Bridge CS6 Cache and Freezing Issues

I downloaded Bridge CS6 and I have not been able to use it yet. I am on a MacBook Pro running 10.7.4 and every time I launch Bridge I get the following error:
Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation.
When I try to purge the cache Bridge freezes up. If I don't try and purge the cache I am unable to navigate to any folders on my computer and it just hangs. I eventually have to force quit to get out of it. So far Bridge CS6 has been completely unusable.
Please help.
Thanks.

When I go to ~Library/Caches/ there is a folder for com.adobe.bridge5 but there isn't one for com.adobe.bridge6
Your in the wrong folder. Follow the path you have discovered yourself using the pref settings Curt suggested
~library/caches/Adobe/Bridge CS6 and inhere should be 2 files:
Adobe Bridge Plug-in Cache
and the folder called Cache. Inhere should be 4 folders called '254', '1024', 'data' and 'full'
All those folders carry the content of the respective quality of the thumbs and preview as well as 100 % cache and Bridge database.
Any way, Since you have not used Bridge you have no relevant amount of cache and I would suggest you quit both PS and Bridge and manual delete both the items (plug in and folder called cache at the end of the Bridge CS6 path mentioned above.
(both files will refresh itself after a restart of Bridge).
To be on the save side also visit in same user library the folder Preferences and look for the file called "com.adobe.bridge5.plist" (yes it is Bridge 5 that comes with CS6, all Adobe apps have their own version number and they are presented in the same Suite version. CS6 has PS version 13 and Bridge version 5 )
also drag this file to the trash.
Then hold down option key (alt) while starting Bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.
Choose reset prefs and try again.

Similar Messages

After Effects CS6: Cache and Reload Footage Problem

After Effects CS6: Cache and Reload Footage Problem
I am having trouble getting my footage to update in an AE project.
In an existing project, there is an image sequence in a composition. I have saved and closed AE, modified the footage (same dimensions and qty. of frames, only the pixel data changes), and then re-launched AE and opened the project. Though I have changed the footage, the old content still appears.
To resolve this, I have done the following:
Edit>Purge>All Memory
Edit>Purge>Image Cache Memory
Edit>Preferences>Media & Disk Cache>Empty Disk Cache
Edit>Preferences>Media & Disk Cache>Clean Database & Cache
From the Project window I've selected all footage and selected Reload
None of these got the footage to update. I could double-click on the footage in the project bin and scrub the play head and the old footage was still displayed.
Finally I had to replace the footage with itself and that resolved the issue.
If this is operator error, lack of understanding the cache functions, or something else, I'd appreciate some assistance. I don't recall this behavior in CS 5.5, so I am guessing this is a change in CS 6.
Win 7 Pro 64bit Service Pack 1
Intel Xeon CPU X5450 @ 3.00 GHz 2.99 GHz
RAM 20 GB

about Illustrator and Photoshop files in CS6 especially - you should work with Ctrl/Cmd+E (Edit Original).
when in Ae and you want to change a source file, use this command on one of the layers
from the source file you wish to change (doesn't matter if its in the timeline or project window) and
your original software linked to that file will open.
when you work this way you make AE reload that file and any change after that will be seen back in AE immediately.
it is also very convenient way to work because there can be no confusion on which file you are on
if you work with multiple source files for example.
even if you made the change with your Photoshop/Illustrator opened file and got back to Ae
and didn't see any change - press on one of the layers Ctrl/Cmd+E and this will refresh it immediately.
This is the case in CS6.
in CC I have noticed that any change I make is refreshed immediately in Ae as if it rechecks the changes all the time,
and didn't even need to use Ctrl/Cmd+E but it's a good habit all the same.
didn't come across a case where that didn't work for be but
if all fails you could always change the folder location of the file, let Ae lose it, then replace footage of the file,
and thus let Ae re-link it back.

Cache and performance issue in browsing SSAS cube using Excel for first time

Hello Group Members,
I am facing a cache and performance issue for the first time, when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users
system (8 GB RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cubes - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after
daily cube refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (16 GB RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
Best Regards, Arka Mitra.

