Bridge CS3 Loupe Pixelation

The loupe in Bridge can't focus on a close up at full res. It displays tiny pixels. I have 4GB RAM and thumbnails set @ 1000 MB in Prefs. Funny, I had no problem on a Mac with less RAM. Or is Leopard the problem? Help!

>You can adjust the percentage with the scroll wheel on your mouse.
Or with the + and - keys. (For those who don't have a scroll wheel, like me.)

Similar Messages

Bridge CS3 Loupe tool in Lightroom

I would love to have the loupe tool present in Bridge CS3 in Lightroom in addition to the current zoom view. I found the Loupe in Bridge excellent for a quick check on the focus of certain part of the picture.
I also like very much the view type 3 in Bridge CS3 - this is the one with EXIF information + image size + workspace ,... on the side of the image.
I would like to have this view as an option to the grid view in LR.
Regards,
Luc

>You can adjust the percentage with the scroll wheel on your mouse.
Or with the + and - keys. (For those who don't have a scroll wheel, like me.)

Video pixel ratio in Adobe Bridge CS3

How do I get the video Pixel Ratio to show in Bridge CS3? I went to preference and it is already checked. But, I can't seem to figure out how it show in the metadata tab. Thanks for your help.
Perry

In the Find box the Match drop down has 2 options. "If all criteria is met" is like "and" while "if any criteria met" is like "or" logic.

Color Cast Only On Mac Generated jpg files When Viewed In Bridge Cs3 Preview

Hi,
( Issue With Cs3 Bridge Viewing Jpgs - Getting Colour Cast on the Mac Generated Jpgs Files Only When Viewed In Bridge Cs3 On PC )
Using CS3 creative suite Mac & PC and viewing all files on the PC.
We have psd files when viewing in bridge they are ok and save jpgs via PS3 both on the Mac & PC off the same PSD file that we started with.
But when viewing these jpg files in bridge we get a red cast only when viewing from the Mac generated files from the same PSD we started with.
When we open the jpg files up in Photoshop all of them are ok we no issues only when viewing in bridge we get the red cast.
All PSD files have the same information content:
Bit depth
Colour space
Pixel size
Why are we getting this happening.
Thnx

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

Adobe Bridge CS3 windows error

Hi,
When I open Bridge cs3 on its own after a few seconds the window banner comes up. Adobe bridge has encountered a problem and needs to close.We are sorry for any inconvenience. The same happens if I try to open bridge from within Photoshop cs3
I can still work in the programme ok and move the windows error aside, I would like to fix the problem, Tried to debug but the programme just closes.
I use windows xp pro with all the latest updates that are available.
have any others experienced this problem and how to fix it.
Thanking you in advance.

Mikep500 wrote:
This is a copy of the message that comes up.
No messageto see, but you can check your Startup Scripts in Bridge preferences. Mine are like this:

Adobe Bridge CS3 crashes on load in my Windows 7 workstation.

Adobe Bridge CS3 crashes on load in my Windows 7 workstation.
I recently completely removed, deactivated and reinstalled all my Adobe Creative Suite CS3 Master Collection to solve some problems with other application from the suite and now I'm surprise Bridge continues to fail. In my portable workstation the same software (Bridge) uses to work.
I tried launching Bridge under several compatibility modes. All failed.
Is there any know bug I should be aware of? Any fix?
Is this a common problem?

Curt Y. Thank you for your answer.
It was only Bridge who was crashing. It failed to load and Windows was giving an error message.
I tried your suggestion, and resetting all options in the reset window it now loads. It was as simple as that.

Bridge CS3 Workspace Adobe Lightroom Web Gallery Creator

A while back I was looking around for an easy way to create sharp looking image galleries with minimal work, and I came across a workspace plug in for Bridge Cs3. If I remember correctly, it was labeled Adobe Lightroom Web Gallery something or another. Anyway, I recently formatted my computer and reinstalled everything, but for the life of me I can find no trace of that handy workspace plug in. Does anyone know where I can find it? It had a bunch of customizable flash galleries as well as a customizable html gallery as well. Any help would be appreciated!

Do you mean AMG( Adobe Media Gallery)? You could download from LAB.
http://labs.adobe.com/wiki/index.php/Adobe_Media_Gallery

Don't have permission to delete files in Preview or Adobe Bridge CS3

Help!
I'm unable to delete image files in Preview or Adobe Bridge CS3.
Workflow:
1. Take a bunch of photos on my Nikon
2. Load them to my MacBook Pro, 10.6.3
3. Open them in Preview and right-click "Move to Trash" on the photos that I don't want.
==> this results in "Move to Trash Failed. Some files could not be moved to Trash."
4. If I open the bunch of photos in Adobe Bridge CS3 and command-delete the photos that I don't want
==> I get "The operation cannot be completed because you do not have sufficient permissions."
I am logged in as the same user who loaded the image files.
Permission on the image folder start out at
me: Read & Write
admin: Read only
everyone: Read only
but even if I change all to Read & Write, I still get the same errors.
What's going on?????
Thanks.

Did you ever figure this one out? I'm having the same issue...

Why is my iPhone no longer able to communicate with adobe bridge cs3?

