Bridge CS6 crash with double click not with "open with"
Bridge cs6 keeps crashing whenever I double click on a file (jpg/psd/raw files).
After reading on this forum I couldn't find anything that worked for me.
The strange thing is, when I select a file right click open with photoshop CS6 (default) the file opens without any problem in Photoshop.
I have my default file associations of all (image) files set to photoshop CS6.
Any Ideas what can be the problem?
(windows 7 Ultimate and I have double-click edits camera raw setting in bridge marked off, and bridge crashes too when it is marked on)
Thanks!
well it never worked, and I installed several times. I kept working with bridge CS5, but I have a new camera with raw files only supported in CS6, so now I'm confronted with this problem again.
Also tried ctrl + open to reset & purge everything....
here's my log.
Faulting application name: Bridge.exe, version: 5.0.2.4, time stamp: 0x50d99f7a
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0012f9f8
Faulting process id: 0x17a0
Faulting application start time: 0x01ce30d973f12912
Faulting application path: C:\Program Files\Adobe\Adobe Bridge CS6\Bridge.exe
Faulting module path: unknown
Report Id: b4367997-9ccc-11e2-80b9-20cf30c9d4c4
Similar Messages
-
Hey guys, I have a slight problem. Anytime when I am navigating in finder, some commands get replaced with numbers and a letter. Like if I double-click to select "open with" N152 appears. Please Help.
Macbook Pro, Mid 2009, 10.6.8Karwin wrote:
This is sooo much, I have no idea where to start........
download and install intego's virusbarrier
http://www.intego.com/virusbarrier/
run a scan and post the results -
Bridge CS6 crashes with double-click, not with "open with"
Bridge cs6 keeps crashing whenever I double click on a file (jpg/psd/raw files).
After reading on this forum I couldn't find anything that worked for me.
The strange thing is, when I select a file right click open with photoshop CS6 (default) the file opens without any problem in Photoshop.
I have my default file associations of all (image) files set to photoshop CS6.
Any Ideas what can be the problem?
(windows 7 Ultimate and I have double-click edits camera raw setting in bridge marked off, and bridge crashes too when it is marked on)
Thanks!Have made comments on this in Photoshop forum, but have not solved problem yet. http://forums.adobe.com/thread/1184356?tstart=0
-
Magic mouse is not discovered by bluethooth software, but it worked OK until 2 weeks ago (10.6.8 and iMac 24). Now the double clik does not open messages, I must go to the file menu to do it. A nuisance. Closing a file takes exactly 2 or 3 seconds! Any idea? Mouse and batteries are OK and checked by retailer. Please help.
Also using iMac 10.6.8
My magic mouse works ok but I am getting the same message from Mouse prefs that no mouse is “discovered” and the progress gear spins forever. For the time being, at least, my mouse functions as expected.
I have trashed mouse prefs and rebooted, but that did not solve the problem. -
InDesign files won't open with double click
InDesign files won't open with double click on my MacPro with Snow Leopard although they do open from external hard drives when I double click.
Thank you very much,you were correct, it appears the mouse clicks were set too fast. Thank you very much indeed for taking the time to answer my question.
Regards,
Mag1975 -
I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?
You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file". -
Unable to close open apps with double clicking the button and when I tap screen does not respond?
Cannot not close open apps with double clicking the button Since downloading iOS8.
What happens when you try? Does double clicking the ?home button bring up the Task Bar of recently used apps? If so what happens when you flick up on the preview screen for the app you want to close?
To quit an app double click the Home button to reveal the row of recently used apps. Flick up on the page preview and it will fly away and disappear. That quits the app. -
Events will not open with double click/double click not working.
Have just upgraded to iPhoto'11 and finding it a pain to use after previous iPhoto. Events will not open with double click (even though highlighted in yellow) and photos will not open with double click or videos play. How can we fix this please?
That sounds very like an issue with your mouse/trackpad and not iPhoto. Go to your SystemPreferences and chck the speed you've set for double clicking
Regards
TD -
FS10N Not display document with double click
Hi, friends:
Not display document with double click
I am in the list of open items in transaction FS10N and when a wont to see a document by doing a double click in the line, instead of showing the document it shows the data of the line.
Does anybody know the reason behind it? How can I resolve it?
Thanks in advance.Hello,
There could be two reasons:
1. The account would not have been maintained with line item display.
2. In case if the account has been created with line item display, then still you are not able to get the drill down (meaning that you are able to get the line items in FBL3N), in that case, immediately once you get the error, go to transaction code SU53. It will tell you the authorizations you are missing. You can forward that screen shot to your authorization team and they will give your proper authorization for drill down.
