Bridge CS4  Not enough room on destination disk, when Getting Photos from Camera

When trying to "Get Photos from Camera" after the 2nd or 3rd photo has been moved to folders I receive a box that states:
The backup destination folder is low on disk space, and could not obtain all files from the device. (which is a compact flash card) Please select a different folder or cleanup disk space and try again.
Please note there is plenty of space available on both drives that the photos are being saved to.

Mike
what Ramón says,
I use Downloader on a daily base and don't have troubles with it. And yes it is not a very brilliant piece of software but it does work.
I would suggest that you go to the user library/ preferences and in here find the downloader plist file. drag this to the trash, restart photodownloader (now at factory settings, you need to reset it again to your wishes) and try again.
btw
in an other thread Scott showed an other application for image ingestion. It looks very great but you need to pay a small fee for it :-)
Scott Burns - 9:20am Mar 5, 09 PST (#4 of 5)
Have you taken a look at ImageIngester?
http://ImageIngester.com/

Similar Messages

  • In ADOBE BRIDGE CS6 "folder can not be created" appears when getting photos from camera

    Has anyone seen this when getting photos from camera in ADOBE BRIDGE CS6?
    "Folder cannot be created"

    I solved the problem myself.
    jwerth2

  • I got a new ipad mini and chose to set up as a copy of my iPad.  Didn't sync the music on however as it is a smaller model, not enough room.  Now trying to get some pictures and music on.  Chose some pictures that were not in iPhoto, got a message that I

    I got a new ipad mini and chose to set up as a copy of my iPad.  Didn't sync the music on however as it is a smaller model, not enough room.  Now trying to get some pictures and music on.  Chose some pictures that were not in iPhoto, got a message that I could only sync with one library, chose cancel, and apply and it downloaded my pictures anyway.  Now trying to sync some music but just get "The iPad “Linda’s iPad” is synced with another iTunes library. Do you want to erase this iPad and sync with this iTunes library?"  So I hit cancel.  Have tried several times, same thing. What can I try?

    You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.

  • Bridge 'get photos from camera' stopped working and Bridge won't recognize my DNG files anymore

    So, I've got Bridge set up to get pictures from mem.card whenever I insert one in my laptop (win. 8.1). A week ago I installed Sony's PlayMemories. Without asking me it hijacked Bridge's task of getting pictures from my cards. What's worse, I tried to fire the 'get photos from camera' function manually from Bridge. Bridge starts working, but nothing happens. I uninstalled PlayMemories and reset Bridge, also told my laptop to run Bridge whenever I insert a card. Still nothing happens and I still can't get the 'get photos' function to run manually from Bridge. Anyway, I can still rund the DNG converter to get my pictures, but today Bridge won't recognize my DNG files - worked fine yesterday. I downloaded CS6 from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html  and tried to run the installer, but it doesn't seem to do anything. Maybe I need to do a full uninstall off CS6 for it to do anything..?  Anyway, if any of you guys could help me with my Bridge/CS6 issues I'd be grateful.  I've got 3 sets of concert photos and a snowboard comp. shoot I need to finish this week 
    CS6 running on windows 8.1

    Re-install of PS CS6 resulted in the following errors:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s), 1 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
    ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{C41A769E-27ED-44F7-8A11-F2E32F538E05}\_249_92e651345849 4a10e8de711f4c5be8e5" to "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Proximity\11.00\araphon.env" Error 1392 The file or directory is corrupted and unreadable.(Seq 251)
    ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 251)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
    This doesn't really tell me much, anybody else got a clue what this is...?

  • Get photos from camera option in Bridge CS5

    I really would like to use the "Get photos from camera" option in Bridge CS5, as it would save me a few steps in my normal workflow (dowload images from my Canon 40D with EOS utility, convert to DNG, delete CR2 files, update metadata with copyright information), but when I try with with a large number of images, some RAW images are not downloaded and converted. All jpg images are downloaded. So I would get e.g. images 1.dng, 1.jpg, 2.dng, 2.jjp, 3.jpg - in othere words the 3.dng file would not download. Any help would be most sincerely appreciated.
    BTW - when I use the Canon EOS Utility, all files get downloaded, but then these are all cr2 files.
    I use Windows 7 64-bit as my OS.
    My thanks in advance.

