Bridge CS4 wrong kind of document message

Sorry if this has been raised before...I didn't find it looking through the topics.
I have just upgraded my computer and OS to Vista 64. Now any raw files I've downloaded from my 5D Mark II won't show a thumbnail or any metadata. If I click on one, it won't open..."wrong type of document." They had shown just fine on CS3 and any files that I try to open from before CS4 show up just fine. Only files downloaded since upgrading to CS4 fail to work with this new OS. I have tried purging the cache a few times but no luck.
Does anyone know the solution to my problem? Thanks.

CS3 and CS4 are two separate programs on your computer, they do not share files. So check the files on CS4 to make sure you have the latest ACR, and in the right directory.

Similar Messages

  • When openong photoshop cs4- could not complete your request because wrong kind of document

    Hi
    I've just installed the free trial of photoshop cs4.. with much difficulty! Firstly it was saying please install adobe file exe? which I don't have a clue how to do. But I managed to install photoshop and thought I was getting somewhere, but now it keeps popping up with couldn't complete your request because it's the wrong kind of document? It allows me to go into photoshop but I can't seem to do anything? Can anyone help?
    I'm a novice with computers so please bear this in mind when you respond. Many thanks

    I found that knowledge-base article and did every step in it...
    I even went beyond... I deactivated CS4, completely uninstalled using AppZapper and then manually went through and tossed every adobe pref file in both users and in system.
    I then reinstalled CS4 from scratch, reactivated, and exact same issue. It happens when running in both the 32, and 64 bit kernel as well.
    It's so odd too... it runs fine for around 40 seconds. I can open a doc, add type, but then that annoying error pop-up comes and it gets stuck in a loop. I can only click on 'OK', which just makes the error window open again. And again, again, etc... you can't escape. The only way to quit is to 'force quit'.

  • NEF "Could not complete your request because it is the wrong kind of document"

    I have just installed Lightroom 12.1 with all current updates on W7 64bit and now cannot open the Nikon D5200 raw (NEF) files. I get the message: "Could not complete your request because it is the wrong kind of document" although they open successfully in Camera RAW on Vista 64bit PC with the same version of Elements. In order to work with them, I have had to convert to DNG and open in Photoshop CS5, which doesn't support D5200 RAW (NEF version).
    This is causing me a serious problem because I need to migrate all of my work to the new W7 system.

    That was the exact wording of the message, and I tried many times with many NEF files; but I just went back to the PC after entering the Forum question and everything works fine. The NEF files open from both my D5000 and the D5200. The pc wasn’t re-booted in the mean time, so I really don’t understand why it works now and didn’t 15 min’s ago!
    I’m sorry to have disturbed you – maybe I should just have gone to lunch and tried again later. – I am a computer specialist/consultant, by the way, so I do know what I’m talking about.
    Regards
    Roy
    Roy Gardner
    Phone: +44 (0) 12 5279 3903
    Mobile: +44 (0) 79 7314 8985

  • Could not open wrong kind of document

    Hi
    This is not really a problem for me but curious to know why and how to eliminate
    New pc--- New "successful" installation of cs6 extended -- No other programs etc in use  -- First (and further)  opening of cs6 displays "could not open your request because it is the wrong kind of document"-- Nothing requested --click ok ( or remove display ) and can continue without any problems  Why and how do i find this document since details are not  not displayed 
    thanks
    bri

    Hi Mylenium
    Sorry about that
    The pc is new and  custom built for photo editing etc .   CS6 extended was indicated as installed" successfully". No other programs were in use and when I opened cs6  the screen  displayed " cannot open your request because it is the wrong kind of document ".   Only by clicking OK to this or removing this display was I able to continue using cs6 without any problems.  If I close down cs6 and then re-open the same ocurrs . Until I remove the display I am unable, to use the browser, say,  to open a file.  However,  assuming cs6 has not been opened and I select a file jpg/ tiff etc from a picture folder and then  " send this file to cs6 "( via a shortcut)  cs6 opens without the previously detailed display  So as I mentioned it is not a major problem for me but I am curious to know why this happens and how such a document, which has not been rquested , might be located and removed
    Hope I have explained better
    Thanks
    Bri

  • "Not the right kind of document" message

    I'm running CS3 under Vista Home Premium. Has worked fine.
    Downloaded ACR ver 4.1 and dropped it into the "File Formats" folder, having removed the old ver 4.0 first.
    I shoot Nikon Raw (.nef).
    Started Bridge. No thumbnails. Read the instructions on blowing out the thumbnail cache. Think I've done that correctly.
    Problem not resolved. When I double-click on one of the .nef files, a message appears saying "Not the right kind of document."
    Have I done something incorrectly?
    Should I uninstall CS3, reinstall, and try to put ACR 4.1 in again?

