Bridge CC / How to use all cores to generate preview images?

Hi!
Is there anyway to tell Brdige, that it should use all my cores to generate the preview images?
Actually it uses only 25% of my CPU performance. I've a Intel Core i7-2600 CPU @ 3,4 GHZ, with four cores and enabled hyperthreading, also eight virtual CPUs.
At least it could be FOUR times faster, if it would use all available cores, but so I get one preview per second (12 MP RAWs). So I've to wait in case of 1.000 RAWs round about 15 minutes. If would use all CPUs, which are available, it could increase speed up to 4 minutes. More then 10 minutes saved.
As there any chance, or does Adobe have no interest, like it has no interest to speed up LightRoom?
If there is any chance, I would be very pleased.
Thanks

It's really frustrating:
While Adobe Camera RAW is able to process different images in parallel and speeding up the process.
Other teams of Adobe are still telling me, that it's impossible to process several images in parallel and speeding up the Bridge thumbnail and preview generating process:
http://feedback.photoshop.com/photoshop_family/topics/bridge_cc_how_to_use_all_cores_to_ge nerate_preview_images?rfm=1
I do not get it. :-(

Similar Messages

  • Bridge CC / How to use all cores to generate JPEG images?

    Hi!
    Is there anyway to tell Bridge, that it should use all my cores to generate the JPEG images out of RAWs?
    Actually it uses less then 25% of my CPU performance. I've a Intel Core i7-2600 CPU @ 3,4 GHZ, with four cores and enabled hyperthreading, also eight virtual CPUs.
    At least it could be FOUR times faster, if it would use all available cores, but so I get one preview per second (12 MP RAWs). So I've to wait in case of 100 RAWs round 3:30 minutes. If would use all CPUs, which are available, it could increase speed less then 1 minutes.
    In my case, I've to create often up too 500 JPEGs in one go. So instead of 17-18 minutes it would take less then 5 minues. 12 minutes less!
    I just wonder, why I bought a good PC, if Adobe is not using the power of the CPUs and tries to work parellel instead of seriel.
    As there any chance, or does Adobe have no interest, like it has no interest to speed up LightRoom?
    If there is any chance, I would be very pleased.
    Thanks

    Sorry, I could not know, that issue is caused by the same flaw in the software:
    http://feedback.photoshop.com/photoshop_family/topics/bridge_cc_how_to_use_all_cores_to_ge nerate_preview_images
    http://forums.adobe.com/thread/1316239

  • Premiere Pro is not using all core power for rendering of timeline

    I have got PremierePro CS5.5 and i7 920 and nvidia GTX 295. When i edit my footage (cineform) everything is fine becouse i am using CUDA boost but when i am trying to render timeline i saw on my CPU & GPU Monitor that rendering is using maybe about 10% of power of all cores (8 cores). How to do to use all cores power when i am rendering my timeline?

    When i am using cuda i work much faster with fullhd timeline than i am working with cpu. I thought that cuda is accelerating only editing of timeline becouse line is always yellow and when i am using rendering line is green and system is using cpu power. So i thought that cuda is acceleration only for editing without rendering acceleration. When i would use cuda for rendering acceleration system should work faster than with cpu rendering and it`s not true.
    What is fastest way to turning off CUDA (to turn it on for a while).
    Thanks a lot...

  • I need to learn how to use all about java & mysql...help me!

    I have a situation here, I need to learn how to use java with mysql
    . Can I connect to a MYSQL DB with servlets?
    how can I build an e-mail server with java (no matter how difficult)
    please, I need help, and I really apreciate your help.
    thank you very much!!

    I have a situation here, I need to learn how to use
    java with mysql
    . Can I connect to a MYSQL DB with servlets?Yes... documentation to help you connect to any database can be found at http://java.sun.com/products/jdbc. To connect to MySQL, you'll need drivers (sourceforge.net), and the specific connection URL for those drivers will be included in the documentation.
    how can I build an e-mail server with java (no matter
    how difficult)If you're fairly new to JSP/Servlets, you may be in over your head here, since an email server is no easy application to code. Here's a link to the source code for the JAMES project... Apache's Java email server... maybe you can find some useful information there...
    http://www.ibiblio.org/pub/packages/infosystems/WWW/servers/apache/jakarta/james/source/

  • Where do I find information on how to use all the features of iPhoto on the iMac?

