting for this thread as well under Bridge) I cannot save PDF's larger than 400ish photos at 300ppi (important for my printer) without it saving as a blank PDF. COMPLETELY EMTPY! So I have to split up my photos into groups of 400 or less photos then patch them back together.
    Problem with Acrobat: If I patch those PDF’s back together with Adobe Acrobat (a suggestion from another person on here) they save great but I get an error when I try to import them in indesign. The error reading: ERROR. Cannot determine page count.
    Please open the PDF file in Acrobat, do a “Save As…” and try again. (99)
    Step 2.) I use a script (MultiPageImporter2.2.1.jsx) to import the PDF's into Indesign. (if saved as one pdf in acrobat I get the above error)
    Problem With InDesign: I run this importer script in InDesign to create my books with a template I use from my printers. Well since I have to import multiple pdf with multiple pages ( because I can’t piece them together without the above error. Then I have this problem:
    I place a pdf with 1-226 pages in. I start this on page 1.
    I place the next pdf with 1-141 pages in. I start this on page 227.
    An error pops up that says I MUST start my import on page 226!!!!!!!!!! I don’t want to import on page 226 because I have two photos on that page!
    I tried it several ways and no matter what I loose my last page of my first import.
    PLEASE someone help me! I feel like I might be doing something really silly but I’ve spent 7.5 hours today working on this books with error after error.
    I have done all the updates on my computers and nothing works. I use two macs and both have the same errors. I have a mac-book Pro | snow leopard and a Imac | snow leopard.
    Thanks much!

    All your problems seem to stem from the PDFs that you are making from Bridge.  What you are describing should be perfectly possible, but the fact that Bridge doesn't want to make a PDF with more than 400 photos and it all goes downhill from there makes me suspect Bridge.
    Here's a plugin that may help?  Looks pretty cheap for what it does.
    Apart from that I'd try to clean up the PDFs that Bridge is producing if Indesign doesn't like them.  One way would be to print to a new PDF, after you've combined them as necessary.
    As to the last pronlem you mention, where it forces you to place on page 226, have you tried creating a blank page 227 first, before you try placing?

  • Issue with CS3 Bridge and Flash 10?

    Im not finding any help and Im trying to trouble shoot this myself, since I updated to Firefox 3.0.8 apparently the latest version of flash was updated at the same time?
    My computer shows Flash 10.0.22.87 (running XP) as being installed in programs but tools>addons> plugins shows 10.0 r22. Is this how it is supposed to be? I've removed and reinstalled this a few times but they never match up.
    I've tried back dating to older versions of FF when things ran smoothly as this is the only issue Ive ever had with FF in the years I've used it, but that doesn't seem to help because its still the same flash plugin. Ever since this update I haven't been able to use some other programs such as Adobe Bridge and even AOL since they both have flash components I guess?
    I've done a forums search and I keep thinking it has to be something simple like a setting that needs to be changed but I cannot find it. I did delete the old flash folder as suggested in some of the other threads but no change. If anyone has even a decent lead please reply as I've been working on this for 3 days in and out of safe mode but even then I cant run any programs with flash. I have no crash logs because the entire system locks up and I have to do a hard reset. Thank you.

    Hi Cyboide,
                   Actually, I am new to Flash platform. I have developed a flash file and (.fla and .swf files are created) this .swf file I need to use within our project(based on Java) which is to be run in localhost. So, I had followed these steps as I saw in Google Help:
    1.) I had opened .fla file(First.fla) and goto File -> PublishSettings -> Formats tab.
    2.) In this tab, I had selected .html and .swf checkboxes and deselected remaining all.
    3.) Click on "Publish" button and then "OK" button.
    So, a html file with same name as that of .fla/.swf file is created in the same folder beside thes .fla and .swf files.
    I think it is clear upto this point.
                     Now,
                                If I open my .swf file simply in a browser window(Mozilla), I can view the contents. But, the Buttons, checkboxes, Combo-boxes etc., controls have no access(i.e., any animation, tweening works well but  there is  no user interaction).
                               Else, When I open my project in localhost(Java project), here somewhere i call my flash file(i.e.,First.swf file). But, the contents of .swf file are not viewed in the case of Mozilla Firefox. But, it works well in InternetExplorer browser including my whole project(i.e., all localhost). Hence, no problems when opened in IE.
    Please reply me as soon as possible. It is the only issue to end up my project.
    Waiting for replies.....
    thanks a lot in advance..
    Srihari.Ch

Maybe you are looking for