Thanks Richard and Charlie,
We have implemented the solution/suggestions in our DEV environment and we have seen a definite improvement. We are waiting this to be deployed in UAT environment to note down the actual performance and time improvement while browsing the cube for the
first time after daily cube refresh.
Guys,
This is what we have done:
We have 4 cube databases and each cube db has 1-8 cubes.
1. We are doing daily cube refresh using SQL jobs as follows:
<Batch xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<Object>
<DatabaseID>FINANCE CUBES</DatabaseID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>
2. Next we are creating a separate SQL job (Cache Warming - Profitability Analysis) for cube cache warming for each single cube in each cube db like:
CREATE CACHE FOR [Profit Analysis] AS
{[Measures].members}
*[TIME].[FINANCIAL QUARTER].[FINANCIAL QUARTER]
3. Finally after each cube refresh step, we are creating a new step of type T-SQL where we are calling these individual steps:
EXEC dbo.sp_start_job N'Cache Warming - Profit Analysis';
GO
I will update the post after I receive the actual im[provement from UAT/ Production environment.
Best Regards, Arka Mitra.

Bridge CS6 cache problem causes freeze

MacPro early 2008, 10 mb RAM, Apple OSX 10.7.3, CS5 already installed.
CS6 Beta was working fine until today.
Now when I open Bridge CS6 I get "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation." I then try to purge the cache, but nothing happens and Bridge freezes.
Worse, I cannot use my keyboard at all or perform any mouse click actions if Bridge is the active window. I cannot close Bridge. What I can do is alt/tab to another window, and then Force Close Bridge.
I have tried restarting the MacPro but this does not solve the problem.
The problem started earlier today after I re-edited a nef which I had previously edited in ACR 6. I cancelled all the previous edits first.
Also, yesterday I installed Little Snitch, which I have now uninstalled.
There are no CrashReporter logs for the freezing problem.

How is your disk free space? When I loaded Bridge CS6 the default option was for 100% preview. That takes a lot of time and space to build. Can occupy gigs of space.
I reset thumbnails to embedded. Much smaller and faster and for me works just fine.

Bridge CS6 Photo downloader freezes on .mov files

Bridge CS 6 photo downloader freezes on .mov files from a T4i. To get the video files I've had to use Bridge CS5 photo downloader.
I have PS CS5, PrPro & AE CS6 if this makes a difference. Photos are no problem downloading.
Any ideas? Thanks.

I shoot both. I use Bridge & ACR CS6 to view and edit Raw files. CS5 doesn't recognise the Raw files (had to convert to dng before I got Bridge CS6). CS6 will download both Raw & Jpeg files. It hangs up on the .mov files.
I use a card reader on my Epson printer. I've cleared the cache in Bridge. How do I resfresh the prefs in Bridge?
My OS:
Intel i7 3770, Windows 7 Pro w/SP1, 64 bit, Intel 520 Series SSD, 32G RAM, 2 – 2T RAID, (1T external), GTX 550 Ti graphics
Thanks for your help.

Bridge CS6 Trial and Bridge CS5

Hello
I have just installed Photoshop CS6 trial with Bridge CS6 and notice that as in Bridge CS5, in Bridge CS6, the previews of thumbnails do NOT show sharpening and NR applied in ACR7, even after purging the cache and setting monitor size preview. Is there any reason why? It means that if I run a slideshow, some of the editing in ACR does not appear in the views.
Surely the monitor size preview jpegs should reflect all work changes made in ACR.
Mike Engles

http://forums.adobe.com/community/bridge/general

Bridge CS6 download function freezes.

What is causing the Bridge download function in my CS 6 to freeze up? Bridge in my CS 5 continues to work properly. How to resolve?

No experience with network nor Windows but Bridge CS6 changed to 64 bit and also changed its database from MySQL to SQLite (and I don't know anything about this technical stuff myself I'm afraid).
Did you already used the advanced Find option in the edit menu (cmd + F) and inhere selected the parent folder on your source and included both options to include all subfolders and non-indexed files?
This first time may take long but after finished indexing it should work faster.

