Bridge CS4- Cannot get vertical filmstrip

Hi,
Even though I select the vertical filmstrip option, I only get the images at the bottom, horizontal display, not vertical on the side as in Bridge CS3.
What am I missing?

Thanks, after some effort I did get it set up. Why did the developers make this so hard? It was much easier in CS3. Is there a way to save this work space?
Also, I am not able to move the panels around. I would like to shrink the metadata panel below the content panel. I am unable to separate the panels.
See my screen captures @ http://www.pbase.com/choco1/test090110a
Thanks for all the help.
Mogur203

Similar Messages

Bridge CS4 cannot view or edit G10 CR2 files

Hi,
I have searched for this and come up with a few pointers but so far none has worked for me.
Running PS CS4 11.0.1
Got latest CR 5.5 and it is in the correct place.
Have run CameraProfiles exe file.
Have deleted and rebuilt icon cache for folder(s) in question.
Do not have this issue with NK2 files from my D70s
My issue:
When in Bridge I cannot see any image icons for Canon G10 .CR2 file. It is a generic icon. When I right-click on the file I am not offered "edit in CameraRaw".
HOWEVER - When in Lightroom 2.5, I CAN see the actual image files, and if I choose edit in PS, it opens CameraRaw in PS.
What gives? My wife _hates_ lightroom and she just wants to broswe the files in Bridge and then edit them in CR, but can't. It's "my fault" for shooting RAW images rather than JPEGs ;-)
Please help!
Thanks in advance

Hi,
Hmm. I can't find an about CR button or link, but when I open the Camera Raw prefs from the top menu in the plug-in, I can see 5.5.097 in the top bar of the prefs window. I placed the 5.5 8bi file in the file formats sub-folder of the plug-in folder of PS yesterday. I did not have it installed in there at all previously, so no need to remove the old one or overwrite; I just placed it in there.
Also, I'm going mad, the Nikon files are .NEF not NK2 sorry

Bridge CS4 Cannot launch Photoshop

When opening an image from Bridge, I get the Photoshop splash screen, then "Photoshop has stopped working. Windows is checking for a solution to the problem." (If Photoshop is already running, I have no problem.) This also occurs if I attempt to open an image with Photoshop from Windows Explorer. Also, while the icon on the Windows Start Menu launches Photoshop successfully, the shortcut placed on the desktop when CS4 Creative Suite was installed also had the above problem. This would indicate the problem was created at installation.
I suspect there is a problem with the path, but I can't figure out how to fix it. Would like a global fix rather than having to change paths for every file extension pointing to PS CS4.
(Windows 7)
Your thoughts?

All the applications are checked there. However, when you click on the button to "Reveal Scripts" it takes me to an empty folder. Sounds like a problem, BUT....
I checked with someone else and their folder shows empty too, plus my Illustrator launches properly. (BTW, this is not in a corporate environment, just a personal copy on a personal computer.)
I sure appreciate your suggestions, though. Keep 'em coming!

CS2/CS3/CS4: Cannot get file path in Unicode of the current document on Windows

Hi All,
In my automation plugin I need to have full absolute path of the opened document with any possible non-English letters. Using SDK examples Listener and Getter that come with Photoshop SDK the full absolute path which I obtain is in the default ANSI code page (CP_ACP) and I can convert it to Unicode using MultiByteToWideChar() API. However this works well when I have corresponding to document name language set in the "Control Panel -> Regional and Language Options -> Advanced -> Select a language to match the language version of the non-Unicode programs you want to use." For example if name of the document has Russian letters and chosen language in "Regional and Language Options" is also Russian the described conversion works well. If I change "Regional and Language Options" to English for example, full path returned by Photoshop SDK API (AliasToFullPath in PIUFile.cpp) for the document with Russian letters will contain "????????.psd" symbols.
So I need to have an ability to get absolute file path in Unicode. Is it possible in Photoshop CS2/CS3/CS4 for Windows? I have searched forum and SDK but could not find info on it.
Is it possible to have native HANDLE of the opened file to get file info using Windows API?
Please advice.
Below given slightly modified code from Photoshop CS3 which I use to get absolute file pat of the opened document.
Thanks and regards,
Sergey
std::string outFilePath;
int32 theID = 0;
SPErr error = kSPNoError;
error = PIUGetInfo(classDocument, keyDocumentID, &theID, NULL);
if (error == kSPNoError)
Handle theFileHandle = NULL;
error = PIUGetInfoByID(theID, classDocument, keyFileReference, &theFileHandle, NULL);
if (error == kSPNoError)
int32 length = sPSHandle->GetSize(theFileHandle);
Boolean oldLock = FALSE;
Ptr pointer = NULL;
sPSHandle->SetLock(theFileHandle, true, &pointer, &oldLock);
if (pointer != NULL)
outFilePath = (char*)pointer;
sPSHandle->SetLock(theFileHandle, oldLock, &pointer, &oldLock);

