Bridge CS4 gallery not showing in Thunderbird or Chrome

OK, I am using Bridge CS4 - when I make a gallery every things goes just fine, save/ upload etc. But when i go to the url in a Thunderbird or Chrome browser the address reverts to local temp folder on my computer ( - file:///C:/Users/Michael/AppData/Local/Temp/index-4.html - )
If I use Internet Explorer I get the Gallery just perfect.
HELP! Please . .
Here is link of the gallery.
http://www.goldstardads.org/images/Albums/2011GSDBBQ/index.html
Thank You
Michael

It works OK for me on Safari 7.1.2 (Mavericks) - are you using an older version? Try rebooting Safari to clear the cache (or command-option-e).

Similar Messages

***Bridge CS4 will not show a preview of my .CR2 files***

OK...
I have been searching the internet for a couple hours with no luck. Hopefully someone out there can help...
Equipment:
     Cannon Rebel Xti
     Adobe CS4
     ACR Plug-in 5.5 (latest update installed in its CORRECT place!)
When i open Bridge CS4 all my raw or .CR2 files dont have a preview. Im thinking it could be because the adobe website says that my Rebel Xti minimum ACR plugin is version 3.6? But dont all the later versions support it anyway?? So 5.5 should work right?? Im at a loss if you have any insight at all that would be great!!!! Thanks!!!!!!!!!!!!

Hi Robert
Had the same problem this worked for me.
start up bridge go to preferance/advanced and tick the selection Generate Monitor size previews.
Regards
Tony

Photoshop CS4 Is Not Showing all Formats/Extensions when saving. [was: Please Help]

My Adobe Photoshop Cs4 Is Not Showing all Formats/Extensions.
when i edit a picture and wants to save in .png or .bmp or in any other format ...
there is no .png In the Save As List, There are only Some Extenstions in that list like Jpeg-Psd-Tif etc...
I Made The Picture in RGB mode..
And I have Png.8bi Present In my AdobePhotoshop/Plugins/File Formats
But It Is Still Not Showing Can you guys help

