Bridge bug with .ste files?

I have been having a problem recently, with Bridge crashing. The issue has started in the past few weeks, after I downloaded some Adobe updates. I have updated my video drivers and done everything else I can think of but I continued to have the problem.
Any suggestions?

Bug, not likely, but contaminated file, perhaps. If the crash happens with one folder, then purge the folder and let it rebuilt. Also, compact cache to get rid of orphans and reduce cache size.
A crash can be more likely if you change folders before the cache is finished building (spinning arrow on bottom).
Other options, defrag the hard dirve, purge all cache, reset preferences if none of this works.

Similar Messages

Bridge crashes with .thm files (no questions just info to share)

Just a heads up. Bridge 2.1.1.9 began crashing after I upgraded the firmware on my Canon d60. I shoot in raw and was just dragging the entire folder file onto my desktop to view the images in the folder.
I found that if I trashed the .thm extension files (which I don't need anyway)then Bridge allows me to view the files in the folder. If I don't, it crashes.

I'm actually experiencing the same problem with my Bridge CS3. The files are already transfered from my camera and are in their own folder. I just checked, and I the same files are viewable in Bridge CS2; but I kind of hate to use CS2 just because of that one stupid folder.
Not to start a whole RAW vs. JPEG debate, but I'm seriously considering saying the heck with this little RAW experiment I've been trying lately if this keeps up.

Bug with .ics files !!

Hi
I have a web based calendar that sends me bookings and deletions via .ics files. I believed that iCal was fully functional with vCalendar format.
ICal will accept the booking but will not delete it. (Outlook works fine with these files)
The code is:
Bookings
BEGIN:VCALENDAR
VERSION:2.0
METHOD:PUBLISH
BEGIN:VEVENT
ORGANIZER:MAILTO:[email protected]
DTSTART:20101022T070000Z
DTEND:20101022T080000Z
LOCATION:Look In The Diary
UID:[email protected]
DTSTAMP:20101004T074311Z
SUMMARY:Session with Max Scianna
DESCRIPTION:Email address: [email protected]\nTelephone: 07968 238846\nNotes: Test session 71
PRIORITY:5
CLASS:PUBLIC
END:VEVENT
END:VCALENDAR
Delete:
BEGIN:VCALENDAR
VERSION:2.0
METHOD:CANCEL
BEGIN:VEVENT
ORGANIZER:MAILTO:[email protected]
DTSTART:20101022T070000Z
DTEND:20101022T080000Z
UID:[email protected]
DTSTAMP:20101004T074311Z
STATUS:CANCELLED
END:VEVENT
END:VCALENDAR
Am I missing something obvious here or is it a bug?

Hi
I have a web based calendar that sends me bookings and deletions via .ics files. I believed that iCal was fully functional with vCalendar format.
ICal will accept the booking but will not delete it. (Outlook works fine with these files)
The code is:
Bookings
BEGIN:VCALENDAR
VERSION:2.0
METHOD:PUBLISH
BEGIN:VEVENT
ORGANIZER:MAILTO:[email protected]
DTSTART:20101022T070000Z
DTEND:20101022T080000Z
LOCATION:Look In The Diary
UID:[email protected]
DTSTAMP:20101004T074311Z
SUMMARY:Session with Max Scianna
DESCRIPTION:Email address: [email protected]\nTelephone: 07968 238846\nNotes: Test session 71
PRIORITY:5
CLASS:PUBLIC
END:VEVENT
END:VCALENDAR
Delete:
BEGIN:VCALENDAR
VERSION:2.0
METHOD:CANCEL
BEGIN:VEVENT
ORGANIZER:MAILTO:[email protected]
DTSTART:20101022T070000Z
DTEND:20101022T080000Z
UID:[email protected]
DTSTAMP:20101004T074311Z
STATUS:CANCELLED
END:VEVENT
END:VCALENDAR
Am I missing something obvious here or is it a bug?

