Bridge CS3- Labels & Ratings disappear after processed in Noiseware (was okay in Bridge CS)

Okay, I guess I should count my blessings that this is about the only annoying, recurring problem I've had with Bridge CS3, unlike the crashes that others are dealing with.
Windows XP w/ core 2 6600 2.4GHZ, 3GB ram. A large percentage of my 300GB hard drive is used but that was the case when I used to run Bridge CS. Software- Adobe CS3 Web Suite
Whenever I run a file through Noiseware (Stand alone version) I lose all labels and ratings. This did not happen with Bridge CS version. Anyone experiencing the same? I am always referring back to my ratings and labels so it's a major problem to lose them. Only thing I can do for now is save it with a new file name and then re-rate & label the newly processed file to match the original, but when you are dealing with dozens, if not 100's of files, 2 extra steps is a lot of wasted time!
Thanks in advance for any input.

Thanks curt. I had that problem way back when I first upgraded and it had something to do with renaming files. I fixed that but I still cannot fix this conflict with noiseware software. It blows...to lose all my labels & ratings everytime I have to use the noiseware.
I wish ADOBE would help!?!?!? Where are you guys? Seems like once you purchase the software, we're just on our own!

Similar Messages

Many of my ratings disappeared after upgrade

I recently upgraded to the latest version of iTunes for Windows and many of my ratings disappeared. There is no detectable pattern to which ones are gone, but more than half of them are no longer there. I'm running version 5.0.1.4
Anyone have any explanation?

Thanks for your advice. I did refresh my iPod.
However, I wanted to share some additional peculiar behavior. I have started going through my 1500+ songs that have to be re-rated and I am seeing really strange stuff. While rating one song, the previous rating will suddenly reappear on the song below the one I am listening to. Or, occasionally, the rating reappears on its own as I begin to listen to a song with a disappeared rating. This makes me wonder if the ratings have actually disappeared, or if some glitch is keeping them from showing. Any ideas?

Star Ratings disappear after ACR and saved as jpegs

I apologize in advance if this topic has come up before and I've somehow missed it. I've recently experienced an anomaly regarding the star ratings that I apply to our RAW files in Bridge CS3. Generally we'll star the RAW files while the client is still on the set to get their favorite picks. We then will batch process all of the files and save as HiRez jpegs. The client's picks then go into a "Favorites" folder and the rest into one we call "More" just in case the client finds that their picks don't jive as well as they thought they would in their layout. So, that being said, recently we've had two occasions where "some" of the ratings didn't make it through to the processed files. We're running both a G4 with Tiger and a G5 with Leopard. Both systems have the latest updates. The most recent occurrence happened on the G4, and I believe the other time it was on the G5, though I can't be totally certain. We use both machines to batch process the images.
Any help or insight would be extremely appreciated!

It could be possible that the cache had no time to rebuild, have you tried to purge the cache for folder using the tools menu. Also whenever something is behaving other then before in Bridge you should also try to refresh the preferences with holding down option key when restarting Bridge. After this don't forget to reset the prefs to your wishes.

Help - index page has disappeared after removing code that was recommended regarding Flash

After inserting some conditional comments regarding earlier versions of IE not displaying bulleted lists properly. I received a message about Javascript code that should be removed regarding my Flash element.
When I removed the code that was indicated, my index page changed to a gray screen that had some copy about needing to update the Flash player, so I thought I'd totally take out the code relating to the Flash element and I would reinsert the Flash movie. However when I preview it everything is gone except a gray background. In Live View the original page is there. When I try to look at in in design view preview or view it in a IE browser it is just a gray background.
I'm attaching the code for the page to see if I accidently removed some element that needed to be in to display the page. Please advise ASAP. Thank you.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Total Care Nursing Services</title>
<link href="css/twoColFixRtHdr.css" rel="stylesheet" type="text/css" />

<style type="text/css">

</style>
<link href="css/global.css" rel="stylesheet" type="text/css" /><style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixRtHdr">
<a href="tcns_members.html"></a>
<div id="container">
<div class="twoColFixRtHdr" id="header">

