Bridge cs6 stops working in win 7
Bridge freezes and only way to make it work is to reboot the computer. and then it freezes again.
I use win 7
Any solutions?
Try checking for permissions on these folders one by one: C:\Users\Current_User\AppData\Roaming\Adobe\Adobe Illustrator CSx Settings
AppData
Roaming
Adobe
Adobe Illustrator CSx Settings
Permissions on above folders should be R & W.
If these settings are fine then check for permissions on these folders at location: C:\Program Files\Adobe\Adobe Illustrator CSx\Presets\
Adobe Illustrator CSx
Presets
Permissions on above folders should atleast be 'Read' or 'Read & Write' both.
This might help. Since, it works for you using different user account then it is definitely a user permissions issue.
Similar Messages
-
Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What
Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
It
Win 7 x64 Pro
CS6
ThanksGood luck with that, and don't forget to deactivate CS6.
My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten! What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers. They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays. I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
The Premiere Pro hardware forum is the perfect place to ask about stuff like that. Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing.
So I wish you good luck again, and I know you'll make a plan before going ahead with it. -
Bridge CS6 stops working keywords are updating???
Everytime I try to update the keywords I always get an error and then Bridge shuts down! Very frustrating! Any suggestions?
Curt - thanks for your time and suggestions!
The reset was unsuccesful for either BRidge or Bridge (64). IT still did the same thing - closed the program down!
Here is the event log...
Faulting application name: Bridge.exe, version: 5.0.1.23, time stamp: 0x505aadb6
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x2524
Faulting application start time: 0x01cdc9d92f4bf692
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 8522233f-35cc-11e2-bcbc-3c970e1837f0
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-11-24T00:18:50.000000000Z
EventRecordID
15708
Channel
Application
Computer
Deleted for security
Security
EventData
Bridge.exe
5.0.1.23
505aadb6
ntdll.dll
6.1.7601.17725
4ec49b8f
c0000374
000ce6c3
2524
01cdc9d92f4bf692
C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
C:\Windows\SysWOW64\ntdll.dll
8522233f-35cc-11e2-bcbc-3c970e1837f0 -
Adobe Bridge CS6 Stopped working. Fault Module Name: StackHash_0a9e
It's just typical. I'm up against a deadline and this happens.
If I try to open an image in Camera Raw, check the colour settings, get into the camera raw preferences this is the result:
Problem signature:
Problem Event Name: BEX
Application Name: Bridge.exe
Application Version: 5.0.2.4
Application Timestamp: 50d99f7a
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0018f890
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
Adobe bridge has stopped working windows 8
I recently installed adobe bridge cs6 on a windows 8 computer and when the program launches and i browse to a folder with images I see "adobe bridge has stopped working" and the program crashes. Any Idea what I can do to solve this?
I am having this same problem, but I am using windows 8.1 (64 bit) - Toshiba Click 2 pro, 1920 x 1080 resolution.
I just installed Design Standard CS6, everything said these would be compatible,
http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.html
https://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaul tFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=adobe%2Bdesign%2B standard%2Bcs6&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance& Compatibility=Unknown&LastRequested=14
but I"m having problems with Bridge CS6, Acrobat X, Photoshop CS6 64-bit and Illustrator 64-bit.
What to do?! -
"Adobe Bridge has stopped working"
Just installed CS2 Version 9.0. Having "Adobe Bridge has stopped working" Windows 7 Pro 64. Is there a solution to this problem?
Thanks?Curt,
Thanks for getting back to me.
Bridge had worked before. When I refer to BRIDGE I mean that I go to a
folder of photos in PS and select file/browse to open. This feature
does work with other folders of photos. It was when I downloaded photos
from my cell phone into a folder and in PS went to file/browse the
browser will open and then I get a message "Adobe Bridge has stopped
working."
I can still go to another photo folder in PS and select file/browse and
it will work, the problem is with the photos from my cell photo.
Do you have any ideas.
I have the latest versions of PS.
