Bridge CS6 and Action Essentials 2 Video Problem

Hello,
I am viewing the previews of Action Essentials 2 from Video Copilot and the resolution seems very degraded, tons of artifacts also.  This never happened before, and these are just pre-keyed clips for special effects, .mov files.
I have included a jpg of viewing the same clip in preview window of Bridge CS6 5.0.1.23, and in Quicktime 7.73.  You can see in the image there is a huge difference. It renders fine in After Effects CS6, Premiere, and Photoshop.
I have purged the cache, restarted, checked for updates, etc.
I have updated nvidia drivers 306.97 and a 480 gtx EVGA vid card.  Windows 7 64bit SP1, and i7-920. 
This seems to have happened recently, as it used to preview in high quality.  I checked video I did on my Nikon D800 and it appears to be fine, and uses a .MOV extension.
Please any advice would be helpful.

I am pretty sure the CODECS are installed on my pc, since I can view the clip in quicktime.  But I'll give it a shot. 
Update:  I used G-spot and the codec on these videos appears to be png.  The fact it says codec status undetermined is strange, but I also checked files from my camera and files I rendered out using media encoder and these all say the same thing, but work with no problems.
<--this is the .H264 file i exported using media encoder.  Next is video clip G-spot info is straight from my Nikon D800.

Similar Messages

  • Im using bridge cs6 and i cant output to pdf or web on a new iMac 10.8.5 Help please

    im using bridge cs6 and i cant output to pdf or web on a new iMac 10.8.5 Help please.
    I have reset preferences etc

    Hi Curt
    No the far right field was left totally empty, reset preferences etc and nothing.
    finally un-installed photoshop and re installed it and now all is going fine
    Regards Terry

  • Using premiere cs6 and cant see video in source or program monitor only can hear audio

    using premiere cs6 and cant see video in source or program monitor only can hear audio

    More information needed for someone to help... please click below and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • I'm trying to run an update for bridge CS6 and the dialog keeps telling me to close bridge first even though Bridge isn't open

    I'm trying to run an update for bridge CS6 and the dialog keeps telling me to close bridge first even though Bridge isn't open

    Bridge is probably running in the background.
    Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

  • Problem with Bridge CS6 and MCXRedirector (OS X 10.9.5)

    Good afternoon all, I have a very irritating issue with Bridge CS6 that I've pretty much given up on now, so I'm wondering if anyone out there can help me before I do.
    The issue lies with Bridge CS6 running in a networked Mac environment, first, a little background: I am using OS X Server's Workgroup Manager facility for various restrictions and folder redirection. Our users had a nasty bug a little while ago that caused saved Photoshop files to end up in ~/Library/Caches/TemporaryItems instead of the actual network home location they selected to save in. While this was happening, a single entry was being used in the MCXRedirectory preference to redirect the entire of ~/Library/Caches/
    This was resolved by changing that preference and branching it out a little more, so now the folders subject to redirection are as follows:
    ~/Library/Caches/Adobe
    ~/Library/Caches/Adobe Camera Raw
    ~/Library/Caches/Meta
    ~/Library/Application Support/Adobe
    Doing this fixed the saving issue with Photoshop, but has in turn broken Bridge. When launched, Bridge immediately fails with the error "Adobe Bridge CS6 quit unexpectedly" and gives the three options to ignore, report or reopen.
    Taking away the ~/Library/Caches/Adobe redirection allows Bridge to work as normal again, but then I'm back to square one with Photoshop files saving in TemporaryItems again.
    Does anyone have any advice to remedy this annoying problem please?
    Thanks in advance.
    EDIT: Bridge version is 5.0.2.4

    Sorry, did not solve the problem. The info given did not bear much relation to what I could see in the print drop down box. I have been through all settings I can access and every thing appears normal. The print preview in the print box appears normal and shows colour, but this does not translate to the actual print.
    When printing a docuement of 3 pages or more using double sided the result is the first docuement page on one side of a sheet and the last page on the other side, but upside down, despite orientation set to long edge binding. All other pages between first and last are ignored.
    When printing docuements originating from printer software such as Print Quality Diagnostic and Make The Most Of Your Printer, the printer performs correctly with good quality printing and colour.
    I assume that the Mac update to 10.9.5 has corrupted something but I am not knowkedgeable enough to understand what. Any further assistance would be greatly appreciated. 