<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="index.html">Home</a>    </li>
<li><a href="about_us.html">About Us</a></li>
<li><a href="staffing.html">Staffing Services</a>    </li>
<li><a href="join_us.html">Join Us</a></li>
<li><a href="contact_us.html">Contact Us</a></li>
<li><a href="nursing_news.html">Nursing News</a></li>
<li><a href="tcns_members.html">TCNS Members</a></li>
</ul>
</div>
<div class="twoColFixRtHdr" id="sidebar1">
    <h3 class="sidebarTitle"><span class="sidebarTitle">TCNS MEDICAL PROFESSIONALS</span></h3>
    <ul>
      <li class="spacedList">Registered Nurses</li>
      <li class="spacedList">Licensed Practical Nurses</li>
      <li class="spacedList">Certified Nursing Assistants</li>
      <li class="spacedList">Radiological Technicians</li>
      <li class="spacedList">Physical Therapists</li>
      <li class="spacedList">Respiratory Therapists</li>
      <li class="spacedList">Home Health Assistants</li>
    </ul>
<p class="sidebarCopy">Interested in a career at TCNS? <a href="contact_us.html">Contact us</a> to learn more today!</p>
    <p class="sidebarCopy">Are you a facility looking for health care staffing in South Florida? <a href="staffing.html">Click here</a>.</p>
</div>
<div id="mainContent">
    <h1>
Offering Compassionate Care with a Committment to Excellence</h1>
    <p><span class="company">
    </span><span class="company">TOTAL CARE NURSING SERVICES</span> was founded as a bridge between health care professionals and the many institutions in the health-care industry, with the primary objective of promoting the patient’s well being and satisfaction.</p>
<p>With a nationwide nurse shortage approaching 800,000 and projected to worsen as the baby boomer generation enters retirement age, the need for skilled nurses and other health care professionals is rapidly increasing. However, the greater challenge for health care facilities is to recruit and retain motivated, dedicated professionals who will help deliver the quality care that is demanded of them by every aspect of the industry. <span class="company">TOTAL CARE NURSING SERVICES</span> has the vision to answer this challenge and provide the needed personnel to its clients at reasonable cost.

</p>
</div>
<br class="clearfloat" />
<div id="footer">
    <p><span class="spaceFooter"><a href="index.html">Home</a></span>l <span class="spaceFooter"><a href="mailto:[email protected]">E-Mail</a></span>l <span class="spaceFooter"><a href="links.html">Links</a></span>l <span class="spaceFooter"><a href="search.html">Search</a></span><br />
      Copyright 2009 - Total Care Nursing Services, LLC

    </p>
</div>

</div>
</body>
</html>

2.
Deleting and getting the file should solve this problem.
3.
You should only require 2 IE conditional statement (for css code), one for less than IE 8 and one for less than IE 7.
Both or just one of these should be inside the <head> </head> tags not anywhere else.
The conditional statment in flash are for <object> code.
Here is an example of how the flash code should look for your webpage:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="250" height="204" id="FlashID" title="name of your swf file here without .swf">
        <param name="movie" value="link to your swf file here" />
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="8.0.35.0" />
        
        <param name="expressinstall" value="../Scripts/expressInstall.swf" />
        
        
        <object type="application/x-shockwave-flash" data="link to your swf file here" width="250" height="204">
          
          <param name="quality" value="high" />
          <param name="wmode" value="opaque" />
          <param name="swfversion" value="8.0.35.0" />
          <param name="expressinstall" value="../Scripts/expressInstall.swf" />
          
          <div>
            <h4>Content on this page requires a newer version of Adobe Flash
              Player.</h4>
            <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p>
          </div>
          
        </object>
        
      </object>
The width and height values to be changed to what you require.
NO other code is required.
PZ

My labels have disappeared from every pic in my iPhoto library after upgrade to work with yosemite

MMy labels have disappeared from every picture in my iPhoto library after upgrading to work with Yosemite.

I didn't do anything to the LaCie when I got it.
Then that's likely the issue.
Select the drive on the Desktop and go File -> Get Info. You can find out the format in that window:

After processing in CS6 saved jpegs are washed out in when viewing in bridge - Why?

after processing in CS6 saved jpegs are washed out in when viewing in bridge - Why?