Thanks,
Jack -
**Bridge Has stopped working
I'm having a problem with my Bridge. As soon as I attempt to open I recieve an Error message "Adobe Bridge has stopped working" (it won't even open). I'm running Vista and I've never had this problem. I recently added a printer drive for Epson r-1800. Has anyone had this problem before.
you should probably check in the bridge forum...
http://www.adobeforums.com/cgi-bin/webx?14@@.3bb8a3bf -
Bridge suddenly stopped working
Hello everybody,
My Adobe Bridge just stopped working without any reason.
An hour ago i used it without any problems, now when i start it, the program freezes instantly and the only thing i can do is close it.
I read the sticky topic on it, and i tried installing the newest graphic driver and removing 3rd party plugins. I couldn't find the preferences so i could not reset them.
Does anybody have any idea how i can make my bridge work again ? Because this is REALLY annoying.
Thanks in advance !
Kindest regards,
mambo88Yes i am, my pc settings are pretty much the same as when Bridge worked.
It was really weird; i was just using PS and Bridge untill i was finished. Then i closed both, but after a while i remembered i had to do some additional photoshopping so i opened both programs again. Ever since then bridge wouldn't start anymore. -
Why do the "SAVE", "SAVE AS" and "UNDO" functions of InDesign CS6 stop working after a short time?
Normally they don't. You might have some sort of problem on your system, possibly a conflict with other software, or corrupt ID prefs or application. Trashing the prefs is easy, and good place to start: Replace Your Preferences
It will help if you tell us the OS version, whther you've installed the 8.0.1 patch, and how you are trying to access the commands, and what happens when you do. Is this isolated to one file, or does it happen with all files? -
[Solved]Vbox 3.1.2 - Bridged networking stopped working on Arch guest
After upgrading Virtual Box to 3.1.2 (both ose and puel versions apply here) bridged networking stopped working on an Arch guest which I use as a test server.
While writing this post I solved the problem. What I did was to enable NAT on the first adapter and Bridging on the second. After booting into to the guest I did the following;
# ifconfig eth1 up
# dhcpcd eth1
I shutdown the guest and removed the NAT adapter so only the bridged one remained, booted it and voilá for some mysterious and unfathomable reason bridging now works again.After upgrading Virtual Box to 3.1.2 (both ose and puel versions apply here) bridged networking stopped working on an Arch guest which I use as a test server.
While writing this post I solved the problem. What I did was to enable NAT on the first adapter and Bridging on the second. After booting into to the guest I did the following;
# ifconfig eth1 up
# dhcpcd eth1
I shutdown the guest and removed the NAT adapter so only the bridged one remained, booted it and voilá for some mysterious and unfathomable reason bridging now works again. -
Adobe Encoder CS6 stopped working, not start.
Hello,
I have a PC with the following characteristics:
Motherboard: Intel DX58SO
CPU: Intel i7 2.97GHz
RAM: 8 Gb
Hard Disks: 2 in RAID (7200RPM)
The problem is:
Adobe Encoder CS6 stopped working, not start, what can I do?
No works wanting to export from Premiere CS6 or opening it alone.
ThanksGood luck with that, and don't forget to deactivate CS6.
My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten! What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers. They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays. I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
The Premiere Pro hardware forum is the perfect place to ask about stuff like that. Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing.
So I wish you good luck again, and I know you'll make a plan before going ahead with it. -
Can anyone help?. i am new to photoshop elements 10. i get this box come up on screen when i start elements "Adobe media core cs6 stopped working" . It appears elements still works but if i use smart fix for auto levels or colour the photo goes white....this never used to happen.
The editor saved prefs often get corrupted. This is because PSE saves your settings each time you close the application. Problems can sometimes occur if you don’t let the program close properly or if you launch another application too quickly whilst closing down Elements. You may need to rebuild the editor preferences to resolve any conflicts. To begin, close Elements.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. After a few seconds release the three keys and look behind the welcome screen by closing it. Alternatively hold down the three keys whilst clicking on the desktop icon for the Editor or PhotoshopElementsEditor.exe in the Programs folder. Keep holding down all three keys for a few seconds; then release. You should get the settings option.
