Bridge cs6 . I can't select more than 1 file even when I use ctrl and select a few files. Bridge will just open them indivudually.It was working properly a week ago.

I cannot open multiple files on Bridge cs6 on my pc. I hold down ctrl. but it just opens them individually. This function was working in the past. caps lock is off, nothing has changed....help.

As I select a file, it will launch its application automatically. Therefore I can not select multiple files or just single files without opening the application.
I did not have this problem before. I started having this problem after I updated my system to OS X Yosemite.
I tried to reset Bridge preferences, installed updates, but nothing worked so far.
Can anybody help?

Similar Messages

Compressor will not import any file. Anybody have an idea? It was working fine 2 weeks ago.

Compressor will not let me import any type of file. I can not export a sequence from Final Cut through Compressor either. Anyone else have this problem or have a soulution. It was working 2 weeks ago.

.. but my history window does not fuction.
It makes sense that past history is gone as it is blown out as part of the compressor repair process.
Or, do you mean Compressor does not keep track of current projects added to the que (aka history)?
x

My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

Can we send more than 50 files ...even at the cost of a more expensive subscription level?

Can we send more than 50 files ...even at the cost of a more expensive subscription level?
Thanks.

Hi Val,
Nice to see you in the forums again!
There is currently just the one subscription level for Adobe Send. If you want to send more than 50 files per transaction, you can try zipping up some or all of the files and sending them in batches. However, the ZIP files can't be previewed by your recipients, and tracking information pertains only to the full ZIP file.
Best,
Sara

Can't relink more than 1 file at a time

I'm trying to relink media I have on an external firewire drive, but when I click Relink, FCP only relinks the first file in my list. The files are all there, in the same location, and have not had any name or reel changes - each one relinks fine individually, but I can't get FCP to link more than 1 file at a time.
Procedures: I select all the files from a certain reel that are listed as being offline, then File>Reconnect Media. All the files I've selected are listed in the top half of the window, with the first file underlined. I have Search Single Location checked. I select Locate (though same thing happens if I select Search at locate the file myself), Show: Video Files (tho same thing happens if I select All Files), I've checked Match Name and Reel Only (though again same thing happens if this is not checked), and I checked Reconnect All Files in Relative Path. FCP finds the first file, and I click "Choose" - and the first file is listed in the bottom part of the window, but only that file.
Everything else in FCP works fine. Is it possible I'm running into problems because of the very large number of clips I have in the project (12,000 so far)?
FCP 6.0 running on G5 dual 2 gig, OSX 10.4.9
Thanks for any suggestions.
Tom Valens
Tamalpais Productions
Forest Knolls, CA

That is a bug in FCP 6 and 6.0.1...to fix it you need to upgrade to FCP 6.0.2.
Shane

How can I write more than 32k file in oracle directory

Hi experts,
I am struggling while I write more than 32k file size in oracle directory, and throws an error ‘ORA-06502: PL/SQL: numeric or value error, like this.
This is my procedure
declare
l_s_filename   UTL_FILE.file_type;
begin
   l_s_filename := UTL_FILE.fopen ('INFO_MIGRATION', 'finfinne.txt', 'W');
FOR rec
      IN ( SELECT SQL_REDO
              FROM V$LOGMNR_CONTENTS
             WHERE seg_owner <> 'SYS' AND username = 'GENTEST'
             AND TABLE_NAME NOT LIKE '%_TEMP'
                   AND OPERATION IN ('UPDATE','INSERT','DELETE')
          ORDER BY TIMESTAMP)
   LOOP
      UTL_FILE.put_line (l_s_filename, rec.SQL_REDO);
   END LOOP;
   UTL_FILE.fclose (l_s_filename);
end;can any please help me how can I overcome this problem
Thanks,
Arun

You can write by breaking it into small chunks. Also you can try to use DBMS_XSLPROCESSOR.CLOB2FILE. For UTL_FILE the code snippets may looks like
-- Read chunks of the CLOB and write them to the file
-- until complete.
   WHILE l_pos < l_blob_len
   LOOP
      DBMS_LOB.READ (rec.l_clob, l_amount, l_pos, l_buffer);
      UTL_FILE.put_line (l_file, l_buffer, FALSE);
      l_pos := l_pos + l_amount;
   END LOOP;

