Bridge CC Missing Features from CS6, i.e. 'Open With'

Using CC - Windows 7, 64bit.
First of all - I am curious as if there is a way to set additional options for the "Open With" option when Right-Clicking on an Item? For example in previous versions of Bridge, I was able to right click on a PDF that would need to be opened in Photoshop or Illustrator and select that as an option as opposed to opening in the default Acrobat Reader. In CC, I am forced to leave Bridge, go into the application, and Open the file through the system dialog box. It's a function I didn't realize how often I used until I updgraded to CC - now I am forced to go through a timely hunt for the file through the servers instead of just being able to open it via Bridge. The current options to 'Open With' are Acrobat are available, also offers Adobe Reader, and Chrome as options - but none of the necessary options.
I realize I could drag and drop it - and at times this is appropriate - but often not.
Is there a way to activate or achieve this?
Secondly, and I have researched this some already but wanted to confirm - there is no way to create a PDF inside of Bridge anymore? I have installed the Output Module successfully, however the option to create the a PDF is still not there. Is this correct, or should the ability to create a mulit-page PDF be in the Output Module I installed? If so, where is it now located?
Thanks in advance for any help!
Best,
Adam

In CC, I am forced to leave Bridge, go into the application, and Open the file through the system dialog box.
That is not normal behavior (at least on my Mac I still have all installed applications as option under this menu). By default the open with menu under the righty mouse menu should show all installed applications on your system. It sometimes even shows them double in case of attached disks with back up etc.
This has not changed in Bridge CC. If you have those applications installed on your system at the same location as Bridge they should show.
First try a reset of preferences for Bridge with holding down control key while restarting Bridge and choose rest preferences from the provided menu.

Similar Messages

Missing Features from Z1 - Flip to Silence, Any key answer

Hi,
I've been using android for a bit now and have come to appreciate some subtle features available on the samsung touch wiz as well as the CM mod which are..
1) Any key to answer a call (Volume, power, etc) so i dont have to open the flap on the phone to see the screen.
2) Flip to silence. (Turn the phone over and it mutes the ringer and vibrator)
These are standard android capabilities and are present in vanila android 4.0 onwards.
If these functions are present in the latest update of the Z1, please let me know how to activate them. If not, please let me know the timeline to implement these rather simple features.
Thanks,
Mystic
Don't forget to give Kudos and / or mark the correct answer.

unfortunately it seems that you are right, it doesn't work anymore with the accelerometer I'm sure it have something to do with the update (sadly I just applied it to make sure I have the same version as you do) :/ It did work.. it doesn't now. So now we have to wait for the fix.. :/
Anyway, it is a good app and still full of useful features. Especially useful for me with my flip cover, it locks/unlocks the screen just by opening the cover.
I'm sorry the flip over doesn't work, I didn't know about it. It was ok before the update tho :/ I'm sure they'll fix it eventually...
When everything have failed already, try to read the manual.
Kudos mean I am helpful. Am I for you? Then support me back

CS6 apps in "Open with" menu with CC version OSX

Hi!
Why does CS6 apps appear in "Open with" menu with CC version OSX? I haven't installed them? how to remove? Apps do not work...
Screenshots:
https://www.dropbox.com/s/mtsq9oow5j25vbu/Screen%20Shot%202013-07-17%20at%2014.10.43.png
https://www.dropbox.com/s/6gwrtlyn1vltelq/Screen%20Shot%202013-07-17%20at%2014.10.24.png

Esaheiskanen, looking at the screenshot, I understand that it was removed properly.
You can simply go to >>>> Go> Utilites> Adobe Installer's and remove the CS6 App installed, Make sure you put a check on "Remove Prefrences" too.
Alternatively, you run the Creative Cloud Cleaner Tool, to remove the CS6 Version.
Cheers
LP

A3 Keyword missing feature from A2

Can someone help me please. One of the features I used extensively in A2 was the Keyword lookup feature which gave you a list of words that were in your master keyword list and auto completed when you started typing the word. You got this by selecting the metadata inspector and then selecting the Keywords tab at the bottom of the inspector. This lookup feature appears to be missing from A3, or at least I can't find it, nor is it listed in the manual. Has this feature been left out of A3?

Can someone help me please. One of the features I used extensively in A2 was the Keyword lookup feature which gave you a list of words that were in your master keyword list and auto completed when you started typing the word. You got this by selecting the metadata inspector and then selecting the Keywords tab at the bottom of the inspector. This lookup feature appears to be missing from A3, or at least I can't find it, nor is it listed in the manual. Has this feature been left out of A3?