Hi All,
Does anybody know, whether it is possible to get Unicode file path of the current document in Photoshop via Photoshop SDK API or without them?
Thanks,
Serhiy

Dreamweaver CS4 Cannot get Spry.Data.NestedXMLDataSet with XML to work

Please help!
I've created a page in Dreamweaver CS4 with a spry dataset. This works great. I've downloaded Spry.Data.NestedXMLDataSet and installed it but I keep getting an error that nested datasets are not supported.
Thoughts solutions.
Thanks,
M

I have found the reason that I could not make it work, I did not have the correct JavaScript file installed.
Having made the correction, here is a code that does work but most likely does not have the formatting that you want. I will leave that up to you.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryNestedXMLDataSet.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMasterDetail.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">

</script>
</head>
<body>
<div class="MasterDetail">
    <div spry:region="ds1" class="MasterContainer">
      <div class="MasterColumn" spry:repeat="ds1" spry:choose="">
        <div spry:when="{ds_CurrentRowNumber} == {ds_RowNumber}" spry:setrow="ds1" spry:select="select" spry:hover="hover" spry:selected="">{artistnamebtn}</div>
        <div spry:default="" spry:setrow="ds1" spry:select="select" spry:hover="hover">{artistnamebtn}</div>
      </div>
    </div>
    <div class="DetailContainer">
      <div spry:detailregion="ds1">
        <div class="DetailColumn">{genre}</div>
        <div class="DetailColumn">{picture}</div>
        <div class="DetailColumn">{artistnameblock}</div>
        <div class="DetailColumn">{biotext}</div>
        <div class="DetailColumn">{audiotracklist}</div>
        <div class="DetailColumn">{audioplaylist}</div>
      </div>
      <div spry:region="ds2">
          <p> </p>
          <p>videos</p>
          <div spry:repeat="ds2">
          <p>{videoname}</p>
          <p>{videothumb}</p>
          <p>{videourl}</p>
          <p> </p>
        </div>
      </div>
    </div>
    <br style="clear:both" />
</div>
</body>
</html>

Bridge crashed cannot get it to open

Bridget crashed and how do I get it to reopen, have retried a number of times

Have you look at the crash reports to see if it point to a failing module?

Viewing MS Visio drawing vsd in Bridge CS4 is very poor

Whe I open folder with MS Visio 2007 drawings in Bridge CS4, I get very low quality preview of them.
When I open an old vsd file, made in Visio 2000 and save it in new format 2007 vsd, preview is good! It happend only with new created drawings in Visio. Deleting Bridge cashe didn't help.
Is there any plug-in to solve this?
Please, help.

Quote from: Svet on 18-September-11, 18:31:16
apply vga reference clocks then retest
Thanks for the reply Svet.
I assume you mean to use MSI afterburner and put the clocks at the default for 560 TI which are the following based on my googling?
MY card currently:
VDDC .9500V-1.000V (depending on 3d load and according to GPU-Z)
GPU clock: 880 MHz (the "sensors" tab reports this as 882.3 for some reason)
Shader clock: 1760MHz
Memory clock: 1050MHz
what you want me to change them to:
VDDC 1.0000 (which is default for this card IIRC I haven't unlocked voltage controls yet to check)
GPU clock: 822MHz
Shader Clock: 1644MHz
Memory: 1002MHz

I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]

Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cannot sort files in bridge cs4

Hi
As you know it, since Windows XP xp2, the explorer sorts the files this way :
1, 002, 03, 000004...
For getting back the "right" alphabetical way, you can change the registry. So did I.
Now in the explorer, I get the files sorted like this :
000004, 002, 03, 1
Well
but in adobe bridge CS4, nothing changes. the files are sorted : 1, 002, 03, 000004...
Is there a way to have the files sorted like in explorer ?
thanks for your replies
(Sorry for my bad english)

