Bridge and PSCS5 slow and unstable after update

I allowed my system to install the updates for Bridge, ACR and PS CS5. Since then everything is unstable.
I open bridge and click an image. I'm first told Bridge is not responding. After a couple minutes it will respond and open ACR. If I click "OPEN" ACR closes but the image doesn't openin PS. PS opens but again I'm told "not responding"
I'm running windows 7 64-bit with PS CS5 64-bit. I have a quad core an 8gb of ram I have dual video card and dual monitors
(if you need any other technicalinfor please ask) All was fine until the update
Marc

Interesting, I'm having a similar problem since the latest update.
TIFF files won't open in PS when clicking on them in either Bridge or Mini-Bridge from within PS. In Mini-Bridge right clicking the image then "Open Image" does load the image in PS. However, in Bridge the only way is to right click on the image and choose "Open in Camera Raw"
I've made sure that PS CS5 is selected as the preferred program for TIFF files, but to no avail. The same applise to PSD files. Although, RAW files bring up Camera RAW by double clicking on them.
There must be an easy answer... and hopefully someone in the know sees these posts.
Cheers,
Michael

Similar Messages

Very slow and unstable after update...

Hello!
After update yesterday, my Arch64 was very slow and unstable... Eclipse IDE crashes, Firefox uses +200mb and Xorg uses +15% of CPU. Xorg lags when I'm going to switch between virtual desktop in KDE... very strange!
Some confs below:
[root@Selene hlegius]# uname -a
Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64 Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz GenuineIntel GNU/Linux
[root@Selene hlegius]# free -m
total used free shared buffers cached
Mem: 3947 1121 2826 0 30 466
-/+ buffers/cache: 624 3322
Swap: 0 0 0
[root@Selene hlegius]# kde-config -v
Qt: 3.3.8b
KDE: 3.5.9
kde-config: 1.0
[root@Selene hlegius]# X -version
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH x86_64
Current Operating System: Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64
Build Date: 21 June 2008 11:53:34AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Any ideas ?

Rexilion wrote:
I misread that the in kernel driver of v3.12 was working properly. THat way you can figure out what exact change broke performance by testing different development kernels.
There is an in-kernel driver in staging called rtl8192u. It received a lot of changes in v3.12. Maybe try v3.11 and see if that works?
it didnt work in kernel 3.12, but with https://aur.archlinux.org/packages/dkms-8192cu/ it worked perfect
in kernel 3.13 it is horrible both witht he stock driver or with the AUR package.

Why does my iPhone 4 gets very lag and unstable after updated to iOS 5.1?

I have been using iOS 5.0.1 previously without any problem and smooth, however after i updated to iOS 5.1, my phone is getting unstable.
Every time when i unlock my screen, it may lag for a few seconds. This issue does not happened when i'm using iOS 5.0.1. I did restore my phone using iTunes but the issue is still there. Anyone able to help me pls?

Try restarting your iPhone 5 by holding down the on/off and the home buttons at the same time until you see the Apple logo. Then give it a try.

Problem wireless and Bluetooth after update Lollipop

problem wireless and Bluetooth after update Lollipop
wireless and Bluetooth not working
and wireless cannot be enabled

Moooss wrote:
thank you for all but i have problem and sony mobile update engine setup 2.15 can't be download I need program sony mobile update engine setup 2.15 another this link http://software.sonymobile.com/ns/omsi/1/common/installfile/Sony_Mobile_Update_Engine_Setup-2.15.6.2...
Sony Update Software (also known as SUS) has been discontinued some time ago, and now the update process is entirely integrated in PC Companion and Mac Bridge. Just Download PC Companion from here:
http://www.sonymobile.com/gb/tools/pc-companion/
Open PC companion -> Support zone -> Phone/tablet software update -> Repair my phone/tablet (blue link style). Follow the steps given, do not connect your phone until prompted to press volume down while plugging USB cable.
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

My ipad is locked and disabled after updating to iso 7. I never had a password on it.

my ipad is locked and disabled after updating to iso 7. I never had a password on it.

Even though you never had a passcode enabled, try the help here > iOS: Forgotten passcode or device disabled after entering wrong passcode

I lost safari from home screen and settings after updating to iOS 7.0.2 on Iphone 5

Lost safari from home screen and settings after updating to iOS 7.0.2 on Iphone 5

Settings > General > Reset > Reset Home Screen Layout
If no joy, check whether you have Restrictions set.

HT6117 I don't have Safary and facetime after update with IOS 7 my Iphone 4S, and sometimes the Wife is no able.

I don't have Safary and facetime after update with IOS 7 my Iphone 4S, and sometimes the Wife is no able.

Howdy syafiqahmad,
If your iMessage and FaceTime still hasn't activated by now, I would recommend you use this specific section of the following article as long as you verify you've done all the other troubleshooting from it for this issue:
If you get an error when trying to activate iMessage or FaceTime
If you're using an iPhone, contact your carrier to make sure that you can receive SMS messages.
Contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling

Cannot backup and sync after updated iTunes

Cannot backup and sync after updated iTunes. Have tried to hard reset iPhone (all data lost- sad) and reinstalled iTunes. Still cannot work.

