Bridge CS3 Manage Color Help menu wrong

The Help menu says-
Preferences (Mac OS), and click Advanced.
Select Enable Color Management In Bridge.
HOWEVER, the options I get when I go to Preferences and Click advanced DO NOT have Select Enable Color Management in Bridge as an option, see enclosed screen capture of the Bridge Preferences.
Color is going very wrong on my Xerox DocuColor 240, so I'm reviewing the color workflow from input to output.I have already downloaded and installed profiles spefic to my Doc 240, however, I'm having trouble figuring out how best to make use of them. Information as to the interactions between ColorSync and CS3 would be greatly appreciated.

Hi
Yes, that is not helpful anymore:P . That only applies to the original 2.0.0 build. The preference was removed and color management is On for all updates (2.0.1 - 2.1.1) when applicable. Draft thumbnails are not managed, along with some formats. This option also only described on screen display and has no impact on print output.
You will probably have better luck asking in the application forum that covers your printing output application, and or image editing/compositing application. Or maybe try the Color managementforum.
regards,
steve

Similar Messages

PSCS3 & Bridge CS3 complete crash-Help needed

After several months both PSCS3 and Bridge CS3 crashed. After several reboots with no success, I uninstalled everything.
I then reinstalled from scratch. Installed the updates. Now Bridge will not see previously viewed original CR2 files properly. No option to open directly to Camera RAW. When I go to my backup files, the CR2 files work fine.
From original CR2 files and backup files PSCS3 crashes when attempt to move from ACR to PhotoShop.
I am processing a photoshoot. Please help.

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

CS3 Design Premium help menu

I have the CS3 Design Premium installed on my computer
and I have no help menu in any of the programs. I select Help
opening the Help window, select my program in the browse menu,
write my topic in the search box and get absolutely nothing. Did my
program not install correctly. It was so wonderful in CS2.

Mac or PC?
Which OS?
Regards
John Waller

Photoshop CS3 manages colors

I want to disable color management by HP Photosmart C7282 All-in-One printer

Print-> Photoshop Manages Colors to choose an ICC color profile, there would be a companion Output box, where I could drag the Transfer slider
"Photoshop Manages Colors" disables the printer sliders under CS6 Photoshop
a proper Source-to-Print conversion should 'match' your monitor
just for grins try reviewing the updates/troubleshooting/workflow here: printing CS6
also recommend using a known good file like the PDI WhackedRGB reference file available on my link...

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

InDesign CS3 Help Menu opens constantly

The InDesign CS3 Help Menu opens constantly every time I click anywhere in a document to do anything.
Such as draw a box, insert type, anything. It virtually renders the program unuseable. I click to make an addition to a doc, travel up to the help menu to close it, do my thing, then repeat for the next action. Reinstalling has not stopped this. I cannot disable the Help Menu (which would be a fine solution BTW). I cannot afford to upgrade to CS4 right now. I am not sure that would stop it anyway. Photoshop, Illustrator, no other program in the CS3 suite exhibits this behavior. Anybody got any ideas? I recently recreated my whole OS and all programs on a new hard drive out of necessity. InDesign was doing this before that rebuild, and it does it now (after the reinstall). CS3 was reinstalled clean. That did solve a serial # issue with Acrobat where it wouldn't launch. I didn't transfer anything from the old hard drive except e-mail and internet settings.
Mac Pro Quad
Leopard 10.5.7
4 gigs ram
2 terrabytes internal hard drive space (four drives).
Thanks for any help in advance, I appreciate your time.
Michael

Are you using the default keyboard shortcut set or a custom one? Also, are you using any special mouse, keyboard or tablet input devices?
Try going to Edit->Keyboard Shortcuts->Help menu Product Area and see what the default Help shortcut is. Perhaps it has been set to something crazy like "mouse click". You may just set the Keyboard Shortcuts back to [Default] set and see if that does the trick too.
Alternatively, something either software or hardware related in your setup is frequently triggering that event, which may be the case if you have a non-apple kbd, mouse etc installed.

I have CS6 and I just got a new Leica D-LUX and can not view my RAW (.RWL) images in Bridge what do I do? I already tried updating Bridge from the Help menu.

I have CS6 and I just got a new Leica D-LUX and can not view my RAW (.RWL) images in Bridge what do I do? I already tried updating Bridge from the Help menu.

Did you use the Migration Assistant to help set up the new iMac using some of the files in the older PC? Some likely won't mean much, unless you have applications that can use or convert them. There's also a way to use the software Time Machine to import data files from an external or another computer, so you may have used that, too.
Hopefully someone with experience in a similar issue will reply...
Good luck & happy computing!

CS3 Help menu opens after every command

I have a user that every time they finish a command like create a new document or rotate and object the help menu opens. This interrupts their workflow since you have to click off the menu before continuing. I have tried deleting the preferences but that didn't help. I have also booted into safe boot and this does resolve the issue. Is there an other setting or preference I can remove that would resolve this issue?

If I recall.. around the time of CS3 there were issues with Unsanity "haxies" causing this as well as other small third party OS add ons.
You might...
A) Include what OS you are using
B) If it's Mac OS, try booting into Safe Mode by holding down the shift key when starting up the system and see if the issue goes away.

I have lost the photoshop manages color option from my print menu in CS6.

I have lost the photoshop manages color option from my print menu in CS6. It now has colorsync manages color as an option along with printer manages color. I don't know how to reverse this and I can no longer use my printer with any assurance of accurate color.
What could have caused this & how do I reverse it?