2.1 Bug with uploaded files?

Hi,
I'm not sure if we're posting bugs to the forum but i'll just post it up here anyway..
I'm using HTMLDB 2.1 running on Oracle Express and uploaded a javascript file (into 'static files') so that i could reference it from a page.
My page was working fine when all of a sudden the page started to produce an error. The error was being caused by the fact that it could no longer find the javascript file (i'd been using it and testing it fine for an hour or so with no errors)..
The file was was referenced from the page as :-
<script language="javascript" src="#FLOW_IMAGES#LinkMenu.js" type="text/javascript"></script>
When I looked in the 'static files' section my javascript file was no longer listed. I thought that maybe I had accidentally deleted it (I was 99.9% sure i hadnt ) .. so I tried to upload it again but received a 'unique constraint violated'..
Looking in WWV_FLOW_HTML_REPOSITORY it seems that my file still had an entry and yet did not appear in 'static files' view..
I've sorted it out now but thought I'd just post my rather unusual problem.
Cheers,
Paul Ashton.

Well, I was wondering if I was being hasty using the word 'bug' (sorry to those who it may offend ;) )..
So, I'll accept some 'operator' error for this... however its probably still worth sharing..
I found the cause of the problem to be an unqualified delete on the htmldb_application_files 'table'... this is the erroneous statement :-
DELETE FROM htmldb_application_files;
-- WHERE name=:P18_FILENAME;
I'm working on a new file upload/management application and I had mistakenly commented out the WHERE clause. However, it did leave me in the odd situation of the record still remaining in the WWV_FLOW_HTML_REPOSITORY table that resulted in the unique constraint violation...
Cheers,
Paul Ashton.

5.1.2 Audio bug with AIFF files

I've encountered a strange bug after upgrading to 5.1.2 today. I have 3 Macs with FCP (all upgraded to 5.1.2 today). Was working on a project at work on one of them today and everything worked fine. I imported an AIFF file and decreased the levels on it as part of the project.
When I brought my project home (I use hot swap hard drives), I went to adjust the levels of that same AIFF file within my project. However, the viewer pane went half black, it did not show me any bit of the audio file and it's peaks. However, I could still adjust the levels. It just seemed to be that there was some sort of video display bug when I tried to adjust the AIFF file in the viewer.
I looked at some other audio files (recorded through the voiceover control) and they appeared fine in the viewer. Only AIFF files gave me this bug. To try and remedy the problem I tried other AIFF files and also tried restarting the project, etc. Nothing cleared up this problem though. Anyone else experience this?
Ted

Why did you post this in the LiveType forum?
I would recommending posting your question in the Final Cut Pro forum.
Have you tried trashing your preferences?
Anyways... here is a thread with a similar problem:
http://discussions.apple.com/thread.jspa?threadID=656515

Bridge: problems with exporting files onto hard drive

Hi -- I regularly export my files on Bridge to my hard drive and this morning it is not working. It goes so far as to show me the job process box (with the bar that shows the level of completion), but after that nothing happens. The bar is blank and photos are not exported. Anybody have any ideas as to why and how to fix this?

A lot more DETAILED information will be needed before anyone can help you.
Bridge doesn't import or "export" anything. Your files are never "in" Bridge. Bridge simple reflects the location of the files wherever you put them on your disk(s). When you move them (not "export" them), they're simply moved or copied, depending on their location, to a new location.
In any event, more info from you is needed.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Audio bug with WAV files: use mp3, not wav for syncing long audio files

Just a tip:
I've noticed another audio bug in Presenter (including 7.05) but there is a workaround. I often export the audio as a single, long clip from pre-recorded lecture videos, and sync it with the powerpoint slides in Presenter. I've found it easiest to import the long audio file into the first slide, then sync using the Edit Audio window. I find that much easier to use than the Sync audio window.
However, If you use WAV format for the imported audio file, sometimes Presenter will simply refuse to play back anything beyond about 5 minutes into the timeline in the Edit Audio window. Nothing fixes it - restarting, re-importing, etc. However the problem goes away if you save the audio as mp3.
Ellen
http://thedesignspace.net

Why did you post this in the LiveType forum?
I would recommending posting your question in the Final Cut Pro forum.
Have you tried trashing your preferences?
Anyways... here is a thread with a similar problem:
http://discussions.apple.com/thread.jspa?threadID=656515

Bridge bug with DICOM images

Photoshop supports DICOM images, but Bridge does not show DICOM image thumbnails, and I have not figured out how to open DICOM images in PS from Bridge.
It seems the only way to open DICOM images is from the File..Open.. menu in Photoshop.
TomS

