Bridge cs5 camera raw 6.5 to 6.5 and new bridge cs6 preview problem

Hi,
when i actualize camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and it last few seconds with the yellow exclamation mark.
Months ago the only solution i found after several instals was to turn back to camera raw 6.5.
Now im trying beta bridge cs6 and problem come back for me again.
I use Nikon D3x with 14 bits ~49MB .nef files in Windows 7 64 bits.
Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
Thanks
Arménio Teixeira

Frau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

Similar Messages

  • Canon 6D, Bridge CS5, Camera raw 6.7.1 -- cr2 files not shown

    I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?

    Frau S aus B wrote:
    I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
    The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
    Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
    If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

  • How download cs5 Camera raw update and how make Photoshop the default in the Bridge "open" menu?

    Two problems  which have defeated me.
    First, I have a new Canon  EOS 500D  and need to download the  recent  (July  2010) CS5 Camera Raw update. However both of my computers freeze when I move from the Adobe Support web page to the Download web page.  Is this a known problem? What to do about it? I am using CS 5 on a Windows 2007 XP computer.
    Second, (probably related to the first)   opening a file in Photoshop is not listed among  Bridge's  "OPEN AS" options. Also,  the "OPEN"  Default is "PAINT". How do I set Photoshop as the "OPEN"  menu  default?
    Thanks for your suggestions. I am truly befuddled by these  issues.
    JackIsaac

    Sounds like something is really wrong with your computer, and it isn't clear what, but if you're just having issues getting to the download link for ACR:
    Here is the download page for ACR 6.1 update:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4728
    Here is the download page for the CS5 12.0.1 update:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4733
    If those links don't work, you can probably find the same updates on the FTP site, although some things here are more than a decade old:
    ftp://ftp.adobe.com/pub/adobe/photoshop/
    See if Bridge and ACR are any happier after installing these two updates.  Make sure you run them as Administrator.
    If those still don't work for you, try another browser, where Internet Explorer, Firefox, and Google Chrome should all work.
    http://www.microsoft.com/ie
    http://www.firefox.com/
    http://www.google.com/chrome
    There are numerous other browsers, as well, but they probably won't work if the above three don't.
    Perhaps you either have a virus that you should scan for, or over-zealous internet-protection software that you could try disabling temporarily.
    My favorite free virus/malware scanner is from www.MalwareBytes.com
    The payfor version will automatically update itself and scan, but the free version works just as well except you have to manually update and scan.

  • Bridge or camera RAW - not enough memory to run Nikon D800 large 50 MB files  Any suggestions?

    Does any one have the same problem trying to work with Nikon D800 large files (50MB !) and Camera RAW ??
    Even with one image opend when I click Done I get a message Bridge is low on memory - Restart.   Also the tumbnails preview  and full scree becomes blank!
    I have CS5 / Camera RAW 5.7  Computer Windows XP  4 G Memory
      Is it a Bridge issue or Camera RAW issue?    Any proven solution?
    Thanks
    Dov

    I have CS5 / Camera RAW 5.7  Computer Windows XP  4 G Memory
    Could you provide more details about your configuration?
    This info can't be right, CS5 comes with ACR 6.7 and Windows XP needs at least servicepack 3 to my knowledge.
    4 GB RAM might be sufficient but is not much, do you have also the 64 bit installation?
    And did you reset the preferences for Bridge also.
    Maybe Curt hops in, I am a Mac user and don't know very much about Windows I'm afraid

  • Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks to anyone who can help!!

    Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks!!

    That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
    Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
    If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

  • Corrupted RAW in Bridge CC, Camera RAW and Photoshop CC

    Hello,
    I am using up to date versions of Bridge CC, Camera RAW nad Photoshop CC and I have the following problem.
    - after transfer photos from Canon EOS 6D to computer thumbnails in Bridge seems to be fine
    - when I open file in Camera RAW file seem as below example
    - when I open file in Photoshop CC file seem as below example
    - when I open RAW in IrfanView image seems to be fine
    - I can open image in IrfanView, save as TIFF and in Bridge and Photoshop seems to be fine
    - the problem occurs randomly, about 5% of images from 500 images
    Do you have similar problem? Does anybody have any idea?

    The previews are ok in Bridge because it's just a preview jpg, not the actual RAW file.   I'm not sure why it would open OK in Irfanview.  I had a similar problem after a HDD crash and tried Irfanview with no more luck than any of the Adobe programs.
    Have you tried Adobe's DNG converter to see if you get the same result?  Is this a consistent problem, or just this one time?

  • Beim cs2 bridge geht camera raw nicht

    beim cs2 bridge geht camera raw nicht

    In Ergänzung zu Willis möchte ich anmerken, dass Camera RAW zu Anfang wirklich nur für RAW-Daten vorgesehen war (daher auch der Name) und deshalb keine Beabeitung von JPGs und anderen Dateien möglich war. Erst mit späteren Versionen wurde die Bearbeitung anderer Bildformate nachgelegt.
    Gruß
    Bernhard

  • Bridge CC でCamera Rawが使用できません

    Bridge CC で「ファイル」→「Camera Rawで開く」がグレーアウトしていて使用できません。ショートカットの「command + R」でも反応せず。原因と解決方法をお願いします。気になる動作として、起動時に毎回起動時に「キャッシュのクリアにしっぱ。。。」とポップアップが出ます。キャッシュをクリア、アンインス トール後再度インストールしても解決せず。

    Photoshopからは開けません。Photoshopのバージョンは「CC」  2014.1.0 20140730.r.148、OSは10.9.4です。ちなみにCamera Rawで開こうとしてる画像はJPGです。なのでPhotoshopから通常開けないかと思われます。BrudgeからはJPGでも開けるので、Brudgeで開いています。ちなみにBrudgeのバージョンは「CC」6.1.0.115です。

  • Changes I make in camera raw do not show up or update in bridge.

