Bridge CS6 tries to use Photoshop CS4 that has been uninstalled.

I upgraded from CS4 to CS5.5 and then to CS6. I then uninstalled the CS versions 4 and 5.5.  But my CS6 version of Bridge still tries to run the CS4 version of Photoshop.exe. How can I get it to use the CS6 version of Photoshop.exe instead?

Ditto, same problem I have, so we both need some help.
This happened either after upgrading to Yosemite, or downloading the last update of CS6 from Adobe.
I can open a picture in CS6 by right clicking and then going to open with CS6, but it takes an extra step.

Similar Messages

  • How do I open a pdf book cover file using Acrobat XI into Indesign CC?  Everytime I try, it says I am trying to open a file that has been saved wrong.

    How do I open a pdf book cover file using Acrobat XI into Indesign CC?  Everytime I try, it says I am trying to open a file that has been saved wrong.

    PDF files cannot be natively opened in InDesign. They can only be placed as graphics.

  • How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

    How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

    MB-
    As far as I can tell, Error Code 36 is an "I/O Error".  It may mean you have a bad USB cable between the iPad and your computer, or the cable was not plugged in firmly.
    See if this helps with your Restore:  <iOS:  Unable to Update or Restore>.
    Fred

  • Bridge keeps trying to open photoshop cs4 and not cc2014

    I uninstalled my old Photoshop CS4 after CC 2014 was installed and bridge keeps looking for it. I cannot find the setting in ACR or Bridge to tell it where the CC 2014 executable is, instead. Am on a Windows 7 PC.

    It could also be your file associations in bridge cc are set to photoshop cs2.
    In Bridge CC
    Edit>Preferences>File Type Associations

  • Can you use an iPhone that has been locked in iCloud

    how can i unlock an iPhone that has ben locked in iCloud

    You won't be able to remove the existing iCloud account, restore or erase it without know the password.  If you ever update it or restore it you will not be able to activate it again and use it without knowing the correct ID and password.

  • Trying to use migration assistant , it has been at one minute to go for the las 5 hours what do I do

    I am using migration assistant and it is at one minute remaining for the last 5 hours, what do I do?

    Hello troubledupdate,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Have a nice day,
    Mario

  • HT1414 How can I use my info that has been backed up on my older iphone

    I was wondering how can I access the information that was backed up on my Iphone 3G and 3GS, now that I have the current Iphone 4S?
    Can I print that information out on a word doctument or something?

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • HT1212 tried to restore my ipod that has been disabled and I can not get it to go into DFU mode I have tried a million times and it will not allow me to. I have done this before to restore other devices am I am not new to this process. please HELP?

    Can not enter DFU mode and I am stuck with a disabled ipod can anyone help.

    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC
      The Firmware Umbrella - TinyUmbrella

  • Error code 1003 when trying to watch a movie that has been purchased?

    I just purchased a movie from iTunes but when I try to play or download the movie I get an error stating "Unable to check for available downloads. An unknown error occurred (1003)."  Any suggestions?

    MB-
    As far as I can tell, Error Code 36 is an "I/O Error".  It may mean you have a bad USB cable between the iPad and your computer, or the cable was not plugged in firmly.
    See if this helps with your Restore:  <iOS:  Unable to Update or Restore>.
    Fred

  • App Store keeps showing update for program that has been uninstalled

    The App Store keeps showing an update available for Virus Barrier Express even after I have removed it completely from my system.  Going into the Purchased list shows it is not installed.  When the application was installed it always said there was an update.  No matter how many times you clicked Update and allowed it to download and install the update, the App Store still showed the update needed to be installed.
    On another machine it constantly shows an update for one of the installed applications but clicking the update button doesn't clear the update once it's been downloaded and installed.
    Deleting the App Store preference hasn't resolved the issue.  Enabling the debug menu and using the Reset Applications option has not either.

