Bridge CC Update Error 49

I get this error trying to update from Adobe CC Desktop..?

Hi,
Additionally you may try to apply the updates manually from the link below:
WIN: All the Adobe CC Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools
Kindly follow the very important instructions before download.
Regards,
Sheena

Similar Messages

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Someone who can help me to do.  Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

    Someone who can help me to do.  Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

    be sure to use the correct update (32 or 64 bit).
    http://www.adobe.com/downloads/updates/

  • Adobe Bridge CS 6 error - crash

    Hey
    I have Adobe Photoshop CS6 elements. It has Adobe Bridge CS6. If I want to run Adobe Bridge receives an error:
    Problem signature:
       Problem Event Name:                   APPCRASH
       Application Name:                         Bridge.exe
       Application Version:                      5.0.2.4
       Application Timestamp:                 50d9a019
       Fault Module Name:                      Bridge.exe
       Fault Module Version:                   5.0.2.4
       Module Timestamp error:             50d9a019
       Exception Code:                           c0000005
       Exception Offset:                          000000000036af69
       OS Version:                                 6.1.7601.2.1.0.768.3
       Locale ID:                                     1045
       Additional Information 1:              dca5
       Additional Information 2:              dca5eef3eb4639786ac397e2f866e6e1
       Additional Information 3:              4199
       Additional Information 4:             4199b882f4916698ed37542ab754498a
    Read our online privacy statement:
       http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0415
    If privacy statement online is not available,
    Read our privacy statement offline:
       C: \ Windows \ system32 \ en-US \ erofflps.txt
    Reinstalling Adobe Photoshop nothing has changed. Adobe updates are installed.
    The operating system is Windows 7 64-bit.

    Hello, wck.org. As it happens, there's no such thing as "Adobe Photoshop CS6 Elements". Do you have Photoshop CS6? I would suggest that you would do better posting in the Bridge forum, since PSE isn't based on CS6 and doesn't include Bridge, so there aren't many people here who can help with problems with Bridge  CS6:
    http://forums.adobe.com/community/bridge

  • Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter

    I'm using SCVMM managing my Hyper-V machine.
    I have three physical network adapter on my hyper-v host as below:
    I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
    I can access the internet but i got the windows update error as below
    If i NAT the internal virtual adapter traffic to the WIFI physical  internal facing adapter, windows update is fine.
    I'm using my hyper-v server windows NAT feature.
    I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
    if anyone here can help, that's would be much appreciated.
    2013-03-27    18:38:25:627     868    ba4    AU    ## START ##  AU: Search for updates
    2013-03-27    18:38:25:627     868    ba4    AU    #########
    2013-03-27    18:38:25:627     868    ba4    AU    <<## SUBMITTED ## AU: Search for updates  [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2013-03-27    18:38:25:627     868    934    Agent    *************
    2013-03-27    18:38:25:627     868    934    Agent    ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-03-27    18:38:25:627     868    934    Agent    *********
    2013-03-27    18:38:25:627     868    934    Agent      * Online = Yes; Ignore download priority = No
    2013-03-27    18:38:25:627     868    934    Agent      * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
    or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2013-03-27    18:38:25:627     868    934    Agent      * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
    2013-03-27    18:38:25:627     868    934    Agent      * Search Scope = {Machine & All Users}
    2013-03-27    18:38:25:627     868    934    Agent      * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
    2013-03-27    18:38:25:627     868    934    EP    Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
    2013-03-27    18:38:25:627     868    934    EP    Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
    2013-03-27    18:38:25:627     868    934    Setup    Checking for agent SelfUpdate
    2013-03-27    18:38:25:627     868    934    Setup    Client version: Core: 7.8.9200.16465  Aux: 7.8.9200.16451
    2013-03-27    18:38:25:799     868    934    EP    Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
    2013-03-27    18:38:25:799     868    934    Misc    Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2013-03-27    18:38:25:815     868    934    Misc     Microsoft signed: Yes
    2013-03-27    18:38:25:815     868    934    Misc     Infrastructure signed: Yes
    2013-03-27    18:38:26:002     868    934    Misc    Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2013-03-27    18:38:26:002     868    934    Misc     Microsoft signed: Yes
    2013-03-27    18:38:26:002     868    934    Misc     Infrastructure signed: Yes
    2013-03-27    18:38:26:002     868    934    Setup    Skipping SelfUpdate check based on the /SKIP directive in wuident
    2013-03-27    18:38:26:002     868    934    Setup    SelfUpdate check completed.  SelfUpdate is NOT required.
    2013-03-27    18:38:26:440     868    934    PT    +++++++++++  PT: Synchronizing server updates  +++++++++++
    2013-03-27    18:38:26:440     868    934    PT      + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Nws Failure: errorCode=0x803d0014
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Original error code: 0x80072efe
    2013-03-27    18:38:28:846     868    934    WS    WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: There was an error receiving the HTTP reply.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: The connection with the remote endpoint was terminated.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: The connection with the server was terminated abnormally
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Web service call failed with hr = 80240440.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Current service auth scheme='None'.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
    2013-03-27    18:38:28:846     868    934    WS    FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: PTError: 0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: Sync of Updates: 0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: SyncServerUpdatesInternal failed: 0x80240440
    2013-03-27    18:38:28:846     868    934    Agent      * WARNING: Failed to synchronize, error = 0x80240440
    2013-03-27    18:38:28:862     868    934    Agent      * WARNING: Exit code = 0x80240440
    2013-03-27    18:38:28:862     868    934    Agent    *********
    2013-03-27    18:38:28:862     868    934    Agent    **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-03-27    18:38:28:862     868    934    Agent    *************
    2013-03-27    18:38:28:862     868    934    Agent    WARNING: WU client failed Searching for update with error 0x80240440
    2013-03-27    18:38:28:862     868    598    AU    >>##  RESUMED  ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2013-03-27    18:38:28:862     868    598    AU      # WARNING: Search callback failed, result = 0x80240440
    2013-03-27    18:38:28:862     868    598    AU    #########
    2013-03-27    18:38:28:862     868    598    AU    ##  END  ##  AU: Search for updates  [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2013-03-27    18:38:28:862     868    598    AU    #############
    2013-03-27    18:38:28:862     868    598    AU    All AU searches complete.
    2013-03-27    18:38:28:862     868    598    AU      # WARNING: Failed to find updates with error code 80240440
    2013-03-27    18:38:28:862     868    598    AU    AU setting next detection timeout to 2013-03-27 12:38:28
    Ricky

