Bridge CS4 slideshow limitation

I am trying to do a flash slideshow in Bridge CS4 in Windows. I viewed the tutorial, it seemed simple enough. However, whenever I try to do it, there is a limit of only ten files. Even if I drag fifteen or twenty files into the slideshow window Bridge only accepts 10. Anybody else had that problem?

Don't have CS4, but in CS3 there is a limitation to display 10 images in preview window, but don't follow how that applies to a slideshow. Perhaps CS4 is different, but why not just do a sideshow by clicking on that option, no dragging necessary?

Similar Messages

Bridge CS4 Slideshow & Tripod web hosting

I have not been able to fully open the slidshows I have created in Bridge and ftped to 'Triod' where my website is hosted.
[Please no snickering over my web site being on Tripod.]
I have contacted Tripod but have not received a response so far. I have tried the HTML slideshow as well as the 'Lightroom Flash' version. I can't get either to properly work.
I have gone into the files and made sure that the jpg file names were not too long, and things were in lower case, and that kind of thing.
Needless to say, when I open the slideshows in Dreamweaver, they work.
If anybody has an inkling as to what might be happening, and how to fix it, I would appreciate it.. I am not proficient enough in code to figure this one out.
Many thanks!

Yeah, and I don't see a 'show file names' box on the templates I've looked at.
What I did was go into the group.xml file and I could find the TITLE tags and changed those to what I wanted for my caption.
Still seems somethings not right, since I had to manually add them.

How do I make a PDF Slideshow from Bridge CS4 with 500 images?

Every year I go for an extended photo shooting trip. I use about 400 to 600 of the images to make a PDF slide show. This worked fine in all previous versions of Bridge, but no longer works properly in Bridge CS4. I can create PDF files with up to 329 images, but when I try to make a PDF file with more than that, the PDF file is corrupted. Sometimes, the PDF file opens, but about 10% of the image at random location are corrupted, and their thumbnails show up as white or black patches. At other times, the file does not open in Adobe Reader. I get a variety of error messages. The most common is #109.
Just to be certain it is not caused by my images, I used 550 images I had used to make a PDF show last year with Bridge CS3. I get the same problem. The slide show created last year with 550 images in Bridge CS3 still works in Adobe Reader, ruling out the Reader a being the cause of the problem. It appears that some bug has crept into the CS4 Bridge code.
Unfortunately, a while ago a deleted CS3 from my hard drives without making a copy of the downloaded dmg of CS3, so I can no longer re-install CS3. BTW, other than this bug, I am very happy with CS4. As a photographer, I find the improvements made in CS4 ACR stunning.
Is there a known work-around for this bug?
Is it likely to be fixed in an upcoming update?
Is there a way I can download a copy of CS3 allowing me to install CS3 Bridge, or, if needed, the whole CS3 suite?
(I still have a record of my CS3 registration code.)

I found an answer to my own question. A work around of sorts.
Download Photoshop Elements 6 for Macintosh. With PSE6 I made a slide show with 550 images 1920x1200, without thumbs. I ran into one problem making the slide show. My images contained 4 images which had not ben created by Photoshop and could not be included in the slide show. Opening the images in Photoshop CS4 and re-saving them still did not make then acceptable. Not a big deal. I probably could have fixed the four images by stripping all EXIF data before opening them in Photoshop. BTW, PSE6 made the slide show in demo mode.
I hope the bug in Photoshop CS4 will be fixed in Photoshop CS5.

Bridge CS4 and Multicore usage?

Hi everyone-
I build a new machine a few months ago and am now in the process of reshuffling the hard drives as I underestimated the size of the archive. The current specs of the machine are:
Core i7 920 (stock)
12 GB RAM
Main drive: Seagate 1.5TB 7200rpm 7200.11
Archive drive (new one): 2TB WD Green
Photoshop/Bridge CS4
One area that is particularly slow is Bridge when importing files. Most of the files are from a 1Ds MKIII, so it takes a while to generate previews. The photos get added to the slideshow fairly quickly and the thumbnails are extracted in pretty fast time as well. However, it takes a while for the full res previews to generate. For example, in a directory mix of about 7.5gig worth of 1Ds MKIII files and 1D MKII files, the machine currently takes close to 8 minutes before the previews are generated. I looked at the processor usage once and it never goes over 20%. Thinking my hard drive may be slow since it wasn't a CPU bottleneck, I installed 2 OCZ Vertex drives in a RAID0 configuration, moved the photos and cache onto that drive, but ended up seeing the same performance when the previews were generated. (the files were added to the slideshow and had the thumbnails extracted much faster however.)
My question is does Bridge support multiprocessors like the Core i7? It appears it doesn't based on my results but perhaps there is something wrong with my setup.
Thanks for any help,
Chris