Thanks,
Ravi -
I have been sent a secure CD of zip folders but double clicking only comes up with the message unable to unarchive, error 1 - operation not permitted, any ideas please?
First thing coming to mind:
do you double-click on the zip files on the CD ?
Maybe the "unzip" tries to write in-place to the CD which of course is not possible.
Have you tried to copy one of them to your OSX volume/harddisk and thhen double-click the copy ?
Stefan -
Master pages won't open with double click
What am I missing? I've used Indesign for years. Have CS6 now. When I double click on a master page, it won't open. This happens with old documents and with new ones as well.
BarbI realized that I can't open anything with a double click, not just InDesign. In searching for an answer, I found an answer. When I installed a new mouse, I turned the speed on everything to high, fast, super speedy. When I slowed down the double click speed, I could open anything. Whew!
I solved the problem. If you go to System Preferences > Accessibility > Mouse and Trackpad - You can set the speed of the double click to be much slower. -
Open file from table with double click
Hi all,
I use adf faces and JDEV 11.
I want to open a file by double clicking on row in a table. (file is stored in the database).
I first tried it with a button to open the file, with this code:
System.out.println("Double click!");
BindingContainer bindings = this.getBindings();
DCIteratorBinding iter = (DCIteratorBinding)bindings.get("XxahelpBezoekRapDocView1Iterator");
Row row = iter.getCurrentRow();
FacesContext fc = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)fc.getExternalContext().getResponse();
response.setHeader("Content-Disposition","attachment; filename=\""+row.getAttribute("Filename").toString()+"\"");
response.setHeader("cache-control", "no-cache");
try {
InputStream in;
in = ((BlobDomain)row.getAttribute("Bijlage")).getInputStream();
ServletOutputStream out = response.getOutputStream();
writeInputStreamToOutputStream(in, out);
fc.responseComplete();
} catch (IOException e) {
e.printStackTrace();
} This is working fine.
Now I wan't to open the file with double clicking on a row.
For opening the file I use the same code in the backing bean and this code on the page:
<f:facet name="metaContainer">
<af:group>
<trh:script>
goEditRow = function(event) {
AdfCustomEvent.queue( event.getSource(), "doubleClickOnRow", {}, false);
</trh:script>
</af:group>
</f:facet>And a clientListener and serverListener on the table:
<af:clientListener method="goEditRow" type="dblClick"/>
<af:serverListener type="doubleClickOnRow" method="#{backingBeanScope.backing_pages_EditTicket.doubleClick}"/>The only thing that happens when I double click is that I see "Double click!" in the console. But I can't save the file :S
What is the problem?
Thanks in advance.Hi
What we do is to pick a table column for downloading the file.
We change the component in the column to the an af:commandLink and add an
af:fileDownLoadActionListener to the command link.
The user clicks on the link to download (open) the file.
Its not exactly the same as what you requested (double
click on the row) but it might be another solution.
Regards
Paul -
Why can't I open files with double click, etc?
Hello, all,
I have been having problems with my MacBook (Aluminum late 2008, I think, OS 10.5). It runs slowly; files on the desktop and in my "Macintosh HD" often won't open with double-click but have to be opened with File-->Open; there are Word Work Files that won't go away; the trackpad is often stiff and not very responsive; clicking on the mouse is very stiff, despite very easy settings. In short, a lot of things are sluggish. Sometimes, also, I get the spinning beach ball, but not all the time.
I have run disk permissons repair from Disk Utility many times (both from the desktop and from the MacBook install disk); I have replaced the directory with Disk Warrior at least twice; I have verified that the disk is OK; I have zapped the PRAM; and done other things of that kind.
I took the MacBook to an Apple Store yesterday. It had been unplugged and much to my surprise, most everything seemed to be working all right. When I opened it today, however, I found everything as it was before I took it to Apple. Including the Word Work files, which I thought were gone.
If I recall correctly, this started when I was working on a long editing project in Word, but I don't know whether that has anything to do with what has happened. I've done similarly long projects before, and this never happened.
I could try trashing the Word Work files (there seem also to be quite a lot of folders with "recovered" files), but I don't want to do that unless I can be assured that nothing bad will come from doing that.
I know this seems quite comprehensive, and may involve several issues, but I'm really unhappy about this and would love to think there is something more I can do, apart from returning to the Apple Store. Besides everything else, how can I khow that I won't find, again, that the MacBook will work fine there but goes back to its troubled state when I return?