    some more interesting article i've found so far
    http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
    http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
    http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
    Ricky

  • How do I fix update error code U44M1I210?

    I have not been able to update Photoshop CC or Bridge from Creative Cloud or about 3 weeks.  I keep getting Error Code U44M1I210,  Have tried the recommendations on the site and the update will not load from the Adobe home page either.  Have deleted and reinstalled the Application Manager several times, but no success.  Have seen several recent postings about this on the web, but no solution from Adobe.  Any suggestions?  My system is Win 7 64 bit.  - thanks

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Better solution for Photoshop CC update error U44M1P34

    How can I fix Photoshop CC update error U44M1P34 without uninstalling ALL OF MY ADOBE PRODUCTS !?

    Hello. I'm having the same problem to install the update Photoshop and Bridge.
    The error is U44M1P34 and I've done the procedure of uninstalling and reinstalling the Adobe applications. It did not work.
    I suspect that is because I use Windows 8 in Brazilian Portuguese, which makes the Program Files directory call up Arquivos de Programas. I suspect that the application of the CC does not recognize the name.
    Please, help me find a solution.
    Thanks

  • Windows Vista update error code 80070490

    Hi there,
    Can anyone help me with this issue! I've tried everything under the sun to fix this problem so I'm hoping you's more in the know than myself can help!!??

    Hi
    This Vista update problem seems to be known to Microsoft:
    +If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that's needed to install updates is corrupt. To correct this problem, you'll need to repair Windows. Repairing Windows won't damage your personal files or the programs that are installed on your computer.+
    Here more details how to fix this issue:
    [Windows Update error 80070490|http://windows.microsoft.com/en-us/windows-vista/windows-update-error-80070490]

  • Windows Vista Update Error 80072EFD

    got Vista Home Premium 32bit and updates were running smooth till January. In Feb- March updates just stopped to work due error code 80072EFD. Have tried with Fixit ( doesn't work as well ) got an error 8004FE2C, and Win Defender got  the same error
    as updates 80072EFD. My laptop is without viruses ( have ESET Smart Security ) and no maleware ( have Malewerebytes ). Already had  checked all Win Update services were they running, then resetting them and added the links of microsoftupdates.com in ESET
    and Explorer ( preventing form blocking the site) even closed all firewalls and security.....without any success. Still got the same error  80072EFD!! 
    Can u please help ! :( 

    Try to use the below to see if it helps http://windows.microsoft.com/en-sg/windows/windows-update-error-80072efd#1TC=windows-7 And try resetting the windows update components http://support.microsoft.com/kb/971058
    Http://blog.theinfraguys.com | Please remember to click “Mark as Answer” on my answer if it helps. :)