    Greetings.
    I’m working in PS CS4 in XP(government).
    Changes I make in camera raw do not show up or update in bridge.
    These images DO process with the changes when I run my actions.
    For example: Open images in bridge. Edit. Open reaming images in camera raw. Push the images two stops in camera raw. Close camera raw. Images in bridge show no change. Run action to turn raw files into psd. Final PSD appear pushed two stops.
    Purging Cache make no difference.
    Thoughts?

    You are using Embedded thumbnails.  These are small and fast, but do not show raw edits.
    You need to use one of the HQ thumb options to see the edits.

  • RAW Images Alter When Saved After Processing in CS5 Camera RAW?

    Hi,
    I am currently experiencing a problem in Photoshop CS5, where after processing a CR2 RAW image file in Camera RAW, whether I then decide to open the image straight into CS5, or save as a jpeg or tiff file, the image completely alters from what I was previously seeing in the Camera RAW window?
    The saved jpeg/tiff, or image now shown in CS5 is now very tinted, where objects that were perfectly white in the Camera RAW window are now a dirty yellow colour.
    I was just wondering if there was any advice any of you could give me as to what the problem might be?
    I have made sure that both CS5 and the Camera RAW window are both set to sRGB, but it has had no effect on the problem.
    Thank you in advance for any help
    Russ

    Color Management in Photoshop.
    Sent from phone.
    În data de 02.09.2012 23:08, "Tube Screamer" <[email protected]> a scris:
       Re: RAW Images Alter When Saved After Processing in CS5 Camera RAW? created by Tube
    Screamer <http://forums.adobe.com/people/Tube+Screamer> in *Adobe Camera
    Raw* - View the full discussion<http://forums.adobe.com/message/4667772#4667772

  • Fuji Finepix X10 in CS5 Camera RAW

    Hello
    I have a problem to open RAW files from Fuji Finepix X10 in Photoshop CS5 Camera RAW.
    Does anyone know how to solve this problem.
    Wojtek

    The Camera Raw forum is at:
    http://forums.adobe.com/community/cameraraw

  • Is there a CS5 camera raw update for the Nikon D600?

    is there a CS5 camera raw update for the Nikon D600

    Not as yet. ACR 7.2 does have preliminary support for D600. Output may change in final release of D600 support in upcoming ACR 7.3.
    http://blogs.adobe.com/lightroomjournal/2012/10/camera-raw-7-2now-available.html
    ACR 7.3 will have complete support for D600.
    But, if you're on CS5, I'm sorry to break it you cannot upgrade to ACR 7.x...
    You may want to consider upgrading to CS6 or Lightroom 4 (cheaper alternative) to get ACR 7.x support.
    Or, use the DNG converter, make TIFFs and open them with PS.

  • CS5 Camera RAW Mac

    Why won't CS5 camera raw update to 6.7 on my Mac? In fact, I don't think any Adobe CS5 apps will up date. I'm running Yosemite.
    Does anybody know how to fix this?

    Here are my 2 problems.
    1) I can't update to Camera 6.7. 6.7 will open my D4 NEF RAW files.
    2) No CS5 apps seem to update.
    See attached
    The first screenshot is from my MacBook Pro. The second is from my Mac Pro. I changed HDs in my Mac Pro and now CS5 won't update!

  • Bridge Fehlermeldung " Camera RAW Entwicklung ist nicht Aktiviert "

    Seit einiger Zeit kann ich keine RAW Datein mehr in Bridge direkt öffnen und mit Camera Raw bearbeiten. Es wird immer rüber zu Photoshop geschickt. Früher konnte ich einfach auf eine RAW klicken, auf "in Camera RAW öffnen" und es wurde innerhalb von Bridge in Camera Raw geöffnet.
    Jetzt bekomme ich die Fehlermeldung "Camera RAW Entwicklung ist nicht Aktiviert" und kann Camera Raw nur noch mit Photoshop benutzen.
    Woran kann das liegen? Das Problem trat plötzlich auf. Ich kann mich nicht errinern etwas geändert zu haben.
    Camera Raw Version 8,6 (letztens geupdatet in Hoffnung dass das Problem verschwindet.. leider ohne Erfolg) Bridge Version CC 6.0.0.151

    Hallo Monika,
    entschuldigung, wenn mein Deutsch schwach ist. Hast du die Updates
    runtergeladen? Es gibt eine neuere Version im Vergleich zu der
    Originelversion.
    Gruss aus Kanada
    Jim

  • PS to How to  convert psd to cs5 Camera Raw

    I have scanned slides saved as cs3 psd and want to open in CS5 Camera Raw and Smart Object.

    You would need to convert your PSDs to TIFFs first.

Maybe you are looking for