Bridge CC when copying resizes window to both monitors and enlarges all images to maximum size

Bridge CC when copying an image resizes window to both monitors and enlarges all images to maximum size.

Details, please.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the Mac, they are all locked. Help, please. Thanks

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the mac, they are all locked. Help, please!

"I plugged the external into the Mac and moved a folder of images onto the desktop. It looks like it went from read only to not locked. Is this possible?"
Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup.

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

I'm using 2 montiors and since few days ago, when I opem firefox browser it streches to both monitors, and if I minimize it to one monitor I see just half of the page. Where is the problem??

I'm using 2 montiors and when I opem firefox browser it streches to both monitors, and if I minimize it to one monitor I see just half of the page

here is print screen of the problem

I need a Badi that is triggered when saving Sales order in both Va01 and Va

Hi
I need a Badi that is triggered when saving Sales order in both Va01 and Va02
I tried with the following BADI's
BADI : BADI_SD_SALES
Implementation : /BEV1/SR_SALES_ORD_1
Method SAVE_DOCUMENT
Now when i want to put my peice of code in this (SAVE_DOCUMENT) method.
It is asking for Access key. Which i do not have.
Should i create a implementation and then create a method and then put my code there?
Anybody plz help.

You will probably not find a BADI to suit your needs. However if you look at include program MV45AFZZ you should find two subroutines: USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT. You can put the code you need directly into these subroutines. If these have not been changed yet on your system, you will need an access key to make these changes.
Please read the documentation in the header of the subroutines for furtner information on when they are called.
Best Regards,
Chris H.

IPhone no longer plays music through headphones or on speaker but will work when making a call on both headphones and speaker.

my phone will no longer play music through headphones or on speaker but will work when making a call on both headphones and speaker. Also when I plug in my iPhone to a jack that uses a power amp like external speakers it works fine. I have no idea whats going on i've restored it twice and still nothing.

did you update your phone?

Updated 2.3.3 for both x10i and x10a (ALL KITS)

Updated 2.3.3 for both x10i and x10a (ALL KITS)
http://www.topsony.com/forum/local_links.php?catid=4556
download FlashTool
http://forum.xda-developers.com/showthread.php?t=920746
or
http://androxyde.github.com/Flashtool/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Solved!
Go to Solution.

this is how to add more Internal Memory it's a long process but its worth it
1) backup everything (Check above)
2) backup your SD card
on your PC
1) open any folder -> click on tools -> properties -> view -> show hidden files
2) mount the SD card, go to your SD card, press Ctrl + A then Ctrl C, on your desktop create a new folder, open it, then press CTRL + V
now this is where it gets AWEOME-ER
Guide to using Link2SD on your Xperia smartphone
This guide may seem lengthy, but trust us when we say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.
1. PREPARATION
Please make sure you have completed all of the following before starting the tutorial.
On your PC:
– Install the necessary drivers for your Xperia smartphone onto your PC/laptop. The easiest way to do this is to ensure that Sony Ericsson PC Companion is installed on your PC. Once installed, connect your phone to complete the process.
– Download and install MiniTool Partition Wizard onto your PC or laptop.
On your Xperia:
– Enable USB de-bugging mode: Setting –> Applications –> Development –> Tick ‘USB debugging’
– Enable the ability to install unknown apps: Setting –> Applications –> Tick ‘Unknown sources’
– Install Link2SD from Android Market onto your Xperia smartphone. It is a free download.
2. ROOT
3. BACKUP MEMORY CARD
As we will be creating a partition on your microSD memory card, make sure you create a backup just in case anything goes wrong.
a) Create a new folder on your PC and name it anything you want, such as ‘SD_Backup’
b) Connect your phone to the PC, navigate to your memory card and copy the contents to the backup folder.
4. CREATE SECONDARY PARTITION
You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later. You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adaptor as the process below creates the partition whilst the phone is connected to your PC.
a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.
b) Click on the memory card under Disk 2 in MiniTool and then in the left pane, press ‘Move/Resize Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below we created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.
c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of MiniTool. Right click this new partition and then press ‘Create’.
If you see this pop-up below, just press ‘Yes’ to continue.
d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.
e) This should bring you back to the main MiniTool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.
This will bring up another pop-up window and will take several minutes to both resize and create the secondary partition.
If successful, you should see message below. Congratulations your card is ready to use in conjunction with Link2SD.
5. LINK2SD
This application makes it easy for users with root privileges on their phone to move applications to the SD card.
a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.
You will then see the Superuser Request, click ‘Allow’.
Once you see the following message, restart your phone. The app should now be ready to use.
b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In our case, you can see that the second partition has 1GB free.
c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
If you want to move all of your apps, pressing the menu button will bring up another menu allowing you to do this.
d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in red font in the Link2SD app list. Reboot your phone.
e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.
Special Thanx to the Xperiablog
http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/

When i browse OS X Server (Mountain Lion) Wiki through webdav i can't open any files and they all are 4kb in size?!

When i browse OS X Server (Mountain Lion) Wiki through webdav i can't open any files and they all are 4kb in size?!
Why is this ... is my configuration wrong in some way? I just put a tick mark in the

They seem to open fine from Numbers and Pages on the iPad.
This only happens on OS X macbook pro when i "Connect to server" from Finder.

HT204053 I am unable to sync all contacts on my iMac (which includes outlook for Mac contacts) with my iPad mini, how do I do this, I have enabled icloud on both devices and ticked all the boxes.

I am unable to sync all contact in my address book on my imac with my ipad mini, it looks like only icloud & yahoo contact sync leaving out the ones in outlook for mac. I have enabled icloud on both devices and ticked all the boxes.