How can i transfer more than one file from server to client

Hi,
our requirement is transfer more than one files from server to client using the
webutil_file_transfer.as_to_client_with_progress.One file transfer is already working in our system.If anybody know the solution please inform
regards
mat

just an idea ...
for this purpose let us put aside security concerns and other potential problems....
-- Get the content of a server directory with Filter and create zip file
1) create a class that implements java.io.FilenameFilter ...
2) define accept() method ...
3) call File.list() with the filter as a parameter. The returned array of strings will have all the names that passed through the accept() filter
4) use java.util.Zip to create ZIP file on the server side
-- I think it is better to create this functionality as a separate Java class, put it in required folder and after it
-- use Forms->Program->"Import Java class" to create pl/sql wrappers, than to create wrappers for all classes and code in pl/sql
5) use webutil to transfer file on the client
6) use Java on client side to unzip transferred file
if you think this is not too complicated, you should try ...
Regards,
Vladimir

How can I combine more than 12 files at a time.

I'm trying to turn a 25 page comic book into a pdf file. However the combine function won't allow me more than 12 files.
Please help.

Hi Eddie,
You'll have to combine the documents in groups. 12 pages, then the next 12 pages into 2 combined PDF files. Then combine all those 2 files plus the last page.
-David

PSE13 repeatedly crashing when opening more than one file at a time to layer images. [was: Feeling very frustrated.]

Just bought Photoshop Elements 13. I have a Macbook Pro that meets all the requirements. I have installed and reinstalled the program but it just keeps crashing. The program will load, when I choose the expert tab and try to open more than one file at a time to layer images it just crashes and says "Photoshop Elements has closed unexpectedly" Can anyone help me please?

mikeobe wrote:
OK, kinda slooow here, I hope I'm not trying your patience!? If I understand you correctly, install dummy drivers and then the drivers that came with my printer, Designating NO default printer! Then when I need to use the printer I will have to declare which one each and every time?
Or, just intall by new printer but do not Delcare it as the Default printer, I guess in this instance there would be NO default printer?
You may not even have the problem!
Have you installed the new printer yet?
There are many more people who don't see it happen than those who do.
PS: there is always a default printer.

Can't open mail on Facebook, can't write more than 2 lines in the status on Facebook and there are no "older posts" showing on Facebook

This is regarding Facebook: I can no longer open mailbox to receive or send. The result is a white page with the Facebook index on the left. I can no longer write more than 2 lines in status updates. Lastly, the "older posts" that is usually at the bottom of the page is no longer there. Incidentally, all these things work in IE. There's nothing in Facebook referring to these issues except to say it doesn't support Firefox 3.6.8.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

HT204053 can I use more than one email address on icloud (using iphone and mac)?

I have an email account which seems to be using icloud, and I want to add another email account so that I can access it via icloud. Is it possible to have more than one email address on icloud? I have an iphone 5 and a macbook.

You can only have one email account for each iCloud account. You can create up to three alias addresses, but these will still receive email in the current account inbox. This explains how to create an alias if you want to do this: http://support.apple.com/kb/PH2622.
You can create a second ("secondary") iCloud account on your device by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud and entering a different iCloud ID. This will give you second iCloud email account but it will only be fetch email (not push). Also, you can only create a maximum of three iCloud accounts on each device so this would use one of your allotted accounts.

Not able to create More than 1 Partition in USB Drive using kernel32 and DeviceIoControl

