Bridge CC ist not installed

I'm using Photoshop CC on Windows 7 (64-bit).
I had to restore Windows (using 'system restore'). Doing so Bridge CC went lost. I want to re-install it. The Creative Cloud app tells me Bridge CC ist installed successfully (I fully disagree). The installation via the download center fails. Downloading leads to the Creative Cloud app, but nothing happens.
Bridge CS6 is still on my PC, as part of CS6 Design & Web Premium - I see no way to remove it.

Stefans_Bridge please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to resolve your current difficulties.

Similar Messages

Bridge CS3 will not install

My Bridge CS3 will not install on my new Intel duo core iMac. It worked on my earlier iMac, but when PhotoshopCS3 was moved and installed on the new one, Bridge was nowhere to be seen. I have repaired permisisons, reinstalled PS CS3, and looked for Internet advice.
I would really like to continue to have the Bridge in the CS3.
Am I going to have to rely on my new Lightroom Developer for its Camera RAW functions and for renaming my files? I liked the Bridge RAW converter very much. The old Bridge is still on my machine, but its renaming functions don't suit me at all, and for some reason it is refusing to open my non-RAW files.

I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be. I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be. This is just my own personal opinion and practice based on my own observations.
Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise. Note that this suggestion begins with "I still advocate…", not "Apple recommends…".
Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
==== Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night. If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388 Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large. Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE: There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject. Other, more reliable reports indicate that this seems to have been fixed in the current version of Leopard.
In any event, Repairing Permissions and/or running the Cron Scripts cannot hurt.
If you have DiskWarrior, run it regularly too. It can't hurt either, and it often improves stability and performance.

"Mini Bridge could not be launched because the Mini Bridge extension is not installed."

Why?
I have uninstalled and reinstalled. I have searched for an answer, no luck.
Any ideas?
Thank you!
Amy

I"m also getting this message while trying to launch mini bridge on a Mac. I went to the Library folder you noted and the mini bridge extension is not there. I have 4 extensions present: BuzzwordAccessBundle, CSREviewBundle, Knowledge, and STORY. However the PS menu item Window>Extensions, the Extensions is grayed out. Also when I click on the "CS Live" button in the upper right of PS window, nothing happens.
I havn't used mini bridge much because I use Lightroom for organization, but I know I've used it in the past and it worked, so I can't understand how it would just disappear, and why these other things would stop working.
How can I reinstall mini bridge and get the CS Live button and extensions working again?
I'm back. I installed a couple of extensions to see what would happen and the Extensions button was still grayed out. Too shorten the story; it occurred to me to check what mode PS was running in. I had switched it to 32 bit mode so some not yet updated plugins would work. I switched it to 64 bit mode and bingo, everything works now, including mini bridge, though it is still not present in the Library folder you mention.

Mini Bridge NOT installed in PS CS6

Holy Cr@p - THis is the third time I am entering this question trying to get help!!!
Running PS CS6 with Win Vista. Cannot access Mini Bridge because the error message says "Mini Bridge Extension is not installed"
QUESTIONS:
1: How do I install Mini Bridge?
2: Seeing I had no install error message - what else may not be intalled and how can I check?
Help

I would recommend by starting with the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/. It will automatically review your installation logs and attempt to locate solutions.
Alternately you can view the installation logs yourself by following the directions listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Mini Bridge extension not installed in CC setup?

I have Photoshop CC and Bridge CC installed on Windows 8 and both work fine but Mini Bridge wil not display as, error message states, the Mini Bridge Extension is not installed?
How do I install this extension?
Peter H

MiniBridge has been removed from CC2014. No idea if it will return.
Mini Bridge, Kuler, Exchange missing from Photoshop CC 2014
Suggested Workaround: Adobe Mini Bridge Work Around For Photoshop CC 2014 - YouTube