    On further testing, it appears that the download function works fine as long as the "Convert to dng" function is left unchecked. So the file loss occurs during the conversion process. I have looked but cannot find an answer - is there a way to batch convert downloaded cr2 files to dng from within Bridge? Or does one have to load up the DNG Converter separately?

  • Bridge- get photos from camera... no valid files found

    I am using Photoshop CS3 on a laptop with Windows Vista and a Canon 30D camera.
    When I go to Bridge > File > Get photos from camera > select Canon EOS 30D, I get the message 'No Valid Files Found'
    What are the possible causes? There are raw files on the CF that have not been downloaded yet. This is my first attempt at downloading the photos through Bridge. I normally use the Can EOS Utility.
    Thanks for the help.
    Dale

    edit: first answer deleted because this way of copying files was stated in your original post already, sorry.
    If you are able to copy one way or an other the RAW files to a folder on your PC then point Bridge to this folder and that should be working, Try also to purge cache for that folder and renew Bridge preferences.
    I use Mac and don't know the correct way to install ACR on a PC. Have you checked the plug in info in PSCS if your ACR version is shown in the list?

  • "Operation not supported by backend" while getting photos from camera

    The situation is as follows:
    I'm trying to copy photos from camera using a file manager (thunar in this case). The attempt fails with a message "Operation not supported by backend".
    Configuration:
    uname: Linux xxx 3.9.6-1-ARCH #1 SMP PREEMPT Fri Jun 14 08:12:55 CEST 2013 x86_64 GNU/Linux
    libgphoto2 2.5.2-1
    gphoto2 2.5.2-1
    gvfs 1.16.3-1
    gvfs-gphoto2 1.16.3-1
    thunar 1.6.3-1
    mount info for this case:
    gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=100)
    What is known:
    Everything was fine on 2013/06/13 - I was performing successfull copying operation on the day.
    The exactly same message started to appear on a different machine running Arch, with both unupdated Nautilus from 2.x line and latest pcmanfm. No other machines were tested.
    Only copying and moving files/directories via file manager doesn't work. I can browse the camera and delete files and directories with no problems.
    I can copy the files using cp (via gvfs mount).
    I can grab the files using gphoto2 from command line.
    Applications are able to open the files with no problems (via gvfs mount).
    Downgrading gvfs, gvfs-gphoto2, gphoto2 and libgphoto2 to versions from before 2013/06/13 doesn't fix the issue.
    Logs are clear.
    First I suspected that something is wrong with gvfs or libgphoto2, but I'm able to use them with no problems, as long as I don't try to copy a file via file manager. This could mean something is wrong with the file manager, but the issue suddenly affected three different file managers on two independent machines. And the logs remain silent. I have no idea how to deal with the issue.

    mpan wrote:Usable workaround, not requiring additional tools, was posted in the first post: use cp on mounted partition or gphoto2. The problem is not how to retrieve the files, as this is obvious, but how to copy them using file manager or how to trace source of the problem.
    Stupid me. Yes, you mentioned that. Sorry.

  • "Get Photos" from camera function will not reopen

    I love the new "get photos" function in Bridge CS3. However, I try to use the function to retrieve some photos and send to a folder, then wish to reopen it to send more photos to a different folder (photos from different events on card). The function will not reopen without first shutting down photoshop and bridge (and sometimes rebooting the computer). How do I get this function to work properly?

    Don't know if I do it properly, but I use the autoload function of the USB port. So I send some pictures to a folder, and then to send other pictures to another folder I unplug card reader and replug and start over selecting files. Kind of retarded, but don't do it too often so get by.

  • Advanced Dialog button not showing during "Get photos from camera or card"

    Based on previous threads, I have double checked my screen resolution (currently set at 1920x1080) and uninstalled/reinstalled PSE 8.  I run on Windows 7.  Has anyone has success getting the Advanced Dialog button to appear?

    A little experimentation shows that your Windows display text-size setting (DPI, dots-per-inch) is set too large, probably 150%. When I set my display to 1920 x 1080, I can set the text size to as large as 140%, but any larger and the Advanced Dialog button won't show.   To change the text size, right-click the Windows desktop, select Personalize, Display, Set Custom Text Size (DPI), and then enter a different value.
    PSE 8 has an undocumented "feature" that disables the Advanced Dialog when it won't fit on the screen.  This commonly occurs on netbooks with display heights less than 768, but it appears to happen also when the combination of display resolution and DPI make the dialog too big to fit.   Lazy programming on the part of Adobe.