Thanks For The Reply ... Let Me Answer your questions
Os = Windows ( windows xp )
Bits = 8 bits / Channel
I didn't Understand your this question
=> If On Windows is it the same in both the 32 and 64 bit versions of Photoshop cs4?
System Info :-
Adobe Photoshop Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 1
Processor speed: 1394 MHz
Video Card: Intel(R) 82845G Graphics Controller
Video Mode: 1152 x 864 x 4294967296 colors
Video Card Driver: ialmrnt5.dll
Driver Version: 6.13.01.3264
Built-in memory: 2046 MB
Free memory: 1497 MB
Memory available to Photoshop: 1586 MB
Memory used by Photoshop: 70 %
Image cache levels: 4
Serial number: 92628791954238016438
Application folder: D:\CS4\Photoshop CS4\
Temporary file path: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 39.1G, 32.0G free
Primary Plug-ins folder: D:\CS4\Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2008/08/27-18:10:41   53.355610   53.355610
   AdobeLinguistic.dll   Adobe Linguisitc Library   4.0.0
   AdobeLM.dll   AdobeLM   3.0.11.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   AdobeLM_libFNP.dll   FLEXnet Publisher (32 bit)   11.5.0.1 build 57427
   AdobeOwl.dll   Adobe Owl 2008/08/14-18:38:42   2.0.70   53.354161
   AdobeOwlCanvas.dll   Adobe Owl Canvas   2.0.70   53.354161
   AdobePDFL.dll   PDFL 2008/08/20-20:15:08   53.204060   53.204060
   AdobeUpdater.dll   Adobe Updater Library   6.0.0.1452 (BuildVersion: 52.338651; BuildDate: Wed Apr 16 2008 19:28:20)   52.338651
   AdobeXMP.dll   Adobe XMP Core   4.2.2   53.352624
   AdobeXMPFiles.dll   Adobe XMP Files   4.2.2   53.352624
   AdobeXMPScript.dll   Adobe XMP Script   4.2.2   53.352624
   adobe_caps.dll   Adobe CAPS   2,0,99,0   2.135373
   AFlamingo.dll   AFlamingo 2008/07/09-11:28:44   53.350580   53.350580
   AGM.dll   AGM 2008/08/27-18:10:41   53.355610   53.355610
   ahclient.dll    AdobeHelp Dynamic Link Library   1, 3, 12, 0
   aif_core.dll   AIF   1.0   53.352475
   aif_ogl.dll   AIF   1.0   53.352475
   amtlib.dll   AMTLib   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   amtservices.dll   AMTServices   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   ARE.dll   ARE 2008/08/27-18:10:41   53.355610   53.355610
   asneu.dll    AsnEndUser Dynamic Link Library   1, 6, 0, 8
   ATL80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   authplay.dll
   AXE8SharedExpat.dll   AXE8SharedExpat 2008/06/11-20:19:53   NFR 53.348206   53.348206
   AXEDOMCore.dll   AXEDOMCore 2008/06/11-20:19:53   53.348206   53.348206
   Bib.dll   BIB 2008/08/27-18:10:41   53.355610   53.355610
   BIBUtils.dll   BIBUtils 2008/08/27-18:10:41   53.355610   53.355610
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2008/08/27-18:10:41   53.355610   53.355610
   data_flow.dll   AIF   1.0   53.352475
   ExtendScript.dll   ExtendScript 2008/07/17-13:28:24   53.351316   53.351316
   FileInfo.dll   Adobe XMP FileInfo   4.2.2   53.352624
   FNP_Act_Installer.dll   FLEXnet Publisher (32 bit)   11.6.0.1 build 60959
   icucnv36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223
   icudt36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223
   image_flow.dll   AIF   1.0   53.352475
   image_runtime.dll   AIF   1.0   53.352475
   JP2KLib.dll   JP2KLib 2008/06/11-20:19:53   53.100857   53.100857
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   mfc80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80CHS.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80CHT.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80DEU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ENU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ESP.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80FRA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ITA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80JPN.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80KOR.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfcm80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   MPS.dll   MPS 2008/07/07-10:33:04   53.350311   53.350311
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS4   CS4
   Plugin.dll   Adobe Photoshop CS4   CS4
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   1.0.0.73
   PSArt.dll   Adobe Photoshop CS4   CS4
   PSViews.dll   Adobe Photoshop CS4   CS4
   registration.dll   Registration   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   SCCore.dll   ScCore 2008/07/17-13:28:24   53.351316   53.351316
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   VersionCue.dll   Adobe VersionCue   4.0.0.0client1
   WRServices.dll   WRServices Friday May 30 2008 7:18:42   Build 0.7713   0.7713
Installed plug-ins:
   ADM 3.11x01
   Accented Edges 11.0
   Angled Strokes 11.0
   Bas Relief 11.0
   Chalk & Charcoal 11.0
   Charcoal 11.0
   Chrome 11.0
   Colored Pencil 11.0
   Conté Crayon 11.0
   Craquelure 11.0
   Crosshatch 11.0
   Cutout 11.0
   Dark Strokes 11.0
   Diffuse Glow 11.0
   Dry Brush 11.0
   Embed Watermark 3.0
   Film Grain 11.0
   Filter Gallery 11.0
   Fresco 11.0
   Glass 11.0
   Glowing Edges 11.0
   Grain 11.0
   Graphic Pen 11.0
   HDRMergeUI 11.0
   Halftone Pattern 11.0
   Ink Outlines 11.0
   Lens Blur 11.0
   Lens Correction 11.0
   Liquify 11.0
   Mosaic Tiles 11.0
   Neon Glow 11.0
   Note Paper 11.0
   Ocean Ripple 11.0
   Paint Daubs 11.0
   Palette Knife 11.0
   Patchwork 11.0
   Photocopy 11.0
   Plaster 11.0
   Plastic Wrap 11.0
   Poster Edges 11.0
   Read Watermark 3.0
   Reticulation 11.0
   Rough Pastels 11.0
   Save for Web & Devices 11.0
   ScriptingSupport 11.0
   Smudge Stick 11.0
   Spatter 11.0
   Sponge 11.0
   Sprayed Strokes 11.0
   Stained Glass 11.0
   Stamp 11.0
   Sumi-e 11.0
   SuperPNG 2.0
   Texturizer 11.0
   Torn Edges 11.0
   Underpainting 11.0
   Vanishing Point 11.0
   Variations 11.0 (11.0x001)
   Water Paper 11.0
   Watercolor 11.0
Plug-ins that failed to load: NONE
Flash: 0
Installed TWAIN devices: NONE

Bridge CS4 will not Launch

Recently I tried to upgrade my Mac G4 Tower from OS 10.4 to OS 10.5 and it failed, even though I met all requirements. I had to reinstall 10.4 and now Bridge CS4 will not launch. It worked fine before. I uninstalled PS CS4 and reinstalled it, I tossed prefs & cash files, I reset prefs but still no luck. Any suggestions before I strip down the whole HD and start from scratch?
gardon4