I have successfully created 2 or more partitions in USB drive using DeviceIoControl in C++. Now I am trying to convert this code into C# using kernel32 and DeviceIoControl. But I am not getting more than 1 partition. Can anybody tell me what is wrong
with this code?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Diagnostics;
using System.Runtime.InteropServices;
namespace PartitionWrapper
public class IOWrapper
public static bool CreatePartitions(string selectedDrive)
bool RetCode = false;
try
bool bSuccess = false;
uint dwBytesReturned = 0;
IntPtr hDisk = OpenVolume(selectedDrive);
if (hDisk == null || hDisk == FSConstants.INVALID_HANDLE_VALUE)
RetCode = false;
goto FINAL;
bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_DELETE_DRIVE_LAYOUT, IntPtr.Zero, 0, default(IntPtr), default(uint), ref dwBytesReturned);
// Get the partition information
uint PartitionInfomations = (uint)(Marshal.SizeOf(typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX)) + 3 * Marshal.SizeOf(typeof(FSStructures.PARTITION_INFORMATION_EX)));
byte[] DBuffer = new byte[PartitionInfomations];
GCHandle handle = GCHandle.Alloc(DBuffer, GCHandleType.Pinned);
FSStructures.DRIVE_LAYOUT_INFORMATION_EX pDriveLayout = (FSStructures.DRIVE_LAYOUT_INFORMATION_EX)Marshal.PtrToStructure(handle.AddrOfPinnedObject(), typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX));
IntPtr pDriveLayoutPtr = Marshal.AllocHGlobal(Marshal.SizeOf(pDriveLayout));
Marshal.StructureToPtr(pDriveLayout, pDriveLayoutPtr, false);
// bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_GET_DRIVE_LAYOUT_EX, default(IntPtr), default(uint), pDriveLayoutPtr, PartitionInfomations, ref dwBytesReturned);
pDriveLayout = (FSStructures.DRIVE_LAYOUT_INFORMATION_EX)Marshal.PtrToStructure(pDriveLayoutPtr, typeof(FSStructures.DRIVE_LAYOUT_INFORMATION_EX));
if (bSuccess || dwBytesReturned != PartitionInfomations)
RetCode = true;
else { RetCode = false; goto FINAL; }
pDriveLayout.PartitionEntry = new FSStructures.PARTITION_INFORMATION_EX[0x16];
pDriveLayout.PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
pDriveLayout.PartitionCount = 4;
pDriveLayout.DriveLayoutInformatiton.Mbr.Signature = 0xA4B57300;
pDriveLayout.PartitionEntry[0] = new FSStructures.PARTITION_INFORMATION_EX();
pDriveLayout.PartitionEntry[0].PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
pDriveLayout.PartitionEntry[0].Mbr.BootIndicator = true;
pDriveLayout.PartitionEntry[0].Mbr.RecognizedPartition = true;
pDriveLayout.PartitionEntry[0].Mbr.PartitionType = 0x0B;
pDriveLayout.PartitionEntry[0].PartitionNumber = 1;
pDriveLayout.PartitionEntry[0].StartingOffset = 32256;
pDriveLayout.PartitionEntry[0].PartitionLength = 3221225472;
pDriveLayout.PartitionEntry[0].RewritePartition = true;
pDriveLayout.PartitionEntry[0].Mbr.HiddenSectors = 32256 / 512;
pDriveLayout.PartitionEntry[1] = new FSStructures.PARTITION_INFORMATION_EX();
pDriveLayout.PartitionEntry[1].PartitionStyle = FSStructures.PARTITION_STYLE.MasterBootRecord;
pDriveLayout.PartitionEntry[1].Mbr.BootIndicator = false;
pDriveLayout.PartitionEntry[1].Mbr.RecognizedPartition = true;
pDriveLayout.PartitionEntry[1].Mbr.PartitionType = 0x0B;
pDriveLayout.PartitionEntry[1].PartitionNumber = 2;
pDriveLayout.PartitionEntry[1].StartingOffset = 32256 + 3221225472;
pDriveLayout.PartitionEntry[1].PartitionLength = 2147483648; //2147483648;//3221225472;
pDriveLayout.PartitionEntry[1].RewritePartition = true;
pDriveLayout.PartitionEntry[1].Mbr.HiddenSectors = 32256 / 512;
for (int i = 0; i < pDriveLayout.PartitionEntry.Length; i++)
pDriveLayout.PartitionEntry[i].RewritePartition = true;
try
bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_SET_DRIVE_LAYOUT_EX, ref pDriveLayout, PartitionInfomations, default(IntPtr), default(uint), ref dwBytesReturned);
catch (Exception ex)
if (bSuccess)
RetCode = true;
else { RetCode = false; }
bSuccess = FSStructures.DeviceIoControl(hDisk, FSConstants.IOCTL_DISK_UPDATE_PROPERTIES, IntPtr.Zero, 0, default(IntPtr), default(uint), ref dwBytesReturned);
if (bSuccess)
RetCode = true;
else { RetCode = false; }
FINAL:
// Close the disk handle.
if (hDisk != null && hDisk != FSConstants.INVALID_HANDLE_VALUE)
FSStructures.CloseHandle(hDisk);
catch { return false; }
return RetCode;
private static IntPtr OpenVolume(string DeviceName)
try
IntPtr hDevice;
