Bridge CC 64bit is not working

I have Bridge CC 64 bit installed and it suddenly stopped working. I have windows 7 and I can see information in the windows event log that the application is crashed. I have tried to run it using "run as administrator" but no hope.
does anyone have any idea ?

REset preferences. Hold down ctrl key and start Bridge. You will get a reset window.

Similar Messages

Taking Z1 back to shops!! going back to Apple: Sony Bridge for Mac does not work

Been an Iphone owner. really, really wanted to try a good android phone, and the z1 looked the best. However
I have had the most frustrating experience- this junky bridge software looks slick but it simply does not work on a mac .
I have spent nearly a week mucking around on forums, reading technical 'get arounds' this is a £600 phone and its not good enough. It might be Apples fault for being so locked down, but sony should not claim it works when it has so many issues.
1) it spent 3 days trying to load my media. It eventually got stuck on 10 min remaining. I pulled the cable.
no contacts had even been added, however 1/2 the photos have, but they are a little jumbled up from when they were on my iphone.
2) i try to download the lastest sony for Mac update 3 times- it cant even do this and gets stuck
3) i then try to update the z1 with the latest software, again this also it gets stuck and hangs. OMG how can i update my software, do i have to buy a PC to go with the phone.
im annoyed now and cant play with my new phone
4) connect phone again and just ask it to do my notes, messages and contacts. This seems to work , but all the messages to my Girfriend are completley missing?? why?
5) i try to load a few folders, the pictures on the bridge pop up window seem to freeze , ai cant even drag these across, the same happens with my music
6) i have a lot of photos on my mac form my iphone 3000. If i choose to load them it only allows me to load all of them and not browse.
can i avoid bridge and view my z1 as a drive? also why wont any of the software update?
the next thing is it seems to have infected teh mac, the new version f itunes will not install correctly!! this is very unusual.
some one please helpme before i rant in my blog!

Hi Inventsc,
I apologize for the late answer. I'm sorry you haven't had a pleasant experience using Bridge. We are aware of the problems you mention and are working on it. As mentioned, you can connect your phone in MSC (mass storage mode). To do this, disconnect the phone, find USB connectivity settings and set it to MSC mode before plugging it in again.
Again, I am sorry it's not working properly for you.
Best Regards,
David

PS/Bridge CS5 Batch Processor Not Working / Missing Scripts

I'm having a bit of a problem within Photoshop/Bridge CS5 and haven't found anything that works to resolve it.
In Bridge, I want to launch the Photoshop Batch Processor via Tools>Photoshop>Batch.
When I select this, Photoshop launches, but the dialog to process the images never shows. On occasion, if I return to Bridge and attempt the same operation again, I'll get a notification that there's already something in progress and asks if I want to queue this operation. The other times (majority) I can return to Bridge and attempt the operation again but get no dialogues in Photoshop. I can try the other options in this menu as well (eg Image Processor, etc) and get the same results.
Here's what I've done so far:
1. Checked Bridge Edit>Preferences>Startup Scripts and ensured those were all checked. I even disabled all, closed Bridge and Photoshop, then re-enabled.
2. Cleared all Preferences from Bridge and Photoshop (using Ctrl+Shift+Alt at launch).
3. Reinstalled Photoshop (multiple times)
4. Uninstalled Photoshop, ran the Adobe CS Cleaner application, then reinstalled Photoshop.
It should be noted that in Bridge>Edit>Preferences and Startup Scripts, if I click the button to 'Reveal my scripts' the folder it takes me to is blank. Not sure if this folder is solely used for personal/user created scripts or for others as well, but it's completely empty.
I have also gone to Help>Updates and updated both applications with any necessary updates from Adobe.
If I go into Photoshop and select File>Automate>Batch or even File>Scripts>Image Processor, both dialogues open fine.
Running Windows 8.1 Pro.
Anyone else seen this and actually resolve the issue? Does anyone know where the scripts are supposed to be located and/or if I can get them from somewhere else? Any help is much appreciated

