Bridge CS5 and Illustrator batches

Hi
Can I run Illustrator batches from the Bridge (CS5), or is it only Photoshop batches that can do this?  If I go to Tools>Photoshop, there's a bunch of options, including Batch…, but under Tools>Illustrator there's only one option, Live Trace….  If I want to run a batch that doesn't involve Live Trace, can I do it from the Bridge or do I have to run it from Illustrator?

The additional functions that are under Tools for Ps, Ai & Id are provided by 'Bridge' start-up scripts (You can turn these on/off). These are samples wrote by Adobe. There is only the one for Ai but that does not mean that you can't add more… You get a scripting Tool Kit with the suite so you could learn to make your own?

Similar Messages

  • Problem with Bridge CS5 and Tools Photoshop Batch

    When I select several images in Bridge CS5 and go to Tool>Photoshop>Batch and try an run an Action, I receive an error message asking for the Install disk. Bridge at that point freezes until I put in the install disk and then it runs the batch action fine.
    This is very annoying as I always have to have the disk in my DVD Drive.
    Any points would be welcomed.
    Thanks,

    Go to preferences/startup scripts and make sure there is a check mark for Bridge and Photoshop scripts.

  • How  can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

    How  can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

    Nah. Raw support is version specific and that extends to Bridge as well. Older versions simply won't handle new cameras. If this is important to you, you will have to use Bridge CC.
    Mylenium

  • Adobe Bridge CS5 and CS6 need to uninstall

    I have Adobe Bridge CS5 and CS6 that I need to uninstall off my mac I do not have Adobe Uninstall in the Utilities folder. Question how do I uninstall the applications

    Question how do I uninstall the applications
    CS6 uninstall is in the folder of Photoshop itself in the applications folder, I suspect CS5 also has this but can't check myself.

  • I have Adobe Bridge CS5 and Output is blank

    Hi, I am supposed to be making a contact sheet using output in Adobe Bridge CS5 and when I go to output module is NOT working.  I contacted Adobe support and they said they couldn't help me but to come here.  Can anyone please help me?  I have an assignment that I need to get finished! 
    Thank you so very much,
    Heather Mullin

    Thank you Robert.  I just tried that and output still doesn't show up.  I haven't used Bridge since I got this version.  I think it is not there. I have heard of this happening in CC  and there are answers.  People have had trouble with CS5 as well but I can't find an answer.  Thank you for trying!  I appreciate it so much!

  • Bridge CS5 and indexing on a Server

    Maybe I'm way of base here, but I've used Bridge CS3 to successfully index files on a network server and it remembers the indexing (a library of stock photography) But now trying this with Bridge CS5 and each time I have a search (file or keyword) it starts to index the server from scratch, what is the dealo? Am I asking too much of Bridge should i be looking at a different solution, btw the server is running Microsoft Exchange Server 2003,(which is a pain)

    property tPermissions : "777"
    property dpath : POSIX path of (path to desktop)
    set tFolder to do shell script ("date +%Y%m%d") -- Master folder.
    set sFolders to {"a", "b", "c", "d", "e", "f", "g", "h"} -- List of sub-folders.
    do shell script ("mkdir -p " & dpath & tFolder & "/{" & sFolders & "}/") -- Create all folders.
    repeat with i in sFolders
    do shell script ("chmod " & tPermissions & " " & dpath & tFolder & "/" & i) -- Set sub-folders permissions.
    end repeat

  • Color in both Bridge CS5 and ACR look yellow.

    The color in my images are all yellow.  I've seen some posts but so far no answer to the problem. Can anything at all be done to fix this problem. It it very, very frustrating. Because it's so yellow I cant use ACR for anything at all.  Please help
    Igor

    Ok, for anyone having this problem with both Bridge cs5 and ACR. Here is what solved my problem. All images were looking yellow both in bridge and Camera Raw, so after I did a back up of my harddrive as a System Image all problems were gone! I have no idea what happened, but now the colors are just fine. The problem corrected itself. So, there you have it. Problem fixed.