Installed Photoshop CC & Bridge CC Updates & now Bridge CC will not open at all

Operating System - Windows 8.1
Video Card Version - NVIDIA GeForce GT 640 Driver Version 9.18.13.3788 updated 6-19-14
Processor - Intel Core i7-3770 12 GB RAM, 64 bit OS
PS CC 14.21.1 x64
Bridge CC 6.1.0.116 x64 (I think, I cannot open the program to verify)
Problem:
Bridge CC will not open.
How Problem Began:
I installed three updates on 6-19-14 - Photoshop CC, Bridge CC and Photoshop CC 2014. After do that I could not open Bridge from the Windows Start menu, the task bar or from PS CC using File>Browse in Bridge or File>Browse in Mini Bridge. When trying to open from Start or the Task Bar the icon highlights for about 2 seconds then goes back to normal.
There is no error message or any message except when using File>Browse in Mini Bridge in which case a "waiting for Bridge CC..." message shows continuously but Bridge CC never launches.
NOTE: Bridge CC was used daily prior to updates with no issues.
Steps Taken So Far:
I uninstalled Photoshop CC 2014.
I uninstalled Bridge CC and Photoshop CC and reinstalled them with and without the above updates several times.
I called Adobe and was given this links with steps to try: Troubleshoot errors, freezes | Adobe Bridge | Windows, Mac OSI could not do any of the steps that required opening Bridge since that is the problem. But I did verify no other versions were running in background, updated video card dirvers and temporaily disable scanning programs.
I deleted the SwitchBoard file per this page: Error: Waiting for Bridge | Mini Bridge panel
I created a new Windows user and attempted to open through that user.
None of the above had any impact.
Does anyone have suggestions of next steps to try to resolve this issue and get Bridge CC working again?

With that kind of file corruption, you may need to do the following...
Sign out of your account... Uninstall... run the Cleaner...
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the cleaner after uninstalling and before reinstalling is needed
-https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Restart your computer... Sign in to your account... Reinstall
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have a new pc and have installed (again) CS5, however I can not install the updates Adobe Bridge, Adobe Extension Manager, Adobe Photoshop (64 bit) and Potoshop Camera Raw.

I have a new pc and have again installed CS5 however and unfortunately I can not install the updates Adobe Bridge, Adobe extension Manager, Adobe Photoshop (64 bit) and Photoshop Camera Raw ?

Hi DerrylS,
I would request you to try the below mentioned link for Error U44M1P7:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
If problem still persist and as in log file it says "Exit code 7", kindly try below mentioned links.
Link 1: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Link 2: http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
Thanks!
Atul Saini

My Bridge in Adobe CC 2014 did not install

My Bridge did not install Photoshop CC

Nobody can tell you anything without proper system info or other technical details. Just saying that it doesn't work is no good way to ask for help.
Mylenium

Beta cs6 will not install error bridge running but it is not running

Can not install cs6 error close bridge but bridge is not running

I am running windows 7, I check task manager and bridge is not running
Date: Mon, 26 Mar 2012 19:36:19 -0600
From: [email protected]
To: [email protected]
Subject: beta cs6 will not install error bridge running but it is not running
    Re: beta cs6 will not install error bridge running but it is not running
    created by Howard Pinsky in Photoshop CS6 - View the full discussion
Which operating system are you running? It might still be running in the background. You may want to check your Task Manager or Activity Monitor. Or better yet, if you feel uncomfortable with that, try logging out of your user account, then back in. That might kill any stray processes.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4293603#4293603
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4293603#4293603. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Bridge not installed

I just reinstalled CS5 Design Premium and Bridge did not install or show up in the package installer that I downloaded? Where is Bridge?

Hello,
Would you mind reposting this over in the Creative Suites forum? This is the AIR forum and you'll probably find better expertise over there.
Thanks!

Bridge did not install?

Bridge did not install in CS5 from my purchased download. It does not show up in the list of options to install. Help?

Not sure what that means. Bridge is part of Photoshop so if you install the defalut program it should install everything.

I try to install the adobe photoshop elements 4.0 Qh 72872 on my new mac but the cd ist not working it has a problem the install number on the cover is [s/n removed] what can i do i dont want the newer programs

adobe photoshop elements 4 cd is not working on my new computer can not install the programm what to do?
Message was edited by: Pat Willener - removed serial number.