Make sure Photoshop is not started and then try to use Bridge menu Tools>Photoshop>Batch does Photoshop start up?
Bridge CS5 menu Tools>Photoshop>Batch works on my Windows 7 Pro system
Photoshop Automate>Batch is not a script and Photoshop does not any external java program it had its own version of java plugin.
c:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Extensions\ScriptingSupport.8li
c:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Extensions\ScriptingSupport.8li
However there are two startup scripts for the bridge involved Bridge and Photoshop You must have them for you have a Bridge menu Tools>Photoshop>items
two scripts on my system are:
c:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS5\Adobe Bridge\bridge-4.jsx
c:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS5\Adobe Photoshop\photoshop.jsx
The photoshop.jsx seems to be the one the the inserts the menu Tools>Photoshop>Batch into Bridge and also invokes Photosgop Automate>batch photoshop.jsx also inserts the other Bridge menu Tools>Photoshop>Menu Itens that you state work.
Here is what I see in my photoshop.jsx for batch. I do not know or understand Bridge scripting and do not know javsscript but what I see there seems to be some checking done about Photoshop being available and if it is not the script just returns which is what you seem to be experiencing the test looks like this
if (!photoshop.correctPSIsAvailable (availabilityCheckOptions))
return;
The whole batch support section follows:
//=================================================================
// Batch
// Sets up Photoshop's Batch automation command to be
// accessed from the Bridge.
//=================================================================
// This routine takes an array of files. If called by Photoshop,
// it will invoke Batch with the files. If called by
// any other app, it will send a BridgeTalk message to Photoshop
// to invoke this routine with the same arguments.
photoshop.batch = function (/* Array */ files, availabilityCheckOptions)
try
if (availabilityCheckOptions == null)
availabilityCheckOptions = new AvailabilityCheckOptions ();
// Make sure this can be run.
if (!photoshop.correctPSIsAvailable (availabilityCheckOptions))
return;
if (BridgeTalk.appName != "photoshop")
// Bring Photoshop to the foreground.
BridgeTalk.bringToFront (photoshop.versionInfo.btTargetName);
// Create a new BridgeTalk message for Photoshop to invoke
// Batch with the selected files
var btMessage = new BridgeTalk;
btMessage.target = photoshop.versionInfo.btTargetName;
btMessage.body = "photoshop.batch (" + files.toSource () + ");";
btMessage.send ();
else
app.bringToFront();
photoshop.runActionCommand ('batch', files,
localize ("$$$/PSBI/Automate/BatchSettingsFile=Batch via Bridge Settings"));
catch (error)
if (error.number != 8007) // Don't report user cancelled errors.
alert (error);
// This routine is called when the Bridge's Batch menu item is
// chosen.
photoshop.batchFromBridge = function ()
try
var availabilityCheckOptions = new AvailabilityCheckOptions ();
// Make sure this can be run.
if (!photoshop.correctPSIsAvailable (availabilityCheckOptions))
return;
var files = photoshop.getBridgeFileListForAutomateCommand (true, false);
if (files.length != 0)
photoshop.batch (files, availabilityCheckOptions);
catch (error)
if (error.number != 8007) // Don't report user cancelled errors.
alert (error);
// The code below inserts the Batch menu item into the Bridge menus.
if ((BridgeTalk.appName == "bridge") && (BridgeTalk.appVersion.indexOf (photoshop.versionInfo.bridgeTargetVersion) == 0))
// Use temp function to keep vars out of global namespace.
photoshop.tempFunction = function ()
// Set up the info necessary for inserting this item into the Bridge's menus later.
var menuItemInfo = new Object;
menuItemInfo.text = localize ("$$$/PSBI/Menu/Automate/Batch=Batch...");
menuItemInfo.name = 'Batch';
menuItemInfo.onSelect = photoshop.batchFromBridge;
photoshop.menuItemInfoArray.push (menuItemInfo);
photoshop.tempFunction ();
delete photoshop.tempFunction;

Bridge CC Output Module not working for me

I have installed the Output Module in Bridge CC (Which I can't believ was not included and that it is not an auto update as I thought was one of the big positives of this whole CC concept) but while it opens and looks ok, when I try to create and save a pdf contact scheet, I get a message saying "The file or folder does not exist." and nothing is created or saved. What gives? This is a major feature of Bridge to me as I use it a lot.
By the way, the web gallery does not work at all, either.