Assuming you have not gone to a newer version of WORD and it is just an update issue, then you should be able to go to the addins in the options of word and enable Acrobat. Sometimes the updates of WORD seem to disable the plugin. Note that the plugin is PDF Maker and shows up in the save as menu as well as an Adobe menu item in WORD. The printer is a separate process and does no require activation.
A repair of Acrobat may also solve the problem.

Bridge CS3 menu greying out

I have a JSX script that adds to Bridge CS3 a new menu element. It places it "after Tools" - ie it's a top level menu. The item appears correctly and is enabled when I open Bridge CS3. But it greys out after I go into File Info. This doesn't happen at all if I move the element to "at the end of Tools". Has anyone else seen this issue?
John

Yep, exactly the same problem. Just posted: http://www.adobeforums.com/webx/.3bbaa316.3c05a9da
At least we know we are not alone !
I guess it is caused by the fact that when the file info panel is open all the top level menu items are disabled, but then our extra one does not get re-enabled when the panel is closed. Something I would have thought could be fixed quite easily ???!!

My copy of InDesign CS3 has no Deactivate command in the Help menu

I would like to uninstall my copy of InDesign CS3 so that someone else in my group can install and use it. The instructions I have read say to make sure to run the Deactivate command in the Help menu first so the computer is not recorded as containing an installed copy of the program. The copy of InDesign CS3 that I have does not have a Deactivate command in the Help menu. I remember entering a license key when I installed it, so I assume it was activated at that time. Are there different editions of InDesign CS3, some that are deactivated by the Help->Deactivate command and others that are deactivated some other way? How can I make sure that my InDesign CS3 copy has been deactivated when I uninstall it?

Volume licensing doesn't typically use activation. Is this an enterprise situation?

CS3 Flash Help Menu

I don't comment much, I tend to be the quiet kind of user
that just does my own thing. I am quite upset with Adobe's change
in the help feature in Flash. I understand that things change with
updates. That's a reason i get work sometimes. Someone wants to
update.
I so loved the large amount of useful code and examples
buried in the Help files in previous versions of Flash. Through
these i could riddle my why through a problem. Multiple examples of
how to use something was often the only way to figure out what I
was trying to do.
Are those days now long gone? I hope not. I am not a
programmer, but i do have some programming experience. I am a web
designer. i prefer not to live in binary, classes and the like.
Often these samples worked as idea starters, and answers to late
night prayers when the oil had been burning all too long. You know,
when your head gets fuzzy and you need to go to bed but the project
has to be done....
Well I don' t mean to be the whiner, but is there anything
that can be done about this?
I know there are some samples in there, I flipped through it
for a while, but i feel the quality of the Help menu in Flash has
dropped dramatically. The new neat features in the Help menu and
the nice skin don't measure up to the loss in content. I plan on
working with MX by my side so i can use its Help features, because
CS3 doesn't look like it will do the job.
Anyone else want to comment?
Thanks,
mr_bidinkle

I found this thread through a search.
Has Flash help menu been savaged to leave only two headings??
I only have the following two main headings in my Help Menu:
Using Actionscript 2.0 Components
Actionscript 2.0 Components Language Reference
I have bought the Rich Media Project Player and List
Component and they said their help file is also installed.
I cannot see that here either.
Whats going on? Can an Adobe person answer this for
me??

My CS6 Production suite does not update from the help menu? The appilcation Manager says: "The updat

My CS6 Production suite for Windows 8 does not update from the help menu? The appilcation Manager says: "The update server is not respondiing, the server might be offline temporarily..." I have registered correctly. I have turned off my AVG virus protection and tried to update my software, still the Application Manager gives the same response. When I login, I can see that my serial numbers are there, so it must have registered correctly.
Help!

If you don't want to download the updates manually, then you need to update your Application Manager. The relevant links are here:
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Hope this helps.

Help, which windows Service msut be on to run Adobe Bridge CS3?

hi all,
I'm having trouble opening Adobe Bridge CS3, theres a windows popup that says "Adobe Bridge has encountered a problem and needs to close" error message when i try to start.
I can run the other Adobe Cs3 applications fine, i've been playing around with the disabling of windows services to increase bootup time. i'm afraid i may have accidentally disabled something necessary
pls advice on how to get it working.. i'm on win xp pro sp2
thanks

When you get the "Bridge has encountered an error" popup box, check the technical info hyperlink to see what's the problem. It may point to a DLL that had an error.
From there, check the web to see what that DLL relates to, which may or may not give you a lead. Maybe something that needs to be running in WinXP, maybe a 3rd party product that needs to be fixed/removed/re-installed.
Why do I say this? I had the same issue on Bridge after getting the trial version. Worked for a while, then suddenly stopped working with the same startup dialog box and a quick shutdown. Digging a bit as above pointed to a DLL that was related to Quicktime. I went to the Apple site and downloaded/installed the latest version of Quicktime, and the Brige problem was cured.

Color Cast Only On Mac Generated jpg files When Viewed In Bridge Cs3 Preview

Hi,
( Issue With Cs3 Bridge Viewing Jpgs - Getting Colour Cast on the Mac Generated Jpgs Files Only When Viewed In Bridge Cs3 On PC )
Using CS3 creative suite Mac & PC and viewing all files on the PC.
We have psd files when viewing in bridge they are ok and save jpgs via PS3 both on the Mac & PC off the same PSD file that we started with.
But when viewing these jpg files in bridge we get a red cast only when viewing from the Mac generated files from the same PSD we started with.
When we open the jpg files up in Photoshop all of them are ok we no issues only when viewing in bridge we get the red cast.
All PSD files have the same information content:
Bit depth
Colour space
Pixel size
Why are we getting this happening.
Thnx

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

Bridge CS3 Manage Color Help menu wrong

Similar Messages

Maybe you are looking for