  • Need to redownload Photoshop CS5 and Illustrator cs5

    My computor crashed the other day and i lost everything. I had to buy a new computer and I need to redownload photoshop CS5 and Illustrator CS5

    You can download the trial version of the software using the link below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.
    CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  • Photoshop and Illustrator batch commands missing in Bridge CS6

    Photoshop and Illustrator commands missing (eg batch and Live Trace) in Bridge CS6 tools, but they are there in CS5.
    Any thoughts
    much appreciated regards
    Tim

    So I deleted/uninstalled all versions of bridge then photoshop, but Bridge would not even install with PS cs5 (maybe it never did, there was no option on install).
    In the CS4 suite there was a separate option to install or uninstall Bridge, for CS5 they changed this as combined install with PS.
    There are many options for buying separate applications or combinations (Suite) of Adobe Products but according to the Adobe Site Bridge is delivered also with the separate applications Indesign, Illustrator, Flash, Premiere Pro, After Effects and Incopy.
    Usually when having a complete Suite it is delivered with one of those applications.
    Bridge should be able to communicate with all applications from the same CS version, but uses start up scripts for that applications.
    When doing normal installation those scripts should be placed in the correct location automatically.
    Having different suite versions on your system it will not be easy to make them communicate with each other through one version of Bridge (sadly enough you can also have only one version of Bridge active at the time and different versions of Bridge use different cache folders).
    Don't have experience with scripting but maybe the dedicated Bridge scripting forum (link in previous post) can help you out for the answer of customized start up scripts or if it is possible at all.

  • Hex core efficiency in Bridge CS5 and Camera Raw 6.0

    Conclusion: Batch processing of files in Bridge CS5/Camera Raw 6.0 is limited by an unknown factor which I currently believe to be software design and/or software implementation.  While performance on a dual core would be more or less CPU bound, and on a quad core would use the bulk of the available CPU power most of the time, on a hex core machine the CPU is woefully underutilized; i.e. I could be doing the same work in substantially less time.
    Suggestion: At the very minimum, allow the option to have Bridge/Camera Raw process N (where we choose N, given that a dual socket motherboard will be able to have 24 cores in the very near future) files simultaneously, so we can tune our own systems for the disk IO vs CPU bottlenecks we each have.  At best, automatically keep the CPU(s) running all cores at or near peak all the time, or until you run out of disk IO bandwidth.
    Observations taken with the Windows 7 Resource Monitor and the SirReal G15 keyboard applet
    Camera Raw Batch actions:
      When I select a number of photographs (I typically select scores to hundreds), either fresh RAW files from a Canon 50D or existing DNG's converted with prior versions of Photoshop, and apply some change to all of them (for instance: changing from the 2003 Process with ACR 4.6 camera profile to the 2010 Process with the Camera Neutral camera profile, I see very tiny sections of disk IO (not exceeding 20MB/s on a high end SSD), no hard faults/s in memory, no real network IO, and CPU follows a very distinct pattern, with about .75 to 2 seconds at each of the following CPU levels, in sequence:
    18 (one core plus a bit)
    70-88 (5ish cores)
    18-23% (one core plus a bit)
    45-55% (about 3 cores)
    repeat
    A very important feature for me, Bridge CS5 Preview Extractions on a new folder show 33-45MB/s of disk activity, and a solid, exact 25% (1.5 cores) of CPU with dips to 19% or so.  This very clearly indicates that the Preview Extraction feature isn't able to use most of the cores in my processor.
    Build: a new build computer (Gigabyte GA-890GPA-UD3H rev1.0, BIOS F6) with an AMD Thuban 1090T 3.2Ghz hex core (running 5% above clock, FSB change to 210Mhz from the 200Mhz default, Prime95 stable for days), with 8GB of DDR3 RAM, and all Bridge, Camera Raw, and Photoshop cache and files running on an OCZ Vertex Turbo SSD.  OS is Windows 7 64-bit.  OS level page file is completely disabled.