    Where did you install ACR exactly?
    Read the FAQs and the "Debugging" thread, please.

  • When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, even jpeg files. This is a NEW frustration.

    When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

    Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
    If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
    Also what is the version of ACR in the title bar?
    Gene
    Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved".

  • I had to reinstall CS4 and now have error messages when opening bridge and photoshop

    The error message is "The specified module could not be found. C:\Program Files (x86)\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL

    I tried what you suggested and it did not help.  whenever I try to open either photoshop or bridge, I get a message saying that there was a problem loading scripts the last time that Bridge was open and do I want to try loading them again?  If I click yes, I get that same error message that I reported in my original question and photoshop/bridge will immediately close.  If I click no, photoshop and bridge will open but it will not let me open a raw format document.  It seems like Adobe Camera Raw is not being recognized.   One of the updates I downloaded was an update to Adobe Camera Raw so the functionality is there, it just can't be accessed.  do you think I should try to uninstall and re-install Photoshop again?
    Date: Mon, 3 Sep 2012 19:48:31 -0600
    From: [email protected]
    To: [email protected]
    Subject: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        Re: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
    Go To Help->Updates and install the latest update. It should work.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670793#4670793
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670793#4670793. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Wrong document message

    When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

    A reinstall may help
    Sign out of your account... Uninstall... run the Cleaner...
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
    -using the cleaner after uninstalling and before reinstalling is needed
    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    -Restart your computer... Sign in to your account... Reinstall

  • When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document"  This just started happening today.

    When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document"  This just started happening today. The only thing I have done differently is change my file handling to raw + jpeg on my Nikon 7100. 

    I downloaded camera raw 8.7 and I am now able to open my raw and jpeg files.   Thanks

  • Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

    Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop.  (Same CS5 and plug-ins installed OK several years ago on a Vista laptop.  Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install.  Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."   Any solution?

    CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
    So this means you will have make a list of the updates that failed, go here: Product updates
    and manually download/install from there.
    Gene

  • I cant updated Camera Raw to accommodate my Canon 550D Raw images on CS4 - its saying "Could not complete your request because it is not the right kind of document" HELP!!!

    Ive tried downloading the latest version but then always brings up CS4 and says not the right kind of document...? ive tried going to Updstes in help and says all updated but I have version 5.0.0.178 of Camera Raw

    Adobe Camera Raw did not support the Canon 550D until version 6.1 for Photoshop CS5.
    The best way if you do not wish to upgrade is to download the 8.7 DNG converter and convert your Canon 550d raw files to dng so that Photoshop CS4 can open them in your version of Camera Raw.
    Where to get the DNG converter:
    Camera Raw 8.7 and DNG Converter 8.7 Now available
    How to:
    Camera Raw: How to use Adobe DNG Converter - YouTube
    Gene

  • Bridge CS4's Output update (for Mac) - 'can't install/quit' message.  Can anyone help?

    I am trying to download Bridge CS4's Output update, but get a 'can't install/quit' message when I open the dmg file.  I have checked system requirements, space etc and everything should be OK.  I have been using Bridge CS4 for some years, and for some reason didn't know about the Output add-on.
    I have a late 2012 iMac, Processor  2.7 GHz Intel Core i5. 
    Does anyone have any suggestions?

    Thanks for responding.  I have another similar question out, (by mistake I posted it twice).  I have some options on that so won't take your time.  Again, thanks.
    Sheila

  • Bridge CS4 Shows Wrong Dimension from The Actual One

    I have the dimemsion shown in CS4 but seem that it is incorrect. Ex: My .AI file is infact 80cm x 200cm, but Bridge CS4 shows 24cm x 60cm
    Is there any work-around?