I have been trying to figure out if I made any accidental changes in Photoshop. So far I haven't found anything. That might simply mean that I don't know all of the places to look. I have called Adobe and been on the support websites and haven't gotten a clear answer. I save as a JPEG with an embedded color file sRGB. Any suggestions on where else to look for accidental changes?
Everyone seems to agree that iPhoto doesn't work well with Adobe and should be avoided in the workflow. Truly, I had no idea! I just like the simplicity. The Mac store never mentioned problems between the two but did offer to help me purchase Aperture. I will use Bridge from now on to view the images and manage folders.
Thanks for your message!

Java- Win32 dll- process, process disappears after sometime.

Hi there,
I have a Win32 dll component that invoke a process. When I use it with my Win32 client it works fine, but when i load that component with my java application (using System.load()) and use it with JNI the process disappears after some time.
- Is it possible that the process disappeared due to some memory optimizations made by JVM?
- Does JVM handles or have access to some process created_by/within that dll?
Thanks in advance.

Hi,
I don't know why it is disappearing, but what i know is:
1):- System.load() only 'loads' the required libraries. JVM can use only those libraries that are registered with JVM using System.load().
Secondly when you writes a code in class initializer as
static{
System.load( file );
It registers the library with your JVM as well as this class. Now any method called by this class will be passed to this dll.
Sometimes you might have seen a dump of HotSpot. It shows libraries that are sticked with JVM. Otherwise there are tens of other dlls loaded in the system.
So the System.load() only registers the dll to serve you on demand.
2):- JVM optimizes only it's own memory. What dlls or other native code is doing, is not handled by JVM.
3):- Similarly JVM deals only with it's own processes. The JVM has no concern with the processes started and managed by dlls.
If there could be a method to handle processes (like pausing it, resuming it, or stoping it etc.) then Thread.stop() might not was deprecated. :)
Regards,

Start-up problem disappears after several months non-use? Real?

Old Satellite laptop suddenly would not complete start-up when turned on ---- this was more than 18 months ago. So I stopped using it, charged the battery and left it for 18 months. NO usage for 18 months; maybe the battery drained during this time, maybe not.
When I then took laptop to a diagnostic technicianafter those months of non-use, the computer started-up with NO PROBLEM. (I actually do not remember if I recharged the battery just before taking to the diagnostic servicer or not).
Was the nonusage for several months and battery drainage meaninful or not? Would this be just a temporary unknowable problem which disappeared? Since starting the computer several times to try, the computer still starts normally and the only problem I can observe is a stress in the CD drive upon trying to use certain CD's; otherwise, the computer still seems to be working normally, and shows no trouble in start-up.
I do not understand.

Dbrown and others interested,
Here are the basic details:
Laptop Satellite 1415-s115, purchased new in year 2003, Windows XP Home Ed., S.P. 1.
In use a few times per month for about 2 to 2 and a half years. Used for dial-up internet, transferring and copying files, putting onto CD's, and some use for software development. Then, almost daily use from 2006 to mid 2008 for wireless internet use and sometimes transferring and storing files, putting files onto CD.
Suddenly in late spring, 2008 Start-Up would not finish when I turned on computer. After each and every attempt, 15, 20, more minutes, startup was still not finished. In this process, the computer was useless.
Retail technician began an initial try to startup in the retail shop and gave, after various aimless discussions, that testing would take a few hours to do thoroughly and the cost for diagnosis would be ~140 dollars - before any repair attempt. So, at that, the computer was still useless, and our decision was to just store the apparantly dead computer at home, and buy a new laptop computer.
Early summer 2008 through late autumn 2009, I used the new laptop computer, now at Windows Vista on a different model Satellite laptop.
A day in late autumn 2009 --- Let me find what an authorized Toshiba service technician can tell me from his diagnosis! I explained the problem to him. After a couple of minutes, he showed me the old laptop was fully started-up, showing no problem. He said "play around with it a little"; so I did play around with it a little and found no problem. Then, remembering the difficulty from 18 months earlier, I said, do a diagnosis to be sure. He ran tests overnight for several hours. I then was able to pick up my old laptop the next day and he found NO problem during the diagnostic tests. He turned on the computer again and let me play around with some of the programs to see for myself.
Since bringing the old laptop back from the authorized toshiba technician, NO REPAIR NEEDED, I have started it up about two or three times per week and have done a few things and find NO problem with startup and nearly no problem with anything...... just one difficulty with the optical disc CD drive when I put in certain CD's; either something about the paper labels which I used, or something about a CD-R being recorded as "Open" instead of "Closed", ... I'm not yet sure. Those certain CD's seem to suddenly cause a motor noise and the machine becomes extrreeeeeeeemmely slow responding --- only with certain CD's, since most do not seem to cause this particular problem. (These same certain CD's seem to cause some difficulties when I try to read them in another old, desktop machine).
(In case readers in this thread are interested, just two days ago, I updated to XP S.P. 3 on the old laptop)
Well, so tell me what you can think is most meaningful