When you see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Then wait whilst Elements rebuilds the preferences.
If that doesn’t make any difference go to the Apple website and check for updates to your Quicktime player.
Also check your internet security/anti-virus software is not blocking. For example the internet filter NetNanny is known for sometimes blocking the .exe file 'Adobe QT32 Server.exe'. It may be possible to add that file to an exceptions list to prevent blocking. -
Illustrator cs6 stopped working
I have got a subscipriton to creative cloud. I have a laptop and a desktop. both were working fine until a few weeks ago when the desktop version of illustrator CS6 stopped working. all other apps are fine. totally wierd. have unistalled and reinstalled, and also repaired permissions just in case but it still wont work.
basically it boots up OK and then when you go to drop down menus its all greyed out so unusable. even quit is greyed out so i have to force quit to close it.
any ideas?? very irritating and im desparate to get this working asap as got a backlog of work to do.
SteveSteve,
Did you use the Cleaner tool between uninstalling and reinstalling?
http://www.adobe.com/support/contact/cscleanertool.html
This should be one for Customer Service, if your nerves can handle it. -
Why does my adobe audition cs6 stop working when i try and make an edit in windows 7?
why does my adobe audition cs6 stop working when i try and make an edit in windows 7?
You might get more help asking in Audition CS5.5, CS6 & CC
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
Folio Builder-Indesign CS6 stopped working
Hey to everybody!! Every time that i want to open Folio Builder it keeps appearing the same thing. Adobe Indesign CS6 stopped working. I don't know why. I tried to reinstall digital publishing suite in case if some of the archives were damaged but i can't find a solution to my problem. Any suggestions?
The rest of the applications of digital publishing suite work just fine.
Thanks,OrestisThanks for replying! But I already found my solution! After a few weeks of frustration and putting this message online I found out that it was the default printer that caused the error. Normally I use a printer from my university network as my default printer, but this caused the error since the computer is not always connected to that network. Now I put the Microsoft XPS Document Writer as default and everything works fine.
I run the Adobe Creative Suite CS6 on Windows 7, my error log showed the following:
Faulting application name: InDesign.exe, version: 8.0.0.370, time stamp: 0x4f72c3ee
Faulting module name: AGM.dll, version: 4.26.18.19553, time stamp: 0x4f3a0265
Exception code: 0xc0000005
Fault offset: 0x0024d0cd
Faulting process id: 0x1508
Faulting application start time: 0x01ce4905ac3f0ca2
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\AGM.dll
Report Id: 211d7fdd-b4f9-11e2-bd34-e02a822ba99d
Maybe you are looking for
-
Officejet Pro L7580 appears as a network drive in Win7
I have a new Dell desktop with 64-bit Win7. I have installed the printer with HP's latest 64-bit full software program downloaded from HP's website. My L7580 all-in-one loads on my network as a disk drive. When I click on the link it reports: "LOC
-
Connecting wirelessly to a office copier/ printer
I am trying to connect wirelessly to the multifunction copier/ printer at work. I would like to be able to send files to my mailbox that is stored on the printer side of the machine. I am connected to my job's staff wireless internet. However, I have
-
my new 6th generation synced fine the first time I added my cd's to itunes. Thereafter, I added additional cd's which are on itunes but the message I receive is syncing is complete but they do not appear on my ipod. Only the original cd's are still
-
Any change to my Photoshop Preferences refuses to be saved.
I just got a new Macbook Pro, with Mavericks installed, and my Photoshop CS5 is experiencing issues. Changes to Preferences cannot be saved due to the file being locked or a permissions error. But when I go into the 'Get Info' panel in Finder: It say
-
HT2496 How to add language?
How to add language to mac dictionary? I wanna search... Korean-English English-Korean Chinese-Korean Koran-Chinese Japanese-Korean Korean-Japanese Greak-Korean Korean-Greak ETC. Please, Help me. I useing 2009, Macbook Pro 13'