Bridge CC (mac) does not display EXIF metadata info of my camera

below is the screen shot of the error:
i deleted CC prefs, uninstalled/reinstalled, tried many things. problem persists. any ideas, can you please help?
by the way, it does not display TIFFs:
thanks in advance,
murat

For anyone who may find this post wondering why they can't see the specific EXIF data for each photo... "Show Metadata Placard" may be what you're looking for. Click the drop down at the top right of your Metadata panel and tick "Show Metadata Placard." This will display a panel that looks like the info. panel on your camera (shutter speed, f-stop, iso, white balance, etc.).
I had to figure this out after getting frustrated by the fact that Camera Data (Exif) in the Metadata panel only shows the "Max Aperture Value" of the lens instead of the aperture value that you actually shot.

Similar Messages

ITunes does not display embedded metadata for my podcast

Tools in use:
Garageband (.m4a formatted files)
Blogger (http://gspodcast.blogspot.com)
Feedburner (http://feeds.feedburner.com/blogspot/GeekSpeak)
iTunes (http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=202319851)
I'm trying to figure out why iTunes is pulling in my blogger posted text instead of using the metadata embedded in my audio file for the GetInfo text descriptions.
As an example...
If you were to look at my Episode 1. The GetInfo data displayed reads:
Download Episode 1: iTunes Audio MP3 Audio The Road to Hellboy... We hang out with Writer/Director/Producer, Tad Stones and talk about past, present, and future, including his current project Hellboy: Sword of Storms. Lovely Copyright Stills Courtesy of Tad Stones Also... We discuss our Top News Stories. Recommended Movies. Recommended Comics. UPDATED: Podcast Notes... Transformers Cast List: Autobots Optimus Prime (MAC Truck) Bumblebee (VW Bug) Jazz - (Porsche) Ratchet - (Ambulance) Ironhide - (Fire van) Decepticons Megatron (was a Gun - Now an Alien Jet) Starscream (was an F15 Jet - Now an F22 Raptor) Brawl - (Tank) Bonecrusher - (Bulldozer) Barricade - (unconfirmed) Scorponok - (Scorpion) Frenzy - (Cassette tape) Blackout - (B1 bomber) Transcript of the Tad Stones Interview: Rich Text Format Plain Text Format
If it were pulling the embedded data it would have read:
Episode 1 - August 2006
Topics:
00:01:13 - Transformers Movie
00:16:50 - Batman Sequel
00:30:16 - Hellboy Sequel
00:38:03 - Interview w/ director Tad Stones
00:59:24 - Recommendations (Movies, Comics)
Any idea why this is happening and what needs to be done to fix it?
This problem does not occur if the audio files are directly downloaded and then played. Only when subscribed to in iTunes.

You don't resubmit: you just follow the instructions in the page you mention, specifically adding the 'itunes:new-url' tag in the old feed. As you haven't published the URL for the old feed it's not possible to check it to see whether it's all correct.
When you have done this it might well take a day or two for the iTunes Store to catch up: it won't be immediate.

Taking Z1 back to shops!! going back to Apple: Sony Bridge for Mac does not work

Been an Iphone owner. really, really wanted to try a good android phone, and the z1 looked the best. However
I have had the most frustrating experience- this junky bridge software looks slick but it simply does not work on a mac .
I have spent nearly a week mucking around on forums, reading technical 'get arounds' this is a £600 phone and its not good enough. It might be Apples fault for being so locked down, but sony should not claim it works when it has so many issues.
1) it spent 3 days trying to load my media. It eventually got stuck on 10 min remaining. I pulled the cable.
no contacts had even been added, however 1/2 the photos have, but they are a little jumbled up from when they were on my iphone.
2) i try to download the lastest sony for Mac update 3 times- it cant even do this and gets stuck
3) i then try to update the z1 with the latest software, again this also it gets stuck and hangs. OMG how can i update my software, do i have to buy a PC to go with the phone.
im annoyed now and cant play with my new phone
4) connect phone again and just ask it to do my notes, messages and contacts. This seems to work , but all the messages to my Girfriend are completley missing?? why?
5) i try to load a few folders, the pictures on the bridge pop up window seem to freeze , ai cant even drag these across, the same happens with my music
6) i have a lot of photos on my mac form my iphone 3000. If i choose to load them it only allows me to load all of them and not browse.
can i avoid bridge and view my z1 as a drive? also why wont any of the software update?
the next thing is it seems to have infected teh mac, the new version f itunes will not install correctly!! this is very unusual.
some one please helpme before i rant in my blog!

Hi Inventsc,
I apologize for the late answer. I'm sorry you haven't had a pleasant experience using Bridge. We are aware of the problems you mention and are working on it. As mentioned, you can connect your phone in MSC (mass storage mode). To do this, disconnect the phone, find USB connectivity settings and set it to MSC mode before plugging it in again.
Again, I am sorry it's not working properly for you.
Best Regards,
David

Bridge CS6 (Windows) does not display pictures taken with a Canon Power Shot G16 - even after updating Bridge. Does anyone knows what to do? Thank you in advance!