Have you read through the help doc http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html

Bridge for Mac did not work for itune transfer

Tried to use Bridge for Mac to transfer itune music to newly purchased xperia z2, but did not work! Anyone done it successfully?

Hi Ebmsa,
Could you please answer the following questions so that I can understand your problem better?
1. What format were the songs that you were trying to transfer in? .mp3 etc?
2. Are you connecting your phone in MTP or MSC mode?
3. How much available memory does your phone have?
4. What's your phone and build version?
5. What's your android version, Bridge for Mac version and Mac OSX version?
Please let me know if you have any questions regarding my questions above.
Best Regards,
David

Bridge CS3 "Edit Find" not working after optimizing cache.

Power PC G5
Mac OSX v.10.4.11
3GB RAM
Photoshop CS3
After optimizing the cache, my Edit>Find feature does not work. I looked into the Bridge Preferences and could not find anything under Thumbnails or Cache that can turn it back on. Please advise.

Make sure you have Bridge 2.1.1.9.
Purge the cache for each folder through the Tools menu in Bridge.

Lenovo OneKey Recovery for Windows 7 64bit does not work

Does anyone have a patch or new release link for Lenovo OneKey Recovery? I recently bought a G450 and Win 7 Ultimate-64bit separately, there is no link available in the support and download page under this model yet. I tried installing the Vista 64 bit version and still does not work as well. I did a clean install downloaded the drivers from the Lenovo support page.
Solved!
Go to Solution.

You haven't provided a link to the page you are trying to download from. On top and at the right of most download pages there should be a red loud speaker next to the print page button, just click on it in order to report a faulty download or possible other problems with the page.
Is the following page the page you were trying to download from? If so you can submit direct feedback if the download doesn't work for you.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS009179
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Apache bridge & Basic Auth does not work

The WebLogic newsgroups are not the appropriate place to file product defect
reports.
I suggest that you file a bug report with our support organization. Be sure
to include a complete test case. They will also need information from
you -- please review our external support procedures:
http://www.beasys.com/support/index.html
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Jaroslav Mechacek <[email protected]> wrote in message
news:[email protected]..
>
I tried mod_wl with apache 1.3.12 ( mod_ssl / openssl ) ,
but the basic auth does not work.
When apache starts it complains that mod_lw uses plain apache api
Tue May 16 17:29:54 2000] [warn] Loaded DSO libexec/mod_wl.so uses plain
Apache 1.3 API, this module might crash under EAPI! (please recompile it
with -DEAPI)
When I request protected page, apache returns both
HTTP/1.1 200 OK , HTTP/1.1 401 Unauthorized
what apache / ssl configurations are known to work ?
Escape character is '^]'.
GET /file/index.html HTTP1.0
HTTP/1.1 200 OK
Date: Tue, 16 May 2000 14:47:01 GMT
Server: Apache/1.3.12 (Unix) mod_ssl/2.6.4 OpenSSL/0.9.5a
HTTP/1.1 401 Unauthorized xxx:
www-authenticate: Basic realm="WebLogic Server"
content-length: 23
content-type: text/html
connection: Close
No credentials supplied