It looks like I need to add a .dcm suffix and change the "Open with" property of .dcm to Photoshop to image thumbnails.
I'm using OS X 10.6.8.
The files have no suffix.
The icon displayed in Bridge is a, top to bottom, dark grey to light grey gradient with the word "exec" in green text in the upper left hand corner.
Apple's finder also displays the same icon.
Bridge wants to open the file in Terminal.
If I change the "open with" property of the file to PS, I can make Bridge open it in Photoshop, but I still get no thumbnail in Bridge.
If I change the "open with" property to PS and I add a .dcm suffix, then Bridge creates a proper thumbnail.
OS X is generally not very picky about suffixes so I never thought of adding .dcm.
Thanks
TomS

Lightroom 2.1 History Bug with Edited File

I downloaded Lightroom 2.1 and now when I edit a file in Photoshop and then it comes back into Lightroom, if I click on one of the Presets, such as a B&W preset, then there is no way to get back to the edited file in color. The first entry in the History is the B&W preset, and I can't undo past that point to return to the color version of the edited file.
Seems like it's not making a "edit in photoshop" history item that allows me to return to the original.

I'm back trying to sort this problem out (got distracted for a couple of days by trying to get my monitor calibrated).
Rearranging the folder structure didn't help. But I now have a better organized catalog, so that's ok :)
What I did find is that if I import files into lightroom using the "file/import photos from device", then I can edit them normally afterwards (that is, when I save the file in photoshop cs3, the new file gets picked up correctly by lightroom and gets correctly stacked with the original). This is true even if the new files get added into the same directory structure that I'm having troubles with.
So it looks like the directory structure is a red herring. It looks like the problem is in the catalog, with the way that lightroom originally imported my files. I created my original catalog by allowing lightroom to read my elements 6 catalog.
It seems that I have this edit problem with all catalog entries that were imported from elements 6, but I don't have any problem with catalog entries that lightroom brings in directly (either through "import photos from device" or by adding a new folder to the lightroom catalog).
So right now it looks like there is a problem with the elements catalog conversion.
Is this a problem that anybody else has seen? Any suggestions for getting around it?
Doug

Bridge CS6 open file bug with Hasselblad RAW file

There is a bug in Bridge CS6 (or RAW editor?) with (some) Hasselblad RAW files. I have a set of FFF files that I can use and open without problems in Bridge CS6 (5.0.0.399 x64). But one file of them does not show a preview icon and when I try to open it in PS6 or RAW editor, I get an errormessage "unexpected end of file...". When I open the same file in Hasselblad "Phocus" software there is no problem. I can see the preview thumb and I can play around with the file and even export to TIF or DNG without any trouble. I can even open the exported DNG in PS or Bridge/RAW editor then.
Well, you might say I should not care for a single file but it leaves a bad taste, when the Hasselblad software can handle the file without problems...
If some developer want to take a look at this I could provide original files.

Curt Y wrote:
Also, be sure to use a card reader for file transfer as a camera transfer can introduce errors.
I work with a Hasselblad medium format camera. I do not have a CF card in use. And I can tell that this worked absolutely flawless for many years. I NEVER had corrupted files caused by transfer. Many photographers using pro medium format cameras work the same way (Phase One, Leaf, etc.). They do not use CF cards but firewire cable. the problem arised when I started using the CS6 Bridge software. And it turned out that I get more and more corrupted files which appeared to be fine before. So from one shooting i.e. 1 file of 100 was corrupted first. Since I started using Bridge and changed RAW settings and worked with the same files after some days I have 5 corrupted files of 100 now. And NO it is not my system. It works fine with other camera RAWs where I have absolutely no problems. It is only the Hasselblad files. Though I still can open the Hasselblad RAW files with the Hasselblad software. The problems are only with the Bridge (respectively the raw editor) in combination with the Hasselblad files.
To me it looks like CS is corrupting the files since they worked fine at first - even in CS and after some days playing around in CS the appear to be corrupted. Funny that I can open the same files without problems using a different software - isn't it? ;-)
thanks for the link I will try it.... :-)

Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata

The cmd-keys / shortcuts doesn't work in the xmp file info panel btw. in the xmp / iptc fields (e.g. cmd+c, cmd+v, ...) of Adobe Bridge CS6 (Mac OS 10.6.8 and 10.7.3). You are not able to cut and paste info from one box to another like previous versions.
This bug only appears in the xmp file info window (opened via alt+i) in Bridge CS6 - if you edit information or metadata in the file info panel in Photoshop CS6 copy and paste from one field to another works.
The shortcuts also work under Windows (tested under Vista).
I noticed this minor bug already one in the Photoshop CS6 Beta more than one months ago. I hoped that this was corrected in the official test version, but unfortunately it is not. Although it is a minor bug, it is IMHO a basic function and would be very helpful in my daily work - it is too bad, that such a small thing is making working with the application a little bit annoying.

Thanks! If there is a workaround or simple solution, I would be very glad if you could inform me.
Christian
(signature removed by the Admin)
Am 14.05.2012 um 13:49 schrieb FrankBiederich:
Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata
created by FrankBiederich in XMP SDK - View the full discussion
Thanks for your report; we'll look into it.
Frank
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata
To unsubscribe from this thread, please visit the message page at Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in XMP SDK by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Message was edited by: Arpit Kapoor

Bug Report for files first opened in Bridge and then worked in Photoshop

I encountered a problem with files first opened in Bridge and then worked in Photoshop as follows:
1. I opened a raw file in Bridge and then after corrections sent to Photoshop with no problem, however, after correcting and saving the file I then went back to the option of closing file and going to bridge. It closes file and stays in Photoshop. In order to get back to bridge I must either click on the bridge logo at bottom of screen or request to go to bridge.
2. I tested the same thing in CS-5 and it works like it is suppose to you click on close and go to bridge and it immediately takes you back to bridge.
3. Unless this is a new feature or suppose to work this way then it is a bug.
NancyZ

Hi Curt
Yes, I am talking about opening a file in bridge doing necessary corrections etc and then sending on to Photoshop. Once I do necessary corretions and save in Photoshop my next step would be to select close and open in bridge which is a choice. In previous Photoshops that I have used (CS4 and CS5) when you did this it would close the file and then immediately take you back to bridge. Now under CS6 if you select close and go to bridge it closes the file but remains in Photoshop. If bridge is not a choice when you select close and open in bridge why even have that as a choice? Why not just select close and then click on bridge logo or Control Alt O or select go to bridge?
Nancy

Can't use"Open With" multiple files Bridge to Premiere

I'm running Vista 32 bit CS3 Bridge and Premiere.
According to the Video workshop
http://www.adobe.com/designcenter-archive/video_workshop/
under Premiere > all 19 topics > Managing Media in Adobe Premiere Pro > at 02:46 it shows group selecting a bunch of quicktime files using Edit > Select all, then File > Open With ...the drop down shows Premiere.
Mine only show Premiere if a single file is selected. If I multiple select, it only shows Quicktime Player 7.6.
I've checked the file type association in preferences of Bridge to open these files in Premiere but it still only sees Premiere if a single file is selected.
I've upgraded Bridge to 2.1.1.9 and set to run as Administrator but to no avail.
Any ideas?

The files are .mov quicktime. Rightclicking gives the same error.
I've got the latest update (2.1.1.9)
Not yet tried to reset Preferences but will do that tomorrow. (will let you know)
However.....
I have now changed the file association in Vista, re-started Premiere and Bridge and then after having started just Premiere chose File > Browse and the selected all the .mov files and selected Open With. Hurrah! Premiere is now listed!
However, If I continue the focus changes to Premiere but a warning appears "This file path does not exist on disk at this location".
Nothing is imported. Unlike the video workshop mentioned above.
If however, I chose Open and not Open with then the files are imported.
Seems to be a bug with Open with with more than one file chosen. If a single file is chosen and Open With is applied then the focus changes to Premiere but no file is imported.
I have seen the exact same problem in another discusion "Re: Bridge CS3: Not importing clips into Premiere CS3" (see the More Like This panel on the rightside of this window)

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

Bridge bug with .ste files?

Similar Messages

Maybe you are looking for