Schlotkins wrote:
One area that is particularly slow is Bridge when importing files.
My question is does Bridge support multiprocessors like the Core i7? It appears it doesn't based on my results but perhaps there is something wrong with my setup.
Thanks for any help,
Chris
Hi Chris,
How are you importing the files?
Bridge and Camera Raw both support multithreaded operations. If you are using the 'Get Photos from Camera...' menu option than you are hitting a non-threaded process. That menu item calls a new process and it is not multithreaded. It's there for mounting peripherals that otherwise don't mount via Explorer and one way for ingesting images from a camera.
If you are speaking of just browsing to files and getting cached data, what setting do you have under Preferences> Advanced? If you have Generate Monitor-Size Previews on, what size is your monitor resolution? And you are not talking about using the Loupe for 100% in the Preview panel, right?
I haven't broken down the overall size to image count; approximately how many images are we talking?
regards,
steve

Adobe Bridge CS4 causes Blue Screen of Death! Help?

Can anyone help?
I keep getting a Blue Screen of Death every so often when I am using Adobe Bridge CS4 and another program, either Photoshop or Bryce or Cinema4D.
When I have been working in the other program for a while and attempt to return to Bridge, the instant I click on the bridge icon in the low taskbar, the PC blue screens and everything dies instantly with no time to read the blue screen or to take a photo of it, never mind do anything useful like save the file I was working on.
I have winXP Pro and an NVidia Ge Force 8800 GTS graphics card. (both are up to date)
I recently got the Adobe updates but there wasn't one for Bridge.
Buckets full of memory: 289GB free on the C drive and I store most (work) things on my F drive which is a terrabyte with 315 gigs free.
Um.... dunno what else to say.
Except: HELP!!!

Well, I don't find that the magnifying glass ability is all that much help to me as often what you see in that magnified area is too blurry to be of any use - my eyes aren't wonderful with small things (including small text - I therefore have the text on all the machines I use set to quite large, browser included) so I like large thumbnails too, and usually I find that the big thumbnails are sufficient for me to find what I want.
So that's not been the cause of my BSOD.
By the way what's "ralentize"? Is it like "pixilate"?
On the BSOD - it sounds to me that there can be more than one cause in Bridge of the BSOD, so it sounds as if Bridge CS4 - is just not stable, period.
The fact that Bridge in CS3 and CS2 worked just fine is a good indicator of this, (to me anyway) as most people seem to be saying so.
I wouldn't like to rely on NVidia's next update fixing this, as I've already updated NVidia once since this began and it didn't help, I now hear that there's now another update out for the NVidia Ge Force 8800 GTS (which is what I have in my PC), so I will be updating that when I get back, but as the last update didn't fix it, I doubt if this one will either, I think it's something that Adobe will have to sort out, but I doubt if they will.
So it looks like those of us with that graphics card are just left without being able to use Bridge properly - if at all.
I've given up on it on my PC and so I'm refusing to use it on my Laptop either, since it would be silly to get so used to it that I can't work without it.
I have tried using Irfanview, but it's functionalitly is comparably limited. So I'm looking out for something else.
I don't at the moment have PhotoshopCS4 on the laptop and as I left the box with the program in it in my room at Uni I can't install it on the laptop with its different Graphics card (although still an NVidia it's a Ge Force Go 6800, not the 8800 Gts), until I get back next week... not that I really want to, if it's just going to crash the laptop like it does the PC.
I do have Corel's Paintshop Pro Photo X2 on here, but I don't use it anything like as much as I do Photoshop, but at least the Bridge or Browser (they call it "Organiser") on that doesn't kill the entire computer, although it does take up room on the screen instead of opening as a whole new window.
Also PaintShopPro does not save an inferior version of the image when saving as BMP, which I've noticed does now happen with Photoshop CS4 (when comparing .psd or pspimage with bmp).
emirkill,
I will also try the "enable software rendering" when I get back, that you've used, in case that helps.