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.

A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium

Object disappears after pressing enter key

I need to attach the transaction J1B3N to keep the connection objects.
Perform the steps as the help of SAP:
Object links to other SAP objects
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130.
Create function module OBJECT_CHECK_XXXX (XXXX = object name)
If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
After performing these steps can see the screen with the number of document tab Link Object, but I am having the following problem: I inform the document number field and press Enter this number some of the screen.
Already remade several times but can not find the point I'm failing.
Thank you,

Hi Michely,
could you please check if the necessary object is correctly mainatined in structure MCDOKOB too. Here the following coding part could be useful to analyse why the value disappears after hitting enter:
Main Program     SAPLCVOB
Source code of   LCVOBU02
FUNCTION         KEY_ZU_OBJEKT
SELECT SINGLE * FROM TCLO
       WHERE OBTAB EQ OBJEKT.
IF SY-SUBRC NE 0.
RAISE NO_OBJEKT.
ENDIF.
NAME = 'MCDOKOB'.
IF NAME CP '*# '. ENDIF.
WRITE '-' TO NAME+SY-FDPOS.
IF NAME CP '*# '. ENDIF.
IF NOT TCLO-KEYF0 IS INITIAL.
WRITE TCLO-KEYF0 TO NAME+SY-FDPOS.
ASSIGN TABLE FIELD (NAME) TO <KEYF1>.
DESCRIBE FIELD <KEYF1> LENGTH LEN1 IN CHARACTER MODE.
KEY1 = NAME.
ENDIF.
IF TCLO-KEYF0 EQ SPACE.
KEY1 = ' '.
LEN1 = 0.
ENDIF.
Here the keyfield is read from table TCLO and then the length is read from structure MCDOKOB for example. So it is necessary that the same data is maintained in table TCLO and structure MCDOKOB to grant the correct working for new individual objects.
Best regards,
Christoph

Word Add in disappears after computer restart

We are using Office 2007. The BI publisher word tab add in disappears after reboot. When we try to re-install the control panel has the option to repair which indicates that it is still installed. Any ideas on what causes this? Thanks.

#2 - No, the other add-ins stay, it's just this one.
Just to clarify my original question - wasn't asking if the other addins stay but specifically if the machine in question is "identical" in terms of what is installed etc
There is a known issue where Outlook addins will get disabled if the addin exceeds some Outlook load threshold time so if you have 5-6 other machines that work without any problems, logic would dictate that there is some difference (however subtle) between
the machines that work and the one that doesn't. Have no idea personally what that might be (i.e. if everything else is supposedly the same, is the problem machine as fast as the others in terms of processing power & memory etc). Not likely
that this is first time the ZixCorp folks would have heard about it (mind you - there is a "first time" for everything for any issue reported to a company so the questions I've asked about similarities would also likely be asked by them.
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

