Bridge crashes with .thm files (no questions just info to share)

Just a heads up. Bridge 2.1.1.9 began crashing after I upgraded the firmware on my Canon d60. I shoot in raw and was just dragging the entire folder file onto my desktop to view the images in the folder.
I found that if I trashed the .thm extension files (which I don't need anyway)then Bridge allows me to view the files in the folder. If I don't, it crashes.

I'm actually experiencing the same problem with my Bridge CS3. The files are already transfered from my camera and are in their own folder. I just checked, and I the same files are viewable in Bridge CS2; but I kind of hate to use CS2 just because of that one stupid folder.
Not to start a whole RAW vs. JPEG debate, but I'm seriously considering saying the heck with this little RAW experiment I've been trying lately if this keeps up.

Similar Messages

CS6 bridge crashes trying open files

bridge opens up fine, I can browse around & preview images without any trouble…
Whenever I double-click or right-click on an image whether it be a raster image or a vector image, bridge crashes and the file never opens in Photoshop or Illustrator…
Any Thoughts?

Fast forward a bit to September 2012 and I'm experiencing the same problem of Adobe Bridge CS6 crashing like a mofo. I'd love it if anyone could brighten my life with some sollutions.
I'm using: Bridge CS6. Fully updated. Running on Windows7 32bit which is fully updated. Updated graphics card. In short, EVERYTHING on my pc is updated and runs great except bridge. Gaming PC with 4gb RAM and a sweet graphics card.
Bridge loads fine and looks okay UNTIL i open a file. The second i click Open, bridge crashes.
Bridge also crashes if i double click a folder which has a photo in it. Never fails to crash. The error is typical nonsense:
"Adobe Bridge CS6 has stopped working. Windows is checking for a sollution to the problem." followd by "A problem has caused the program to stop working corectly. Windows will close the program and notify you if a sollution is available." "Close Program."
Curt Y advised the previous member to open View Event Logs, and look for errors/warnings. Specifically in Applications an area called Faulting Module. Well I can't find anything called "fault". I opened Event Viewer, the four options are "custom views", "windows logs", "applications and services logs", and "subscriptions". Clicking the down arrow on each of them brings up sub areas, none called fault.
Under Windows Logs and Application, there are a lot of errors listed involving Bridge CS6. This is what the information and error log says:
Faulting application name: Bridge.exe, version: 5.0.1.21, time stamp: 0x50226927
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0012f890
Faulting process id: 0x1d2c
Faulting application start time: 0x01cd950fcaf80e21
Faulting application path: C:\Program Files\Adobe\Adobe Bridge CS6\Bridge.exe
Faulting module path: unknown
Report Id: 0ce45e17-0103-11e2-a779-005056c00008
Fault bucket 3257880259, type 5
Event Name: BEX
Response: Not available
Cab Id: 0
Problem signature:
P1: Bridge.exe
P2: 5.0.1.21
P3: 50226927
P4: StackHash_0a9e
P5: 0.0.0.0
P6: 00000000
P7: 0012f890
P8: c0000005
P9: 00000008
P10:
Attached files:
C:\Users\Ken Martin\AppData\Local\Temp\WER69DB.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Ken Martin\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Bridge.exe_753dbd4af221 56de353069e5b15d4515b6721d_18e2600c
Analysis symbol:
Rechecking for solution: 0
Report Id: 0ce45e17-0103-11e2-a779-005056c00008
Report Status: 0"
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-09-17T20:05:39.000000000Z
EventRecordID
79464
Channel
Application
Computer
nobody
Security
EventData
Bridge.exe
5.0.1.21
50226927
unknown
0.0.0.0
00000000
c0000005
0012f890
1d2c
01cd950fcaf80e21
C:\Program Files\Adobe\Adobe Bridge CS6\Bridge.exe
unknown
0ce45e17-0103-11e2-a779-005056c00008