Any suggestions before I strip down the whole HD and start from scratch?
My first go would be to buy a new HD and replace this with your current in
the G4 and give a clean install of 10.5 to try if it will work.
If you downgraded without a clean install from scratch you sure will end up
with conflicting settings for applications.
You could try to back up all custom settings, actions, tools etc and then
deactivate the suite with erase serial number.
Then find the clean tool for Adobe
http://www.adobe.com/support/contact/cs5clean.html
and run this script, it says CS5 but to my knowledge it also finds files for
the CS3 and CS4 suite. Do a search for any adobe files from user and system
library and delete those also. Then install the CS4 suite again.
But again to be honest, you are using a computer that in current digital
terms dates from the 'stone age' and in now way can cope with the needs for
the use of digital files nowadays. It might be wiser to try and find a used
MacPro (or even a used iMac with intel processor) that will give you much
more profit in speed, disk space and processing instead of investing more
time and money in new disks and install procedures...

Bridge CC is not showing Indesign CC 2014 file previews

Bridge CC is not showing previews of InDesign CC 2014. I don't see an update for Bridge anywhere. What am I missing?

Welcome to the forum,
Not sure if it's the issue or if it will help, but you could try purging the cache, etc..
http://helpx.adobe.com/bridge/using/adobe-bridge-workspace.html
Restore preferences
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.
If that does not help, you may try searching the Bridge forum or asking there.
http://forums.adobe.com/community/bridge

Favicon does not show up on Google chrome and firefox with new muse release. Opera showing favicon ok.

Favicon does not show up on Google chrome and firefox with new muse release when exporting HTML or publishing with FTP. Opera showing favicon ok. Previews Muse release was working fine.
this website was created with one update back BK Foto
this one page was updated with latest updated Muse and after publishing with FTP through Muse favicon does not show up Paslaugų Era | Foto Video Paslaugos

Export your HTML and then Just edit index.html with any text editor look for sentence <link rel="...................................>
Then delete all this sentence and copy this one
<link href="//PATH/favicon.ico" rel="shortcut icon" type="image/x-icon">
PATH = Where you have your favicon.ico
I usually copy the favicon.ico in the folder images so the sentence will be like this
<link href="//mydomain.com/images/favicon.ico" rel="shortcut icon" type="image/x-icon">
i hope it helps you
Sorry about my english, my spanish is much better
Juan Pedro Avila

Need help installing Bridge CS4 gallery in DW CS4

I've spent days trying to find out how to put a gallery I created in Bridge CS4 into Dreamweaver CS4. Bridge created a folder filled with a lot of files, including image files and an index.html file. How do I insert these into my DW page? I'm fairly new to Dreamweaver and need the specific steps laid out for me. Thanks.

Greetings,
Copy the entire folder to your web root in the Dreamweaver CS4 and create a HTML page from your template, name it "gallery" then open the Dreamweaver CS4 if not already opened, click to open the files of your website at the right hand Corner of the Dreamweaver CS4 page or windows > files to open it; search for the folder of the gallery open it and copy the .swf player file to the space you have created on the gallery page save the page then press F12 on your keyboard or file > preview in browser and choose your browser to view your gallery. You could resize it after all that. It worked for me on my new web design. Good luck.
Best regards,
Brigma.com

Bridge CS4 will not update to Camera Raw 5.7 on one of my computers.

Bridge (CS4) will properly display my Nikon NEFs (from my Nikon D3 & D3S) on my old Mac Pro (Lion 10.75) but only the NEFs from the D3 are displayed on the exact same program on my MacBook Pro Retina - Mavericks).
I have followed Adobe's instructions perfectly, over and over again, but no matter what I try (and I did try some variations) I cannot update from Camera RAW Preferences.Version 5.0.0.178 on the MacBookPro Retina.
The Camera RAW preferences Version on the older Mac Pro computer's identical copy of Bridge CS4 is Version 5.7.0.213.
I tried opening and installing a download of Camera_Raw_5_7.dmg from Adobe and I also tried dropping in the Camera Raw plugin file from the older computer but nothing works. I have emptied the cache several times.
I dont know if this is significant but when I first started trying to do this, I could not find the Plug-Ins folder in the Adobe file on the MacBook Pro Retina, so I copied the one from the Mac Pro's Adobe folder.
Please help. I can only use Bridge on my older desktop computer because of this problem.
Thank you.
Jan