    Is it possible you're overwhelming the main memory bandwidth by the fact that you are working on (multiple) large images?  Multi-core machines can only work on as much data as they can get from/to memory, and what you're doing is kind of flushing data right through the cache.  I'm less familiar with the AMD architecture, but doesn't the concept of 6 cores on one chip mean that they ALL share one main memory buss?  This could be a case where given the task, more cores is not better.
    It may also very well be that the entirety of Photoshop, which is at its core a relatively old application (architecture-wise), is not programmed to use multi-threading as well as it might be.  Getting multi-threading to work right in an application is no picnic.  And don't forget, this software is crafted to build and work in two widely different environments (Mac and PC) and so may not be able to use all the fanciest features of any one of those two realms.
    -Noel

  • How can I download and install PCS5 (i have serial nu) when MacBookPro only shows Bridge CS5 and defaults to CS4?

    I may have inadbertenly deleted CS5 Photoshop in error or it never installed. I had a time when HD was 99 percent full so I started deleting CS3,4 etc Photoshop, Bridege. I remember downloading for this laptop the CS5 for Mac , Bridge, Raw, DNg all that but it was over a year ago.
    Download file shows unable to install CS5 Photoshop not all there (paraphrase). I cannot seem to find support at Adobe web site where downloads are available as long as they have your information. My information is all there.
    I don't understand the new Download Manager but i downloaded it and it seems to deal with creative suite and mobile apps.
    Do I have a conflict with my outdated unsupported Creative suite from pre intel Adobe I think CS7?   I was on phone for long time. the lady couldn't speak good english . She put me on hold after asking twice (two holds) if she could transfer me to tech support. then bumper phone is dead, i.e. i got cut offf. So am on phone again.
    Am almost 70 and do not want to buy a subscription for photoshop to edit when i can live with CS5 and i would like to upgrade LR to match CS5. Everything works on my IMAC since I paid for CS5. It is this laptop I having trouble getting CS5 Photoshop installed.  Do I have to agree to the free Creative Suite trial?  I don't want to shoot myself in foot, i.e. ruin chance to just keep using what I own.  I understand they want us all to pay a monthly subscription for all the applications we paid good money for to keep upgrading. Nice to be able to change rules after ownership.  I wish Adobe hadn't been bought up my sd;fans as it has gone downhill from their logos to their ruining apps like Word did with adding a zillion icons when we all know how to use shortcuts to choose Levels.  I hate the new format it is more confusing. I spent a lot of money learning and loving Photoshop.
    Please help . What do I do?

    Hi,
    I hate to say so, but I'm not far behind you in years. So anyway I'll try and help you out as a user and forum volunteer.
    So let's see if I can properly answer your questions.
    First off, never delete Adobe products on a Mac. You use the uninstaller found in the program folder. Photoshop CS5 for example,
    Use the CS Cleaner to get at those bits the uninstaller missed.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Here the direct download link from Adobe for CS5 Installers.  Mac included.
    http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    If you do not have your serial number at the ready, go here to this link,
    https://www.adobe.com/account/my-products-services.html
    Sign in with the adobe ID and password you registered your products under.
    Under "My Products" You will see what you purchased and a triangle next to it.
    Click on that triangle to see your serial numbers.
    If it is an upgrade, get the serial number from the previous version while you are there.
    That should be enough for you to go on. Any further questions, I'll give it a try.
    Don't worry about Creative Cloud. Adobe might advertise it, but you decide if you need it.
    Gene

  • Different Menus in Bridge CS5 and Bridge CS 5.1

    For some reason the Tools menu has options in the CS5 that are not available in CS5.1 of bridge. Why is that? I'm also missing startup scripts that are discussed in the help files? How can I get the menu commands that are in CS5 into CS5.1?
    I have attached screen shots of my issues. Bridge CS5 versus Bridge CS5.1
    Any help would greatly be appreciated!

