Bridge CS5.1 metadata show wrong "Date Created". It is always June 1, regardless of file examined.

Bridge CS 5.1 metadata shows incorrect "Date Created". It shows June 1, no matter when the file was actually created.

smilin Mike wrote:
…The purge cache operations…
Try always to Purge the Cache through the Tools Menu in Bridge. The global Purge Cache has been broken for years, at least through Bridge CS4. Don't have CS5.
Wo Tai Lao Le
我太老了

Similar Messages

Bridge CS6 occasionally displaying wrong 'Date Created' for .NEF's

I noticed this problem only recently, and this the third time it happens (that I know of).
Sometimes my Bridge puts a wrong Date Created (not Date File Created or Date File Modified) on a NEF RAW file, whilst the next one (taken perhaps just a few seconds or a minute later) has the proper date. Strangely the Date File Created & Modified do show the proper creation date.
Example to clarify:
Metadata viewed on my D90 itself
Photo 1 taken on: 30/09/2013, 9:03:26 PM (DD-MM-YYYY)
Photo 2: 30/09/2013, 9:07:52 PM
Photo 3: 30/09/2013, 9:08:12 PM
Photo 4: 30/09/2013, 9:08:34 PM
Photo 5: 30/09/2013, 9:08:54 PM
Photo 6: 30/09/2013, 9:09:34 PM
viewing in bridge:
Photo 1: Date Created: 30/09/2013, 9:03:26 PM
               Date File Created: 30/09/2013, 9:03:26 PM
               Date File Modified: 30/09/2013, 9:03:26 PM
Photo 2: Date Created: 30/09/2013, 9:07:52 PM
               Date File Created: 30/09/2013, 9:07:52 PM
               Date File Modified: 30/09/2013, 9:07:52 PM
Photo 3: Date Created: 23/09/2013, 7:42:02 PM
               Date File Created: 30/09/2013, 9:08:12 PM
               Date File Modified: 30/09/2013, 9:08:12 PM
Photo 4: Date Created: 30/09/2013, 9:08:34 PM
               Date File Created: 30/09/2013, 9:08:34 PM
               Date File Modified: 30/09/2013, 9:08:34 PM
Photo 5: Date Created: 04/09/2013, 10:14:45 AM
               Date File Created: 30/09/2013, 9:08:54 PM
               Date File Modified: 30/09/2013, 9:08:54 PM
Photo 6: Date Created: 04/09/2013, 10:15:06 AM
               Date File Created: 30/09/2013, 9:09:34 PM
               Date File Modified: 30/09/2013, 9:09:34 PM
As you can see, it's not a 'stable' deviation.
I could live with it, apart from one problem: the batch rename function only has 'Date Created' as option for renaming with date.
It's also quite annoying for my photography study, since my teachers might get confused by the wrong date in the Metadata when I turn my photo in.
I tried compacting the cache whilst my camera's SD card wasn't connected (so the files aren't 'available' anymore), no difference.
Another thing I tried was to hook my SD card up on a different computer, same result.
So it might be my SD card, but that doesn't explain why the correct date is shown on my D90 itself, though.
If anybody here has an idea how to fix / avoid this problem, help is much appreciated.
Greetings,
Alex

I have never inserted the 8GB card in the D3000 before just a minute ago.
And I just took 7 rapid photo's of my previous post (~1s interval)
All 7 displayed actual date in my camera, the first 4 displayed a wrong date in bridge (24/09/2013, times; 2:12:16PM, 2:12:20PM, 3:09:24PM and 3:10:26PM). Last 3 displayed proper time in bridge.
So yea, I'm pretty sure something is wrong. I'll try formatting the SD card (as suggested before) but however you look at it, this doesn't add up.
edit:
Well I figured out one thing: if I view the photo's directly on my SD card through bridge, it shows the same date for Date Created, Date File Created and Date File Modified.
Quite logical, to be honest, since I am viewing the date the file was created on the camera.
However, if I export photo's with Adobe Photo Downloader (or whatever it's called again), it displays the date those copies were created (by Date File Created). Date File Modified is still ~the same as Date Created since it hasn't been modified since the original creation.
edit2:
The formatting seems to have solved the issue, for now anyway. Still have no clue why the SD card got such (occasional) cases of drunkness.