CMS crash with core files and multiple report output generation

Happy new year to everyone,
Our BOXIR3.1SP6FP2 env has recently started behaving weirdly by triggering multiple output to users inbox and email notification out of scheduled reports. Also we have noticed the CMS crash with core file (almost 4GB) generation at the time of multiple report output.
Most of the times, CMC crashes and recycles itself. At few times, CMS services alone went shut down.
OS details: RHEL 5.5, 32 GB RAM, 8 core processor on each of the clustered node, Oracle 10GR2.4 CMS DB server, 11GR2.4 oracle reporting DB server and oracle 11.1.0.6 client.
2015/01/21 23:54:37.946|>=| | |28123|1534131088|{|||||||||||||||DBQueue::Read
2015/01/21 23:54:37.946|==| | |28123|1496185744|
|||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID
IN (1004050) ORDER BY ObjectID
2015/01/21 23:54:37.946|==| | |28123|1496185744| ||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:37.965|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 50293
2015/01/21 23:54:37.966|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString Unknown exception in database thread
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 33007
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString CMS is unstable and will shut down immediately. Reason: %1...
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID IN (1009213) ORDER BY ObjectID
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:38.512|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:549) SUNIXDaemon::run: server restart flag is 1..
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:552) SUNIXDaemon::run: in abort ...
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:555) SUNIXDaemon::run: doing the WithAbort case ...
2015/01/21 23:54:38.520|==| | |28123|1496185744| |||||||||||||||(dbq.cpp:1357) DBQ: Time required to read 1 objects: 20.000000 ms
Thank you,
Karthik

Hi Denis,
I'm trying my best for the last few weeks to understand the core issue along with SAP however it is still a mystery.
>Ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 270335
max locked memory       (kbytes, -l) 32
max memory size         (kbytes, -m) unlimited
open files                      (-n) 1024
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 10240
cpu time               (seconds, -t) unlimited
max user processes              (-u) 270335
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
Below is the observation as part of troubleshooting:
1. CMS breaks at threshold of 3.9 G.
2. CMS DB sits in a different Linux server than BOE server.
3. All core files were generated by boe_cmsd process and are almost 4GB in size (same as max threshold which it breaks).
4. Shell script which I've added in the BOE servers shows that the CMS DB is available/connecting at the time of CMS crash.
5. SAP analysed the Core files and skeptical about the below lines.
     #3 0x58687b80 in skgesigCrash ()
      from /opt/oracle/product/11.1.0/client_1/lib32/libclntsh.so
     #4 0x58687e0d in skgesig_sigactionHandler ()
I'll continue troubleshooting with a hope to fix it at the earliest.
Thanks,
Karthik

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

Bridge crashes with camera raw 4.4.1 installed, OK with 4.0

When I use Bridge with camera raw plugin 4.4.1 installed to navigate to a folder with at least one raw image shot with Sony Alpha 100, it consistently crashes. I can open the same image using Photoshop and Camera raw without a problem, so the image is not corrupted. Bridge works as expected with raw files from Sony Alpha 700.
If I revert to camera raw plugin 4.0 it works like a charm for Sony Alpha 100 pics, but my new Sony Alpha 700 is not supported.
I have tried using a clean user account, with no caches at all so that can not be the problem. I'm on a MacBook Pro with OS 10.5.3 and CS3.
Here is an excerpt from the crash log, showing that it is indeed the camera raw plugin causing the trouble:
Process: Bridge CS3 [802]
Path: /Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/Bridge CS3
Identifier: com.adobe.bridge2
Version: 2.1.1.9 (2.1.1.9)
Code Type: X86 (Native)
Parent Process: launchd [604]
Date/Time: 2008-06-26 08:35:41.310 +0200
OS Version: Mac OS X 10.5.3 (9D34)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
Crashed Thread: 10
Thread 10 Crashed:
b 0 com.adobe.CameraRaw 0x19849da3 0x196a6000 + 1719715
1 com.adobe.CameraRaw 0x1984a976 0x196a6000 + 1722742
2 com.adobe.CameraRaw 0x1984b775 0x196a6000 + 1726325
3 com.adobe.CameraRaw 0x1984cefc 0x196a6000 + 1732348
4 com.adobe.CameraRaw 0x19982638 EntryFM + 965714
5 com.adobe.CameraRaw 0x1978dd45 0x196a6000 + 949573
6 com.adobe.CameraRaw 0x196ed798 0x196a6000 + 292760
7 com.adobe.CameraRaw 0x1978e63b 0x196a6000 + 951867
8 com.adobe.CameraRaw 0x196eec2b 0x196a6000 + 298027
9 com.adobe.CameraRaw 0x19733a15 0x196a6000 + 580117
10 com.adobe.CameraRaw 0x19926a19 EntryFM + 589875
11 com.adobe.CameraRaw 0x19927271 EntryFM + 592011
12 com.adobe.CameraRaw 0x19921b15 EntryFM + 569647
13 com.adobe.CameraRaw 0x1979c1fb 0x196a6000 + 1008123
14 com.adobe.CameraRaw 0x198df7bd EntryFM + 298455
15 com.adobe.CameraRaw 0x198e1c37 EntryFM + 307793
16 com.adobe.bridge2 0x00420a35 ThumbMetaLib::CameraRawFormat::ReadDraftThumbnail(ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 243
17 com.adobe.bridge2 0x003fc2d9 ThumbMetaLib::FBFormatReader::ReadDraft(ThumbMetaLib::FBFileFormat*, ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 89
18 com.adobe.bridge2 0x003f3d61 ThumbMetaLib::MakeDraftFromFile(ThumbMetaLib::FBFileFormat*, ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 207
19 com.adobe.bridge2 0x0051962e vio_timeout + 78060
20 com.adobe.bridge2 0x005e3470 vio_timeout + 905006
21 com.adobe.bridge2 0x005e8ebf vio_timeout + 928125
22 com.adobe.bridge2 0x00523699 vio_timeout + 119127
23 com.adobe.bridge2 0x003c5704 Mondo::CThread::EntryProc() + 18
24 ...ple.CoreServices.CarbonCore 0x9424955b PrivateMPEntryPoint + 56
25 libSystem.B.dylib 0x970036f5 _pthread_start + 321
26 libSystem.B.dylib 0x970035b2 thread_start + 34
Any ideas to resolve this is greatly appreciated!
Torbjørn