    I was told that iphoto  would be easy to use on IMac but I am not finding that true.  Is there a guide to how to use Iphoto?  Transferring photos from my external drive to iphoto is not working as I would expect.  It imports them to a new "last import" and not to the folder I want.  I am frustrated and can't find information that is helpful.  help window only gives me connections I'm not looking for.  I'm not seeming to ask the right questions.  Can't even find the category I'm looking for.  Is there a guide somewhere that I don't know about?

    There's also this popular book: Amazon.com: iPhoto: The Missing Manual: 2014 release, covers iPhoto 9.5 for Mac and 2.0 for iOS (Missing Manuals) (9781491947319): David Pogue, Lesa Snider: Books
    OT

  • How to use Flex Builders Auto Generated CFCs

    OK. Not only have I already gone to a 4 day flex training,
    have an advanced coldfusion certification and work with 3 coworkers
    who have done the same...none of us can figure out how in the heck
    the flex builder's autogenerated cfc's are to be used. No big deal
    on the fact that this might be something we simply are encountering
    for the first time, but the complete and utter absence of a single
    piece of example code or documentation stating how to use this code
    correctly is very very very very irritating.
    Can anybody, share with me anything about how these CFCs are
    to be used correctly. For example. We are using the wizard to
    generate an "Active Record CFC" set of cfc's for an example table
    contain four fields. We have a data grid that is now populated by
    the "getAllAsQuery" function....we would like to implement the
    feature of making this dataGrid updateable. We know how to pass
    data back and forth and yes we could write our own CFC to do
    this...but having it autogenerated is a really neat option...but
    the question remains....how does one use them!!!
    Any help would be much appreciated. Thanks in advance!

    Hi there, what's your name by the way?
    What is a VO or DTO, and why would you use it?
    This was copy from the Java world, so it's a very OOP principle, basically in the OOP world everything is a class that has methods and properties, and you represent everything with classes, a VO is just that a class that represents an entity in your app. You use it for a few reasons in my opinion:
    It allows you to pass strongly typed data between different layers in your app.
    It's more verbose, it's a good OOP practice, and also makes debugging and reading you code easier.
    It allows easy data type conversion between CF and Flex.
    You obviously know how to use the wizards, after you select your table and open the wizard you'll see three different CFC types, if you're using LCDS then select that type if you don't I'll recommend you to go with BEAN/DAO. In Flex Builder you can create a folder link to a system folder, so if you create a folder named MyCFCs and you set this virtual folder to be hold inside c:\ColdFusion8\wwwroot every file that you put in this folder will be place in c:\ColdFusion8\wwwroot so you don't have to manually copy those files.
    In this wizard you'll see CFC folder in there you can select your virtual folder, you'll see below the CFC package name this is extremely important to be set right, what is the CFC package name? Basically it's the same folder structure where your CFCs will be located for instance let's say you're gonna place the files in this folder structure c:\ColdFusion8\wwwroot\com\myPersonalDomain\ so your CFC package name will be com.myPersonalDomain.
    You'll probably also would like to enable the option: Create an ActionScript value object in addition to CFCs, the folder where you place this file have to mimic the CFCs folder structure so for an instance you'll have to save inside your src folder, inside a folder com, an finally inside a folder myPersonalDomain . src/com/myPersonalDomain, and the AS Package name should be the same as the CFC.
    Once you're done and click finish, you'll see for files created, one of the the AS VO , and three CFCs.
    yourDataTable.CFC
    This is a CFC that creates the VO or DTO in CFC, it has the same properties definition that the AS version has, also the setters and getter for every property.
    yourDataTableDAO.CFC
    This CFC contains all the code that handles the database access it a could be an insert, update delete or just a read query.
    yourDataTableGateway.CFC
    This is a bridge between your Flex app and your CFCs, it contains a set of methods commonly use when you access a DB, this CFC invocates the methods in the yourDataTableDAO.cfc and returns an object or an array of objects of yourDataTable.CFC type to Flex.
    In Flex what do you have to do in order to use VOs?
    Add a reference to yourDataTable.as class
    Create a remote object.
    Create the event handler(s)
    Make a call to the remote object.
    <mx:Script>
         <![CDATA[
                   import com.myPersonalDomain;
                   import mx.controls.Alert;
                 import mx.rpc.events.ResultEvent;
                  private var myDummyVar:myDataTable;
              private function myEventHandler(e:ResultEvent):void{
                   //do Something
                   trace(event.result.toString());
         ]]>
    </mx:Script>
    <mx:RemoteObject id="myRO" destination="ColdFusion"
    source="com.myPersonalDomain.myDataTableGateway">
         <mx:method name="getAll" result="myResultHandler(event)"
    fault="Alert.show(event.fault.toString())" >
    </mx:RemoteObject>
    <mx:Button label="Call CF" click="myRO.getAll()" />
    Well I hope this would help you, I'm kinda tired this has been by far the largest post I've written.