We have 2 iphone 4's that I have been able to download photos from and into my imac for the last year while using the adobe bridge cs3. Recently, it began giving me an error meassage: " Adobe bridge cs3 cannot obtain files from this device. Please ensure that the device is connected properly,or that the battery is charged, adn try again".
I did both and that message still pops up. My usb ports are working fine as well as the usb cords(as far as I know of) and the batteries are fully charged when I do so. So what is the deal here??? If anyone can please help I would greatly appreciate it.
Thanks!!!

Maro,
I'm running VISTA on my PC. None of the suggestions solved the problem. I uninstalled iTunes removing all suggested files from another post and reinstalled iTunes 11.1.3 and removed the iTunes Ibarra from my iPhone Remote. I restarted the computer, iPhone & router. I added the iTunes library to my iPhone remote. I didn't get an icon on the menu bar of the iTunes on the PC but a dialog came up asking for the code which was on my phone. I typed in the code and the library showed up on my iPhone Remote. I selected it and got an error message that it couldn't connect. This is extremely weird and frustrating. What should I do now?
Jake

Can't Directly Rate my Images using Stars in Adobe Bridge CS3

Hi
I can rate my images in Adobe Bridge CS3 by using the drop down 'Label' menu. However, I cannot rate my image by stars directly under my image thumbnails as my book suggests I can. The book states: "You can also assign stars directly under the thumbnail by clicking on the dots".
Is there anyway I can do this? Do I have to change some preferences?
Many thanks in advance for anticipated help.

try resetting your preferences by holding Ctrl right after you launch Bridge(you have to be fast, you'll get a dialog box if you succeeded)
Though you'd need to do this only if you are doing it correctly in the first place. With a picture selected you'll notice 5 small dots beneath its thumbnail which you can click on to rate things. If you don't see the dots then increase the thumbnail size by adjusting the slider at the bottom of the screen

Some workstations not allowing Adobe Bridge CS3 application launch

Hi all.
I'm pretty new at helping manage a MIDI/art lab at a high school campus (not new to Macs, but new to this issue).
We have a student login for an art class where students should have complete access to the Adobe CS3 suite of applications. The account is logging in on a server, running apps on the local hard drives, and an entire class of students all log in at once. We've tried to keep all the iMacs current in terms of Adobe updates and other software updates.
The problem is this: there are four iMacs which - in spite of all updates being equal, and the fact that all users are logging into a network account (thus all having the same set of rules, permissions, and restrictions) - fail to allow students to use Adobe Bridge. At these four stations, launching Bridge gets this error:
+*The Application "Bridge CS3" is not allowed.*+
+"Bridge CS3"is not on the approved list of applications. Contact the person who set up your account for more information.+
We've tried several things, including running Adobe updater (again), Apple software update, and resetting/trashing Bridge's prefs.
Again, every user should be experiencing the same permissions and restrictions, and this issue seems to be tied to hardware as it only applies on four of the iMacs. Logging in as an administrator or a local account with full permission allows clear access to Bridge. However, we need the Art Class account to work on all our stations as students use Bridge regularly for class.
Any input and suggestions will be greatly appreciated.
(By the way, these are Intel iMacs running, I would presume, Snow Leopard. The model and OS info shown below are my machine, not the lab stations.)

Curt Y. Thank you for your answer.
It was only Bridge who was crashing. It failed to load and Windows was giving an error message.
I tried your suggestion, and resetting all options in the reset window it now loads. It was as simple as that.

Keyword selection function in Adobe Bridge CS3

Hello,
Does anybody know if and how I can change the "selection criteria" of keywords in Adobe Bridge CS3?
-> selection criteria: If I want to use the filter with the keywords, it selects the images which include any of the selected keywords (OR-function), but I would like to select only those images which have all of the selected keywords(AND-function).
Example: In a holiday folder named "italy", I want to see all pictures with the keywords "beach" and "me". What I get are all the "beach" images and all the "me" images. How can I change this?
Would be great if someone could help me...!
Thanks!

In the Find box the Match drop down has 2 options. "If all criteria is met" is like "and" while "if any criteria met" is like "or" logic.

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

Help, which windows Service msut be on to run Adobe Bridge CS3?

hi all,
I'm having trouble opening Adobe Bridge CS3, theres a windows popup that says "Adobe Bridge has encountered a problem and needs to close" error message when i try to start.
I can run the other Adobe Cs3 applications fine, i've been playing around with the disabling of windows services to increase bootup time. i'm afraid i may have accidentally disabled something necessary
pls advice on how to get it working.. i'm on win xp pro sp2
thanks

When you get the "Bridge has encountered an error" popup box, check the technical info hyperlink to see what's the problem. It may point to a DLL that had an error.
From there, check the web to see what that DLL relates to, which may or may not give you a lead. Maybe something that needs to be running in WinXP, maybe a 3rd party product that needs to be fixed/removed/re-installed.
Why do I say this? I had the same issue on Bridge after getting the trial version. Worked for a while, then suddenly stopped working with the same startup dialog box and a quick shutdown. Digging a bit as above pointed to a DLL that was related to Quicktime. I went to the Apple site and downloaded/installed the latest version of Quicktime, and the Brige problem was cured.

Deleting Adobe Bridge CS3 Cache on Windows XP

Hi!
I need help deleting the Adobe Bridge CS3 Cache on Windows XP.
Not just purging thanks!

Well, you're welcome here any time, Emily, but this is the Adobe Bridge
Macintosh
forum.
The Windoze forum is across the hall. :)

Bridge CS3 Loupe Pixelation

Similar Messages

Maybe you are looking for