Bridge CS6 Cache problem

Have installed Photoshop CS6 and in using Bridge I get the message "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation". If purge the central cache as instructed, on the start up of Bridge I get the same message and are unable to use Bridge.
I am on a Mac using OSX 10.7.4
Your help will be appreciated

"Removing the Cache manual is fast, you only need time to rebuild cache,
but that is something you can do with one click on the button an let it
run overnight." How do I do that?
The path provided is for a Mac, there should be a similar path for Windows, maybe Curt can provide you this. The principals stay the same, you quit bridge, dump the cache file manual, restart Bridge (builds a new, empty but fresh cache folder) and when you point Bridge to a folder it start building the cache according your settings (ACR, HQ preview etc.)
If you have a lot of subfolders just select the main folder, use the menu view / show items from subfolders and this means your main folder shows all the content of your subfolders in the content panel.
This takes a while and according to your amount of files and file size as well as processor speed it can take several hours before it is finished. For best practice start this procedure as 'last of the day', leave your PC on for the night and let Bridge do its job. It takes a lot of resources and time for Bridge to cache so if it is the only task your PC has to do the better it will do it

Bridge CS6 cache location

My Master Collection CS6 was installed as administrator under Win 7 x64 Pro .
In CS5 I placed the cache on a non-boot drive.
In CS6, the only cache location options available to me from within Preferences are within my User folder on the boot drive. I am running as admininstrator, and have tried explicitly running as administrator to no effect.
How can I get the CS6 cache onto the drive of my choice?

Note the current folder and the full path to the folder you want to use for the cache.
Run regedit.
Search for Bridge CS6.
Look down the associated keys and locate the folder noted above. Only one place needs changing.
Edit the folder name to read the new location.
Re-start Bridge and check the preferences show the new folder.
Delete the old cache folder (mine was 40+ gigabytes).
Leave Bridge running until it has finished regenerating the cache in the new location.
It might have been quicker to copy/move the old cache to the new location before re-starting Bridge after the location change, but I wasn't sure it would work correctly and was pleased to have a fresh, clean cache.

Bridge CS6 Cache

When I change folders in Bridge CS6, I'm told there's a cache problem and I should purge the cache. I've purged this several times with no effect, restarting Beidge each time. Have also rebooted and done a safe boot. I'd like to reinstall but have no disk, as I originally downloaded the photoshop package when I bought it.
Help with the caching problem appreciated, also a pointer to a download site, which I can't find at adobe.com
Running a Mac Pro with OS 10.8.5, latest Bridge CS6 update.
Thanks,
--Gene

The computer is a Mac Pro, 100 GB RAM,
I don't believe that is a correct number, supposing you have a early 2009 model the max is 32 GB or you should have a special build 8-core actual but that can handle max 96 GB. In those days in dollars the equivalent of a very nice car…
Check again and also check your graphic card, the 2009 came with 512 MB ATI Radeon HD 4870 or NVIDIA GeForce.
512 MB VRAM is the minimum required
1.6 TB of disk in 4 drives.
Depending on your needs but to me this seems a very low number, I have a total of 7.5 TB on disk space in my MacPro 2012. Digital images are very space consuming especially if you use layers in PS.
HDDs are very cheap nowadays as is RAM compared to 10 years back.
The boot drive is 640 GB with 85 GB available.
This really is a very low number, roughly about 13 % free space left. The system, PS and other applications need space to write temporarily data to and 13 % is not that much left, especially if you have a lot of fragmentation going on.
What else do you need?
RAM and VRAM
And the last 2 questions from post 5

Photoshop CS6 Tools and Cursor Issues with Mountain Lion

Am using Photoshop CS6 on iMac 27inch with Mountain Lion. Experiencing inability to use the move tool to place one image on another after extraction. I place the move tool on the previously extracted image and drag it into an new image, but the extracted image does not get placed on the new image. Also, cursor disappears frequently when using Photoshop for extended periods of time.
Anyone having similar problems?