A third party plug-in disappears after a localization patch installation

I have a third party plug-in installed for PhotoShop CS3.
The third party plug-in disappears after installation of a localization
patch. I tried reinstalling the plug-in, but that does not work.
It appears that after the patch is installed, tw10428.dat maps
the English texts on the menu to Korean.
"$$$/Menu/Help/AboutPhotoshop=Photoshop 정보(&A)..."
"$$$/Menu/Help/AboutPlugin=플러그-인 정보(&B)"
"$$$/Menu/Help/Contents=Photoshop 도움말(&H)..."
"$$$/Menu/Help/Home=Photoshop 온라인(&O)..."
And somehow, the third party plug-in disappears because it's not mapped
in the .dat file. I tried manually editing the file and to input
entries for the third party tool and that does not seem to work.
Do you know how I can resolve this issue?
Thanks in advance.
Stephen Moon
[email link deleted]

Chris,
How can I install it correctly? It is
The plug-in was working fine before the patch. The patch
is just an executable which I ran after I closed Photoshop.
There wasn't any error message and the instance of Photoshop
works fine when I re-run it other than the fact that the plug-in
is no longer in the menu.
Stephen
[email link deleted]

When I boot holding option, both Mac and Bootcamp partitions show up, but disappear after 2 seconds.

I recently swapped out my HDD for an SSD in my 2007 MBP. Hardware installed fine. I installed Mountain Lion from a time machine backup (of the same machine). I made the Windows partition in OSX, then installed Windows 7 on the partition it had made. In Windows, I updated Bootcamp to 3.3.
Everything seems to work fine in both OSX and Bootcamp from what I can tell. The problem is, when I boot and hold option to choose my boot drive, both drives appear and then disappear in about 2 seconds. They disappear with a "poof" animation, as if you had dragged an app off of the dock. If I'm fast enough, I can choose the boot drive before it disappears.
I tried once again reinstalling OSX from my last time machine backup (prior to the SSD swap), and the problem persists.
I thought it might have something to do with NTFS 3G and MacFuse, because I'd heard that they cause a bug where the bootcamp partition won't show up under the "startup disk" preferences pane. When I uninstalled said programs, bootcamp showed up under there startup disk options, but the problem persists.
Any ideas?

Actually, this is just getting weirder.
Disregard my edit above. Clicking once doesn't have any effect on the drives. But the drives disappear only coming off of a RESTART from OSX. If I Shut down fully, the problem is solved. Likewise, if the drives have disappeared after a restart and I am forced to turn off the computer by pressing the power button, upon boot up the drives no longer disappear (Regardless of any action I take).
It would seem that the drives are disappearing due to something during the restart process.
Okay: Here are some workflows that might shed light on the situation:
Boot to Mac -> Shut down -> Alt boot : DOES NOT DISAPPEAR
Boot to Mac -> Restart -> Alt boot: DISAPPEARS
Boot to Mac -> Shut Down -> Alt boot -> Boot to Windows -> Shutdown or restart -> Alt boot : DOES NOT DISAPPEAR
Boot to Mac -> Restart -> Alt boot & fast select -> Boot to Windows -> Shutdown or restart -> Alt boot: DISAPPEARS
Boot to Mac -> Restart -> Alt boot & disappears -> Turn power off -> alt boot: DOES NOT DISAPPEAR
So the core culprit is something to do with OSX restart. The method of shutdown during windows doesn't seem to matter.

"On my Mac" folder including all my subfolders in Mail have disappeared after Yosemite install! HELP!

"On my Mac" folder including all my subfolders in Mail have disappeared after OS X Yosemite version 10.10.2 install! What should I do?

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Captivate program popups disappear after 1 second

Hi,
Anyone have this problem? Captivate runs fine for a while.
Then you hit properties on something to edit it and the popup
disappears after half a second. THe only way to get captivate to
work again is to close it, find the captivate.exe process and kill
it. Or reboot the machine. I have an employee losing about an hour
a day to this.
Thanks

Hi Pete
What you are reporting sounds like the old flash and
disappear menu when you interact with a Flash object. So when you
see this happening, try clicking an object in the library to place
focus there and things should normalize.
Cheers... Rick

Bridge CS3- Labels & Ratings disappear after processed in Noiseware (was okay in Bridge CS)

Similar Messages

Maybe you are looking for