  • Photos deleted when trying to import to Iphoto when not enough room.

    I have tried to download my photos from my camera to Iphoto.  I clicked 'delete photos when downloaded'.  I had an error message that there was not enough room in Iphoto.  When I went back to the camera, all my photos have been deleted.  HELP!

    first off - do you have a backup of your iphoto library (you should - if you do not you will lose all of your photos sooner or later - along with all of your other files) - computers, software and people fail and a backup is your only defense
    Second - how much free space do you have on your disk drive that has the iPhoto library on it? YOu should always have at lease 10GB free - more is better
    third in the future never have iPhoto (or any other computer program) delete your photos - import them and properly disconnect your camera/memory card and wait for at least one backup cycle and then use the reformat command on the camera to reformat you memory and erase the photos
    For now you probably can recover your photos using a media recovery package like media recovery - http://freshcrop.com/  AFTER you resolve the space issue - until you do that do not use your camera at all or your computer anymore that necessary to resolve the space- depending on what damage has been done due to lack of disk space using the computer may make things worse
    An external drive is probably the fastest and easiest way to resolve the space issue -
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

    Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

    Nope. It just opened the installer and stayed in the same loop.
    It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
    Eveything was working fine until the mountain lion failed install.

  • The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )

    My iMovie Keep Saying "The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )" How Can I Fix It?

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Keep getting 'not enough room' on ipod when trying to copy from iTunes.

    Hi,
    With 60G iPod connected to PC, and iTunes automatically set to sync, I keep on getting 'not enough room on 'users-j' to copy all the requested files - even though I have plenty of disk spaces on the ipod.
    I have tried the following:
    - reset the ipod
    - restore the ipod to factory setting and erase all previous songs
    - selected to use as disk
    - tried manually to copy and automatically to sync
    - updated ipod and also using iTunes 7.0.2.16
    Still get the same msg with all of the above. And not a song gets successfully copied over. I had previously 355 songs in the ipod (before restoring).
    Any suggestion/help is appreciated.
    Thx. Jack.

    Thanks for that, deleted some music, to get 3Gb, then it copied over fine.
    The amount left seems wrong though as now only have 0.2Gb free? It was this that was the issue though, as tried again on another movie and it copied across, just strange on the amount free, maybe time for my iPhone to be wiped clean to start again?
    cheers

  • Web Gallery in Bridge CS4 not working

    I've just started using the Web Gallery function in Bridge CS4. The output previews just fine, and loads perfectly from local disk in my browser. When I upload to my webspace, I get just a blank page.
    I have contacted my ISP, who say that the problem lies with the Index.html file. They have run it through a validator at W3.org, and it comes back with multiple errors. i have no idea how to fix these errors, and in any case can't understand why it loads just fine from my hard drive, but not from my webspace.
    Has anyone here had a similar issue?
    Thanks

    Yeah, and I don't see a 'show file names' box on the templates I've looked at.
    What I did was go into the group.xml file and I could find the TITLE tags and changed those to what I wanted for my caption.
    Still seems somethings not right, since I had to manually add them.

  • Time Machine took 5Hours just to tell me there was not enough room!

    I had to use T.M to restore my computer just recently and it did but when I logged into my computer and T.M did it's daily or hourly backup it had to reindex everything cause of a restore I did so that took 5 hours but it failed after the preparing stage cause not enough room due to older backup (I only had one backup at the time) My HD for T.M is 40GB so is my internal drive where the OS is on. So what I did was just use disk utility to wipe out the T.M drive and when I did that cause it was now a empty drive I guess the reindex only took less then 10 seconds why is that? Apple should fix this that when your computer freezes, power offs or restore that it should not reindex and cause me to reformat/erase the Time Machine Drive just to make it work cause know I lost my old backup bummer. Does this happen when you use the T.M drive onto other computers running OS X 10.5?

    I should add this is not the first time I had this issue so it's not 10.5.2 problem.

Maybe you are looking for