Missing Fonts from CS6 - Namely Myriad

I have many templates for my work with typeset in Myriad, not MyriadPro. When I run CS6, everything works fine. Then I run the same file in CC and I get a missing font message from TypeKit and my font is gone. See attached screenshots. Please, I really need help solving this issue, otherwise I have no reason to have CC.
In CS6:
In CC:

Where was the font before? Do you have the font file someplace avaialble? Adobe apps don't remove fonts from the system, and they do need to be installed someplace to be available for use. Although there are quite a few fonts included and installed for you automatically when you install CS products, Caflisch Script is not one of them. http://www.adobe.com/type/browser/fontinstall/cs6installedfonts.html

Missing features from reinstalled PALM desktop

I had an administrator recently reinstall my PALM Tungsten E2 to my desktop (had to be removed due to ghosting of my computer). The Docs to Go app is no longer listed under my PALM apps on the desktop (it is on my handheld, is listed seperately on my destop and info does sync). Also my outlook is not linked to the Palm (never had it before but did check box that this time I wanted it linked). Also I no longer can choose different colors for the categories of meetings in my date book (A feature that is invaluable when I go back to look for dates for particualr types of meetings).
Post relates to: Tungsten E2

HardbeatZ wrote:
"That is poor advise palm desktop 4.2 is not a supported version of palm desktop for Windows Vista, installing that product on a Vista machine could cause many problems that users are not prepared to "deal" with."
Sorry, HardbeatZ - that may be the case, but I rather go for functionality over 'supported' any time.
Past experience with Desktop 6.x and a recent full restore of my Vista OS notebook to factory condition encouraged me to install my TX's Desktop 4.2 rather than 6.2.2 onto my machine.
The install went without issue (and without using Compatibility Mode) and I have regained all the conduits and Desktop views for the programs that came on my TX (including NotePad, Expense and VersaMail), I have full control over my Calendar and its settings (color-coding, Birthdays and Anniversaries) and, if I feel in a creative mood, a full range of Desktop skins. I use right click > Send to > Palm Powered Handheld to Install prc files. And the whole thing is perfectly stable (or as stable as any program is under Vista), so I guess I can live without it being 'supported'.
ACCESS has done even more than Colligan to damage the once-great Palm - and providing a Desktop that offers less functionality than past versions (albeit 'supported by Vista') is hardly any way to hold onto users - especially ones, like me, who have devices with older conduit possibilities.
If this Desktop does, sometime in the future, go unstable, it won't just be the Desktop I'll be replacing - and it most likely won't be for a Palm device.
Post relates to: Palm TX

Wierd printing problem. I have a TIFF file from a color negative scanned some years ago into Photoshop. Photoshop version probably CS2. Now printing from CS6. It prints with a black line around the image and mid grey outside that. Margins are white. Imag

Any suggestions as to how to fix this, please?

My printed colors look wrong. | Mylenium's Error Code Database
Mylenium

CC file saved in cs6, won't open with all layers in both versions

Hello there,
I really hope you could help me.
Recently i designed a scetch in illustrator CC and saved it as usual (without extra options).
Yesterday i worked on this same file in illustrator CS6, which i found acting weird but not paying attention and i saved it again as usual in the same file.
Today i wanted to work on it again in illustrator CS6, but there are missing layers and all the layers i made yesterday are grouped and are in clipping masks.
The worst part is i'm missing my sketch i made in illustrator CC!
I've tried to open the file in illustrator CC too but it shows exactly the same, no sketch and all layers grouped and in clipping masks.
I now know i had to save the file in illustrator CC with the extra options for multiple versions of illustrator
Could anybody help me?
The only positive thing is you can see the sketch etc. i made earlier in the preview when you want to open the file in illustrator cs6, that is why i hope it is not really gone!

When opening a new file with an old version (CC file with CS6 in your case) you always open the PDF part of the file. In this PDF almost everything is flattened. There are no live effects, brushes or stuff. When you then edit this file in the legacy version and save you alo effectively delete any live stuff that once was there in the AI part of the file.
Please read this:
http://rwillustrator.blogspot.de/2006/11/whats-in-file.html
When you want to edit newer files in older versions you always have to downsave. And even then things might get flattened, depending on which version exactly you save down to which other version.
So unless you have a backup of the old file, your content is lost.

Illustrator CS6 - error when open with wrong locale

Hey Everyone.
I hope this is the correct forum to ask this question...
I've the Master Collection oft Adobe CS6 for Windows in German. My Computers locale (german: "Gebietsschema") is set to japanese. If I try to open Illustrator I get an error, that I can't open it with this locale set. If I change the locale to "German (Switzerland)" it works.
Every other Adobe Program I tried out yet, has worked with the locale set to japanese...
Is there a way that I don't need to change my locale setting, when I want to use Illustrator CS6?
PS: I need the japanese locale to display japanese foldernames etc.
Thx, for your help
Toby

I downloaded the Adobe download Assistent with AI and I really thought I selected the english version. I then downloaded the AI, which somehow changed itself to the german version. Anyway the serial didn't work for the illustrator only, so I couldn't install it.
Maybe I'll reinstall the whole master collection, when I get my new SSD and Win8 in half a year or something.
Thx, for help anyway.
Toby

How do I change Bridge CC file association preferences from CS6?

I've changed Bridge CC file associations from CS6 manually to Photoshop CC. It remembers only for the open session then reverts back.

