Bridge CS3 shows disclosure triangles when no subfolder present

I am using Adobe Bridge CS3 v2.1.1.9 with Mac OS X 10.4.11.
In the left pane of Bridge is a list of folders. Any folder that contains a subfolder has the small disclosure triangle to its left. Clicking on the disclosure triangle opens the folder to show the subfolders.
But here is the problem: many folders show a disclosure triangle but there is NO subfolder contained within.
Solutions? Thanks!
db

I believe that you have it reversed. It should show a disclosure triangle if subfolders are present. There should not be a disclosure triangle if subfolders are not present within that folder. The Folders list in the left pane is designed to show folders but not files. Files/images show up in the Content pane.
Note, also, that Bridge CS2 behaves properly with disclosure triangles only when a subfolder is present. I have switched back and forth between the two the past few days to test this and the previous version works properly.
I have corresponded with others who note that this is a known problem but that no fix is available. I would be happy to learn otherwise! However, this is more of an annoyance than a real problem since it has no adverse effects on my workflow.
Thanks for the response,
db

Similar Messages

Bridge CS3 shows different colour on previews when they are selected

LS,
Problem, all of a sudden: Bridge CS3 shows different colours on previews when they are clicked and selected. At first, they are ok, they look the same as they are on camera. When I click an image and select it, it looks like there's a colour profile being applied to it, making the colours dull, its also pulls back the contrast of the image. Can this be corrected in prefences or something? So that the previews are the same as non corrected raw processed files?
David

Oh, good grief… Sorry. I forgot you haven't updated yet. My bad.
In CS3 you'll find the Auto Tone adjustments in the Camera Raw preferences, and the use of high quality in Bridge preferences. You won't have all the options available in CS4.
If you are shooting raw, the upgrade to CS4 just to be able to use ACR 5.3 (and now 5.4) is a no-brainer. Well worth the money.
If you don't upgrade, you'll be leaving a lot of raw image quality on the table, as Jeff Schewe says. ACR 4.6 is light years behind 5.3 and 5.4.
In addition, Bridge 2.x (CS3) is easily the worst piece of software ever released by Adobe or any other major software developer. It should have been fixed for free by Adobe, but shamefully, it wasn't. I would not hesitate to call it an unusable, worthless piece of cr@p. Fortunately Bridge 3.x (CS4) is much better.
However, I repeat: What you are seeing is perfectly normal, expected behavior.
Message was edited by: Ramón G Castañeda

Bridge CS3 shows no thumbnails??

Adobe Bridge CS3 has been working fine for quite a while. I have been having
some problems with my System (C) drive, where it and Photoshop CS3 are
installed.
I swapped out the C drive, and restored an image of the drive, and most
items are working OK. But I'm guessing that Bridge may have suffered some
"corruption", prior to when the image was made.
When I open Bridge CS3, it opens normally. with the files listed on the
lower left, but there are no thumbnails visilbe for any images. Momentarily,
I did see some for one folder, but now they are all not showing anyting at
all in the thumbnail or individual window on screen.
Just for kicks, I double clicked in the middle of where the thumbnails
should be, and an image then opened in Photoshop. So they appear to be
invisible, but present.
Any suggestions here? Is repair install needed, or is there a setting
somewhere that has gotten messed up, that can be simply fixed??
Ron Hisch

Hi John, I just took a look at my settings now in Bridge CS3. That box is not currently checked, and the Bridge Cache files are no longer in the associated folders. Apparently this was not the case prior to my problems. I don't remember ever making a choice here. The centralized cache obviously makes it easier to purge when problems come up. Are there any negative aspects of using the centralized cache? What I cannot understand is how essentially all the cache information in a hundred folders in my image tree on my D drive suddenly all became corrupted at the same time. There must have been something else on the C drive that caused this. In recent days, I was in the process of replacing my C drive due to strange happenings, and restoring an image of that drive to the new drive. I would have to beleive that on C drive in a Brdige folder somewhere, there was a "master" controlling file or ?? that worked with the cache, and it got messed up. Ron "John Joslin" <[email protected]> wrote in message news:[email protected].. If the option to "Automatically Export Caches To Folders When Possible" is checked in Bridge Preferences (as Ron apparently did) I can't imagine that the purge can be done system wide with one click. I have always used a centralised cache, for this and other reasons.

How can i show input text when no row present in database.

Hi All,
I am using Jdeveloper 11g Release1(11.1.1.4.0)
I have created EO and VO which is based on that EO.
By using Vo i have designed .jspx page ,on that page i have taken adf form which is based on that VO.
My problem is when database table is blank (i.e zero row) then input text on page not displayed.
I want to show blank input text when such condition occurs.
Thanks
Imran.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

AE CS3: Bridge CS3 Causes AE CS3 to Crash on Open

I just wanted to post something here to help out anyone who is running Windows Vista 64-bit with Production Premium CS3.
Both AE CS3 & Bridge CS3 work fine - however when I have bridge open first and then launch after effects, after effects constantly crashes on the title screen.
After looking for several fixes for this, I tried closing bridge. After that I was able to launch AE CS3 just fine. I can then re-open bridge and both programs run just fine.
Another one of those weird quirks. Hope this helps someone out.
-Charley

Did you try it again? Just because it crashed once doesn't necessarily mean it will crash every time.