hDevice = FSStructures.CreateFile(
@"\\.\" + DeviceName,
FSConstants.GENERIC_EXECUTE | FSConstants.GENERIC_READ | FSConstants.GENERIC_WRITE | FSConstants.FILE_SHARE_READ | FSConstants.FILE_SHARE_WRITE,
FSConstants.FILE_SHARE_WRITE,
IntPtr.Zero,
FSConstants.OPEN_EXISTING,
0,
IntPtr.Zero);
if ((int)hDevice == -1)
throw new Exception(Marshal.GetLastWin32Error().ToString());
return hDevice;
catch { return FSConstants.INVALID_HANDLE_VALUE; }
internal static class FSConstants
public const uint FILE_SHARE_READ = 0x00000001;
public const uint FILE_SHARE_WRITE = 0x00000002;
public const uint OPEN_EXISTING = 3;
public const int GENERIC_EXECUTE = 0x10000000;
public const uint GENERIC_READ = (0x80000000);
public const uint GENERIC_WRITE = (0x40000000);
public static IntPtr INVALID_HANDLE_VALUE = new IntPtr(-1);
public const uint IOCTL_DISK_GET_DRIVE_LAYOUT_EX = 0x00070050;
public const uint IOCTL_DISK_SET_DRIVE_LAYOUT_EX = 0x7C054;
public const int IOCTL_DISK_UPDATE_PROPERTIES = 0x70140;
public const int IOCTL_DISK_DELETE_DRIVE_LAYOUT = 0x0007c010;
public const int IOCTL_DISK_CREATE_DISK = 0x7C058;
internal static class FSStructures
[DllImport("kernel32.dll", EntryPoint = "CreateFile", SetLastError = true)]
public static extern IntPtr CreateFile(
string lpFileName,
uint dwDesiredAccess,
uint dwShareMode,
IntPtr lpSecurityAttributes,
uint dwCreationDisposition,
uint dwFlagsAndAttributes,
IntPtr hTemplateFile);
[DllImport("kernel32.dll", SetLastError = true)]
public static extern int CloseHandle(IntPtr hObject);
[DllImport("kernel32.dll", SetLastError = true)]
public static extern bool DeviceIoControl(
IntPtr hDevice,
uint dwIoControlCode,
[Optional]ref DRIVE_LAYOUT_INFORMATION_EX lpInBuffer,
uint nInBufferSize,
[Optional] [Out] IntPtr lpOutBuffer,
uint nOutBufferSize,
[Optional] ref uint lpBytesReturned,
[Optional] IntPtr lpOverlapped);
[DllImport("kernel32.dll", SetLastError = true)]
public static extern bool DeviceIoControl(
IntPtr hDevice,
uint dwIoControlCode,
IntPtr lpInBuffer,
uint nInBufferSize,
[Optional] [Out] IntPtr lpOutBuffer,
uint nOutBufferSize,
[Optional] ref uint lpBytesReturned,
[Optional] IntPtr lpOverlapped);
[StructLayout(LayoutKind.Sequential)]
public struct DRIVE_LAYOUT_INFORMATION_EX
public PARTITION_STYLE PartitionStyle;
public int PartitionCount;
public DRIVE_LAYOUT_INFORMATION_UNION DriveLayoutInformatiton;
[MarshalAs(UnmanagedType.ByValArray, ArraySubType = UnmanagedType.Struct, SizeConst = 0x16)]
public PARTITION_INFORMATION_EX[] PartitionEntry;
[StructLayout(LayoutKind.Sequential)]
public struct PARTITION_INFORMATION_EX
[MarshalAs(UnmanagedType.U4)]
public PARTITION_STYLE PartitionStyle;
public long StartingOffset;
public long PartitionLength;
public int PartitionNumber;
public bool RewritePartition;
public PARTITION_INFORMATION_MBR Mbr;
public PARTITION_INFORMATION_GPT Gpt;
[StructLayout(LayoutKind.Sequential)]
public struct PARTITION_INFORMATION_MBR
public byte PartitionType;
[MarshalAs(UnmanagedType.U1)]
public bool BootIndicator;
[MarshalAs(UnmanagedType.U1)]
public bool RecognizedPartition;
public uint HiddenSectors;
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)]
public struct PARTITION_INFORMATION_GPT
public Guid PartitionType;
public Guid PartitionId;
[MarshalAs(UnmanagedType.U8)]
public EFIPartitionAttributes Attributes;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 36)]
public string Name;
[Flags]
public enum EFIPartitionAttributes : ulong
GPT_ATTRIBUTE_PLATFORM_REQUIRED = 0x0000000000000001,
LegacyBIOSBootable = 0x0000000000000004,
GPT_BASIC_DATA_ATTRIBUTE_NO_DRIVE_LETTER = 0x8000000000000000,
GPT_BASIC_DATA_ATTRIBUTE_HIDDEN = 0x4000000000000000,
GPT_BASIC_DATA_ATTRIBUTE_SHADOW_COPY = 0x2000000000000000,
GPT_BASIC_DATA_ATTRIBUTE_READ_ONLY = 0x1000000000000000
[StructLayout(LayoutKind.Explicit)]
public struct DRIVE_LAYOUT_INFORMATION_UNION
[FieldOffset(0)]
public DRIVE_LAYOUT_INFORMATION_MBR Mbr;
[FieldOffset(0)]
public DRIVE_LAYOUT_INFORMATION_GPT Gpt;
[StructLayout(LayoutKind.Sequential)]
public struct DRIVE_LAYOUT_INFORMATION_GPT
public Guid DiskId;
public long StartingUsableOffset;
public long UsableLength;
public int MaxPartitionCount;
[StructLayout(LayoutKind.Sequential)]
public struct DRIVE_LAYOUT_INFORMATION_MBR
public uint Signature;
public enum PARTITION_STYLE : int
MasterBootRecord = 0,
GuidPartitionTable = 1,
Raw = 2

