Bridge and Photoshop CS4 will not recognise the images shot in NEF file

Shot in Nikon D810 with NEF file but the images will not recognise with Bridge and Photo
shop CS4

That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run.  You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
Mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6

Similar Messages

  • I updated the iphone software from 4.3 and now it will not recognise the sim card or complete activation. I have iphone 3gs, itunes 10 and windows 7

    Hi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
    Kulbirfromhuntingdon

    Hi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
    Kulbirfromhuntingdon

  • I have an existing iPod account and now have a new nano but my existing account will not recognise the nano. How can I get this to recognise my new device?

    I have an existing account with an iPod classic device. I now have a new nano and want to add this as a secondary device. However when I connect this my account will not recognise the new device. How do I resolve this?

    I have 4 iPods all utilizing iTunes on the same computer.  If you open iTunes and THEN connect the new nano, it should automatically recognize it.  Does it give you an error message?

  • HT5567 my i phone 5  has frozen during the os ipgrade and will not reset and i tunes does not recognise the phone

    my i phone 5  has frozen during the os ipgrade and will not reset and i tunes does not recognise the phone

    What is showing on the iphone screen?
    Try this:
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    Make sure itunes is updated to the lates version on the computer.
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/

  • Photoshop CS4 will not launch after installing Yosemite.

    Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

    Here's the fix I found, by way of an explanation...
    Snow Leopard prompted me on my first startup with the following error:
    "There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
    The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
    Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
    So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
    Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
    Thanks for the ideas!

  • Photoshop CS4 will not Start

    Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
    I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
    I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
    Thanks in advance!!

    I'd look into doing a couple of tests:
    1.) Move those PAT files elsewhere
    2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
    3.) Reboot and see what happens.
    Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
    A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
    Good luck,
    Hunt

  • Photoshop CS4 will not refresh or update view

    Hello,
    My Photoshop CS4 will not update / refresh the viewport after any change to the layers or settings. The view will only refresh if the view is changed, such as the hand or zoom tool. This makes Photoshop nearly usesless. Did some looking around the net and have seen a few responses to situations similar to this but none of them are regarding a Mac. This is my work computer so you can understand my frustration.
    Hardware Overview:
      Model Name:    Mac Pro
      Model Identifier:    MacPro4,1
      Processor Name:    Quad-Core Intel Xeon
      Processor Speed:    2.66 GHz
      Number Of Processors:    1
      Total Number Of Cores:    4
      Memory:    6 GB
    NVIDIA GeForce GT 120:
      Chipset Model:    NVIDIA GeForce GT 120
      VRAM (Total):    512 MB
      Vendor:    NVIDIA (0x10de)
    LED Cinema Display:
      Resolution:    1920 x 1200
      Depth:    32-Bit Color
      Core Image:    Hardware Accelerated
      Main Display:    Yes
      Mirror:    Off
      Online:    Yes
      Quartz Extreme:    Supported
      Rotation:    Supported
      Connection Type:    DisplayPort
    Any ideas on how I can solve this would be greatly appreciated, I need to use PS on a daily basis here and this is killing me to be unable to use it.
    Thanks,
    Isaac
    Designer at The University of Texas at Dallas

    DesignbyIsaac wrote:
    NVIDIA GeForce GT 120:
      Chipset Model:    NVIDIA GeForce GT 120
      VRAM (Total):    512 MB
      Vendor:    NVIDIA (0x10de)
    I do not see that card in the list of supported cards:
    http://kb2.adobe.com/cps/405/kb405711.html
    Mac OS graphics display cards We tested the below cards on Mac OS 10.5.4 and 10.4.11.
    The following cards were tested only on Mac OS 10.5.4: 8800GT, iMac 8800 GS, and 8600M.
          MACTEL iMac 8800 GS 512 MB
          MACTEL 8800 GT 512 MB
          MACTEL Radeon x1900 512MB
          MACTEL nVidia Quadrofx 4500 512MB
          MACTEL nVidia 8600M 256MB
          PPC nVidia 7800 256MB
          MACTEL ATI HD 2600 MAC 256MB
          17" MACTEL iMac x1600 128MB
          Macbook Air intel GMA X3100
    Note: Due to technical issues we enable OpenGL for the 7300GT, but we had to disable Advanced Drawing and 3D Acceleration.

  • Photoshop CS4 will not open after system upgrade to Mac OSX Yosemite

    I recently upgraded to Mac OSX Yosemite and unfortunately, my Photoshop CS4 will not open. The message says it requires Java SE6. I now have Java 7 update 71. I would appreciate suggestions from anyone who can help to resolve this problem. Thank you.

    Thank you very much, Chris Cox. I followed the link in the error message to Apple's support page, downloaded and installed the Java for Mac OSX.
    I can now open my PS CS4 again. What a relief!
    Many thanks for your fast response and accurate advice.
    Cheers!