  • Problem with Bridge CS6 and zooming to 100%

    When I click on a file to zoom to 100% it zooms to 800%. I had the same problem in CS5 and fixed it by deleting the com.adobe.bridge.plist, but this does not work with CS6 and I don't even find the plist. I have a Mac with OS X 10.8.2. I found two plists, com.adobe.CSXS.3 and com.adobe.CSXS2Preferences but it didn't fix the problem deleting them.
    I use the zoom function alot and would be very grateful if someone could help me. I do not like the preview workspace with the little 100% window, I prefer zooming to 100% by clicking on the file.

    It does not work on a Mac, and they have only one set og +/-, at least my Macbook Pro has.
    That is a bit strange, it always has worked for that way on both my Mac Pro and my MacBook.
    I can use the scroll wheel on my mouse to enlarge the 100 % preview from loupe in preview window to 200, 400 and 800% but also the + and - keys from both my qwerty key board and the number pad of my extended keyboard for the same result.
    Hitting tab for full screen preview I don't even have to click, both aforementioned + and - keys set to 100%, 200, 400 and 800% as well my scroll wheel.
    All those methods work on both MacPro and MacBook.

  • Bridge CS6 does not recognize videos but CS4 does

    Hi forum,
    My copy of Bridge CS6 suddenly stopped showing a preview image for video files and does not play them either.  Lightroom 4.4 and Lightroom 5 also do not recognize video files (.mov's, .avi's, m-pegs...).  My Lightroom used to have no problem playing them.
    Bridge CS4 sees them and plays them as normal.
    I purged my video cache in Lightroom, uninstalled and reinstalled it, updated Quicktime and am running OSX 10.8.5. 

    Here is a link for LR reset http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file

  • Adobe Bridge (CS6) - bulk action - JPEG Options must be OKed for every image

    Hi all-
    I created an action script for a watermark in Photoshop CS6. Then, I ran my script as a bulk action in Adobe Bridge (CS6) against my JPEGs. However, the JPEG Options dialog/window appears for every image in PS. Is there a way to have this automatically OK (and at the highest quality) so that I don't have to sit and click OK over and over?
    I am on a Mac btw.
    Thanks!

    Please help

  • Bridge CS6 and USB 3.0

    Hello,
    Bridge CS6 always stops importing the files from my D800 via USB 3.0 after exactly 6 jpg files are transfered. In mixed nef+jpg as well as in jpg only mode.
    No matter if CF only or SD only or both cards are used.
    No problem with .nef only.
    To change the target directory to another SSD or HD makes no difference.
    But at the same USB 3.0 ports (I tried them all), no problem whatsoever to do the transfer via Windows Explorer. So I guess it must be something with Bridge and USB3.0 and jpgs from the D800.
    System is a brand new W7Ultimate64 on an IvyBridge Z77 platform.
    Thanks for any helfpul suggestion,
    /Rikkou,
    there is no problem, except the slooooow speed, with Bridge CS6, if the D800 is connected via any USB 2.0 port.

    Feel free to post on the Bridge Forum.
    http://forums.adobe.com/community/bridge

  • HT3964 For the past several months my MacBook Pro has been shutting down. I get horrible video with marks and striations acress the laptop screen and an additional monitor and the weird video problems until the multilingual notice comes up saying to shut

    I used two monitors, and several months ago the MacBook Pro started crashing frequently. It seems like it might be overheating. Sometimes the disks seems to race. I leave the computer on most of the time and it sleeps when I am away, but when I come back in the morning it will have colored striations across both screens, and soon the multilingual announcement comes up that I have to press and hold down the power key.
    Also, when using a progam like Skype video, the video goes insane frequently, with Skype windows freezing, video freezing, Skype window cutting in half, and eventually the computer crashing.
    It seems to be a video problem.
    What do I do?

    I would take some screen shots of the anomalies and take the MBP to an Apple store genius bar.  I you cannot reproduce the display problems, the screen shots will at least give them a start point for an analysis.
    Ciao.

  • Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
    tracking down the cause of the flakiness can be tricky ... as you already know ...
    just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

  • Can i send email directly from bridge cs6 and cc ?

    hi
    can i send emails directly from bridge cs6 or cc directly from bridge?
    i found this scripts http://kb2.adobe.com/community/publishing/894/cpsid_89450.html
    but i run cs6 and cc under windows 7 sp1 64bit and windows 8.1 64bit
    and i have thunderbird email client
    is there a way to make it work?
    maybe i can install another email client
    thanks