Does anybody knows what do do?

Update Camera Raw to version 8.3
Camera Raw-compatible Adobe applications
Camera Raw plug-in | Supported cameras

After upgrading to 10.2.2.12 on windows XP SP3 , itunes does not display any summary info or buttons/options. The buttons work but it does not display the text on the button or the options available.

I recently upgraded the iTunes software to 10.2.2.12 on my Windows XP laptop. Since then, iTunes stopped displaying the Summary info
, the text on the buttons, the various drop down options. The buttons seem to be working but I can't tell what that button is supposed to do
or the option I am selecting. This is preventing me from syncing my photos to the laptop.
this was not a problem with the previous version of iTunes.
Actions taken :
- I tried downloading iTunes again and repairing the install. That did not fix it.
- Don't want to uninstall it as I am worried that I would lose all the songs and the purchases etc.
1. Has anyone encountered this ?
2. Is there a solution for this ?
Many thanks in advance for your time and help
Nitin

bmalones44 wrote:
b noir, my Windows 7 machine is having the exact same issue as nsadal, and I have already confirmed that all six of the Segoe UI fonts are installed on my computer. Are any other Windows users having this problem with the 10.2.2.12 iTunes release?
Yeah it does, although the problem predates version 10.2.2.12. It's been around since earlier-on in the version 10s (at least).
It's usually Segoe UI font trouble on the Windows 7 systems too. Unfortunately, the Vortical troubleshooting technique only works on XP and Vista systems, so dealing with the issue on a Windows 7 system is trickier. (There's a bunch of different possible issues relating to the fonts that could be in play, and so the treatment tends to depend on which issue in particular you've got with the Segoe_UI fonts.)
For discussions of various Windows 7 variations of the "Missing text" thing, and possible treatments, see the following (unfortunately, rather long) topic:
iTunes 10.1 Missing Text

Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

Bridge CS3 Does Not Display Pentax PEF files

Hi,
I am running Vista and have Bridge CS3 installed on my Notebook. I updated Bridge to v 2.1.1.9 and have added Camera RAW 4.5. My problem is that Bridge does not display Pentax RAW files from a K20 camera (its on the supported list). DNG and JPG files show correctly. Bridge only shows a PEF Icon for each image. When you double click on the Icon, the file opens in Camera RAW 4.5 correctly and also in Photoshop CS3.
Can anyone tell me what I need to do to see the PEF images in Bridge?
Thanks
Keith

Revisit the download page, look at the instructions, and make sure you unzipped ACR to the correct folder, and you don't have an ACR in two places.

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
We are looking for some information what we can do to solve this problem. Could you help?

Can you play the video on YouTube?
*http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
Note that Mac lacks support to play MP4 files natively without using a Flash player.

Help! Bridge does not display Indesign Documents as spread thumbnails anymore.

Adobe please fix this issue. Adobe Bridge CC and (also CS6) does not display Indesign documents as spreads like it always used to. It displays a preview of the left hand page only not both left and right. This is very frustrating as this was a very useful feature from day one. Why is it not there and what can you do to get it reinstated asap.

Moving this discussion to the Bridge General Discussion forum.

Export with Metadata does not write EXIF Lens & GPS info

I use the Olympus E-3.
I've worked an entire project with Aperture 2 (now at 2.1.2), only to find out eventually that when exporting, aperture does not write the Lens info, and GPS section of the EXIF. This is bread and butter for me.
Did a search in the forum, and there was 1 other who encounter the same problem..
http://www.trick77.com/2009/02/01/aperture-doesnt-export-all-exif-header-info/
the workaround was to copy EXIF from the original file, using Exiftool with GUI on windowsXP. The result being that Adobe bridge and LR can read, while aperture cannot read.

I also encounterd this annoying problem... I just posted another message about this...

REMOTE app on iPhone does not display Cover Art

I use the Apple REMOTE App on my iPhone to control my iTunes music library on a Mac. The REMOTE App controls the iTunes playback properly. However, the Cover Art for each song does not display on the "song" screen - showing the song currently playing. Across my iPhone screen (where the Cover Art should appear) are the words containing album of the song). The name of the song and album correctly appear at the top of the screen.
What is interesting is that when I hit the back arrow (left side top on song screen), all of the Cover Art appears in small thumbnails. The Cover Art also appears in other displays (for example, the currently-playing Album) using REMOTE on my iPhone. This means that the cover art is being transmitted to my iPhone - HOWEVER IT DOES NOT DISPLAY ON THE SONG SCREEN.
Can anyone kindly help me resolve this - because I would really like the Cover Art to display properly on the song screen. Thank you. Dale

Nezmo, This is really unbelievable. I have suffered from the issue I described for SEVERAL YEARS. Today, for some reason I decided to make this post on the Apple discussion board. And, today the issue was fixed by Apple. I just downloaded the update to the REMOTE app and the cover art now shows beautifully on my iPhone 6 plus. Thanks. Dale

Messages on Mac app not displaying contact name

On Messages on my Mac, despite being synced up with iCloud, the Messages app does not display the contact names of anyone. It shows their phone numbers or Apple email addresses. Is there any preference I can change to make it show the contact names? If it exists I haven't found it. I also used the app meant to scrub contacts to make the phone number format conform with Apple's standard (xxx) xxx-xxxx please help!