    I found out what was causing my problem (can't re-install an app that I deleted and which was purchased from the App Store). The app I was trying to re-install under Lion was Apple's Compressor v4 which is only available through the Mac App Store. However, even though I was booting from my one-and-only copy of Lion the Mac App Store was apparently getting confused by an old copy of Compressor v3.5 that was installed on another boot disk that I maintain for Snow Leopard. I'm running on a quad-disk Mac Pro so all four disks mount whenever I start the system. In any case, all I had to do was unmount the other disks and the Mac App Store then allowed me to install Compressor v4 on my Lion system.
    The reason I was able to pinpoint this solution is that I wanted to run another Mac App Store app (Find Any File) and even though the Store said it was "Installed" I couldn't find the application in either the Lion Application folder or within LaunchPad. I then realized that the App Store was referencing the copy of that app that was stored on my Snow Leopard disk and unmounting that disk finally allowed me to install both Compressor v4 and Find Any File on my actual/current boot disk (i.e. Lion).
    Now, the odd thing about this problem is that Compressor v4 wasn't installed on any of my disks, it was the older version of Compressor (v3.5.3) that apparently was preventing me from installing the new version 4 on my Lion system. In fact, Compressor v3.5.3 crashes immediately under Lion so that version of the app isn't even usable when I'm running Lion.
    So, if you're having a problem with installation or app removal or updates from the Mac App Store try dismounting any other disks which you might have attached to your Mac and see it that solves your problem. If it does solve the problem then you can almost be assured that the cause of your difficulty is some file that is present on one of your other disks (i.e. app may not even be on your current boot disk).

  • I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to loadp

    I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to load a 30 day trial of PS14i After I enter  the password I am never allowed to go any further, What do I need to do to get into my catalog?

    I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

    I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

    Please refer:
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac- os.html
    Regards,
    Ashutosh

  • Receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    There isn't much here which is actionable.  Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • How do I de register Photoshop from 2 computers that I no longer use?  Both computers hard drives have died and I need to use Photoshop CS4 on another machine

    How do I de register Photoshop from 2 computers that I no longer use?  Both computers hard drives have died and I need to use Photoshop CS4 on another machine

    You will need to contact Activation Support:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html
    Click the Chat Now button at the end of the page and talk with a live agent who would resolve it ASAP.
    Regards,
    Ashutosh

  • I'm trying to reinstall Photoshop CS4

    I'm trying to reinstall Photoshop CS4 after I had a computer repair. I have my key and I downloaded the 2 files on the adobe dl page for CS4, There's a _LS1 file of 1,200 KB and a larger _LS2.7z file of 796M.  But when I double-click on the LS1 files, which says it's an application, I get an error message that says I need the 'other file', to download the 'other file' and make sure it's in the same directory. But I do have both LS1 and LS2.7z files in the same directory. Any suggestions?  Do I need something to extract the files?
    Thanks in advance!
    Jane

    they're not matching files.  ie, you have the archive for a different (like the japanese) ps cs4.
    retry.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for

  • How do I do a factory reset on my IdeaTab Lynx K3011?

    I'm selling my IdeaTab Lynx K3011. I want to do a factory reset on it so the buyer can set it up as his or her own, and so  my data/logins/passwords are gone from it.  How do I go about doing that? Thanks,Chris

  • Anyone in Japan using DION?

    I'm having the "Do you want to stay connected?" icon flash up every fifteen minutes. I posted about this last night, but in the meantime I've come to learn that it's the DION server driver that's causing this, and Apple can't help me. I'm going to tr

  • Manage multiple Time Machines

    I have about 10 users with Macs. Is there any application/tool I can use to manage all of their Time Machines in one place? I'd love to be able to see success/failure of their backups.

  • Datepart equivalent in oracle for date function

    I was trying to convert the sqlserver query to oracle and found a function which is not available in ora, could you plz help me in converting this select top 5 ssm.maturity,datepart(mm, dateadd(mm, -3, ssm.maturity)) from sec_ind_ss ssm; 2014-10-23 0

  • DB Connect Error - There is no table in database system

    I am trying to get DB Connect to work in our BI 7.0 system.  I believe I have the DB Connect source system setup correctly.  In BI, I execute the following steps: 1. Right-click on the DB Source system and select Additional Functions > Select Databas