  • Windows Vista- Update Error 80044016

    Good afternoon!
    Friend of mine is struggling with Windows Vista SP 2 - Windows Update.
    So far I tried to:
    -Disable AV, Disable Firewall
    -Clean boot
    -Automated solution - fix it
    -Sfc
    -checksur
    -re-register responsible dll's
    regsvr32 wuapi.dll
    regsvr32 wuaueng.dll
    regsvr32 atl.dll
    regsvr32 wucltui.dll
    regsvr32 wups.dll
    regsvr32 wuaueng1.dll
    regsvr32 wucltui.dll
    regsvr32 wups.dll
    regsvr32 wuweb.dll
    regsvr32 wups2.dll
    regsvr32 msxml.dll
    regsvr32 msxml3.dll
    regsvr32 msxml2.dll
    regsvr32 qmgr.dll
    regsvr32 qmgrprxy.dll
    -currently running Malicous software removal from safe mode in case of possible hijack.
    -PC is not under domain influence or behind proxy.
    Fact is this occured after clean install. He tried to reinstal it again and issue persists.
    Could you please check windowsupdate.log bellow and try to tell me what should be my next step?
    Due to the fact that my account is not verified yet, I can't post log here therefore I've chosen pastebin as the best location.
    pastebin.com//WJDzA6eq
    Thank you very much!

    Also I wanted to tell that Update error code is : 80044016
    Regards,
    Chrobak77

  • Media Encoder CC (2014) Update Error (U44M1P34)

    Just did a batch of CC updates and Media Encoder CC (2014) failed with error U44M1P34. Any suggestions on how to fix this?

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Photoshop CC 2014 won't update. error U43M1D204 iMac Yosemite

    I have Photoshop CC 2014 and Bridge CC on an iMac (late 2013) running Yosemite 10.10.3
    The creative cloud app tells me to update Photoshop and Bridge.
    When I click the update button I get an update failed message with "There was a problem updating Photoshop/Bridge."  The more information field says "The download appears corrupted.  Please try to download again. (U43M1D204)
    When I try again exactly the same thing happens.
    Can anyone help please?
    UPDATE:
    After trying the renaming of the 1.0 folders in the /library/application support /adobe/AAMUpdater and ~/library/application support /adobe/ AAMUpdater I was still having the same problem.
    Then tried downloading the adobe camera raw 9.0 update directly from Adobe Camera Raw 9.0 Update for CC and ran the dmg setup file.  Both photoshop and bridge were updated and when I logged out of CC then logged back in again all of my apps were up to date.
    Hope this helps others.

    Oh, Thank you very much. I was download ur file and installed it but it doesn't work. After that I restart the computer and open CC again and click update all, it's work ! My app continue to update. Tnk u very much
    Hope others see this post.

  • Adobe Bridge: Bridge.exe Application Error

    When startup Adobe Bridge: Receive windows error: The Exception unknown software exception (0x000000d) occurured in the application at location 0x006d783e.
    Adobe Bridge part off Adobe Photoshop CS4.
    An re-install of Photoshop CS4/Bridge even same problem.
    Anybody an idea?

    Hi Curt,
    Thank for your quick answer.
    I'm sorry actualy i'm not the user so i have to wait till monday to find out if the solutions works.
    I'l let you know?
    Regards,
    Richard

  • Windows 7 PRO GP update error

    Windows 7 PRO GP update error        
    We have a very peculiar problem
    We have a Primary  DC & Secondary DC installed in all our office ( Windows 2008R2). The Domain name is abc.com for all the Offices and the replication between the DC's happen in between the office happen without a problem.
    The clients in each of the offices gets authenticated from the DC in the respective office.
    But for a group policy update it gives an error as below
    "Computer policy could not be updated successfully.  The following errors were encountered: The processing of Group Policy failed.  Windows attempted to read the file
    \\<FQDN>\sysvol\<FQDN>\Policies\{BD732AAF-016F-11D2-945F-00C04Fb984F9}\gpt.inifrom a domain controller and was not successful.  Group Policy settings may not be applied until this event is
    resolved. This issue may be transient and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    The error happens only on some clients.
    We are able to Ping, connect to the local DC and the client gets the IP from the local DC and also gets authenticated by the local DC for log on.
    On the PC which gives an error if we try to ping domain name - abc.com it returns the ip of the DC in a another office and not the local DC.
    Request to suggest a solution / tips to identify the problem