Hello,
in the links below you can found many informations to help you:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa365730(v=vs.85).aspx
http://www.codeproject.com/Articles/696388/Recover-Data-From-Corrupted-Drives-File-Systems-FA
http://www.functionx.com/vcsharp/fileprocessing/drives.htm
http://forums.codeguru.com/showthread.php?548305-partitioning-USB-Falsh-drive
http://forums.codeguru.com/showthread.php?548169-USB-Flash-drive-Partitioning

9i can't connect to a data base, even when I use another user's tnanames.or

I can't connect to a data base, even using tnsping with a tnanames.ora file that I copied from a user's PC that was able to connect. It's a new install of 9i on my PC. What did I miss? I'm on a Win 2000 box and Oracle is on a UNIX server.
Here's the description from the tnsnames.ora file:
HISTA02A =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = bkodv1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = HISTA02)
The file is from the previous version 8.1.7, should that matter? 9.2.0.1 is the server now.

Yes, I even pinged it to make sure. When I do a tnsping HISTA02 I get :
C:\>tnsping HISTA02
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 28-FEB-2007 14:25:53
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\Local\network\ADMIN\sqlnet.ora
TNS-03505: Failed to resolve name
My SQLNT.ora looks like this:
# SQLNET.ORA Network Configuration File: C:\orant\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DEFAULT_DOMAIN = cboent.cboe.com
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)

Can't do more than one thing at a time using the internet

Hi
I've recently bought a Mac Book Pro and it detected my existing wireless connection and connected to my Belkin router without a problem.
I've noticed however that if, for example, I'm uploading a video to YouTube, or some photos online, I can't then connect to anything else on the internet either via a new tab or a new internet window. When I try to do so it searches for a while (and this happens on both Safari and Firefox) and then comes up with a "Server not found" error message. It feels as though the uploading is closing any other access to the internet.
I didn't have any problems doing simultaneous internet access when I was using the same router/wireless set up with my PC, so I think it must be something I haven't done with the Mac?
Any help really gratefully received!
Neil

Please repost this in the MacBook Pro Forum, where it's more likely someone can help you, or create a new thread in that forum, with a reference to this thread.

How can I attach more than one file , whenever I attach more than one and I send it just sits there. If I send just one it goes thru , what am I doing wrong.

I use 1and 1 webmail for e-mail and there isn't a way to addin my webmail acct. what should I do. in "mailto" in FF I selected "other" should I do that or check something else.

How about performing the update IN the database using a stored
procedure?
By using non-database fields on your form to get the
information, you can then call the procedure in the database to
perform the updates. If an error occurs in the procedure you
rollback, if necessary, and send a message or status back to the
form. If it succeeds you might wish to commit and then re-
execute the form's query -- using either the original key values
or the new key values...
null

Bridge cs6 . I can't select more than 1 file even when I use ctrl and select a few files. Bridge will just open them indivudually.It was working properly a week ago.

Similar Messages

Maybe you are looking for