Clive Owen wrote:
Thanks for that, but my Outlook contacts are synced to and all in my mac contacts book, does this not meen they would go to icloud,
No, they are in the On My Mac account in the Mac Contacts app, not iCloud.
or are they in a different format despite being in mac contacts? If so can the outlook contacts be exported in some other way to icloud?
Outlook is not compatible with iCloud, check Microsofts site if you need more verification.
If you want them in iCloud use Mac Contacts and move them from On My Mac to iCloud. This will remove them from Outlook.

I am a creative cloud member and just download the window in my mac and format all things that I had in mac. How can I redownload the creative cloud in the window portion?

I am a creative cloud member and just download the window in my mac and format all things that I had in mac. How can I redownload the creative cloud in the window portion?

WOrks no different - download the CC app and take it from there.
Mylenium

When I boot holding option, both Mac and Bootcamp partitions show up, but disappear after 2 seconds.

I recently swapped out my HDD for an SSD in my 2007 MBP. Hardware installed fine. I installed Mountain Lion from a time machine backup (of the same machine). I made the Windows partition in OSX, then installed Windows 7 on the partition it had made. In Windows, I updated Bootcamp to 3.3.
Everything seems to work fine in both OSX and Bootcamp from what I can tell. The problem is, when I boot and hold option to choose my boot drive, both drives appear and then disappear in about 2 seconds. They disappear with a "poof" animation, as if you had dragged an app off of the dock. If I'm fast enough, I can choose the boot drive before it disappears.
I tried once again reinstalling OSX from my last time machine backup (prior to the SSD swap), and the problem persists.
I thought it might have something to do with NTFS 3G and MacFuse, because I'd heard that they cause a bug where the bootcamp partition won't show up under the "startup disk" preferences pane. When I uninstalled said programs, bootcamp showed up under there startup disk options, but the problem persists.
Any ideas?

Actually, this is just getting weirder.
Disregard my edit above. Clicking once doesn't have any effect on the drives. But the drives disappear only coming off of a RESTART from OSX. If I Shut down fully, the problem is solved. Likewise, if the drives have disappeared after a restart and I am forced to turn off the computer by pressing the power button, upon boot up the drives no longer disappear (Regardless of any action I take).
It would seem that the drives are disappearing due to something during the restart process.
Okay: Here are some workflows that might shed light on the situation:
Boot to Mac -> Shut down -> Alt boot : DOES NOT DISAPPEAR
Boot to Mac -> Restart -> Alt boot: DISAPPEARS
Boot to Mac -> Shut Down -> Alt boot -> Boot to Windows -> Shutdown or restart -> Alt boot : DOES NOT DISAPPEAR
Boot to Mac -> Restart -> Alt boot & fast select -> Boot to Windows -> Shutdown or restart -> Alt boot: DISAPPEARS
Boot to Mac -> Restart -> Alt boot & disappears -> Turn power off -> alt boot: DOES NOT DISAPPEAR
So the core culprit is something to do with OSX restart. The method of shutdown during windows doesn't seem to matter.

DB Function errors out when trying to use in both Answers and RPD file.

Hi All,
Its a strange behaviour that one function which is in Database works fine the other does not. I have created 2 DB functions and accessing them from OBIEE in both Answers and RPD. One function which returns a Date is working fine, the one which is returning a number is throwing a error.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S0022 code: 904 message: [Oracle][ODBC][Ora]ORA-00904: "APPS"."XXX_BUSINESS_DAYS": invalid identifier. [nQSError: 16001] ODBC error state: S0022 code: 904 message: [Oracle][ODBC][Ora]ORA-00904: "APPS"."XXX_BUSINESS_DAYS": invalid identifier. [nQSError: 16015] SQL statement execution failed. (HY000)
SQL Issued: SELECT "Soft cost Fact".Project saw_0, "Soft cost Fact"."Fiscal Year" saw_1, "Soft cost Fact".XXX_BUSINESS_DATE saw_2, CASE WHEN EVALUATE('APPS.XXX_BUSINESS_DAYS(%1,%2,%3)',"Soft cost Fact"."Soft Cost Date","Soft cost Fact"."Soft Cost Date",1) =0 THEN 'ZERO' ELSE 'NON-ZERO' END saw_3 FROM "Soft Cost" WHERE "Soft cost Fact".Project = '060096' ORDER BY saw_0, saw_1, saw_2, saw_3
Both functions are in same schema, have the similar grants.
Please help me resolving this error. Any pointers in resolving this is much appreciated.
Thanks,
Vijay

I noticed that you have not specified the type of return value that the function returns. It is good practice to do so..
EVALUATE('DB_Function(%1)' as returntype, {Comma separated Expression}).
Try EVALUATE('APPS.XXX_BUSINESS_DAYS(%1,%2,%3)' as number,"Soft cost Fact"."Soft Cost Date","Soft cost Fact"."Soft Cost Date",1) to see if that resolves the error.
Also check this out if you haven't already.
http://obiee101.blogspot.com/2007/12/evaluate-function-and-presentation.html
Hope this helps.Thanks.

When will Smartview support display both aliases and members?

In the Essbase classic add-in, users had the ability to display both aliases and member names. When using Smartview with Essbase, this isn't supported. Are there plans to add this back? Thanks.

I heard this is the most requested parity feature of the addin, that Oracle may be doing this sometime in 2010 since it is a complicated fix.

Bridge CC when copying resizes window to both monitors and enlarges all images to maximum size

Similar Messages

Maybe you are looking for