After upgrading to elements 12 the metadata shows incorrect date created?

After upgrading from elements 8 to 12 all the pictures in the album have a new date created in the metadata the is the date I upgraded. this is incorrect because the picture was not created on this date but moved or updated. This is a problem when running things like screen savers that go by date created. How do I fix the metadata to reflect the actual date the picture was created?

After upgrading from elements 8 to 12 all the pictures in the album have a new date created in the metadata the is the date I upgraded. this is incorrect because the picture was not created on this date but moved or updated. This is a problem when running things like screen savers that go by date created. How do I fix the metadata to reflect the actual date the picture was created?

Invoice table sold to party show wrong data

Dear All
While creating excise invoice in background sold to party show wrong data.
In invoice ship-to-party andsold-to-party display correct but when we check
in J_1IEXCHDR table ship-to-party and sold-to-party display same data.
After upgrading support packs this problem came.
Regards
Pyneri

Hi
Refer this
Re: can anyone tell me in which table is sold-to-party name stored
Regards
N Ganesh

Aggregate table showing wrong data

Hello Gurus:
I am working on an issue, where a report is showing wrong value for an aggregated fact table.
If I try not including it in query, then results work fine. But by default BI server is pointing to aggregate table ( which it should ).
So my questions are
1) Does Aggregate tables are refreshed automatically with DAC?
2) I know data is wrong in aggregate table. How do I verify?
3) How to make a particular report hit regular table instead of aggregate table?
Please let me know.
Thanks.
~Vinay

Alright. So I made some progress on this issue, HOWEVER it is still not solved.
1) Aggregated tables are refreshed daily with DAC. There is a script for that on server which is created using Aggregate Persistence wizard.
2) ONLY one column is showing wrong data. I have verified this using Toad. However I dont know why is it showing wrong data. Theoretically it should be fine.
3) this question is still same.
How to make a particular report hit regular table instead of aggregate table?
Please help me out.
Thanks.
~Vinay

Bridge CS5 not showing contents of .ase files

Bridge CS4 showed the contents of ase files but Bridge CS5 just shows the .ase icon, can you help?

We have a machine with a fresh install and Bridge had not been opened. Same result as the rest of you guys. It works in CS4 (Mac & Win).
It's not in the "File Type Associations" of CS4 or 5, but they still work in CS4....weird.
There is an update to CS5 v4.0.3 out now. I installed it on a fresh CS5 install and it still doesn't work. I think they may have taken the feature out or something.
I'm not finding any evidence of it being a bug necessarily.

Report showing wrong data

Hi Gurus,
When we are generating report in the answers in one column it is showing wrong data from where i have to start for this issue.
Thanks,
Rafi

Pull that column alone,run report, compare the results with your manual query, and also compare the physical query.
if all are good then try to add other column from any other dim and then do the same as above
repeat till you know the cause.
Pls mark if helps