  • How to convert all white - alpha for vector image?

    I'm attempting to make a new font. Currently I've been saving all the png -> vector images that I work with as .AI files, so that I can import them into my font program later, and they open fine in illustrator. The problem is, I usually save my vector images with a white background instead of alpha. Now, I need to replace white with alpha, but I can't find a magic wand in illustrator . Any help?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    I only knew the most fundamental differences between raster and vector: that raster images are saved in dots while vector images are saved in, at the simpliest, lines.
    Not "dots";  pixels. Pixels are simply color values. That's all. Raster programs arrange color values in a rectangular grid of same-size rectangles (usually squares).
    Not "lines"; paths. Paths are discrete individual objects. Paths are stacked, independently moved, freely arranged, scaled, filled, stroked, and otherwise manipulated as individual objects.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    But I'd have thought there was a way to quickly delete the white lines
    There is no "vector image" with a background. Where there are no objects, there is no "background." If a path is there, regardless of whether it has a white fill, a white stroke, or fill(s) and/or stroke(s) of any other color or no color at all, the path is there and can be deleted. (Again, there is no substitute for learning to use the program from the documentation.)
    Technically, paths are mathematically-defined curves. So even a "straight line" is a path, and is technically a curve. The specific kind of mathematically-defined curve used in programs like Illustrator is called a Bezier curve.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    I have no idea how hard it is to create a vector image from scratch.
    It's not rocket science. Anyone can learn it. But again, you have to learn it. There is no substitute for learning to use the program from the documentation.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    I myself am mostly a newbie in both hemispheres of the graphic design world.
    It shows. And there's certainly nothing wrong with that. We all started as beginners. I'm not trying to belittle you: I'm offering you sound advice that will serve as a very valuable shortcut to becoming more than a beginner (if you will accept it) without an unnecessary amount of fumbling around with bad practices.
    Just don't ever claim to a client or in a job interview to know anything at all about any mainstream general-purpose vector drawing program (of which Illustrator is just one) until you are proficient at drawing Bezier curves. That's prerequisite. It's lesson one in chapter one. Might as well start there. Start at the correct beginning and you'll know all the answers to the questions you have asked in this thread. Your understanding of "background" and things like why a region with no objects is not the same thing as an alpha channel in a raster image will come very early if you just start at the beginning. You've got to learn the lay of the land. Start at the beginning.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    In any case, I use a program called vectormagic that does the work for me pretty well, so you might want to check it out.
    Trust me; I'm familiar with it. It's just another autotrace program. I know what it does. I know how "well" it does it. Everything I said in the previous post stands.
    Vector drawing programs are not the kind of program you learn by just launching it and poking around. Not if you want to avoid endless confusion and frustration. Asking random questions in an online user forum (in which wrong "answers" are just as common as right answers) everytime you encounter a point of confusion is just as inefficient. Read the documentation.
    JET

  • Where to locate and how to use the filter thershould to binarized image

    Good morning friends. I am using
    Labview with VDM and let me know where to locate and how to use the
    filter thershould. Also that parameters used to binarized image captured
    via webcam and display it in black and white.
    Thank you very
    much.

    Is the image that you are getting a RGB one? Use color plane extraction and then use a binary threshold to convert it into a binary image. You can also directly use a color threshold and convert a rgb (color) image to a binary image.

  • Please Help!!! How to use the Hand cursor on an Image !!!!