The cursor disappearing is a well known MacOS bug affecting all applications.
Have you installed all the updates for CS6?
And are you dragging from the layers palette, or from document to document?

Bridge CS6 photo downloader freezes and will not allow import.

Hello,
I'm running Windows 8 and CS6. Whenever I try and import images from an photo card, Photo Downloader freezes. Only way to get out of dialogue box is to X out. I cannot import or set up default folders, file names, etc.. This never happened to me on earlier versions of Bridge. Any ideas? Happy to provide more specifics if helpful or relevant.

Do you have another reader? USB dedicated to specific size is most reliable.
If not you can try from camera, although this is the most error prone.
Also, it is recommended by many that you do not delete and format card in computer, but this should be done in camera each time.

[SOLVED] high CPU and freezing issues

Greetings,
While I don't claim to be an expert at these things, I'm no newbie either... at least as far as computers go. I admit there are still many things I need to learn about linux, but that's all part of the fun. Anyways on to the point of this topic.
After the power supply on my main pc died and shorted out the mother board with it, I have been forced to use an older computer. It is a computer that I know works as it was used by my wife as a desktop when she didn't feel like using her laptop. Odd.. I know, but hey, whatever she wants she gets .
It is an older pc, a compaq presario 5423. It is running an intel p4 1.6 gz processor and has an nvidia geforce 2 mx agp video card. Ever since the last xorg update that refuses to work with nvidia-96xx, I've been using the nv driver. I have tried briefly the other one (nouvelo or however it's spelled) and while it worked it seemed to slow my computer down and produce some odd effects like screen freezes and whatnot. It was running two 256 MB ram sticks, I replaced them with the two 512's from my main (dead) pc. I have the two hd's from my main pc on it, properly set up (I basically resinstalled arch so that I was sure it was done right, and just because I love the arch linux installation process, it is awesome IMO). I've been running this PC since.. October I believe... whenever it was that I submitted that e17 screenshot... I think that was October.
Here is the issue I am having. The CPU loves to max out.. ie.. reach 100% almost instantly. Open up a browser *poof* 100%, making me wait a moment before I can do anything else. Open up a few tabs.. *poof* 100%... and frequent freezes. It doesn't seem to matter what I am running, doing, using... it always happens. This happens in pekwm, fluxbox, openbox, e17, wmaker, firebox, twindy, fvwm, even the almighty awesome. Yes, those are all wm's I've tried. Forget trying to run KDE (I did, it loads... but that's about it. I had to hard restart because of total freeze-up). I've tried all kinds of browsers, firefox, chrome, iron, midori, auroa, konq... Midori hates me, the others are too heavy... only Chrome and Iron (both basically the same) work, but still experience the freezes and the like. Uzbl laughed at me as even trying to start it caused a massive CPU spike. I know, hard to believe.. which leaves me thinking there is a serious problem.
MPD spikes the CPU by 20% easily each song change. Googles even more so. Forget the heavyweights like amarok and exile. Pidgin spikes it when loading initially but evens out. Terminal spikes it only when compiling, updating, or building from AUR... or installing a package with pacman.
Here's the thing, when my wife used it before, using LXDE with Open Box and only a total of 512 MB she never experienced this. This box came with Windows XP which ran fine.. somewhat slow but fine. So this all leaves me thinking, something is just wrong. I am wondering if maybe bad RAM? Maybe the thing is just trying to give up the ghost? Before going and pulling out RAM though I want to see what you guys think.
Here's what HTOP has to say...
CPU(while writing this post): 36.8% (in pekwm!)
Mem: 187/1009 MB (all bars are lite up...)
Swp: 1/2863MB (already tapping into swap?)
Tasks: 128 total, 1 running
Load average: 0.26 0.08 0.06
So yeah, I researched online.. this processor is supposed to be able to even run KDE fine. So something has to be off. Any ideas?
Last edited by mythus (2009-11-20 12:13:53)