Well, Jan, over the years I've helped many Mac users with this precise problem, and I even posted screen shots showing the path to the correct plug-in folder for ACR. However, in your case all those images won't help and I won't be able to generate new ones for you for one simple reason: I do not use Mavericks and never will because my Mac Pro desktops cannot go above Lion, FORTUNATELY. Mavericks is still cr@p at this point.
All I can do is try to clarify a few misconceptions for you:
AutoMatters wrote:
…I read that about the root level library when I first tried to follow the instructions from Adobe and I thought that I was doing exactly that. Instead of the library associated with my name, I found the library associated with my hard drive. I suspect that I have not yet even seen the root level library…
Jan, that is the ROOT LEVEL Library.
Getting back to your advice, I do not understand what you mean by mounting the .dmg file as if it were a DVD or external hard drive.
I mean just that. A Disk Image file (.dmg) is a virtual disk, like a virtual DVD. You double click on that file in the Finder and it will then mount just as if you had inserted a DVD into your computer. It will then show you the contents it carries. I will not be at my computers for a few weeks, so I can't be sure about all that the Disk Image for that update shows; but somewhere in there will be the ACR Plug-in. That's what you need to copy from the Disk Image to your hard drive and install it in its correct location, NOT THE BLOODY .dmg file, for goodness sakes!
Do you understand that once you are at the ROOT LEVEL Library you DO NOT go to the Plug-ins folder therein? Read the instructions again. What you want is to continue the path through the Application Support folder /Adobe / Plug-ins / etc.
This old screen shot may help. Command or Control-Click on the thumbnail to see the full image in a new window, then scroll horizontally; it is a VERY wide image:
Also, if I delete the Plug-ins folder that I copied from my other computer's installation of Bridge CS4. Should I reinstall the entire CS4 suite from the original disks and start all over again. If so, I read somewhere that I will need to somehow deactivate my serial number from the products as installed on my MacBook Pro so that I may reinstall it.
Delete anything you may have copied yourself only if you are 100% sure what that is. But DO NOT REINSTALL ANYTHING without first uninstalling using the Adobe UNINSTALLER that was installed in your Utilities folder inside your Applications folder.
Whatever possessed you to go around copying folders from a different Mac OS version? ??? That is insane! Geez…
Why the heck do you keep talking about Bridge? ??? !!! Bridge has absolutely NOTHING to do with the installation of ACR. NOTHING!
ACR is installed at the OS level and can be hosted indistinctly by Photoshop or by Bridge from the same location.
Bridge is totally out of the loop in this discussion, just as it is when you are using ACR hosted by Bridge. All Bridge does is call upon the appropriate application, whether this be Photoshop, Adobe Camera Raw (ACR), Illustrator or even Microsoft Word and hand it the file, period. You could use ACR for years without ever launching Bridge, even without having Bridge installed. Ever.
Irgendwie vermute ich, daß Deutsch Deine Muttersprache ist. Oder irre ich mich?

Bridge CS4 Search Not Displaying NEF Files + Keyword Problems

Hello, I am hoping someone can be of service to peculiar problem that apparently nobody else has had.
I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar
file.
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF
file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw. I quit the program and the next time I started Bridge, it crashed upon using the loupe tool. I looked up help on Adobe's website and it appeared I had corrupted preferences. Per Adobe's instructions I option clicked at Bridge startup to delete the preferences and purge the cache.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of
photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
I then verified and repaired all disk permissions from the operating system installation CD and Bridge started returning results as
usual. However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Now I'm noticing that all my search results are not including NEF files; just JPEG and the occasional DNG file that I made through Adobe Camera RAW. I'm not sure if this has been the case throughout my problem or if I just noticed it late.
Regarding not displaying NEF files in searches, it appears that it will default to displaying JPEG if it has the option because as of lately I have only been shooting RAW and some of those files are showing up in the still-wonky searches (still displaying random or no photos of keywords.) However, if I manually navigate to a file, I can open and edit NEF files with no problem, they just don't display in any search modes.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.

I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
Snow Leopard and Bridge CS4 do have some issues. Some have no problems and others have much problems I'm afraid.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar file.
To my knowledge the keywords are written into the XMP Metadata that is saved in the IPTC section of file itself, the XMP data in the sidecar file contain the changes you made in ACR. In other words, the keywords you have added should still be there.
Also see this Knowledge Base article about Keywords:
http://kb2.adobe.com/cps/402/kb402660.html
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%.
Changes metadata in prefs only affects the visability of the fields in the metadata panel. put or deselect a checkmark in front of an option will let you see or not see the field in this panel, the actual data and fields ar still in the file.
it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw.
You can change the magnification for the loupe to 100 / 200 / 400 and 800 % using the scrollwheel or with loupe active the + and - keys. Bridge shows the settings that you made in ACR. If you have changed the default Camera Raw setting it will also change the thumbs for this file. A thumbs needs some time to be cached. First it shows with a black border around, when first cached it shows the embedded preview and in the second round it renders the ACR settings and High Quality preview (if you have not disabled this setting). Caching needs some time.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
Maybe you need to let the indexing in find do its work again but it might also be a snow leopard issue. Try an other app (Digital Asset Management like Expresion Media or Portfolio) to check about the keywording and find. You can use a trial version for several days. You have several options to use find keywords. In the panel itself, in the filterpanel uner the keyword tab, when clicking on a visible keyword it only shows the files with that keyword or in the menu Edit / find (shortcut cmd + F) explore the options in this menu and also choose include non indexed and let Bridge start to index your files again.
However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Don't know about that.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.
As you can see the black border around some file that disappear after a while or when you select them they have not been cached. You used purge cache so most of your earlier cached results are gone and need to rebuild.