Ideapad U310 Windows 7 64bit, YouCam not working

I have a 1.5yr old Ideapad U310, Win 7 64 bit with inbuilt webcam. The camera is not working and cant be swiched on.
Neither thru YouCam software or through Skype. Was weoring perfectly a month ago.
The Product shown in the the Device manager under Imaging Device "Lexmark X422" WITH AN EXclamation mark.
There is a youCam software which doesnt work as says switch on camera. Fn F9 done the camera is still not ON but icon says on. Reinstalled the Youcam software twice, but issue remains "Camera to be switched on".
Please advise.

hi vtrakroo,
The Lexmark X422 that you're seing is likely the scanner from your Lexmark printer (the built-in camera should usually be listed as Lenovo Easy Camera or similar)
- Sample image
Things that you can try:
1. Boot into the BIOS by pressing F2 (or Fn+F2). In the BIOS, press F9 (or Fn+F9) to load setup defaults then press F10 (or Fn+F10) to save and exit.
- this procedure will refresh all hardware components in the system
2. Inside Windows, check if you have an Unknown Device in the Other Devices section. If you have this, follow this guide on how to identify the device (or post the Hardware ID here)
- Sample image
3. Reinstall the camera driver
- Camera Driver (Bison, Chicony, Awazu) for Microsoft Windows 7 (32-bit, 64-bit)
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Bridge CS5 preview / slideshow not working on 27" Apple Cinema Display

I'm using my 2009 (black key) MacBookPro and Mac OS X 10.6.7 running Snow Leopard.
2.4 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
Adobe Bridge CS5 works beautifully on my MBP, my photography workflow depends on Bridge.
However, when I attach my 27" Apple Cinema Display and try to preview images by hitting the space bar I get a gray screen. Likewise, the slideshow renders only gray.
It's not the "black out other monitor". I've cleared the cache to re-render all the previews.
I've scoured these forums as well as the Apple ones, and the helpful folks currently at Photoshop World in Orlando advised me that, collectively, the kind people here know everything. I know I can't be the only photographer who uses this configuration. I'd like to use the display for client previews/ordering.
I would so appreciate any tips you may have for me; thank you in advance for your time.
Warmly,
Darcy
http://hisandhersphoto.net

Yes, thank you. I found that post - among others when researching before I asked. I tried all the suggestions in that one and in the others.
My issue isn't low quality rendering in the preview and slideshow - my issue is NO rendering at all in slideshow and preview. It's just blank. Gray.
I deleted the cache in my library and through the Bridge program itself to rebuild the previews. I tried the various options of "software rendering" on and off, and different configurations in the preferences and none seem to make the preview or slideshow work. I have all the updates from Adobe and from Mac.
I tried importing the photos I need to show my clients (who are coming to my studio this evening!) into Lightroom 3, and the LR slideshow works. But using LR and having to import photos into it is an extra step not in my workflow.
Ideally, I can make Bridge work instead of making yet another resource-consuming copy of these photos on this computer via the Lr library.
So - current state is unsolved.
Lightroom 3 slideshow and preview works, but isn't ideal since it involves importing the images into Lr. Since that works - would that mean my video card is acceptable?
Bridge can show thumbnails on the 27" display but no preview or slideshow.
Bridge preview and slideshow works perfectly on my 15" MacBook Pro.
I'm so disappointed since I bought the 27" Apple Cinema Display this week and was told it would work with my computer "out of the box" - I was sure to ask several times, "so there's nothing else I need to buy or do to make this work with my programs? Just plugin and go?" and several times I was assured, "Yes... plugin and go."
I sure would appreciate anyone who's made Adobe Bridge work with a 27" display. Thank you!
Darcy

CC Bridge -- Output modules installation not working

(Had this in an "answered" response. Trying as new question.)
Hi,
I am having a problem with having the Output Module work as well.
According to the instructions I have done everything correctly. Install Adobe Output Module
I:
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder.
When I place the AdobeOutputModule.workspace into the Workspace folder Bridge doesn't come up at all. If the Module is in the same folder as the BridgeCC folder then there is no change to whether Bridge works or not.
Additionally, I am not seeing "!!-$$$AdobeOutputModule.workspace" in the \Users\[user name]\AppData\Roaming\Adobe\Bridge CC\Workspaces folder. All I see are
!!-$$$Essentials.workspace
!!-$$$LightTable.workspace
!!-$$$Navigator.workspace and
!!LastMenu.workspace
Help please. Any more ideas.
Thank you,
mario