Well right before I changed drivers back to nvidia-96xx, I did a pacman -Syu check.. there was a new xorg update waiting for me. So I updated and switched back to nvidia-96xx driver.
Still having the fun CPU issues so this must not be an nv driver thing itself.
free -m provides the following...
total used free shared buffers cached
Mem: 1009 606 403 0 60 387
-/+ buffers/cache: 158 851
Swap: 2863 0 2863
Therefore it would seem that memory issue is not the problem.
Watching the cpu spike just because I type is very unnerving. Heck just running htop did a spike. Poor old computer... Just for S&G I tried once again to load kde. Neopunk killed it with it's massive cpu usage + x trying to match it. What can I say.. X was jealousy, there was no way X was going to let neopunk use more CPU than it.
Ah.. so nerve racking. I've been working on this for almost two months now. I'll look and she what distros I got lieing around.. been awhile since I burned one and not really wanting too.. had no desire since arch is what I want. But I suppose I do need to compare to see if it is something else like X causing this.
I'll do that in a bit.. I'll wait a moment incase anyone else has another suggestion. Give me time to get off my butt and do some honey-do's for my wife.

Constant rainbow wheel and freezing issues

Hello everyone,
I have done a lot of reading online about this issue, and I've called Apple a while back, but the issue has returned.
Firstly, I'm on a MacBook Pro 13" from Mid 2010. It's got 4GB of memory, and 2.4Ghz Intel Core 2 Duo processor. I've still got over 200GB avaliable on the hard drive. I'm also running Mountain Lion 10.8.2.
Basically these are my main issues:
Constant rainbow wheel occurs, probably once every few minutes or less of normal working
Sometimes happens just randomly
Sometimes occurs when I click a new application, new window, spotlight.. basically any clicks
Lasts from a few seconds to much longer, but generally the computer doesn't fully lock up
iTunes music will pause for periods of time, totally just cuts out.. then resumes after a random amount of time
Videos will pause during playback for random amounts of time - both streaming video and downloaded content
Overall slow response time no matter what I'm doing
I have a memory monitor on, and this all occurs when there is still over at least 1.5GB of memory. I've tried resetting the PRam (?) multiple times, and it used to seem to make my computer run more smoothly, but it no longer seems to rectify the issues. I've also went into the Disk Utility and checked permissions and ran the disk repair and everything..
I'm not sure what else to try, so any help would be MUCH appreciated. I'm in university and this constant freezing is not condusive to my learning haha. My computer even froze up once while typing this post!
Thanks so much in advance.