HTLM Web Gallery not showing pictures

When I upload from Bridge the web gallery it doesn't show the pictures? Yet, when I export the HTML web gallery to my hard drive it does. Any ideas?
Thanks,

Jim:
Welcome to the Apple Discussions. By not showing up do you mean the gallery is no longer listed in under the Gallery section on the left of the pictures in the gallery are showing a blank window with an "!" in the middle?
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Adobe Bridge CS4 will not launch ACR

I'm getting this message when trying to open an image from Bridge CS4 in ACR,
"Camera raw requires that a qualifying product has been launched at least once to enable this feature"
Any ideas how to cure this, I've downloaded the update 5.2.2., what is the correct location for this? Automatic update is just opening a box withe file in and I cant find the previous.
By the way ACR opens fine from Photoshop CS4.
Thanks
Philip James

Philip:
This has been discussed in the Camera Raw Forum: you may need to install the new ACR 5.2 plug-in in the correct place manually.
Eric Chan, "ACR 5.2 not installing in CS4" #1, 30 Nov 2008 9:17 am

Web Gallery not showing up in iPhoto

I've set up multiple albums through the web gallery feature and successfully synced them to my .mac account. The problem: one particular gallery shows up on the .mac account but not in iPhoto anymore so there is no way to manage it/add to it/delet it??
thanks

Jim:
Welcome to the Apple Discussions. By not showing up do you mean the gallery is no longer listed in under the Gallery section on the left of the pictures in the gallery are showing a blank window with an "!" in the middle?
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

My adobe bridge CS4 is not displaying fullscreen photos well?

being a photographer and graphic designer the quality of displaying photos are very important to me, so the problem is that my adobe bridge CS4 for mac when i display photos in full screen, their quality is very bad when it fit to screen, but when displaying it in original size which is larger than my screen's resolution "2560 x 1440 px" its quality is perfect! what can i do?!
i want them to be in high quality and sharp! :S
i have tried edit>>preference>>advanced then Enable generate monitor size preview.....but no change, still the preview SUX
note that i have 27 inc big screen with res. of 2560x1440 px.....which is sometimes a big problem for me :S

yeeeey, just resolved it
after going to edit>>preference>>advanced then Enable generate monitor size preview, i had to clear the cache then to regenerate the previews
in the preference, just go to cache, and click on the button "purge cache" to delete all the cache for previously saved previews.....and voila, done
thnx for those who read

ACR 5.7 can see camera profiles in Bridge CS4 but not in Lightroom 2.7

When utilizing ACR5.7 through Bridge CS4 - the cameral profiles are easily applied for my .NEF files (Nikon D300) but when I am in Lightroom 2.7 the camera profiles are not available unless I convert the nef to DNG. I have tried to search the web and these forums but I am unable to locate the answer to my problem:
Why can't I see the camera profiles in Lightroom for my nef files when I can see them through Bridge.. (both running ACR 5.7)
Windows XP xp3
Lightroom 2.7
Bridge CS4
ACR 5.7
Nikon D300 profiles
Thanks for the help.
NGG

For those who might be reading this and having "odd" problems .. my solution was to delete my preferences file.
http://lightroomers.com/replacing-the-lightroom-preference-file/745/
This solved several odd issues I was seeing in my lightroom including the camera profiles..

APERTURE GALLERY NOT SHOWING IN IWEB WIDGET.

It happens if you have published Photo gallery with exactly the same name of a Video Gallery with Aperture 2.1. iWeb09 Widget does not show the PhotoGallery with that name.
Just rename it and ... it will be there to drag into your web page.

Sorry I posted this as question but it should be as a bug.

Bridge CS4 gallery not showing in Thunderbird or Chrome

Similar Messages

Maybe you are looking for