I'm still looking for some help.
Now that I've learned a little bit more, let me try to restate my problem. In using both a Nikon D200 and a new Nikon D300. For software I'm using PS CS3 Extended Edition, as a part of Adobe's CS3 Design Premium suite. My Dell Inspiron 530 is running Vista Home Premium.
As I've said before, my problem is that I cannot open NEF files shot with either the D200 or D300 (and they are uncompressed NEF files). I downloaded the new Camera Raw plug-in, ver. 4.3.1, and unzipped it to \program files\common files\adobe\plug-in\CS3\file format. The Camera Raw.8bi file is dated 11/30/07 and is about 10,446,000 in size. Then I run a search of my hard drive to make sure there are no other Camera Raw files anywhere. Then, in PS Bridge, I purge the cache of the file folder where the NEF files are located. Then I try to open a NEF file and get the following error message in a PS CS3 Extended box:
"Could not complete your request because it is not the right kind of document."
Then, immediately afterwards I ran another search of my hard drive, and the Camera Raw.8bi file is GONE, DISAPPEARED, VANISHED.
Is the problem with the CS3 Entended Edition?
Can anyone help me out here, particularly you Nikon shooters?
Thanks for any advice.
Bob

Adobe MEdia Encoder Crashes with big files inputed

Hello,
There isn't a forum for the Adobe Media Encoder, so I thought this would be a good spot. I am an after effects and Premiere user who likes the idea Adobe seems to have of using the media encoder to cover all my encoding needs.
My typical workflow, especially since these days I'm doing more shorter form animations, is to render out to a Quicktime Animation codec file as my main archive file. From there, output all the various different web versions, flv, etc from that core archive file. Since my projects usually aren't running more than 5 minutes, this leaves me with a nice 3 - 7gig file.
Problem: I'm running CS4 and the media encoder crashes when I input files that are in this file size range. The program locks up when I push start que, and then eventually crashes. Works fine with smaller size files that are about under a gig.
I can run a render out of after effects, which seems to be more stable. But I'd love to be able to use this great new tool.
Here's my machine specs if it helps:
PC
Intel Quad Core Q9550 @ 2.83 ghz
4gB RAM
Windows Vista 64 bit ultimate
All updates current for CS4 apps as of 01/30/08
Running Adobe Media Encoder V 4.01.078
Hard drives are nothing special. 7200 rpm western digital internal and external. I've tried all sorts of hard drive configurations, where the input is coming from, where it's going, etc. No difference.
I have been experimenting with using Lossless AVI's as my "uncompressed" archive file. Works well, but same crashing with the Media Encoder.
Also tried experimenting with frame size alterations during encoding, no difference there. Also, whatever the output codec is, be it FLV, H264, etc. no difference.
Anyone have any thoughts or have experienced similar issues? I hope all my MAC friends aren't right, seems like all my attempts to streamline my workflow with this CS4 and beefy PC combo are crashing and burning.
Anyone else feeling this pain, or have recommendations?
Thanks,