Review mode in Bridge CS4

Hello.
When I switch to Review- or Full Screen mode in Bridge CS4, the screen just turns gray, the images doesnt get displayed.
Does anybody know how to fix this?
Regards
Mads Hansen - Denmark

Hey Ramón.
What details do you need about my setup. And is there some easy way to copy them to a file?
Here's the setup details of my Mac and my video card:
Computernavn: Power Mac G5
Model: PowerMac7,2
CPU-type: PowerPC 970 (2.2)
Antal processorer: 2
CPU-hastighed: 2 GHz
L2-buffer (pr. CPU): 512 K
Memory: 6.5 GB
Bushastighed: 1 GHz
Boot ROM-version: 5.1.4f0
VideoCard:
ATI Radeon 9600 Pro:
Chipset-model: ATY,RV350
Type: Skærm
Bus: AGP
Kortplads: SLOT-1
VRAM (i alt): 64 MB
Producent: ATI (0x1002)
Enheds-id: 0x4150
Revision-id: 0x0000
ROM-revision: 113-A13601-126
Skærm:
SyncMaster:
Opløsning: 1920 x 1200 @ 60 Hz
Dybde: 32 bit farver
Kernebillede: Understøttet
Hovedskærm: Ja
Dublering: Fra
Online: Ja
Quartz Extreme: Understøttet
Rotation: Understøttet
Skærm:
Status: Der er ikke tilsluttet en skærm
Hey Lance!
The image i use is regular jpg-files on my internal disk. I get Thumbnails, but nothing in slideshow or review mode.
How do I sent you the images?

Bridge CS4 Search Not Displaying NEF Files + Keyword Problems

Hello, I am hoping someone can be of service to peculiar problem that apparently nobody else has had.
I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar
file.
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF
file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw. I quit the program and the next time I started Bridge, it crashed upon using the loupe tool. I looked up help on Adobe's website and it appeared I had corrupted preferences. Per Adobe's instructions I option clicked at Bridge startup to delete the preferences and purge the cache.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of
photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
I then verified and repaired all disk permissions from the operating system installation CD and Bridge started returning results as
usual. However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Now I'm noticing that all my search results are not including NEF files; just JPEG and the occasional DNG file that I made through Adobe Camera RAW. I'm not sure if this has been the case throughout my problem or if I just noticed it late.
Regarding not displaying NEF files in searches, it appears that it will default to displaying JPEG if it has the option because as of lately I have only been shooting RAW and some of those files are showing up in the still-wonky searches (still displaying random or no photos of keywords.) However, if I manually navigate to a file, I can open and edit NEF files with no problem, they just don't display in any search modes.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.

I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
Snow Leopard and Bridge CS4 do have some issues. Some have no problems and others have much problems I'm afraid.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar file.
To my knowledge the keywords are written into the XMP Metadata that is saved in the IPTC section of file itself, the XMP data in the sidecar file contain the changes you made in ACR. In other words, the keywords you have added should still be there.
Also see this Knowledge Base article about Keywords:
http://kb2.adobe.com/cps/402/kb402660.html
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%.
Changes metadata in prefs only affects the visability of the fields in the metadata panel. put or deselect a checkmark in front of an option will let you see or not see the field in this panel, the actual data and fields ar still in the file.
it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw.
You can change the magnification for the loupe to 100 / 200 / 400 and 800 % using the scrollwheel or with loupe active the + and - keys. Bridge shows the settings that you made in ACR. If you have changed the default Camera Raw setting it will also change the thumbs for this file. A thumbs needs some time to be cached. First it shows with a black border around, when first cached it shows the embedded preview and in the second round it renders the ACR settings and High Quality preview (if you have not disabled this setting). Caching needs some time.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
Maybe you need to let the indexing in find do its work again but it might also be a snow leopard issue. Try an other app (Digital Asset Management like Expresion Media or Portfolio) to check about the keywording and find. You can use a trial version for several days. You have several options to use find keywords. In the panel itself, in the filterpanel uner the keyword tab, when clicking on a visible keyword it only shows the files with that keyword or in the menu Edit / find (shortcut cmd + F) explore the options in this menu and also choose include non indexed and let Bridge start to index your files again.
However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Don't know about that.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.
As you can see the black border around some file that disappear after a while or when you select them they have not been cached. You used purge cache so most of your earlier cached results are gone and need to rebuild.

Why is the Bridge CS4 Output Workspace an Exception?