Clues, anyone?
Thanks,
jennyHi, Mike,
I have 211.59 left out of total HD space of 232.57.Space should not be a problem. I'll try using Activity Monitor today. I have 2 GB of memory. But since this is the first time I[ve had this problem, I don't see how it could be a problem with memory, do you?
I finished the project more than a week ago. After I shut down the computer, it temporarily returned to normal but subsewuently started acting odd again, although I've done nothing but email since I turned it on again.
I am going to try getting rid of the Word Work files and see whether that helps. I am wondering whether the book I was working on had something wrong with it (it was written in NeoOffice but opened in Word), or my copy of Word has gotten corrupted. Although I haven't used Word since I finished with the book.
Sorry this font is so tiny, but although I was able to choose my font in my original message, there doesnt' seem to be a place to do that here. At least, I don't see it.
I'll get back to you on the Activity Monitor. Thanks.
jenny -
How can i show details in ALV GRID with double click in a row?
Hello, ich try to show the details of a row with double click in the line,
but it doesn't work!?
I have a eventhandler for doubleclick and the program run this code, but what i have to do, to show the details!?
I try it with some methods like cl_gui_cfw=>set_new_ok_code, ...
i think about the methods cl_gui_alv_grid->show_detail, but this method is private,
i can create a class with inheritance of the cl_gui_alv_grid class and try this method!?
Have anybody any ideas!?Hello Lars
The following sample reports shows an ALV list with company codes. Double-clicking on any company code will open a second ALV list displaying all customers.
*& Report ZUS_SDN_ALVGRID_EVENTS_1
REPORT zus_sdn_alvgrid_events_1.
DATA:
gd_okcode TYPE ui_func,
gt_fcat TYPE lvc_t_fcat,
go_docking TYPE REF TO cl_gui_docking_container,
go_docking2 TYPE REF TO cl_gui_docking_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_t001 TYPE STANDARD TABLE OF t001,
gt_knb1 TYPE STANDARD TABLE OF knb1.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_t001 TYPE t001,
ls_col_id TYPE lvc_s_col.
CHECK ( sender = go_grid1 ).
READ TABLE gt_t001 INTO ls_t001 INDEX e_row-index.
CHECK ( ls_t001-bukrs IS NOT INITIAL ).
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = ls_t001-bukrs.
IF ( syst-subrc NE 0 ).
MESSAGE 'No customers found' TYPE 'S'.
ELSE.
* Trigger PAI of dynpro '0100' and set new ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'CALL_SCREEN_0200' ).
ENDIF.
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
REFRESH: gt_knb1.
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_docking2
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_docking
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_docking2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_double_click FOR go_grid1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'T001'
CHANGING
it_outtab = gt_t001
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'KNB1'
CHANGING
it_outtab = gt_knb1
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking2->link
EXPORTING
repid = syst-repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
WHEN 'CALL_SCREEN_0200'.
go_grid2->refresh_table_display( ). " necessary
CALL SCREEN '0200'.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
Regards
Uwe -
Mouse failing to open folders and files with double click.
Mouse suddenly decided not to open anything with double click. It will highlight with single click but will not open files. Could I have a broken mouse? Could a virus be causing this? I have checked the mouse settings under System preferences and made sure my pc-using children have not set the mouse to second-click status. Any ideas?
Check back in system preferences > mouse > Double-click speed. Move the slider to the slower end of the scale.
Regards
Maybe you are looking for
-
Information on Business Process Monitoring
Hello experts, I want to know if there is a way to monitor spool jobs in business process monitoring or other tool? I assume that I can monitor background jobs with BPMon but I don't find where I can monitor the content of the spool generated by the
-
HI THR , HERE THE CLIENT IS PRODUCING PRT (diE) IN-HOUSE . WHAT WILL BE THE CHANGES IN THE MASTER DATA (MAT MASTER, BOM, ROUTING/TASK LIST ETC ) AND IN TRANSACTION DATA (PRODN. ORDER). REGARDS
-
I have problem of retrieving data from dynamic sql query. I have select 'select * from some_table' from dual and I have to execute in dynamic page or report inner statement. htp.p not help I will appreciate any help from anybody.
-
Why can't I download the free Apple apps for my new iPhone 5S? It was set up in store and restored from my iPod Touch 5.
-
Unable to locate control file jcx
Our portal application is deployed as EXPLODED EAR in development. When we declare and call a DB control in a JPF page, which is already declared in the pageflow as a control using the * @common:control annotation. The application works fine in works