Bridge cc what is "develop settings" fountain and target

working with .NEF files
when I right click, I see develop settings, and under that fountain and target.
I can't find documentation anywhere for these.
What do they do?

Wow! I guess I've uncovered a great mystery!!

Similar Messages

HT4623 sir i have installed ios 7 but cant go inside.. i wanna ask what is developer account? and is it paid?

sir i have installed ios 7 but cant go inside.. i wanna ask what is developer account? and is it paid?

iOS7 is for Developers only, if you are not a Developer you obtained iOS7 illegally and as such have voided your warranty, and forfeited any help from Apple and these forums as well.
We can not help you here, you are on your own.

Firefox will not start after updating: Check virtualization settings!! what is virtualization settings? and how do I do it!?

you didn't provide clear information about this for public. I don't know what the heck is virtualization settings? could you please elaborate in your help, thanks.

This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
http://support.mozilla.com/en-US/questions/880170

Problem with JPGs Downlaoded with Nikon Transfer - Can't Apply Develop Settings in Bridge CS4 and ACR 5.3 Settings Don't Stick

I have found what I believe is a "problem" with JPGs downloaded using Nikon Transfer (ver 1.4.1) and processing same in Adobe Bridge CS4 (Develop Settings) and/or Adobe Camera Raw 5.3 (Photoshop CS4 and Elements 6 as hosts).
Anyone using these programs in their workflow?
The problem, quite simply, is that neither ACR settings (nor Bridge CS4 Develop Settings) "stick" when applied to JPGs that have been downloaded via Nikon Transfer ver 1.4.1.
The same images from the same cameras (D300 and D90), downloaded moments later using Nikon's predecessor software PictureProject work just fine in both Bridge and ACR. Develop Settings appled in Bridge immediately are seen, and JPGs opened in ACR, and settings applied, then "Done" immediately stick and are reflected in Bridge.
If someone else is processing their JPGs in this manner, please let me know, as I have reported the problem to both Nikon and Adobe, and although I have tested it on two different cameras and two differnt laptops, I would like to get an impartial result as well.
One other test, the problem does not seem to affect Nikon's RAW (NEF) format files downloaded from a D2x using Nikon Transfer. More/different test are forthcoming.
Thanks
jeff

ALoverofNikon wrote:
I have generally thought that using the camera manufacturer's software was the safest and most conveneint
Can't say one way or another on that statement about using manufacturers' software. Since Adobe has to interpret each camera models' RAW format having the latest ACR seems to be the best option. But if the manufacturers' software is more convenient, and you get the same results then use it. But it does appear you are not getting what you want, so suggest you try a duplicate test run with images straight from the card reader to Bridge and see if you still have same problems.
I do know it is widely recommended that using a quality card reader gives you more reliable data than getting the pictures straight from the camera. Does not seem intuitive, but that has been experience of many.

What happens when there is a conflict between develop settings stored in file metadata, and the catalog?

Hello,
Wondering if someone could quickly help me with understanding how develop settings are read back into lightroom... (I'm using lightroom 3.6) as I've just had a bit of a panic that my mis-understanding of the system might have screwed things up a bit!
As I do all my image tinkering on a laptop with a small disk, I am often archiving directories of images to an old server we have, and then just bringing them back onto my laptop whenever I need them again. I have a single lightroom catalog on my laptop, and I thought (I now think wrongly!) that all my develop settings updates were stored solely in the lightroom catalog on my laptop, and as long as I kept a copy of the original jpeg images knocking around somewhere so that I could restore them to my laptop when needed, that I could always get back to the most recently edited version of my images. Often I copied a directory of images from the server to the laptop, edited them with lightroom, then deleted the jpg files from the laptop thinking the originals left on the server would be sufficient to restore my work later.
However recently just before deleting a batch of jpgs from the laptop, I did a quick compare with the server and was horrified to realise that the files where different, and that changes *are* written to the jpeg files! Looking in lightroom I have the 'Include Develop settings in metadata inside JPEG [etc] files' turned on.
My questions would be:
1 - Have I lost work by effectively deleting the metadata from the jpeg files or is it also preserved in the catalog?
2 - What would happen if some develop settings for an image were stored in the catalog, and a completely different set of develop settings were stored in the file - which would take priority?
3 - Have I screwed up and if so is there anything I can do to minimise the damage? : {
Many thanks for any advice!!
Nicola

My questions would be:
1 - Have I lost work by effectively deleting the metadata from the jpeg files or is it also preserved in the catalog?
2 - What would happen if some develop settings for an image were stored in the catalog, and a completely different set of develop settings were stored in the file - which would take priority?
3 - Have I screwed up and if so is there anything I can do to minimise the damage? : {
1. Lightroom ALWAYS stores the edits in its catalog file.
2. Lightroom ALWAYS uses the edits in its catalog file. The information stored in the JPG is NEVER used to display the image in Lightroom.
3. As long as you don't eliminate the photo from the catalog, you are fine, your edits are present in the catalog file and Lightroom will use those to display the image.
As I do all my image tinkering on a laptop with a small disk, I am often archiving directories of images to an old server we have, and then just bringing them back onto my laptop whenever I need them again.
If you have moved the photos to the server, using Lightroom (or using Adobe Lightroom - Find moved or missing files and folders), there's no need to bring them back to your laptop. You can leave the photos on the server, and access them on the server, and everything works properly

What does "Include develop settings metadata inside JPEG, TIFF, and PSD files" do?

I am wondering what the option "Include develop settings metadata inside JPEG, TIFF, and PSD files" found in catalog settings/metadata does? what happens if you uncheck it?