Yes it can be done but it's very messy!
The following script should do the job BUT it does require you select Manual sort and move any document first! This makes sure that a hidden file .BridgeSort is created in the folder. This file is re-created into the correct order then a new window is opened and the old window closed. This is because Bridge only reads this file when it opens.
Using ExtendScript Toolkit copy and paste the code into a new window, start Bridge - Edit - Preferences - Startup Scripts, click the "Reveal" button. This will open the folder that the script should be placed. Once that has been done close and restart Bridge and accept the new script. You will now have a new menu item "AlphaSort"
#target bridge
if( BridgeTalk.appName == "bridge" ) {
var newMenuSort = new MenuElement( "menu", "Alpha Sort", "after Help", "mySortData" );
var newSortCommand = new MenuElement( "command", "Alpha Sort", "at the end of mySortData" , "xxxx" );
newSortCommand.onSelect = function () {
   alphaSort();
function alphaSort(){
var file = new File(app.document.presentationPath +"/.BridgeSort");
if(!file.exists){
    alert("Please select manual sort and move one document before running this script!");
    return;
file.hidden=false;
file.open('r');
var data = file.read();
file.close();
data = data.split('\n');
var Items=[];
for (var a in data){
    if(data[a].match(/item/g)) Items.push(data[a]);
app.document.sorts = [{ name:"file-size",type:"dimensions", reverse:false }];
Items = Items.sort();
try{
file.remove();
file.open("w", "TEXT", "????");
}catch(e){alert(e+" - "+e.line);}
$.os.search(/windows/i) != -1 ? file.lineFeed = 'windows' : file.lineFeed = 'macintosh';
file.writeln("<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>");
file.writeln("<dirinfo>");
file.writeln("<files>");
for(var s in Items){
    file.writeln(Items[s]);
file.writeln("</files>");
file.writeln("</dirinfo>");
file.close();
file.hidden=true;
app.document.sorts = [{ name:"user",type:"date", reverse:false }];
app.document.chooseMenuItem("mondo/command/new");
app.documents[0].close();

I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about so I don't loose any of my photos/keywords? Wh

I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about: so I don't loose any of my photos/keywords? Who can help?

The Bridge General Discussion can give you the specifics of transferring your information over to Bridge CS6.

I cannot get Bridge to open - I get the message that "the operation could not be completed"

I cannot get Bridge to open in my new CS5 Suite - I get the message that "the operation could not be completed." Photoshop comes up fine, but no Bridge. I have a MacBook Pro. Thanks.

I am having the same issue.
MacBook Pro, OSX 10.6.4
Photoshop CS5, Bridge CS5
It will not open, I have reinstalled, cleared the cache, & reset preferences, + installed the patch.
I do have Bridge CS3 that came with my PS Elements, & that works. Do not have any Norton, or other software running.

[locked] I downloaded CS4 and cannot get any photos to open up on it

I cannot get any photos to open up in CS4, all I get is a black screen.
I have Vista Business operating system.

On Sun, Jul 12, 2009 at 11:41:15PM -0600, billabongdesigns uttered:
To post a reply to the thread message, either reply to this email or visit the message page: http://forums.adobe.com/message/2102761#2102761
end
Please note: I read this Forums through e-mail. If you respond to me; please
quote, otherwise I have no idea whom your response is addressed to or the
context. This is all thanks to how this forum doesn't work properly, yet.
Regards,
S.D.A. (Stephen)

Bridge CS4-is there a vertical film strip option similar to the one in CS3?

If there is a vertical film strip option in Bridge CS4, I have not been able to find it.
Thanks,
Mogur203

What I did seemed fairly straigntforward: Drag the Content tab from its bottom location up next to the Preview tab, so that Content and Preview are in the same panel. Move the right edge of the Preview/Content panel to the left to create a place for the content (film strip). Then drag the Content tab into this new space at the right; adjust panel width and preview size to suit.

No matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?

no matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?
I have windows 8 and ive tried everything i can to open it but it refuses to let me.

Let's get some information first.
What is your version of Adobe Camera Raw, Bridge, and Photoshop?
What files are you trying to open in ACR? If Raw, for what camera model?

Bridge CS4- Cannot get vertical filmstrip

Similar Messages

Maybe you are looking for