Photoshop Elements 4 is too old. It was written for PowerPC Macs and will not work on new Intel Macs. There is nothing you can do about it.

Adobe Bridge CS4 will not launch ACR

I'm getting this message when trying to open an image from Bridge CS4 in ACR,
"Camera raw requires that a qualifying product has been launched at least once to enable this feature"
Any ideas how to cure this, I've downloaded the update 5.2.2., what is the correct location for this? Automatic update is just opening a box withe file in and I cant find the previous.
By the way ACR opens fine from Photoshop CS4.
Thanks
Philip James

Philip:
This has been discussed in the Camera Raw Forum: you may need to install the new ACR 5.2 plug-in in the correct place manually.
Eric Chan, "ACR 5.2 not installing in CS4" #1, 30 Nov 2008 9:17 am

Adobe Bridge CS6 will not open

Just started trial of Adobe Photoshop CC ( CS6 and Bridge CS 6)
Photoshop downloaded ok but Bridge CS6 will not open after installation.
I have used Adobe Bridge with CS2 before but since removing CS2 and installing CS6 and Adobe Bridge 6 64Bit Adobe Bridge will not open.
Help
watchet7

CS2 seems to conflict with CS6. One user found this to work. AppData is a hidden folder in case you try this.
I finally got it to launch via instructions from another web page. In my case, I am running Win 7 Professional 64-bit and previously loaded Photoshop and Bridge versions CS2 (along with Illustrator and InDesign CS2), which might have been part of the problem. The solution for me was to create an empty "Bridge CS2" folder in the C:\Users\[your user name]\AppData\Roaming\Adobe\. Worked like a charm.
You might have to use the Adobe Script Cleaner to get rid of traces of the CR2 files.