Thomas, thanks for your suggestions on Vista optimization. That Sheer Codec looks nice, but hard justify the cost when I've been working for years with essentially uncompressed codecs that work well. Will play more though to see if the cost would actually pay off in the long run though.
In general I made a decision that it was too early to throw in the towel on my old uncompressed codecs. The Quicktime animation codec has always been for me the safest, most universally accepted, and most reliable "uncompressed" codec. It's always worked in the past, not gonna give up just cuz media Encoder CS4 has troubles.
Mylenium, thanks for the reminder about the silly platform wars. I've always felt the same as you, but when I'm stressing sometimes the silly propaganda can get to me. Makes me forget that no matter what system ya got, it never works perfect!
Here's an update. I have trying my best to learn more about the bug and have come to some interesting realizations. The AME does work with larger files, just not the larger files that I had been using at the current moment. Older files of mine as big as 20GB can be inputed into AME with fine results.
This being said, it scratches out most of the RAM overload thoughts with AME.
The difference with my current files that were causing AME crashes: larger than a few GB, came from AE, had the 1.21 pixel aspect ratio metadata.
When I re-interpreted the file in AE into a square pixel aspect ratio, exported it, it was then successfully inputed into AME.
I have read just now that there were changes in After Effects widescreen pixel aspect ratio interpretation in CS4. Can this change be causing problems in my AME. Not positive, but I'm now thinking after many days of testing that the bug could have its roots somewhere in this ball park.
If anyone from Adobe is reading this, I would love any ideas you might have on this issue. In general, there is really no support for the Adobe Media Encoder itself. This is not good, considering how it is so necessary for AE and Premiere users like myself.
Thanks,

Bridge bug with .ste files?

I have been having a problem recently, with Bridge crashing. The issue has started in the past few weeks, after I downloaded some Adobe updates. I have updated my video drivers and done everything else I can think of but I continued to have the problem.
Any suggestions?

Bug, not likely, but contaminated file, perhaps. If the crash happens with one folder, then purge the folder and let it rebuilt. Also, compact cache to get rid of orphans and reduce cache size.
A crash can be more likely if you change folders before the cache is finished building (spinning arrow on bottom).
Other options, defrag the hard dirve, purge all cache, reset preferences if none of this works.

How do I deal with .thm files and iMovie?

I've been using my digital camera to take short movies. When I download them onto my computer they show up as a file with a name like: MOV02161.MOV and another with an identical name but the extension .THM. When I double-click on the .mov file it opens in Quicktime and plays back no problem. When I import the .mov file into iMovie it plays without sound. I've noticed that the .thm file seems to be crucial to whether there is sound or not (I tried trashing one but then the Quicktime video played without sound!) but I can't import the .thm files into iMovie. Do I have to convert them to some other format? How do I do that?

kstp,
the .thm file is simply a jpeg thumbnail version of your movie which you could probably view by changing the name from .thm to .jpeg (not entirely sure about that). Your audio problem is more likely caused by iMovie not having the codec needed to play the audio format encoded into your mov container. Maybe someone here more familiar with iMovie can tell you what audio formats work within iMovie, and you can set that in your camera to prevent this problem.
Now, worst case scenario is that you'll probably have to extract the audio and convert it to something that works in iMovie. You can extract the audio from within iMovie from the advanced options menu. You can also use a free app called FFMpegX to extract and convert it to something else. Hopefully though, someone here will have a more convenient solution for you.

Adobe bridge crashing with the mountain lion upgrade

every time I open a folder in bridge it crashes. anyone?

Have you made your user Library-folder visible in Finder?
I did that in the Terminal and shortly after that the crashes started for me.
I just updated to 10.8.2 and that made the user Library-folder invisible again.
At the same time Bridge started behaving properly.
Not saying that's anything other than a coincidence.

Adobe bridge crashs with Mountain lion

since upgrading to Mountain Lion adobe bridge 5.0 crashes! HELP!

Have you made your user Library-folder visible in Finder?
I did that in the Terminal and shortly after that the crashes started for me.
I just updated to 10.8.2 and that made the user Library-folder invisible again.
At the same time Bridge started behaving properly.
Not saying that's anything other than a coincidence.

CS4 (PS 11) constant crashes with larger files -

I am encountering persistent program crashes with Photoshop 11 (CS4) when I have multiple layers (four or more) and the file size exceeds 75 mb. The error message that Photoshop has encountered a problem and is closing appears without further details. When I reopen PS, I then get the message about "Photoshop encountering a problem with the display driver and disabled GPU enhancement" despite the fact that I previously unchecked enable OpenGL drawing in the preferences-performance tab. It is blank on that tab after "Detected Video Card" whereas in CS3, it correctly notes the following video card. My video card is nVidia GeForce 7600 GT with the latest driver dated 10/07/08.I have 4 GB of RAM, however in the performance tab of preferences it notes 1.633 GB AM available and Photoshop using 960 mb. I also have CS3 (PS10) and do not encounter the same problem. The OS is Vista.