It sounds like you bough the song only, not the song and the ringtone.
Ringtones via itunes are available in the U.S. only.
In the U.S. to make a ringtone you:
Buy the song with a bell - 99 cents
Find the song in your library and click the bell
This bring up the editor.
You edit the song to the portion you want.
Then click buy to purchase the ringtone - another 99 cents.
Then it shows up in ringtones and you can sync.
As I said, this method of creating ringtones is available in the U.S. only.
There are, however, many ways to make ringtones:
http://www.iphoneatlas.com/2008/01/02/guide-the-many-methods-for-using-custom-ip hone-ringtones

Cannot open apps iPhoto and Aperture after updates

Cannot open apps iPhoto and Aperture after updates. I'm operating ML on mbpro. Now apps will not open. Simply that.

Not simple, if as ML implies you are running Mountain Lion! If you only mean Lion, then it would be useful for you to open another User Account, and as that User test to see if either app will launch?
Ernie

Lost all contacts and data after update iOS 7.1.2, how to recover all the data?

lost all contacts and data after update iOS 7.1.2, how to recover all the data?
it's very important to me...

Restore from your last backup file.

Grey screen and ? after updating any answers please?

Grey screen and ? after updating my Mac Book Air?
What next please?
Anyone else had this problem?

Something appears to have gone wrong while running the updater. Use the MacBook Air's original thumbdrive or the recovery partition(if it's running 10.7 or newer) to repair the internal drive or install a new OS.
(83104)

Ive lost all contacts and messages after updating to ios5 ??? Help

Ive lost all my Contacts and messages after updating to ios5 ??? Help
How can I get them all Back ???

Have had the same issue - and conflicts between PC, Ipad and Iphone. Gained 6000 names and lost contacts or contact contents. Have had to edit on PC. Spoke with Apple Express and was advised to do editing only on PC and then sync. Was also told not to use Icloud until problems had been solved. Have spent last two weeks recreating my contacts list.
Haven't yet bothered to reclaim my missing paid ring tones.

Problem with printing and scanning after updating to Mavericks for my Photosmart C7180

After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format. I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc. I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer. What do I do now?

Hello Cyd23, welcome to the forums!
I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
However, there are work around options for scanning that may help and work!
Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope that helps!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

[SOLVED]no sound in both headphone and speaker after update (alsa)

No sound after update. But, I can hear sound in headphone after install pulseaudio, while there is no sound in speaker (after plugging out headphone). I have tried some methods in related wiki articles, such as alsa and pulseaudio, but not works.
My enviroment is arch64, kde. I have installed lib32-alsa-plugins lib32-libpulse lib32-openal.
Anything others I can do? Thanks for advance.
Here is the output:
xym@Arch ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
xym@Arch ~ $ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 30162 1
snd_hda_codec_realtek 41295 1
snd_hda_intel 37000 3
snd_hda_codec 150305 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
xym@Arch ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Jan 15 11:09 by-path
crw-rw----+ 1 root audio 116, 7 Jan 15 11:09 controlC0
crw-rw----+ 1 root audio 116, 6 Jan 15 11:09 hwC0D0
crw-rw----+ 1 root audio 116, 5 Jan 15 11:09 hwC0D3
crw-rw----+ 1 root audio 116, 4 Jan 15 12:17 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Jan 15 12:17 pcmC0D0p
crw-rw----+ 1 root audio 116, 2 Jan 15 12:17 pcmC0D3p
crw-rw---- 1 root audio 116, 1 Jan 15 11:09 seq
crw-rw----+ 1 root audio 116, 33 Jan 15 11:09 timer
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitchs
Playback channels: Front Left - Front Rightss
Limits: Playback 0 - 64s
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 31 [100%] [33.00dB] [on]
Front Right: Capture 31 [100%] [33.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [off]
Front Right: Playback 31 [100%] [12.00dB] [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
xym@Arch ~ $ speaker-test -c 2
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
1 - Front Right
Time per period = 5.651882
0 - Front Left
1 - Front Right
Time per period = 5.973485
0 - Front Left
I can't hear any sound during this test.
/etc/modprobe.d/modprobe.conf
blacklist snd_intel8x0m
Last edited by XuYimin (2014-01-16 12:18:02)

straykat wrote:
XuYimin, can you please give more info on what you mean by "update (alsa)"? There is no "alsa" package in Arch as alsa & it's modules are part of the (linux) kernel.
As you have already gone into alsamixer to ensure the appropriate channels are unmuted & set at the desired level, have you also gone into your KDE systems settings -> Multimedia -> Audio and Video Settings & rechecked your settings?
sorry，it's really misleading in my words.what i want to say is 'no sound after update, and the sound system is alsa.'
i'm sure the approiate channels are unmuted. in the Video Setting, I tested all sound cards in the list, But i can't hear sound.

Sync problems with 3gs and itunes after update iOS 5.0

I am using a Vista PC with iTunes10.5. After updating my 3gs to iOS 5.0 I am not able to sync the phone. iTunes recognizes my iphone and then stays syncing at the backup stage....I deleted all my apps on the phone and deleted previous backups and tried syncing again, but in vain. I am clueless....

I just plugged it into my netbook and its Restoring it on there so thanks, I know I will lose what I never had backed up but just be happy if it works. Fingers crossed this fixes it.
Edit: It didnt work, come up with iTunes isnt connected to the internet then the restore fails

Bridge and PSCS5 slow and unstable after update

Similar Messages

Maybe you are looking for