OUTPUT is the only one of eight Bridge CS4 workspaces that does not return to its default configuration upon choosing "Reset Workspace" (although it does do so for the "Reset Standard Workspaces" option). Is there a rationale for this peculiar exception?

Maybe they thought the user would want to keep his own configuration for further output.
That module is pretty limited though – I think it's a work-in-progress that was rushed out to meet the stupid marketing deadline.

Canon 60D files can't be opened in Bridge (CS4 version); Camera Raw 6.6 has key features missing

I am a Mac user (latest OS) and had been using Camera Raw from Bridge CS4 (part of my Elements 8 bundle) to edit my raw pictures from Canon RebelXTi. I upgraded to a 60D, downloaded the pertinent Camera Raw plug-in, but my raw files still wouldn't open in Bridge. I purchased Elements 10, thinking that would solve all problems, but apparently Bridge and Camera Raw are no longer part of the package! I downloaded the latest Camera Raw patch for Elements 10 (6.6), and I can now open raw files from Photoshop, but the Camera Raw version is not full featured and Bridge still can't open my 60D files. How can I get the full version of Camera Raw back AND have my 60D files opened? I deleted Elements 8, but not Bridge, and I can still open raw files from my Rebel in the earlier full version of Camera Raw. When I check in Elements 10 preferences, only Camera Raw 6.6 shows up, so that should be correct. Any ideas?

The full-featured ACR with Elements loophole has been closed in the newer Mac Elements, I believe. Us PC folks never had Bridge with Elements or haven’t for many versions, already , so have already been limited in RAW processing with Elements. Adobe finally “fixed” the Mac version, too, I think.
For full-featured ACR and Bridge you’re supposed to pay for Photoshop. Perhaps Lightroom, that is half the cost of PS, and has all the adjustments of full-ACR and you could still link PSE as a final editor step of ACR-type adjustments aren’t enough.
An alternative is to convert your CR2 files to DNGs and then they’ll open in older versions of ACR, like the one that came with PSE 8, assuming you can still install that.

Slide show transition in Bridge CS4 not working

Putting together slideshows in Bridge CS4 I can not get the slide transition to work, no matter what timing I set for 'duration.'
I have tried opening it in several different browsers, but no dice. Also my slides are jpgs at 72 dpi - so, rather small.
Any help would be appreciated.
christian

You have to update bridge separately from PSE, and bridge ships with a pretty old version of ACR. Just go to Help>Updates in bridge and it will update itself for you.

RAM issues/questions with Bridge CS4

Hi,
I've become a little perplexed with Bridge CS4. I constantly get an "out of memory" error with bridge when working with many large files (21 megapixels) through adobe camera raw, despite having a bullet proof system. First, some system specs:
Vista 64-bit
Intel i7 3.2GHz processor
12 Gb of 1600Mhz RAM
Dedicated separate scratch disc
This computer just freakin rips!
So photoshop (the 64 bit version) just runs like a breeze, despite vista being its stupid self and taking up about 1.6 gigs of ram just for the OS. However, I am mainly wondering that if Bridge isn't a 64 bit program (it is installed in the x86 program files. Only photoshop is installed in the 64-bit program files) then maybe it can't utilize the extra ram over 4 gigs? If so, then it is severely crippled and limited to the 4 gig ceiling shared with the RAM thirsty OS.
Does anyone actually know and have any answers? I know the "out of memory" error has long been discussed but never seems to come to some solid conclusions. And really, there is no reason why bridge should be out of memory on a 12 gig system with 9 of those just sitting free when it say its supposedly "out of memory".
Any ideas?
Thanks

If I remember correctly the window's paging file is set to a discrete size, believe recomended 1.5 x ram size. If Bridge is running in 32 bit mode guess you only need 6 gig paging file, but would more do anything? How large is it, is it on a seperate partition? Also consider this:
If a paging file resides on a partition that contains other data, it may experience fragmentation as it expands to satisfy the extra virtual memory that is required. An unfragmented paging file leads to faster virtual memory access and to a greater chance of a dump-file capture that is free of significant errors.
Is fragmentation a consideration?