  • Photoshop CS4 will not open after upgrading to Mac OSX Yosemite

    I recently upgraded to Mac OSX Yosemite and unfortunately, my Photoshop CS4 will not open. The message says it requires Java SE6. I now have Java 7 update 71. I would appreciate suggestions from anyone who can help to resolve this problem. Thank you.

    Thank you very much, Chris Cox. I followed the link in the error message to Apple's support page, downloaded and installed the Java for Mac OSX.
    I can now open my PS CS4 again. What a relief!
    Many thanks for your fast response and accurate advice.
    Cheers!

  • Equium M50 will not recognise the LAN port - error: Network Cable unplugged

    I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
    I used to connect via an 'ADDON' Modem/ADSL Switch and had no problems. I then replaced the ADDON with a 'NETGEAR' DG834G ADSL Modem/Router to gain the wireless port, and since then my machine will not recognise the LAN port. <error: Network Cable unplugged>.
    I know that the cables are OK as I used them with other laptops and had no trouble. I can also plug in a PCI card to connect without any problems. It looks to me as if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.
    Anyone out there with a similar experience and some advice/suggestions?
    PLEASE

    Hi
    For me it doesnt show like a LAN card problem but your router is a problem.
    Check the device manager if the LAN card was properly recognized. If there are no yellow exclamation marks so everything is ok!
    You can try to delete the LAN card from the device manager and after new reboot install the LAN driver again.
    The issue has stared after installing or connecting the new Netgear modem router.
    Therefore I would recommend to checking firstly the settings or to update the firmware on this router.
    I have found additionally these useful websites
    http://compnetworking.about.com/od/windowsnetworking/f/cableunplugged.htm
    http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20381405.html

  • Photoshop Elements 11 will not read the new Nikon Raw/NEF

    Photoshop Elements 11 will not read the new Nikon Raw/NEF (from Nikon D750) files even though codec has been downloaded - what do I do?

    Unfortunately your software pre-dates the camera. Consider buying PSE13. But it is possible to download and install the latest free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in PSE11 (keep your NEF originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.8
    Mac download (.dmg file) click here DNG Converter 8.8
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • HT1414 Hello, I have had to restore my iphone 4 to its factory setting as I had missed a number of updates and my computer was not recognising the device. I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.

    Hello, I have had to restore my iphone 4 to its factory setting as I had missed a number of updates and my computer was not recognising the device. I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.
    Would you know how to resolve this issue?
    Many thanks.
    Nilou

    I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.
    Would you know how to resolve this issue?
    It's a pre-installed app and therefore cannot be deleted so you may have inadvertently moved it onto a screen or into a folder, check the utilities folder as this is a common one for it to disappear into.  Check all screens and folders and do a search in Spotlight, it will tell you if the app it still on your iPhone but unfortunately not where it is. If you find it on one or your screens or in a folder, press the icon until it wiggles and then drag it back to where you want it.  Alternatively you can reset your home screen in Settings>General>Reset>Reset Home Screen Layout.

  • My mac will not recognise the camera on my iphone so i cannot move my photo's

    my mac will not recognise the camera on my iphone so i cannot move my photo's. it has worked fine in the past. i recently moved itunes to an external hard drive and that will still connect for music etc. but the phone does not show up in finder at all the mac just keeps beeping and saying no camera found any ideas please?

    Hi Sylvia's iMac,
    Welcome to the Apple Support Communities!
    It sounds like you need to reset the administrator password on your computer. Please follow the instructions in the attached article for information on how to complete this process. The article has instructions for Snow Leopard (10.6) and earlier, but there is also a link within the article for assistance in Lion (10.7) or later.
    OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support
    Cheers,
    Joe 

  • I am having difficulty in connecting my IPAD 2 to my DRAYTEK 2820n router.  Any suggestions as it will not recognise the password but my IPHONE 4 is perfectly OK.

    I have just purchased an IPAD 2.  I have tried to connect it to my DRAYTEK 2820n router but it will not recognise the correct password.  My IPHONE 4 has no problem in connecting to this router using the same password.  I understand that the wi-fi connectivity is the same for the two apple products so cannot understand why the IPAD will notr connect.  Has anyone any suggestions?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does  I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark Ii

    My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does  I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II  Camera. 
    The program used to import and transcode the Can 5D footage but no longer does.   The program freezes often and looses my projects as well.  Hard to make a living when your editing program is on strike!

    My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does  I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II  Camera. 
    The program used to import and transcode the Can 5D footage but no longer does.   The program freezes often and looses my projects as well.  Hard to make a living when your editing program is on strike!

Maybe you are looking for