    Hi,
    I am sorry for cross posting but nobody seem to know this, i need this as soon as possible.
    I have a main Jframe which contains a Jpanel which contains a jscrollpane. THe image is in scrollpane and i would like to use the Hand cursor to move the image up and down the jscrollpane.
    Can someone tell me or show me how can i use a hand cursor on an image
    I would appreciate if someone can show me a simple example.
    THanks in advance.

    Well. I would call setCursor with a cursor of type Cursor.HAND_CURSOR or something on the Component where you want the hand. Then you could add a MouseMotionListener to the Component. in mouseDragged() you scroll the scrollpane programmatically according to the MouseEvents getX() and getY().

  • Can't use all annotate actions in Preview-it's a PDF of a web screen shot. No highlight, underline, etc; can insert text, boxes, notes.

    I can't use all the annotate actions in Preview. It's web screen shot saved as a PDF. No highlight, underline, or strikethough text but I can insert text, boxes, notes. On other forums this problem was solved by saving as a PDF which I have done. Any other solutions?

    I don't think PDF is the way to do it, but if it was you'd need something like Adobe Acrobat Professional.
    >I'm updating the content and copy for a website and thought the easiest way would be marking up a PDF of the webpages including highlighting text to be removed, etc.
    As far as Text changes, I thing the actual Source would maybe be the way to go, but you could always turn the PDF into a jpg or such, then use a Graphics program to poit out things...

  • How to use icon instead of bitmap for image on button in toolbar?

    Hello,
    I am trying to use an image that has a transparent background on one of the buttons on our custom toolbar in Adobe Acrobat.
    In the past we have been using the following code with Bitmaps to display the image and it has worked perfectly:
    ======================================================================
    AVIcon icon = LoadBitmap(gHINSTANCE, MAKEINTRESOURCE(IDB_OPTIONS_LARGE));
    toolButton = AVToolButtonNew(ASAtomFromString("IMGR:Options"), icon, true, false);
    ====================================================================
    Background info on the other objects:
    V0200_DATA* dataPtr = (V0200_DATA*) windowsData;
    gHINSTANCE = dataPtr->hInstance;
    Resource File:
    IDB__OPTIONS_LARGE BITMAP "Resources\\ImageOptions_Large.bmp"
    IDI_ICON1 ICON "Resources\\Image_Icon.ico"
    Unfortunately, these bitmaps are not transparent and end up showing the white background instead of the transparent one.
    I have tried using Icons and PNGs as my image but I have been unable to get anything to show up. Here is the code I am using to get the AVIcon:
    ===================================================================
    AVIcon icon = LoadImage(gHINSTANCE, MAKEINTRESOURCE(IDI_ICON1), IMAGE_ICON, 0, 0, LR_DEFAULTSIZE);
    ===================================================================
    However, no image appears on the toolbar. I am able to use LoadImage with the bitmap, but I am unable to make it transparent, even when using the LR_LOADTRANSPARENT flag.
    If anyone can point me in the right direction I would greatly appreciate it!
    Thanks,
    Ryan

    I got it worked with PNG file. I got transparent backgrounds in toolbar and menus.
    below is my code,
    HRSRC resource = FindResource(gHINSTANCE, MAKEINTRESOURCE(IDB_SAVE_21_PNG), L"PNG");
    if( resource == NULL )
         //Unable to load resource
    DWORD resourceSize = SizeofResource(gHINSTANCE, resource);
    HGLOBAL glob = LoadResource(gHINSTANCE, resource);
    LPVOID resouceArray = LockResource(glob);
    ASUns8  *data = (ASUns8*)ASmalloc(resourceSize + 1);
    memcpy(data, resouceArray, resourceSize);
    AVIconDataRec  iconData;
    iconData.dataStm  =  ASMemStmRdOpen(( char  *)data, resourceSize);
    iconData.eColorFormat  =  kAVIconColor;
    void * iconBundle = AVAppCreateIconBundle6(kAVIconPNG, &iconData, 1); 
    AVToolButtonNew (ASAtomFromString("PFXDOC:Pfx_DocumentToolSave"),
                                            iconBundle, true, false);
    Thanks & Regards
    Prakash

  • How to use application builder to generate installation disk without compiling the the support files?