    The problem could be that some files do not have the resolution embeded into the file, so Bridge is working the size out at a set resolution, in Bridge check the resolution alongside the filesize given, and does it compare to your expected size at your expected resolution?

  • Cannot view cr2 files in Bridge cs4 & Windows 7

    I can not convert the cr2 files in cs4      nor read them with new Windows 7      Home Edition 64 bit computer
    Upon      downloading from my camera I am unable to view the images.
    After      downloading the file, when clicking on the file in Bridge to bring it into      Photoshop I get the following message” Could not complete your request      because it is not the right kind of document”
    I am      able to view the images on the media card from the camera.
    I have      contacted Canon and they suggest that it’s a software issue and that I      should  go to the Adobe website and      look for Windows 7 64 updater.
    I was      unable to find anything with this reference but I updated to Bridge 5.7.
    After      trying to see the images after the update I was still unable to view the      images so I logged onto the Adobe Support site and was told that they no      longer support cs4.
    Any suggestions ?

    Keep in mind that if your camera is newer than the last released version of Camera Raw (5.7) for Photoshop CS4, Adobe does provide a free solution for compatibility, as Curt has mentioned, through the use of the free DNG Converter application.
    The way that works is this:
    1.  You get your raw images from your new camera into a folder on your computer.
    2.  You run the latest DNG Converter application and choose the folder.
    3.  It converts the entire folder full of images to .DNG files.
    4.  You open a DNG file as you would an older raw file, with your old version of Photoshop.
    While the DNG Converter provides you a way to continue to use your older Photoshop software with a new camera, keep in mind that there are significant improvements in the raw converter in the latest version of Photoshop that may allow you to make better images out of your raw files if you do choose to upgrade Photoshop.
    -Noel

  • Bridge CS4 one Windows 7 stops working when trying to load pictures in a new file

    Bridge starts fine but when i click on some files to see the pictures in there it stops working.
    The message i get is:
    "Adobe Bridge has stopped working
    A problem caused the program to stop working correctly.
    Windows will close the program and notify you if a solution is available."
    I had problems with my XP x64 and CS4 bridge too and after formatting and installing windows 7 Ultimate (32 bit) i thought it would be solved ... but no such luck.
    Any ideas what to do?
    also not sure where to look for any error logging or something similar.
    Oh having problems with itunes too as it will not start....., yea i know wrong forum but just incase someone has the same problem as i do
    I appreciate your help

    This is what i get from the event viewer:
    Sorry i have no idea what to look for
    System
    Provider
    [  Name]
    Application  Error
    EventID
    1000
    [  Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2010-02-06T01:28:23.000000000Z
    EventRecordID
    3309
    Channel
    Application
    Computer
    Workstation
    Security
    EventData
    Bridge.exe
    3.0.0.464
    48b75dac
    unknown
    0.0.0.0
    00000000
    c0000005
    041b15e1
    d8c
    01caa6cba0a860a8
    C:\Program  Files\Adobe\Adobe Bridge CS4\Bridge.exe
    unknown
    ea035ed1-12be-11df-9400-001fd08134a0

Maybe you are looking for

  • How many apps can be open at one time?

    My friend did not know how to close apps. I showed her and was shocked at how many she had open at one time. Everything since she got her ipad over a year ago. She must have had 30 games, pictures, internet, lists, contacts, mail, video, everything w

  • Buiding my first web site

    Hi i'm trying to build my first web site using Dreamweaver MX. Could anyone please point me in the right direction

  • Assigning an Internal Order to a Purchase Requisistion

    Hello, Probably not an ABAP question but I have noticed that most(if not all) question regarding PR's are directed here. Anyways my question is quite simple, is there a way to assign an Internal Order to a Purchase Requisition. I know there is an Acc

  • Alv field with string

    hi, I HAVE A TABLE IN WHICH ONE FIELD SAY F1 IS OF TYPE STRING I HAVE CREATED AN ALV REPORT IN WHICH THIS FIELD F1 IS editable when i press save button it ads the new row in the database the Problem lies here is that the output length is viewed only

  • When i sign in to my icloud account my contacts arent there

    how do I sign in to my icloud account and see all the photos ive taken on my phone???