    Dear Omke,
    Thanks for the advice but as I said before nothing seem to work :
    first: I'm affraid there is no such thing as photoshop CS 5.5 :
    "Photoshop users, rest easy—-there are no enhancements or new features in this update for Photoshop whatsoever, so Photoshop will remain at CS5, though there is a free patch so it will be able to connect to mobile apps that may be released in the future but just so ya know—-it is NOT a 5.5-level upgrade like the other CS5 products are getting." quote from the Adobe.com site.
    I'm running Photoshop CS5 12.4.0 x 64 : as far as I know the latest photoshop version.
    There is always just one version of bridge or photoshop open.
    Bridge CS 5.1 came with InDesign 5.5. And InDesign 5.5 only seems to work with Bridge CS 5.1.
    I already tried to copy the start up scripts for Bridge via computer (root level, not user account) / library/ application support/ Adobe /Bridge CS5/Startup Scripts  but there seems to be nothing in that file so I revealed the hidden files on my Mac but nothing showed up....
    Now I notice that you suggest another path : computer (root level, not user account) / library/ application support/ Adobe /Start up Scripts CSxx.
    But I don't see any Start up Script file in that location.
    So I'm stuck.
    I need to switch from Bridge CS5 when working with Photoshop CS 5 to Bridge CS5.1 when working with InDesign CS5.5.
    That is not what I paid 749,-€ for !!!
    If this was a restaurant dish with a bug in it, I would send it right back to the kitchen and have the restaurant closed for bad hygenic conditions !

  • Bridge CS5 and hierarchical keywords?

    Hi, folks.
    Just started using CS5 and I'm in the process of adding some keywords.
    I find that when I add a lower-level or subordinate keyword Bridge will not automatically add the upper-level keyword to go with it.
    For example, let's say I'm adding location-specific keyword data.  So, I add "San Franciscio" and I would expect "California" to be added because it's the parent keyword.  But this doesn't seem to be happening.
    Am I missing some button that says "automatically add parent keyword" or something?
    Thanks,
    Greg
    P.S. Oh, and for bonus points, any idea how I grab all the keywords in one image and apply them to another image?  Some sort of a copy-and-dump feature?

    gkphotography wrote:
    Am I missing some button that says "automatically add parent keyword" or something?
    That option is in edit/preferences/keywords.

  • Just installed Bridge CS5 and it is running very slow!

    I am trying to open a folder (in ESSENTIALS / thumbnail view) with 60 jpg files. It is has been running about an hour and they are still not in preview mode.  I've done this many times in Bridge CS2 and all the images would open within a few minutes. I'm not certain of the file size of the individual jpgs but I did change Preferences Do not process files larger than to 2500 MB (the default is 1000 MB). Any suggestions?

    First try the menu tools / cache/ purge cache for folder
    A folder with that amount of files and in jpeg should create thumbs and
    large  high quality previews in less then a few minutes on a fairly fast Mac
    and enough free space on the HD.
    I am trying to open a folder (in ESSENTIALS / thumbnail view) with 60 jpg
    files. It is has been running about an hour and they are still not in preview
    mode.  I've done this many times in Bridge CS2 and all the images would open
    within a few minutes. I'm not certain of the file size of the individual jpgs
    but I did change Preferences Do not process files larger than to 2500 MB
    (the default is 1000 MB). Any suggestions?

  • Bridge CS5 and GPS data

    Hi,
    I want to add a geographical description to my photos (streets names, etc)
    Do you know a practical way to display in Google Earth or Maps the place from coordinates?
    Bridge displays a non standard data format like 54,56.9005W
    At this time I open Earth, create an untitled placemark anywhere in the map, then edit it and copy from Bridge lat and long to placemark description box.
    Then adjust format to 54°56.9005'W, same as lat.  Then I have to manually zoom in and move to find the placemark. No 'display' or something to do it automatically in Earth, only 'directions from here', 'directions to..'
    It is a very slow procedure.
    Thank you

    GPS data format in Bridge is based on Adobe Extensible Metadata Platform(XMP) standard.  The only supported format is GPS format dd,mm.mmmmW.
    Thanks,
    Bridge QE

Maybe you are looking for