    Thanks for your reply
    Please find the IPConfig Details  as requested
    Windows IP Configuration of CLIENT with Problem
       Host Name . . . . . . . . . . . . : NP
       Primary Dns Suffix  . . . . . . . : ALT.COM
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : ALT.COM
    Ethernet adapter Local Area Connection 2:
       Connection-specific DNS Suffix  . : ALT.COM
       Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
       Physical Address. . . . . . . . . : 00-19-99-F2-5B-BC
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::bc5c:5976:37b2:d42a%14(Preferred)
       IPv4 Address. . . . . . . . . . . : 10.102.22.72(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Tuesday, July 08, 2014 8:02:23 AM
       Lease Expires . . . . . . . . . . : Wednesday, July 09, 2014 8:02:23 AM
       Default Gateway . . . . . . . . . : 10.102.22.1
       DHCP Server . . . . . . . . . . . : 10.102.10.10
       DHCPv6 IAID . . . . . . . . . . . : 318773657
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-FE-B8-99-00-19-99-F2-5B-BC
       DNS Servers . . . . . . . . . . . : 10.102.10.10  10.102.10.11
       Primary WINS Server . . . . . . . : 10.102.10.10
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.ALT.COM:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : ALT.COM
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    ===========================================
    Windows IP Configuration on DC
       Host Name . . . . . . . . . . . . : ALTHODC03
       Primary Dns Suffix  . . . . . . . : ALT.COM
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : ALT.COM
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network C
    on
       Physical Address. . . . . . . . . : 00-19-99-7E-7F-62
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.102.10.10(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.224
       Default Gateway . . . . . . . . . : 10.102.10.1
       DNS Servers . . . . . . . . . . . : 10.100.10.10
                                           10.102.10.11
                                           127.0.0.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{4353BDBD-759C-45E1-A523-621CC16121AA}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    =======================================================
    We do not use Sysprep and also we normally do not use imaging
    Domain Time is in Sync with DC & Client

  • Open Delivery value update error in credit management

    Hi
    We have credit management active at delivery level. The value of open deliveries is not getting updated correctly for items with material substitution (material determination). For all other items, its getting updated correctly.
    E.g Let say the credit limit set in FD32 is 10000 and the credit limit used % is 98 and the credit exposure value is 9800.
    Now when I create an order with qty 10 for mat A, it creates a sub item B due to material determination and the value of the item is Rs.1200. In our system, the sub item with TAPS item category is relevant for pricing.
    Then I create a delivery in VL01N and save it.
    Now if i check in FD33, the credit limit used should be 101% and the credit exposure value should be 11000, but its not updating the open delivery value correctly. Its not considering the value of the new delivery.
    However, If I add a normal item (TAN) in the same sales order and create a delivery for that item and save it, its updating the credit exposure based on the value of the normal item in the delivery correctly.
    How to make the system update the open delivery values correctly by taking the items with material determination also into account.??
    Please advise if any specific settings need to be done.
    Regards
    Madhu

    Hi,
    the system updates open values for credit management. These are:
    Open sales order credit value (S066-OEIKW)
    Open delivery credit value (S067-OLIKW)
    Open billing document credit value (S067-OFAKW)
    The system updates the open values in standard SIS structures S066 and S067. Technically, the structures are transparent tables. You can display the contents using transaction SE16 or using table maintenance.
    The S067-OLIKW will give the open delivery credit values credit.Check in you system whether this table is updated with the delivery values for the credit account(customer number)
    RVKRED77 u2013 Reorganize SD credit data
    When updating errors occur, it enables you to reorganize the open credit, delivery and billing document values.
    If the table is not updated run this report in background.
    Regards,
    Saju.S

Maybe you are looking for

  • Automatic TO creation

    Hi i need a help for following question, In warehouse movement type customization we can set a indicatior for automatic TO creation(background processing), but where to define this indicator and interval for this background processing like after ever

  • Apple mail freezes constantly under Mavericks

    Every since I upgraded to Mavericks last year, Apple Mail constantly freezes. It opens, I generally can get mail, but if I leave it open for a bit, it either stops receiving mail or when I try to send an email it freezes. The only way out is to force

  • Selected Lov Value as Parameter to Concurrent Program in oaf

    Hi, iam new to OAF ,Can any one please help me how to pass selected lov value as a parameter to the Concurrent program in oaf. i created one lov in oaf page after selecting value in lov i want that value to be passed as parameter to concurrent progra

  • Generate Excel File using Java

    Hi, could any one tell me how can I create an Excel file using java. I can create the file using PrintWriter and other IO classes. But how do I insert the data in to different cells and rows. Any help would be greatly appreciated. Thanks in advance f

  • Unable to update to iOS4.3

    I am facing issues wile downloading iOS 4.3. Just when the download is about to complete say 97% or 99%, it shows network error and cancels everything:-( Tried 4 times already... still facing the same issue. Anyone facing similar issues?