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

P2 ingested footage with wrong date created metadata

Hello, we're trying to standarize all of the media for our systems. Part of this includes ingesting P2 footage using Prelude and encoding it as DVCHDPro quicktime files. I know that the recommended method that adobe gives for ingesting P2 footage is to keep the file structure in tact and use the media browser function of Premiere; this, however, doesn't suit our company's needs of maintaining a relativaly NLE-agnostic media library and having quicktime compatiable discrete video clips of all our media. We're using Mac OSX operating systems, by the way.
The problem is that, when using Prelude to ingest, it seems that Prelude obliterates the "date created" metadata and file data (e.g. when selecting the "get info" on the clip itself; that file data). After ingesting a clip, if I open it in Premiere, there is no date-based metadata that matches the original record time on the .mxf file itself. Nor when I view the clip in OSX's "get info" does the "date created" panel reflect the date that the original file was created. It seems that it should be possible to write the original "date created" data to the ingested file (in the ingest panel in Prelude I can see the correct "date created" time); FCPX is able to do this when ingesting P2 media using their systems. Is there an option that I'm missing or is this simply not possible with this version of Prelude?
To illustrate: here's a screencap of the ingest panel in prelude, notice the "date created" column reads 2013-06-28T11:43:05; which is the correct record date of that clip:
However, after I ingest the clip, both within Premiere and the "get info" panel in OSX, the "date created" now refers only to my import time:

Thanks both for your responses. I checked the .mxf file "date created" and it is indeed empty (see picture).
The "date modified time" however, is correct. I do understand that when dragging media directly from the media browser in premiere that the metadata displays correctly; what I think should also happen is that when the footage is ingested and transcoded via Prelude, it should also display correct metadata. As shown in my pictures above, prelude does indeed see the correct "date created" (wherever it gets that information); it just obliterates it after it transcodes the clip; it's not available either in the "get info data" (which, somehow, FCPX does do when importing P2 media through their system) nor (most strangely) in premiere. Any settings or changes that could be made to address this would be appreciated.

Metadata templates overwrite 'Date created'

I've experienced this frustrating problem for years but now need to do something about it.
I have a metadata template which I apply to my pictures but everytime this action is performed I'm left with the creation date of the images changed to the date that I created the template (3 years ago)
This problem has been present through all versions of Photoshop that I've used from CS2 to CS5.
Does anyone know why this happens and if there is a way around it?

Have you checked your template for Date Created?

Bridge CS5, metadata searching and video previews

Hello everyone, my first post here and I'm hoping to receive a little assistance or a point in the right direction.
Here's a brief history of my issue. I'm a military videographer assigned to a new unit and I am trying to build a video library. I'm shooting with a Sony EX1 and completely tapeless -- which is new territory for me. As I increase the size of my video library I'd like to utilize Bridge as a method of searching for, previewing, and retrieving video files. Bridge certainly seems capable of performing all those tasks; but I am having issues.
To begin with, it seems the tags I place on a .mp4 in Premiere Pro (PP) using the Project Panel don't appear in Bridge. What I mean by this is if I place keywords on a clip in PP and then search for those keywords in Bridge no search results are returned. I figured maybe the issue is the keywords are only useful within PP, although I thought those keywords were saved as metadata with the .mp4 file. I relented with using PP to log my video clips and instead tested out OnLocation (OL). Using OL I noticed some of the metadata I placed on my .mp4 files did show up within the Metadata Panel in Bridge but when I attempt to perform a search I only get results if I am within the folder the .mp4 exists in. If I am in a parent directory to the folder the .mp4's directory is in then I get zero search results.
I thought I might be able to work around this issue by using the Sony software that came with my camera called Clip Browser. With this program I can save some basic metadata such as title, creater, and description but again when I attempt to search for any of that information in Bridge, I get no query results.
Ideally what I would like to be able to do is use PP to log metadata for my .mp4 clips and store those clips in directories based on categories (i.e. Training, Aircraft, Personnel, etc.) Then whenever I needed to find a certain kind of shot, perform a quick Bridge search based on keywords or caption information to retrieve the footage I want. I'm uncertain whether I have stumbled upon an issue with cross-communication between the programs concerning metadata or perhaps I am missing a step or doing something else incorrectly.
Finally, as great an idea as I feel I have, the whole thing is a wash currently because I cannot preview any .mp4 within the Bridge application. I simple get a movie icon and no playback. Linking back up with the grand-scheme, after I search for a clip I'd like to be able to preview the results in Bridge to pick the best footage from the available clips.
My post is a little long and I hope somewhere in there I detailed my issues clearly. I appreciate any help anyone can offer. Thanks for taking your time to respond.

