Bridge_cs6: If I click with the right mouse key on a pictures, it needs 10 sec to open the menue

My CS5_Bridge works very good. I have no idea about the mistake. During the 10 secs waiting I hear the Harddisk starting. Please help If you can. I have downloaded the newest updates.
Klaus Haller
[email protected]

Waiting for hard disk spinup?  Do you have your system's power options to turn off hard disk after some number of minutes?
Seems a very good catch to me Robert

Similar Messages

  • When I use Mail and want to paste an emailadress with a right mouse click in the adres field this doesn't work, ofcourse cmd V  works. How can I solve this

    when I use Mail and want to paste an emailadress with a right mouse click in the adres field this doesn't work, ofcourse cmd V  works. How can I solve this

    YAY!  That did it.
    Thank you so much.
    And a Very Happy and Prosperous New Year to you!
    bonnie

  • Why can't i access or click on the menu options at the top of ANY web page? Also, Can't close a moddle window using the x in the upper right,?

    Why can't i access or click on the menu options at the top of ANY web page? Also, Can't close a moddle window using the x in the upper right,?

    Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode

  • Earliar i can remove any selection in the page from right mouse key now i can't

    earliar i can remove any selection in the page from right mouse key now i can't

    See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
    See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
    * [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols

  • I am trying to get the most speed out of the browser, instructions say to type about:config in the address bar and hit enter, I did this. It now says to rt. click, from the menu select "New" then "Integer", I cannot find "New", I need better directions.

    when I typed in about:config in the address bar and hie enter, what appeared looked like a lot of files, pages of them, I didn't know where to right click from the menu select "New"

    Which prefs to you want to change?
    It is not recommended to change prefs in order to tweak some settings.<br />
    Do you have specific problems?

  • Strange behavior when I try to match a mpeg2 video with the menu size image

    hello all,
    got a strange behavior when I try to match a mpeg2 video with the menu size image,
    menu size is 1920 x 1080 (photoshop file)
    mpeg2 video 1920 x 1080 (1second 19 frames)
    the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
    I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
    everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
    why encore treats the video size and picture differently?
    it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
    thankl you all

    Hi all
    I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
    Using Encore,PS,AE CS4
    DVD format SD PAL DV widescreen
    I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
    In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
    When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
    Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
    In the properties panel the menu Aspect Ratio 16:9
    The AE transistions PAR is SD PALwidescreen 1.4587.
    I did try the Blu Ray suggestion above but the same distortion was apparent.
    Any suggestions short of squashing the video to match the menu would be welcomed.
    Thanks

  • I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

    I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

    Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty.  That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu. 
    Click to view full size
    If there is an item in there drag it out.
    OT

  • ID & password is NOT working with the Menu Bar CC icon

    ID & password that I use for the Adobe CC web page login is NOT working with the Menu Bar CC icon (Mac OS 10.10.2). I have two updates to download, but the ID and/or password is rejected. Also the the "Hint" field is blank.https://forums.adobe.com/discussion/create.jspa?containerType=14&containerID=4670&question =true&subject=ID+%26+password+…

    If the is prompts like Creative Cloud wants to make changes to system :  Please enter Mac username and Password.

  • I clicked on the "menu" link on a restaurant's website and **** came up. When I hit the back button, it just went to more ****. Could my phone be hacked via this link?

    I clicked on the "menu" tab of a restaurant website but **** came up. I clicked the back arrow but instead of taking me back to the restaurant site, it was more ****. Is my iPhone at risk of being hacked or infected by this incident?

    Your iPhone is not hacked, unless it has been jailbroken by you or someone else using your device.
    The website you visited may have been hacked, however, so that the link you clicked redirects you to that adult site instead.  Contact the restaurant and let them know what's happening.

  • Problem with the Menu Button in the dashboard

    Hello Everyone,
    This is my first post to SAP Forum.
    I have developed a Dashboard in ALV and i have used some buttons for the further processes on the ALV.
    I have used a Menu Button and Declared it in Handle_Menu_Button method of the Class and in the implementation i have given one option in the menu. The Program is Syntactically Correct the Only thing is that when it executes and when i click on the Menu Button First time it Refreshes itself and shows nothing but when i click on the second time it shows me the Menu.
    Why it is So??? Please Help Me Out.
    Thank you and Regards.................