Please search the various threads in this forum pertaining to OpenGL issues. Updating to the latest driver 178.24 is inevitable. Also check for the "Old GPU" enabling registry hack. The prefs only get saved on program exit, so it's natural the old options are in place after a crash. Disable OpenGL, exit the program, relaunch it and only then start working with it.
Mylenium

Adobe Premiere CS6 'Create new Trimmed Project' Crash with .MXF files

Yesterday I started to back up all our students work, and found that the "Create New Trimmed Project" no longer works in CS6 with .MFX files.
Adobe Premiere CS6.0.3, crashes when I try to "Create New Trimmed Project" under "Project Manager"
This only happens when there are .MXF files in the Sequence.
As we use Panasonic P2 cameras at this university, this is a problem, as this is the format that they shoot in.
As a test I have made a Project with only one .MXF file placed on the sequence, and it crashes.
This happens on my Macs and Windows machines with Adobe Premiere CS6 .
Adobe Premiere CS5.5 works fine, and does not crash.
Unfortunately I cant save a CS6 project as a CS5.5
If you don't have any .MXF files to test this,
You can make your own .MXF files by exporting any video file as "MXF OP1a" or "P2 Movie" Format, (the Preset setting is irrelevant - any preset will cause it)
P.S.
Using "Collect files and Copy to new Location" under "Project Manager" works fine, but does not reduce project size as much.

I also discovered this behavior last summer. Unfortunately the best (lame) answer I could find was that "Some formats, such as Long GOP based media files, cannot trim media, or add handles." Source: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7c72a .html
That's not very specific, but in my case at least (and it sounds like in your case, too) .MXF may be another file type that cannot be trimmed. If I remember correctly, the answers I got from others was that they were able to export fine. My machine (and maybe yours) has an issue that nobody else seems to have encountered. So none of the prescribed remedies allowed me to move forward in this regard.
After much searching, asking and several suggestions from various Premiere communities, I gave up and moved on.
Use Remove Unused and then Collect Files and Copy to New Location. At least that can help you if you have a lot of clips. In my case, it didn't help much, because my very short clips were edited from very long takes, so as Premiere sees it, not much was "unused".
Be aware that "Project Manager does not copy and collect After Effects compositions that are dynamically linked to an Adobe Premiere Pro project. Project Manager does save the Dynamic Link clip in the trimmed project as an offline clip, however."
Wish I could offer you more.

InDesign CS5 crashes with every file. Is anybody out there?

Hello. Can someone help me with this? I have a magazine to do, i didn't sleep for the past two days and today suddenly when i was setting up the file to send it, indesign crashes, first only that file, now all of them. It opens the recovery files always no matter what. But then crashes. Please any help would be appreciated! So much to be done.. I've read posts on this matter but nothing i do seems to work. The Sing stuff, Mark II, preferences, library.. unnistall, install.. i even moved one file to open with a windows computer and indesign also crashed, last version.
I need somebody. Please help. Thanks in advance
http://pastebin.com/aC0Y5L4z
Peter Paxx

2. Feb 6, 2012 11:19 PM (in response to mckayk_777)
3. Feb 6, 2012 11:25 PM (in response to Peter Paxx)
bump!
Bump after 6 minutes? Geeze! That's a bit excessive.
You're running:
Version: 7.0.0.355 (7000)
Upgrade to 7.0.4.553 and come back, reposting the crash report if you still have one.
There are a huge number of fixes in 7.0.3, and also some in 7.0.4, which you need.
Your crash is clearly related to preflight. If you get another crash with preflight turned off, please post that.

Crashes with .svg files

''dupe of https://support.mozilla.org/en-US/questions/934086''
* https://upload.wikimedia.org/wikipedia/commons/archive/b/bd/20120719043656%21Test.svg
* https://upload.wikimedia.org/wikipedia/de/0/00/Erzbistum_K%C3%B6ln_Logo.svg

Yes, the SVG is a vector format which is XML-based; AI is supposed to be able to open and save 'em...Adobe claims to be very supportive of the format.
This is my first exposure to these files, and I can't get (at least this set of) files to work as advertised.
I'll post more later in the week after I get to speak with the file vendor.
Thanks for your interst...
David

LR4 crashes with video files

LR4 crashes when I try to go to loop view with video file (MOV). Message "Load library failed with error 998". Lates version of LR4 win7 64 bit.

Hello,
Can you try following the steps on the TechNote below?
Inserting a Windows Media Player in a web page:
http://www.macromedia.com/go/tn_15777
HTH.

Bridge crashes with .thm files (no questions just info to share)

Similar Messages

Maybe you are looking for