For my CPU Stats:
Highest process is the Google Chrome, followed by Kernel task, and Window Server
User: 1.06%
System: 1.17%
Idle: 97.77%
(The numbers fluctuate constantly, but the idle % never goes below 91%.)
System memory:
Page ins: Can't seem to find it
Page outs: 0
Swap: 0
Console log:
7/8/14 2:49:25.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=320[ksadmin] final status 0x0, allow (remove VALID)ing page
7/8/14 2:49:25.037 AM WindowServer[85]: common_reenable_update: UI updates were finally reenabled by application "Google Chrome" after 3.37 seconds (server forcibly re-enabled them after 1.00 seconds)
7/8/14 2:49:27.872 AM com.apple.iCloudHelper[263]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
    "Accept-Language" = "en-us";
    "X-Mme-Client-Info" = "<MacBookPro9,2> <Mac OS X;10.9;13A603> <com.apple.AOSKit/176>";
    "X-Mme-Country" = US;
    "X-Mme-Nac-Version" = 11A457;
    "X-Mme-Timezone" = "GMT+2";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1001 "The request timed out." UserInfo=0x7ff25373a230 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The request timed out., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
7/8/14 2:49:28.024 AM Google Chrome[239]: Couldn't contact spell checker for U.S. English
7/8/14 2:49:34.601 AM sandboxd[192]: ([315]) storeagent(315) deny file-read-data /Users/X/Library/Preferences/com.apple.WebFoundation.plist
7/8/14 2:49:35.015 AM com.apple.SecurityServer[14]: Session 100017 created
7/8/14 2:49:36.385 AM Google Chrome[239]: Metadata.framework [Error]: error getting store properties: (268451843) (ipc/rcv) timed out
7/8/14 2:49:36.385 AM Google Chrome[239]: Metadata.framework [Error]: unable to get a dev_t for store 1795162112.
7/8/14 2:49:40.438 AM usernoted[236]: Connection does not have the proper entitlement (com.apple.developer.notificationcenter-identifiers) to connect on behalf of com.apple.appstore. All communication will be denied.
7/8/14 2:49:40.442 AM usernoted[236]: Connection does not have the proper entitlement (com.apple.private.notificationcenter-system) to connect to the system notification center. All communication will be denied. center com.apple.storeagent
7/8/14 2:49:44.263 AM iTunes[303]: Metadata.framework [Error]: error getting store properties: (268451843) (ipc/rcv) timed out
7/8/14 2:49:44.264 AM iTunes[303]: Metadata.framework [Error]: unable to get a dev_t for store 1795162112.
7/8/14 2:49:45.439 AM com.apple.internetaccounts[277]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
7/8/14 2:49:45.439 AM com.apple.internetaccounts[277]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
7/8/14 2:49:45.456 AM com.apple.time[226]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
7/8/14 2:49:59.782 AM com.apple.NotesMigratorService[332]: Joined Aqua audit session
7/8/14 2:50:04.265 AM iTunes[303]: Metadata.framework [Error]: error getting store properties: (268451843) (ipc/rcv) timed out
7/8/14 2:50:04.266 AM iTunes[303]: Metadata.framework [Error]: unable to get a dev_t for store 1795162112.
7/8/14 2:50:06.448 AM com.apple.internetaccounts[277]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
7/8/14 2:50:06.448 AM com.apple.internetaccounts[277]: *** Warning: Timed out waiting for one or more plugins.
7/8/14 2:50:06.449 AM com.apple.internetaccounts[277]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
7/8/14 2:50:06.538 AM Dropbox[301]: PyObjCPointer created: at 0x56cfc88 of type {OpaqueJSContext=}
7/8/14 2:50:10.967 AM System Events[327]: .sdef warning for part of complex type 'number | boolean | date | list | record | text | any | data' used in suite 'Property List Suite': 'data' is not a valid type name.
7/8/14 2:50:10.968 AM System Events[327]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
7/8/14 2:50:13.399 AM mds[37]: (Error) Server: Error sending store properties to client (268435459): (ipc/send) invalid destination port
7/8/14 2:50:13.399 AM mds[37]: (Error) Server: Error sending store properties to client (268435459): (ipc/send) invalid destination port
7/8/14 2:50:16.451 AM com.apple.internetaccounts[277]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
7/8/14 2:50:16.451 AM com.apple.internetaccounts[277]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
7/8/14 2:50:16.451 AM com.apple.internetaccounts[277]: [Warning] IA: Not connected to daemon!
7/8/14 2:50:17.890 AM PhotoStreamAgent[280]: ApplePushService: APSConnection being used without a delegate queue
7/8/14 2:50:19.000 AM kernel[0]: fsevents: watcher dbfseventsd (pid: 346) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
7/8/14 2:50:23.795 AM com.apple.time[226]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
7/8/14 2:50:24.787 AM mds[37]: (Error) Server: Error sending store properties to client (268435459): (ipc/send) invalid destination port
7/8/14 2:50:24.787 AM mds[37]: (Error) Server: Error sending store properties to client (268435459): (ipc/send) invalid destination port
7/8/14 2:50:25.078 AM fontd[231]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
7/8/14 2:50:25.793 AM com.apple.dock.extra[270]: iPhotoDockTilePlugin: Unable to get dock badge information: connection timeout: did not receive reply
7/8/14 2:50:26.369 AM iTunes[303]: CFNetwork SSLHandshake failed (-9806)
7/8/14 2:50:26.370 AM iTunes[303]: CFNetwork SSLHandshake failed (-9806)
7/8/14 2:50:27.913 AM com.apple.iCloudHelper[263]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
    "Accept-Language" = "en-us";
    "X-Mme-Client-Info" = "<MacBookPro9,2> <Mac OS X;10.9;13A603> <com.apple.AOSKit/176>";
    "X-Mme-Country" = US;
    "X-Mme-Nac-Version" = 11A457;
    "X-Mme-Timezone" = "GMT+2";
error=Error Domain=kCFErrorDomainCFNetwork Code=-1001 "The request timed out." UserInfo=0x7ff25373b6c0 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The request timed out., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
7/8/14 2:50:28.125 AM com.apple.iCloudHelper[263]: AOSKit ERROR: Setup request failed, appleID=1058105670, url=(null), requestHeaders=
(null),
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7ff2535105c0 {HttpStatusCode=0, DialogInfo={
    DialogType = Unknown;
}}, httpStatusCode=0, responseHeaders=
(null),
responseBody=
(null)
7/8/14 2:50:29.460 AM Dropbox[301]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
7/8/14 2:50:44.308 AM secd[276]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
7/8/14 2:50:44.308 AM secd[276]: securityd_xpc_dictionary_handler WiFiKeychainProx[281] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
7/8/14 2:50:45.087 AM gamed[306]: CKSoftwareMap: Registering with Daemon
7/8/14 2:57:27.553 AM WindowServer[85]: disable_update_timeout: UI updates were forcibly disabled by application "Google Chrome" for over 1.00 seconds. Server has re-enabled them.
7/8/14 2:57:36.209 AM WindowServer[85]: common_reenable_update: UI updates were finally reenabled by application "Google Chrome" after 9.66 seconds (server forcibly re-enabled them after 1.00 seconds)
7/8/14 3:03:02.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=389[ksadmin] final status 0x0, allow (remove VALID)ing page
7/8/14 3:03:45.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=397[ksadmin] final status 0x0, allow (remove VALID)ing page
7/8/14 3:08:13.868 AM findNames[421]: dispatch_semaphore_wait() time out: -[IMKUserDictionary reloadWithCompletionHandler:]
7/8/14 3:08:13.870 AM findNames[421]: findNames reload user dictionary error Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from this process.) UserInfo=0x7ff712c360a0 {NSDebugDescription=The connection was invalidated from this process.}
7/8/14 3:13:16.000 AM kernel[0]: MacAuthEvent en1   Auth result for: 5c:35:3b:98:36:71 MAC AUTH succeeded
7/8/14 3:13:16.000 AM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0