    // consult MAILSEND in here: https://github.com/muquit/mailsend and download the app 'mailsend.exe' for windows7 in here:
    // https://github.com/muquit/mailsend/releases/download/1.17b15/mailsend1.17b15.exe.zip
    // unzip it and put the app .exe where you want to use it.
    // I have tested using Bridge to send e-mail using my gmail e-mail account and it works. I only needed to 
    // I needed to send e-mails from Bridge using my google account, but first I needed to put on my network the app 'mailsend.exe'(i'm using PCs windows7 , CS6 and a network)
    // All my 20 people team is using it, so I decided to put the app 'mailsend.exe' on a common place on network. I you are using it only on 1 PC you don't need you can put it on its disk.
    // Solution: All you need is to create a bat file that tells 'mailsend.exe' what to do:
    var mailsendBat=File(Folder.temp +"/mailsendBat.bat"); // creates a bat file on the temporary folder
    mailsendBat.open("w")
    // the place where app 'mailsend.exe' file is
    mailsendBat.writeln('"X:\\[someFolder]\\mailsend.exe" \^');
    // my gmail
    mailsendBat.writeln('-t [email protected] -f [email protected] \^');
    // the title can have encoding or not (-enc-type "base64")
    mailsendBat.writeln('-cs "utf-8" -mime-type "text/plain" -enc-type "base64" -sub "Ich lerne seit ungefähr zwei Jahren Deutsch" \^');
    // this works for the smtp gmail
    mailsendBat.writeln('-starttls -port 587 -auth -smtp smtp.gmail.com -user "[email protected]" -pass "[myPassword]" \^');
    // If I want to send an image attachment I use this 1, 2, or more times. If content-type is "multipart/mixed" the inline images don't work. Instead the images will be sent as attachment.
    mailsendBat.writeln('-content-type "multipart/mixed" -attach "C:\\Users\\Public\\imagens\\myImage.jpg" \^');
    // this is the line to send a simple text line with no encoding specified
    mailsendBat.writeln('-enc-type "none" -mime-type "text/plain" -M "one line attachment 1" \^');
    // you can sen inline html that can also have links to inline images
    mailsendBat.writeln('-mime-type "text/html" -enc-type "none" -M "<b>this is a test</b><br><img src="http://[any_online_image.jpg],image/jpeg,i">" \^');
    // sending text line with special encoding
    mailsendBat.writeln('-cs "utf-8" -mime-type "text/plain" -enc-type "base64" -M "Ich lerne seit ungefähr zwei Jahren Deutsch" \^');
    // endind it
    mailsendBat.close();
    // executing
    mailsendBat.execute();
    // there are also other kind of commands (consult https://github.com/muquit/mailsend)

  • Bridge CS6 and CC

    I am using CC on a Mac.
    Following tips from these forums, I Installed Premier Pro CS6, and then removed it so that I can keep and use Encore CS6.
    I find that I now have Bridge CC and Bridge CS6.
    If I remove the CS6 Bridge, will Encore still work?
    Thanks
    Kevin Thompson

    Never tried it, but I know of no Bridge function in Encore. Please let us know.

  • Point-and-shoot camera video problems

    Hi I'm trying to edit a video from a DSC that is encoded as 30.000 frames per second non-drop, 1280x720p, square pixels in motion JPEG codec.  The audio is 8KHz 64 kb/s mono in PCM codec.
    In elements 8, I can't import it because of the audio format.  So I ran it through Free AVI Video Converter. It changed the video codec  to XVID and the audio to MPEG. to Now they import and an edit just fine.  But when I try to export them, I can't get a setting that looks good. The pixelization is horrible. Titles are completely unreadable.
    I'm tempted to upgrade to elements 11, but I won't try that unless I know for sure it will solve my problems.
    I'd really prefer to import the direct camera videos and export them at a usable quality.
    The camera was a friend's SeaLife DC1400

    Thanks to both of you for the quick replies.
    Hunt, this was a good suggestion. I switched to H.264 at a fixed 3MB/s and it worked much better.
    The error when I import the unmodified clips is: Add Media Failure. <filename> Unsupported audio rate in file.
    I used GSpot to check the original files and it shows the audio codec is PCM Audio, at 8KHz, 64 kb/s (1 chnl).
    My re-rendered clips are MEG-4 AAC LC, 48KHz, 160 kb/s, stereo (2/0)
    So apparently the audio was too poor to import.  Ironically these are scuba diving clips, and I plan to throw-away the audio entirely.  Unfortunately I have to re-encode the video stream to achieve that goal. I was hoping to find a tool that can strip the audio out of the MP4 wrapper. But everything I found so far was to extract the audio and ditch the video.

  • Bridge CS6 and Camera Raw

    I am unable to open jpegs into camera raw through Bridge CS6. Camera Raw preferences are unavailable. I am using OS 10.9.2.

    Did you recently update to camera raw 8.4?
    If so, you need to replace the existing camera raw 8.4 plugin with the one from this link:
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

Maybe you are looking for