Bob12312321 wrote:
also when this is unchecked will lightroom still save keyword changes to raw(nef) files? thank you!
Metadata ("real" metadata like keyowords nor develop adjustments) are never saved into non-DNG Raw files (like .nef, .cr2) directly. With these files, there is always a so called sidecar file (with the extension .xmp) created to hold the XMP information.
And yes, if the option is unchecked, LR will save the keywords to the XMP sidecars, when you perform "Write Metadata to File" or have the autowrite option active.
Beat

Cannot copy or clear develop settings in Adobe Bridge

okay, here's my problem. all of the sudden i am no longer able to clear or copy develop settings when i right click on raw files in adobe bridge. the problem seemingly began out of nowhere. when i attempt to use these functions i get the following error message: "Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature." i have googled this to no end and it seems there is no solution that actually works. just to be clear, all of the results for this search ive found seem to be users getting the same error message and the inability to OPEN raw files from bridge; this is NOT my issue. i can still open raw files from bridge with no problems whatsoever but i just cant clear my develop settings. ive googled "cannot clear develop settings" and have found nothing specific to my situation. ive tried resetting bridge and camera raw to their default settings and that hasnt worked. ive moved my cache to a different drive and that hasnt worked. i opened bridge from photoshop and that also hasnt worked. id like to think there is a solution that doesnt require me to uninstall and re-install the entire application. any help would be greatly appreciated.

any help would be greatly appreciated.
For that more info is needed like system, specs, versions etc. Check this for a start:
https://forums.adobe.com/thread/375816?tstart=0
Also in this forum are several threads with the qualifying problem subject.

Bridge CS4 does not see ACR presets in Develop Settings

I think that this is new with CS4. I create a Preset in ACR in the Preset Panel. That Preset works fine on photos in ACR. The Preset is listed in the Camera Raw Settings folder in the Finder.
But, when I try to apply the Preset in Bridge via Edit > Develop Settings, the Preset does not appear. Is this correct? I believe that a preset did appear in CS3 in Bridge Develop Settings.
The preset was created with a Raw file from the 1DS MkIII. Could it be camera-related?
Am I missing something here?
Thanks,
Sonny

Strange. I Quit Bridge. Relaunched Bridge, and the Presets now appear in the Develop Settings list.
I presume that I should not have to Quit and relaunch for the presets to appear?
I created another preset. It only appeared in Develop Settings when I again quit and relaunched Bridge, even though it appears in the Camera Raw Settings folder.
Sonny

LR4 and develop settings in DNG files

I spent a day developing a set of DNG images in LR4 and then used Bridge to rename all the files. When I sync'ed the folder in LR the develop settings in the DNG files were not there, all zero'ed out. I thought the develop settings were stored inside a DNG file by default? Do I need to tell LR to do that? I don't see where that setting might be.

In Lr, I think the default is to store develop settings in catalog only.
To store in DNG files, hit Ctrl/Cmd-S, or enable auto-save xmp in prefs.
Edit Menu -> Preferences -> General Tab -> Catalog Settings -> 'Automatically write changes into XMP'.
I prefer the manual method for a variety of reasons, but others prefer the automatic method (mostly so they don't forget I guess).
Cheers,
Rob

CAN'T USE DEVELOP SETTINGS IN BRIDGE

HELLO,
i am using cs3 extended and my camera is a canon 40d. i downloaded camera raw 4.2 and installed it. i am able to see my raw images in bridge but am not able to use the develop settings tab under the edit tab. it is greyed out. so any help would be appreciated.
thanks
tim

You installed the Camera Raw plug-in in the wrong location.
Read the instructions again and pay attention to the location of the Library; it is NOT your user library but your ROOT Library.
Last but not least, download and instal ACR 4.6. All versions of ACR support all camera models supported by previous versions of the plug-in, and they contained unannounced, unpublicized bug fixes, enhancements and improvements. There's no reason to use an obsolete version like ACR 4.2.
Wo Tai Lao Le
我太老了

What are the settings for iPhone, iPad and iMac to sync ical and contacts?

How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

What should the settings in Preview be if scanning documents and the faxing them

I'm trying to scan documents using preview and my printer. Once I scan the documents, I save them in dropbox and later fax them using SFax. However, the faxes are coming out blurry and very difficult to read. What should the Preview settings be on? PDF? File Format? How many dots per inch? What are standard settings?

I am a recently retired webmaster and fortunately have fewer eye problems than most people my age. I have astigmatism and, in common with most people over 40, have reduced accommodation. Perhaps because I have spent considerable time in front of computer screens my eyes focus most easily at screen distance. I use low power long distance glasses to watch television and drive after dark. I use low power reading glasses for small print such as maps and repairing small items. Most of the time I don't need glasses.
There is no such thing as standard settings for font size or style. It is entirely a matter of personal preference.
Here are my settings:
34cm x 27cm Apple Studio Display set to millions of colours and a resolution of 1280 x 1024
Safari 'standard' font set to Geneva 14
Safari fixed width font set to Courier 14
Default encoding set to Western (ISO Latin 1)
Minimum font size set to 10
Geneva is a very old Apple font optimised for screen use. I still find it more readable than other fonts under a wide range of conditions.
I assume you know about Zoom settings to override the above:
cmd + to increase size
cmd - to decrease size
cmd 0 to return to 'normal' size
I set 'Zoom Text Only' on the view menu.
You can also create your own style sheet to obtain even more control. Here is a Google search link about these:
https://encrypted.google.com/search?q=browser+%27style+sheet%27+%27visually+impa ired%27&as_qdr=all&newwindow=1&num=100
I have written many style sheets but not for visually impaired. I am happy to assist if required.

TS4000 What is the "correct" date and time settings for icloud reminders?

What is the "correct" date and time settings for icloud reminders?

Sep. 18th. We don't know what time.

Bridge cc what is "develop settings" fountain and target

Similar Messages

Maybe you are looking for