Adobe Flash Pro CS6 -- cursor and focus issues

This is OS specific as it works fine in the Snow Leopard.
I am having issues with nearly everything involved with switching between apps / focusing on text windows / getting the cursor to appear where I click / etc since upgrading to Mountian Lion/Mavericks while using Flash Professional CS6.
Example problems:
I click on the Flash icon in the menu bar (twice because the new Mac OS's have focus problems in the dock with mission control enabled) the OS will sometimes switch to the space containing Flash (sometimes not but let's focus on the Flash focus issues). I hover over the code window, I scroll with the mousewheel down the page to where I want to edit the code, I CLICK exactly where I want to paste it, hit cmd+C -- then it pastes the code NOT THERE but instead where the cursor was before (at the top of the page)... So essentially I have to double or triple click everything in Flash all the time. I just click like crazy anymore on everything all the time, but in Flash it's really unpredictable.
This happens on both of my work computers (both 10.8.5)
and my Mac Pro (10.9) but not my MacBook Pro that is still extremely fortunate enough to have 10.6 on it.

What you need is an inner Graphic symbol. What I mean by Graphic symbol is when you select all your letters and hit "F8", choose "Graphic" instead of "MovieClip." In the properties panel, you'll see that one of the sections is called "Looping." Select"play once" (the default is "Loop"). Inside that graphic should be the animation of the letters moving in from left to right.
On the outer timeline, put a keyframe at the same frame number where the Graphic's animation ends. Change the Looping to "Single Frame" and then type in the frame number of the last frame. You can then create a motion tween that animates the graphic symbol upward at its final frame.

Bridge CS6 Cache and Freezing Issues

Similar Messages

Maybe you are looking for