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark.

I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark. Did I loose those pictures or is there a problem with iphoto

How about the most likely occurance - something incorrect about how the iPhoto library was transfered
What version of iPhoto '11 (9.4.3 is the latest)?
exactly how was your iPhoto library transfered to your new hard drive
This indicates that there is a problem in the iPhoto database - a possible solution to try is Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
Why did you get a new hard drive? What kind of backup do you have?
LN

Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

Bridge CS3 not showing images

Today Bridge CS3 partially stopped working. Images do not show up in the content window but this is inconsistent. It happens with only selected folders. The data under filters does show the folder data. If I try to open (clicking on) a non-existent image in the content window, PS or Camera RAW will open for that image. I have one internal HD and 3 external LaCie drives. Copy an affected folder to a different HD or to the desktop sometimes works but only intermittantly. All the permits, etc. for the folders are the same, read/write permission granted and everything else the same. Sometimes folders that previously opened do not open at a later time.
I've tried restarting the computer and Bridge, no difference. Two events occurred prior to the problem. I installed Apple's latest security update and the new Adobe Reader update. Other than that nothing particular occurred. I am also using Lightroom2 which is working OK. The image are in the folders OK, open in PS, etc. They just don't show up in Bridge.
My computer skills are medium, been user since Photoshop 6.0, taken a number of PS workshops at SFW and Maine, and am competent at using the program. This is over my head. Help.
Bob Gaunt

Thanks Ramon,
It works but with a few other problems I pretty well sorted through. It took a couple of Bridge quit and restarts to get Bridge to open the external drives. Now that's OK. Then it seems at times to hang up trying to generate thumbnails, have to force quit Bridge and try over. Since Bridge worked fairly well for several years, I'm wondering what happened. Maybe just one of life's mysteries.
I have CS4 on the shelf, installed it and couldn't get the drivers for my Epson 2200 installed. The CS4 included generic driver is junk, Epson quit supporting the 2200, so I re-installed CS3 for the time being.
Bob

Bridge cs3 and content panel not showing all images

I am using Bridge CS3
If I scale my panel images down very small all are visible. If I enlarge the images beyond the visible area, a scroll bar appears. However if I move the scroll bar to the end, it does not show the last two images. I cant get to them
Any suggestions on what is happening
Jack

Jacj,
Did you ever find a solution to this problem. I am faced with same problem as detailed by you and here:
http://forums.dpreview.com/forums/read.asp?forum=1004&message=27027323
I do not see a great solution in the posts at attached link, other than perhaps resetting workspace.
Thank you,
J

Color Cast Only On Mac Generated jpg files When Viewed In Bridge Cs3 Preview

Hi,
( Issue With Cs3 Bridge Viewing Jpgs - Getting Colour Cast on the Mac Generated Jpgs Files Only When Viewed In Bridge Cs3 On PC )
Using CS3 creative suite Mac & PC and viewing all files on the PC.
We have psd files when viewing in bridge they are ok and save jpgs via PS3 both on the Mac & PC off the same PSD file that we started with.
But when viewing these jpg files in bridge we get a red cast only when viewing from the Mac generated files from the same PSD we started with.
When we open the jpg files up in Photoshop all of them are ok we no issues only when viewing in bridge we get the red cast.
All PSD files have the same information content:
Bit depth
Colour space
Pixel size
Why are we getting this happening.
Thnx

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

Bridge CS3 Stopped showing NEF thumbnails

I use a Nikon, formerly a D70, now a D90. I always shoot in raw and JPEG. I have had Bridge CS3 on my iMac for about a year and a half with no problem. About a week ago it stopped displaying NEF thumbnails. I just see the NEF icon. I can open the NEF images, and JPEG images show as thumbnails. To my knowledge I have not changed anything, although my son sometimes changes some settings. I have my computer set to automatically download updates. Reviewing the threads in this forum I see some similar problems, but not this one. Anybody have an idea?

I have ACR 4.6.030. I do not see a 4.7 on the ACR updates. The next appears to be 5.1, which is for CS4, no CS3. I appreciate your input. If you have any other ideas I would be interested. I still have not been able to get it to work. Very odd, since I had always been able to see NEF thumbnails, taken both by the D70 and D90.

How to preserve disclosure triangle state in audio bin when I close L8?

Every time I open the audio bin, all my clips and loops have their disclosure triangle 'opened' and thus display every version of every clip. It makes for a long, long list.
I would like to configure logic such that the disclosure triangles in the audio bin default to being closed, or preferably, preserve their state when I close L8.
Anyone know if this is possible? Anyone? Bueller?

sorry, that is not what I want to do.
I want to return to the initial state before I quit the app.
Actually, I want to return to the intial state after I click a row in a table the second time.
Sorry, I didn't say clearly.

When i open a file the pictures show at bottom, but when I click on a pic it only shows a triangle with a ! in the center

when i open some files the pictures show at bottom, but when I click on a pic to open it only shows a triangle with a ! in the center

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Bridge CS3 shows disclosure triangles when no subfolder present

Similar Messages

Maybe you are looking for