CP2102 USB to UART Bridge Controller installation not working

I have been working with Silicon Labs and Davis Instruments to try to get this driver installed on my iMac without any success. The driver was working on 10.4.11, but after I upgraded to 10.6.2 it is no longer recognized and does not show up in /dev, i.e. no cu.CP2102... or tty.CP2102... . I went to the Silicon Labs web site and downloaded the VCP driver kit that is used to talk to the Davis device (https://www.silabs.com/Support%20Documents/Software/MacOSX_VCPDriver.zip), performed the installation, and restarted.
I looked at System Preferences, then at Network Preferences. The <CP2102 USB to UART Bridge Controller> shows up as a grayed out Modem with Inactive Status. Clicking on the Advanced button, it shows the CP2102 as an Apple Modem. Under the WINS tab, it lists the CP2102's NetBIOS Name as IMAC-C7DFF1 and indicates that name is currently being used (possibly by another USB to UART adaptor I use to talk to an old Garmin, i.e. usbserial-FTCUSRHZ, and showing the same NetBIOS Name). Not sure if this is the reason that the CP2102 is not being seen.
I searched Console, Kernel, Install, and System logs for CP2102, among other things. I did not see any problems in those logs over the installation timeframe. I did notice that the CP2102 gets turned off after 10 seconds of no activity several times in the past in Kernel log, but not as a result of this set of installs. I scanned the various logs over the half hour of the install process, but did not see anything else of interest.
I opened System Profile and clicked on the USB selection. I expanded each of the USB entries and found the one that shows the CP2102. It shows
CP2102 USB to UART Bridge Controller:
Product ID: 0xea61
Vendor ID: 0x10c4 (Silicon Laboratories, Inc.)
Version: 1.00
Serial Number: 1205096541
Speed: Up to 12 Mb/sec
Manufacturer: Silicon Labs
Location ID: 0xfd110000
Current Available (mA): 500
Current Required (mA): 100
So, the CP2102 is being recognized, but the driver (cu. and tty.) cannot be found (or possibly is not installed).
I tied more things:
1. Performed a Mac reset of SMC and PRAM, with no joy.
2. Reinstalled Snow Leopard. Reinstalled the Si Labs driver package, and restarted. The CP2102 driver still does not show in the /dev directory (either as cu.CP2102... or tty.CP2102...).
3. I looked in /System/Library/Extensions and found the SI Labs kernel extension SiLabsUSBDriver.kext. I decided I should perform an operation I read about, i.e. touch /System/Library/Extensions, and reboot. Still no joy.
4. The System Profile still shows the same CP2102 entry.
Silicon Labs indicated that some how, based on System Profile information, the Product ID was changed from 0xEA60 to 0xEA61, thus pointing to the USBXpress driver and not the VCP driver. Silicon Labs only has Windows PC tools to fix the Product ID problem, so they cannot help.
Finally, I did some additional investigation to try to obtain more information. I moved my USB items around and looked in /dev. Here is what I observed (last boot of my Mac was 12:31 PM on 12/22 and the moving things around occurred at about 10:00 AM on 12/27):
crw-rw-rw- 1 wheel 18, 3 Dec 22 12:31 cu.Bluetooth-Modem
crw-rw-rw- 1 wheel 18, 1 Dec 22 12:31 cu.Bluetooth-PDA-Sync
crw-rw-rw- 1 wheel 18, 17 Dec 27 10:00 cu.usbserial-FTCUSRHZ
crw-rw-rw- 1 tty 15, 1 Dec 27 10:04 ptmx
crw-rw-rw- 1 wheel 9, 0 Dec 27 10:04 random
crw-rw-rw- 1 wheel 18, 2 Dec 22 12:31 tty.Bluetooth-Modem
crw-rw-rw- 1 wheel 18, 0 Dec 22 12:31 tty.Bluetooth-PDA-Sync
crw-rw-rw- 1 wheel 18, 16 Dec 27 10:00 tty.usbserial-FTCUSRHZ
crw--w---- 1 tty 16, 0 Dec 27 10:04 ttys000
There are a couple of devices that I cannot identify: ptmx, random, and ttys000. ttys000 is certainly out of place and I am wondering if it is the CP 2102 device. Its permissions certainly seem strange too (i.e. crw--w----) as well as its owner and group (tty and 16). In addition, the ptmx owner and group seem strange (tty and 15) as well. Just about everything else is owned by wheel or operator.
Looking at /etc/group, there is no group = 15 and the group name for 16 is "group." Looking at /etc/passwd, the owner tty (whose owner number is 4) really points to _uucp (Unix to Unix copy protocol). All of this information seems a little strange.
I would certainly like to get this driver installed properly, so I can talk to Davis device. Any help would be greatly appreciated.

I have been told by Davis that the Product ID (PID) for the Mac is 0xEA60 and the PID for Windows is 0xEA61. To solve the problem on the Mac only, you apparently have to get a PC and connect to the Vantage Pro console with the PC. Then you have to perform the following steps to reprogram the PID using the PC using Windows:
1. Install the USBXpress driver on the PC running Windows.
2. Then run AN144SW "CP210xSetIDs.exe" with "CP210xManufacturing.dll" and change the PID from 0xEA61 to 0xEA60.
3. Install the VCP driver on the Mac
4. Now, the CP210x device is ready to be used on your Mac with the VCP driver.
USBXpress: http://www.silabs.com/products/mcu/Pages/USBXpress.aspx
AN144SW: AN144SW
http://www.silabs.com/Support Documents/Software/an144sw.zip
The VCP driver is available for Mac OSX here:
http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
If you run Parallels or VMware or another virtual system to run WeatherLink on Windows, in addition to running WeatherLink on the Mac, you need to perform the following additional step after Step 1 above (note that you do not need a PC, just use the Windows on the virtual machine for Steps 1-4 above and Step 1a below):
1a. Install the VCP driver on the virtual machine for Windows.
The VCP driver is available for Windows here:
http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Now, the CP2102 will re-enumerate on Windows under the virtual machine. You will see that Windows is now recognizing it as a Virtual COM port device instead of a USBXpress device. In addition, you should see the CP2102 (with PID = 0xEA60) on your Mac.
Hope this information helps and solves the problem for all of us.

Bridge CC ist not installed

Similar Messages

Maybe you are looking for