Marioo, If you do not see the !!-$$$AdobeOutputModule.workspace file, that means output module is not installed properly on your machine.
I would suggest you :
To check if you have the admin rights on the machine, If not, login with the admin account and check.
Reset Bridge workspace : In Bridge, choose Window > Workspace > Reset Workspace
Download the appropriate 32 bit or 64 bit AOM package and make sure to de-compress or extract it. Have seen issues like these, if users don't extract the files.
Now Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
And now copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder.
Launch Bridge and check if you get "The Bridge extension "AdobeOutputModule" has been added to Bridge" message.
Also, make sure user has full read/write permissions on C:\Program Files\Common Files\Adobe folder.
Let me know how it goes.
~ Arpit

Bridge for mac download not working

Hi, I'm trying to load Bridge for mac, it downloads and everything goes fine until it opens the program and then it quits giving the error message 'Sony Bridge For Mac has quit unexpectantly'. I have a new xperia sp and I want to get my music from my itunes onto it. Any help is appreciated.

Hi Theschmallfella,
I am sorry, but I am not sure what might be causing this problem. Have you tried rebooting your computer etc.?
I will forward this to the development crew and see if they have any solutions.
If you can provide me with error logs, that would be very helpful as well and make it easier for the developers to analyze your problem.
Here's how to get error logs from Bridge:
1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
3. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Export logs"
4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
5. PM that file to me or post the contents here
Best Regards,
David

Bridge scripts and commands not working in PS

specifically the batch command from bridge ( and also dr browns services)
Hit the batch command in bridge - it switches to PS but nothing happens.
ps cs5 64 in win7 64. Its a new install.

pc,
For proper reinstallation in such a case, see 6) below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

GE40 - Win 7 64bit - Wireless not working

I can't get the wireless on my GE40 20C to work running windows 7 x64.
I have installed and then uninstalled/reinstalled my drivers in different orders several times but it just won't connect.
It is showing the adapter as installed and "working".. but it just won't show any networks.
I fear there is a fault but I really want to avoid having to return it so I am on here for confirmation there is a hardware fault.
When I connect ethernet directly, the lan adapter works fine.
Can anyone suggest anything I haven't tried yet, please?

Quote from: Svet on 26-November-13, 23:09:17
oki, reading your other topic where you have troubles with ec firmware,
this could be related to your wifi issue, if you done some crossflash to the wrong ec
I isn't... I flashed the firmware cause I couldn't fix the wifi problem with drivers. Thought it was worth a shot. Doh.
The blue wireless light is on but there is no wifi. Everything on my pc says it is working... but I am not picking up any wireless devices?!
Any ideas?

Bridge Browser on Playbook Not Working

I just got my Playbook, I love it! I connected the Playbook (OS 1.0.3.1.868) to my Curve 9300 (using OS 5.0.0.977 on BES) through bridging. All Bridge functions work well EXCEPT the Bridge Browser.
When I type in a web page address in the Bridge Browser on the Playbook, it loads 1/4 of the way and then a popup window asks me to type a "File name" and "Save To". When I do (or cancel) nothing happens and I get a blank white screen with "No Title".
My Browser on the Curve 9300 is working fine.
Please help!

I am on BES and it works for me, we dont have any fancy settings either.
I am wondering if it has to do with the way BES is routing data access on your device.
What is you default browser set to and can you surf on all default browsers?
KB16463 - How to change the default browser on a BlackBerry smartphone
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Bridge CC 64bit is not working

Similar Messages

Maybe you are looking for