Does this thread help, expecially post #20? http://forums.adobe.com/thread/1330887?tstart=0

Bridge CS6 "open with" choose programms

OS: Win 7 Professional 64bit
Bridge: CS6 5.0.2.4
Hello,
how can I choose the programms that are shown in Adobe Bridge CS6 at "File->Open With"? I've got at least 2 programms which shouldn't be there, e.g. Firefox or COM Surrogate 6.1. I don't know, how they came into the menu. When I right-click the files in Windows Explorer, the "Open With" menu is filled with image editing and viewing tools. Everything is ok there. No Firefox and no COM Surrogate. Besides I want to add some tools like Photoshop or Windows Image Viewer and some more. When I add Photoshop in "Preferences->File Allocation", it is in the menu. But when I add Windows Image Viewer, Photoshop isn't there anymore. Is there a way to configure this? Especially COM Surrogate is a operating system network tool and shouldn't absolutly be there. I tried to set the file allocation to standard, but COM Surrogate and Firefox stayed in the menu.
Greetings
Thomas

Curt Y wrote:
Also, be sure to use a card reader for file transfer as a camera transfer can introduce errors.
I work with a Hasselblad medium format camera. I do not have a CF card in use. And I can tell that this worked absolutely flawless for many years. I NEVER had corrupted files caused by transfer. Many photographers using pro medium format cameras work the same way (Phase One, Leaf, etc.). They do not use CF cards but firewire cable. the problem arised when I started using the CS6 Bridge software. And it turned out that I get more and more corrupted files which appeared to be fine before. So from one shooting i.e. 1 file of 100 was corrupted first. Since I started using Bridge and changed RAW settings and worked with the same files after some days I have 5 corrupted files of 100 now. And NO it is not my system. It works fine with other camera RAWs where I have absolutely no problems. It is only the Hasselblad files. Though I still can open the Hasselblad RAW files with the Hasselblad software. The problems are only with the Bridge (respectively the raw editor) in combination with the Hasselblad files.
To me it looks like CS is corrupting the files since they worked fine at first - even in CS and after some days playing around in CS the appear to be corrupted. Funny that I can open the same files without problems using a different software - isn't it? ;-)
thanks for the link I will try it.... :-)

Is it possible to use a file from CS6 in CS5.5

I'm hoping to buy CS6 but I use CS5.5 at college. Is it possible to bring a file from CS6 into CS5.5. If not, where can I get CS5.5?

PS files are backward compatible if you save them with maximum compatibility enabled. likewise, AI files can be saved back to older versions. Of course in both cases specific features from CS6 will be lost or rasterized to pixels, so they are not editable in CS5.5. In Design might be a bit more tricky. It supports saving back to CS5.5, but this may completely ruin your documents, if you use the new dynamic layout features, Arabic text etc., so it's less useful to go that route.
Mylenium

Open With in Bridge?

I am not able to open Psd files from Bridge into CS6? Under Open with... no option available for photoshop...only Firefox or Picture Viewer... Is there something wrong with my program? I am able to open files from MB, just not Bridge itself.

Big button in file type associations - reset to default assoications.
Otherwise you have to click the down arrow and choose browse. Then navitage to your progam that says CS6.exe or CS6.app in Mac.

Adding and deleting applications in Bridge "Open With" menu

How do you add or remove applications from the context sensitive open with menu in Bridge CS4? Just to make sure everyone knows exactly which menu I am talking about,here is an example, right click a .bmp thumbnail image in bridge cs4, go to the "Open With" menu and select which application you want the image opened up in. I would like to add Photoshop cs4 to this menu and am unable to determine exactly how this is accomplished. Any and all help greatly associated. Thanks in advance Rick

Have you visited the preferences/file type associations and set the default for bmp to CS4?
If that does not fix it you will have to go into the OS and set that up as an option.

Making CS6 default 'open with' after installing CC

I'm in an internal Studio of 6, and we've just upgraded to CC from CS6. We're all having the same slowdown problems many other people are having with InDesign CC, so have taken the decision to revert back to CS6 until the bugs are fixed in CC. (Done all the troubleshoots to try and make it quicker; info panel, pre-flight etc)
However, now we've switched, we can't seem to change the default opening application from CC to CS6. The files we are trying to open we're created in CS6 and have yet to be converted to CC.
I've done the usual right click, 'open with', 'other...', select CS6 and 'always open with'. Then when I right click, 'get info' and click 'change all...' it reverts to CC?
Anyone know how to stop this? Obviously the newer files created in CC will need to be saved as an 'IDML', but it's the older ones I want to open with CS6 by default.
We're working on MacPro's, 10.6.8, 2.8GHz Quad Core Intel Xeon, 12gb 1066 MHz DDR3 for info.
Thanks

On a Mac, go to the finder and then right click (control-click or two finger click). Go to the "get info", in the open with drop down choose "inDesign CS6" and underneath that click "change all". Should solve the problem.

Bridge CC Missing Features from CS6, i.e. 'Open With'

Similar Messages

Maybe you are looking for