Several issues here, so will try to address them, and welcome to the forum.
1. I have never used Premiere Pro, but believe it uses a database for the keywords, while Bridge writes the keywords to the image. In the case of a RAW file, and perhaps video files it writes them to an XMP file. I believe there is an option in PP to write the metadata to file rather than database, and then Bridge can read it.
2. For the search to work the folders must be indexed. This occurs when you visit the folder, or you can force the issue by clicking on the box "include non-indexed folders". Also the search goes from the start position and goes down the directory tree, so you need to start the search above where you want to search.
3. Preview of mpeg files is still a problem. Adobe staff from PP has entered the fray as using the K-lite codec package is causing problems in PP and other Adobe programs. Herfe is the link to the rather long discussion. It is still ongoing. http://forums.adobe.com/thread/652660?tstart=30

Icloud online cal shows wrong date?

the online icloud calender is showing the wrong date. events created on my iphone 4s for the saturday are moved to the friday ( day before) when i move them on the online calender back to the saturday they then move on the phone to the sunday so basicly the icloud online is a day behind. Any Help? Cheers

At icloud.com , click the cloud icon at top left in any application, then click your name at top right in the next pane. Set the time zone to what it should be.

Downloads with Safari show wrong date

Hi, this is my first post and I'm stumped.
When I download a file (i.e. PDF) via Safari on either my Imac or Macbook (4.03 and 4.02) both running Leopard 10.5.7 it shows up in my downloads folder with the wrong date: wrong year, month, and day.
When I download the same file with Firefox the download date is correct.
Does anyone have any suggestions to remedy this annoying problem? Thanks.

Ok. I just downloaded a PDF via Safari that shows the creation date as: 23/12/08 1:10 AM.
Same file downloaded via Firefox shows date correctly: today at 9:16 PM.
The date from Safari has been all over the map... 03, 07, 00 etc. all different.
Message was edited by: i-Mack

Can LR 4 use Bridge CS5 Metadata Templates?

I have generated approx 30 + Metadata Templates in Bridge CS5 and I want to see if I can speed up my work flow when working in Lightroom 4.
So I suppose the question is ; is it possible to achieve the apparent impossible or is there a solution?
Thanks in advance

Does anybody know where they go?
Try this document from the Adobe Knowledge base:
http://kb2.adobe.com/cps/828/cpsid_82893.html
It is about PS and I can't find one for Bridge but it might be a guide to the location because that would be probably the same. I am a Mac user so can't confirm this myself

Bridge CS5 won't let me create Smart Collection

Hi all -
I am working with CS5 on a PC (Windows 7 Professional/64-bit) and Bridge will not allow me to create a Smart Collection. We want to use Bridge to sort graphics based on the type of graphic they are. We added keywords to the files and can use the filter to sort, but it would be nice if anytime a "timeline" keyworded graphic was added to the folder that it was added to that collection.
I go to the Collections panel, and click on the "Smart Collections" button, fill in my criteria, but when I hit Save nothing happens. All I can do is cancel out of the window. I have tried it on a couple different computers in my office and they all have the same issue. Same thing occurs if I do a search and try to hit the Smart Collection button there, nothing happens. It rolls over, but no action occurs when I click on it. Am I missing something here?

Have all of your Folders been properly Indexed in Bridge?
Select the Parent Folder which holds image files on each of your HDs;
Go to Tools / Cache / Build and Export Cache . . . Export Cache to Folders; and check the box to Export Cache to Folders.
This operation may take quite a long time (you might choose to leave it running over-night) but once done, I think that you will find that making Smart Collections from Keywords works really quickly -- even when files are scattered in multiple folders over many different HDs.

Bridge CS5.1 metadata show wrong "Date Created". It is always June 1, regardless of file examined.

Similar Messages

Maybe you are looking for