HI,
I take it you are no longer on OS X 10.7.2 ?
The display of Names (and/or Pics) in Buddy Lists and the main Messages window (when in a Chat) in Mountain Lion is controlled from the View Menu > Buddy Names.
To set this choice the window has to be the "Front" one.
So the Messages window (CMD + 0 in the window Menu) gets brought to the Front when any sort of Text Chat is going On.
the View Menu > Buddy Names items is selected and navigation to the choice you want.
Full names is the First name, Last name as seen in the Contacts app (Formerly the Address Book)
Short Names are Nicknames (normally set via Messages) or First name only if no Nickname exists.
Handle is the Screen Names (If AIM), Jabber ID (If Facebook, GoogleTalk or other Jabber ID) or in the case of iMessages the current contact ID or iPhone number.
You can do the same to any Buddy list that you also display.
It can be used in Conjunction with the View Menu > Messages which has options to display Pics, Names or Pics and Names.
(Names now refers to whatever is set in the "Buddy Names" option).
8:49 PM Friday; November 16, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Reader X does not display drawing in PDF generated with LaTeX

I have a quite large PDF generated by pdfTeX, Version 3.1415926-1.40.11 which contains also XY-pic drawings rendered with Xy-pic version 3.8.2, PDF driver v.1.4.
One drawing does not display correctly in Adobe Reader X. Neither on Windows, neither on Mac. It does display correctly with following programs:
Preview on Mac OS X 10.5 and 10.6
Adobe Reader 9.x
Skim (skim-app.sf.net).
When I open this document with Adobe Reader X I get following error message when I hit page 58:
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem".
Where does one report rendering problems?
Damjan

See [https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Content does not display when page first opened

Hi All;
I have a contenta are/region which I have divided into multiple tabbed areas. I have two main tabs that divide the content into two major topics. Within each of these main areas I have added 4 to five tabs. One set for example holds a calendar, another tab a news release area and a third a content area for holding multiple folders of a department's documentation. The problem I am encountering is that when I first bring up the page all I see are the tabs and no matter what tab area is exposed the content within it is not displayed. For example, I start with the Calendar tab active (the calendar does not display). I then click on to say the document area, which displays all of its content's correctly. When I return to the calendar tab the calendar is displayed. My question... how can I ensure that the calendar (or any other tabbed area's content is displayed when the user first brings up the page?
PS. This is a hot topic since I will be demoing my pages to my managers next week in an effort to convince them that Oracle Portal is the way to go.

When I email the page to our server, the href links are missing.
You email the page to the server? What does that mean?
MaureenHayslett wrote:
I am using CS3 on Mac OS 10.6. The page previews perfectly in Safari. When I email the page to our server, the href links are missing. For example, the banner doesn't use the correct font, and the background color the the whole page is missing. Please go to http://www.crhcarchives.org/links.html
All of the other pages on the website look correct. Thank you.
Look at the source on that page. There is virtually no styling on it....
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<style type="text/css">

</style>
</head>
There is nothing telling the page which fonts to use, or which colors to use. Are you sure you have uploaded the correct page?

Image does not display on MacBook Pro (does on PowerBook G4!)

I created a slide in Keynote on my PowerBook G4 with an image dropped in (a pdf, I can't remember whether it was originally cut and past or dragged and dropped in). When transferring the Keynote presentation to a new macBook Pro (copying via a USB thumb drive), the presentation opens but the image does not display (everything else is OK).
The weird thing is that the image does show up in the thumbnail in Navigator View. It disappears in Light Table View, and then is gone when I return back to Navigator View. However, when I close and reopen the file, it appears again in the thumbnail.
When I click on the area where the image should be, the open squares show up around something. If I try to copy this object and past into another application (like Photoshop), I only get a blank image.
I have managed to get around this by laboriously copying the affected images on my PowerBook into separate pdf files, then transferring those files to my MacBook Pro and dropping them into place. However, I know I will find a missing image at some later date, when I no longer have access to my old PowerBook.
How to solve this problem?
P.S. Both machines are running Keynote 4.0.2 and Mac OS 10.5.2.

Thanks for taking a look!
The original image was created using Photoshop to cut out an image from a pdf file. Then it was either cut and pasted or dragged into Keynote.
Here are screenshots of what I get when I open the "droppedimage-17.pict" file (shown in the Show Package Contents window) using QuickTime on both machines. For the PowerBook:
http://www.cems.umn.edu/download/attachments/Powerbook.png
For the MacBook Pro:
http://www.cems.umn.edu/download/attachments/MacBook_Pro.png
Strangely, the Powerbook version looks like a correct grey-scale image, while the MacBook Pro looks like a B&W image.

Bridge CC (mac) does not display EXIF metadata info of my camera

Similar Messages

Maybe you are looking for