    Hi Brahmananda,
    Please try to understand the flow of program and the screen navigation
    the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
    try using
    in PAI
    module exit at exit-command
    in program
    module exit
    case ok_code
    when 'BACK'.
    LEAVE PROGRAM ( or any thing that you want it to be )
    endcase
    endmodule
    regards
    Ramchander rao.K

  • Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

    Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

    Usually that error can be cleared up by renaming the personal config folder. Turn on your OS's hidden files and then go to...
    C: > Users > your username > AppData > Roaming > Dreamweaver (version) > your language > configuration
    Rename the configuration folder configuration-old and start DW up. That should create an entirely new configuration folder and correct the menu.xml file.

  • DDP/IMG difference possible? Problems with the menu.

    Hej,
    I exported an IMG and a DDP from Encore CS5. The IMG was burned as a DVD-Video. The DDP was burned as Data to a DVD.
    Both were sent to a replicator. They made a few hundred copies from the DDP.
    The resulting DVDs have a bug on most standalone DVD-Players and on MACs (tested with MacBook and MacBookPro): If you do nothing in the menu for a few seconds it is not possible to select any menu item anymore. The menu has a motion background and music in a loop. But the problem occurs before the loop is played through one time.
    BUT ... the DVD-Video from the IMG works fine.
    My problem is that I can not determine if Encored did something diffrent with the DDP or if the replicator itnroduced this strange bug somehow.
    I have no software available to burn the DDP and see for myself if that works.
    So my questions are:
    - Has someone experienced differences between DDPs and IMGs?
    - Has someone experienced the same wired bug with the menu?
    Cheers
    Erik

    Hello,
    thanks for the offer to check it. But in the meantime I retransmitted (this time as a download) the same image (IMG not DDP as I feared there was something wrong with the DDP) I already gave them. The new batch of DVDs work fine. I guess I will never find out what happend because their communication is rather strange. Either something went wrong on the way with the first image (burning/reading) or they messed something up on their side and would not tell.
    Cheers
    Erik

  • I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

    I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

    hi there,
    try booting into safe mode, by pressing the Shift button once you hear the startup sound.
    Hope this helps,
    Chris

  • I cannot access my gmail. I follow the instructions to click on the menu and then on settings, but there is not a setting icon.

    I have a new computer. I cannot access some of my sites, such as gmail. The instructions that I keep getting are to click on the chrome menu and then select settings. When I click on the menu, I cannot find an icon for settings. I have tried everything I can think of to no avail. Nothing works!

    What happens if you try to open https://mail.google.com/ ? Do you get a "page not found" error, or a security certificate error, etc.?
    Firefox has a "3-bar" menu similar to Google Chrome, and you should find Options there, but if you have instructions for the Chrome settings page, they aren't going to match Firefox's Options dialog...

  • With version 3.6.3 I can no longer do a right click with the mouse and check the properties of a live url link on web pages

    Windows XP Pro, SP3. Firefox 3.6.3. Ever since updating to this version a few weeks ago I can no longer do a right click of the mouse and check the properties of an active url link on webpages. I've always had the option before. I want this feature back!!!!

    In Firefox 3.6 Properties has been removed from the right click context menu.
    You can use ''View Image Info'' or ''View Page Info'' in the right click context menu to see the (image) properties.
    You can use the above mentioned extension (Element Properties 6) to get that context menu item back.
    See also Link And Forminfo: https://addons.mozilla.org/firefox/addon/6939

Maybe you are looking for

  • Deduction of Excise duty of Scrap Material in Depot

    Hi, Can anyone suggest how to reduce the excise amount of scrap in the depot scenerio(from mm point view) Regards, Ru

  • OIM Custom validation on entitlement request submission.

    Hi, We have a requirement in OIM to do some custom validation on entitlement request submission through catalogue. Can we leverage the requestdatavalidator here. Is there any other way of doing it? Thanks in advance,

  • FMIFIIT and FMIOI inconsitent with FMAVCT

    Hi: I am facing an issue while reconciling budget data for my client. FMAVCT summary amount is when consolidated for local currency is not tallying with the sum of FMIFIIT and FMIOI. I came to know to that funded program was not part of control objec

  • Earbusting zap noise on sound initialization

    Anybody know what in is causing this?  I had OSS installed before and tried to switch back to alsa.  Sound works at correct volume, but the title says it all.  When initialized it tries to make your head explode.

  • Persisting data using LDAP

    Is it possible to persist data (across sessions) in an LDAP service? I would like to be able to store preferences/configuration properties in an LDAP service and when I restart the application server those properties are persisted and can be retrieve