Photoshop CS4 - File Type Associations and Bridge CS4

I have both Photoshop CS4 and Photoshop Elements 7.0 installed on my PC running Windows Vista Home Premium, I removed Photoshop CS3 after installing CS4. The issue I have is that if I look at file associations in Bridge CS4 under Preferences, none of the file types are set to Photoshop CS4, they are set to either Explorer or Photoshop Elements 7.0. The even stranger thing is also that if I try to change the associations, Photoshop CS4 is not even displayed as an option, as Photoshop Elements 7.0 always is, I have to browse in order to find it. This works, but I find it strange. Also within Windows none of the file associations are set to Photoshop CS4 after installation, I have to change them manually, again by browsing for it. I remember that in previous installs of Photoshop there was the possibility to change or use default file associtions, does CS4 have this? I guess this is not really a problem, but I find it somewhat strange that Elements 7.0 is always offered as an option but not CS4 and makes me feel it hasn't installed properly. Anyone have any ideas?

CCleaner did the trick for me too!
But I still suspect something about CS4 installer is not right.
Under CS3 I used Vista "open with">"choose program">"always use" to assiciate bridge CS3 with my canon camera raw files.. At that time it did work.
After installing CS4, I wanted to do the same with bridge CS4 but it didnt work. In the "choose program" vista menu, whatever I was doing, I couldnt select bridge CS4 it was always comming back to photoshop cs4 or bridge cs3.
After using CCleaner, I could re-associate the way I want right away.
So my word to photoshop's installer developper: please try to reproduce this issue, it should be easy, and make the installer avoid this.
Thanks

Adobe Bridge CS4 will not launch ACR

I'm getting this message when trying to open an image from Bridge CS4 in ACR,
"Camera raw requires that a qualifying product has been launched at least once to enable this feature"
Any ideas how to cure this, I've downloaded the update 5.2.2., what is the correct location for this? Automatic update is just opening a box withe file in and I cant find the previous.
By the way ACR opens fine from Photoshop CS4.
Thanks
Philip James

Philip:
This has been discussed in the Camera Raw Forum: you may need to install the new ACR 5.2 plug-in in the correct place manually.
Eric Chan, "ACR 5.2 not installing in CS4" #1, 30 Nov 2008 9:17 am

How to view individual art board in Bridge CS4?

Hi.
Can somebody tell me how to configure the Adobe Bridge CS4 so that it shows/views/displays individual art boards (that I can scroll thru) and NOT the whole *.ai file (which contains ALL the art boards)?
I want to preview the individual art boards as a larger image, and when they all appear together in the *.ai file, they appear smaller.
At the bottom of this page:
http://www.adobe.com/designcenter/illustrator/articles/lrvid4016_ai.html
it says;
"To view documents, open Adobe Bridge and select an Illustrator document from the Content panel. A larger view of the document appears in the Preview panel located to the right of the Content panel. When viewing an Illustrator file with multiple artboards, click the right-facing arrow below the preview to display each of the artboards."
I do not have this arrow, so therefore no option. On my bridge, all artboards appear together. How do I separate them and get the arrow he is talking about?
TIA.

Interesting, looks like you also need to save the file with Create PDF Compatible File checked in the Illustrator options dialog when saving - the sample files were saved without PDF compatibility, so no individual artboard preview.
I resaved the sample file In the Cradle of the Deep with Create PDF Compatible File checked, and it shows the artboard previews individually.

Can not open Camera Raw in Bridge CS4, or see thumbnails

MacBook Pro
OS 10.5.5
Photo Shop CS4 version 11
Camera Raw 5.2.0.65
I had another version of Camera Raw from PS3. When I bought the Canon EOS 5D Mark II, I deleted the old camera raw plug in, so as to not conflict with the new camera raw plug in.
When I open PS4, click Photoshop, click about plug in, ONLY one version of Camera Raw comes up.
In OS 10, when I click GO at the top, then applications, then Adobe Photoshop CS4, then Plug Ins, then File Formats, I get two Camera Raw icons: a blue lego like icon that says "Camera Raw.plugin" and another icon that looks like the Macintosh HD icon, but is labeled "CameraProfiles.dmg"
The problem is that I can't open files in Camera Raw when in Bridge CS4, nor can I see the little photo thumbnails either.
Can someone please help?
Desperate in NYC.

The Photoshop folder is NOT the correct location for the Camera Raw plug-in, since several versions of Photoshop.
The correct location, is, as described in the readme and in the FAQ of this very forum [hint]:
Mac: [root of your hard disk, NOT your user folder's library]/Library/Application Support/Adobe/Plug-ins/CS4/File Formats/

Bridge CS4 slideshow limitation

Similar Messages

Maybe you are looking for