    Hello,
    What I am trying to do is to use LV application builder generating an installation disk without compiling the support files. I mean:
    the support fils like the help files are located on a different directory , for example, installation disk is D drive, help file directory is: D:\Help\...,  not compiled in the installation Data set.
    So,  when the installation disk is running, it only copy this directory file into the destiny directory. Of course, we can write a different bat file to do this. However, beside this method, is there any way, like using LV application builder to do this without writing a batch file.  Any suggestion will be appreciated.

    For LabVIEW 7.1, this can be done in a few short steps. First, add your help file as a support file in the Application Builder. Then go to the Installer tab, choose to create an installer and click on the Files button at the bottom. From this dialog (shown below), you can specify the destination for each component in your install package. If you have added your help file as a support file, it will show up in the Files in Installation list. Click on your help file to highlight it. You can now choose where to install the file to by specifying an installation destination and a subdirectory. The default subdirectory is called data, but if you want to change that, just type in a new subdirectory name as I have done below:
    Hope this helps!
    Message Edited by Jarrod S. on 01-23-2006 10:17 AM
    Jarrod S.
    National Instruments
    Attachments:
    Support Files.JPG ‏31 KB

  • Why won't FCX use all cores when exporting a file?

    Hi folks,
    Latest version of FCX and Lion.
    I'm trying to export 7 'projects' (or sequences) for archiving then processing for DVD.
    Compressor still busts my kahonies so I'm not using it.  I'm using Bitvice (far better compression as well).
    Anyhoo, when I Share - export media and choose the file, click ok etc..., the file starts.
    But my cores are barely operational. It's quite ridiculous.   A 1 hour 22 minute ProRes file to 720x480 16:9 widescreen is taking near 23 minutes.
    That doesn't seem right. I shouldn't have to beg this software to rip all 24 cores to their max (I have a 12 core 2.66 with 32 GB Ram).
    I've been on so many "how-to's" over the year, that my head is spinning so can anyone tell me what I may be doing wrong.
    It sure seems like a simple thing.
    Cheers,
    Keebler

    Thanks WG.
    Of all things Apple that I've used and owned, I've never been able to get Compressor to go full force.  Well, I should say with ease and consistency. There have been a few moments of sparkling hope  lol
    Latest was a long series and tests with Apple FCP team. They recommended a complete rewipe and only installation of Compressor 4 and FCX without installing FCS3. Sounds like something was messed up with QMaster along the way.  But that's another story.
    You are right about these - already rendered and FCX probably needs to re-render as it outputs. 
    My irk is that my cores just aren't being used - I'm exporting a file right now and my CPU usage shows
    <GULP>   95.57'ish % IDLE! 
    cheers,
    Keebler

  • How to zip all the files generated using file adapter

    Hello Everyone,
    I have a scenario in place where i split a message into multiple messages. I used to generate multiple file using the file name present in the payload of the splitted message using variable substitution.
    This is working fine.
    Now the requirement has changed and i want to zip all these file and create a single zip file.
    I think it could be done using run OS command option in file adapter, but have no clue how to do it.
    Please help me.
    Regards
    Rahul Nawale

    Hi,
    you can use on of the command line ZIP utilities:
    http://www.winzip.com/prodpagecl.htm
    http://www.7-zip.org/
    then when your file adapter puts the file
    you can use commnad line to zip the files
    Regards,
    michal

  • How can use all vcenter feature such as HA and drs without shared storage

    Hi
    i have 2 esxi host dl 380g8
    but i don't have any shared storage or san now i want use vcenter feature like ha and drs now for use this features do i have to run VSAN?
    i readed for for use vsan we have to buy ATLEAST ONE ssd disk is this trure?
    ssd disk is necessary?
    atleast one ssd disk for each host ?
    can use from all of vcenter feature with VSAN ?
    please some help me

    Hi,
    For VSAN you need at LEAST 3 hosts (4 recommended).
    Each host must have 1 SSD for read cache/write buffer.
    Do you have any storage at all? How about running a NAS such as "OpenFiler" or "FreeNAS". That way you can present shared storage via that way. (I'd use this in Lab only). These NAS O/S's also work as virtual machines so you can turn any disk into shared storage.

Maybe you are looking for