Bridge CS6: Video thumbs do not show start of clip

In Bridge CS5, the generated video thumbnails reflected the start of the clip (I don't know if it was the first frame or not, but close enough). In CS6, the thumbnails seem to be more towards the middle of the clip, and I find this very annoying.
I tried purging the cache for one of them, just in case, but that did nothing.
As an additonal point of info, the preview window also shows incorrectly (it shows the same frame as the thumb) until you scrub or play.
Is there anything I can do to change this behavior or is it a bug?
Ken

Apparently not, and this is probalby not even a Bridge sub-routine but is dictated by the codec as indicated in the LINK for Win7 "frame for thumbnail".  They even have a website to lobby for this feature.

Similar Messages

  • Built Flash Video and will NOT show in Hosted Environment

    Built Flash Video and will NOT show in Hosted Environment.
    The files generated work on development machine. I posted the same
    files in hosted environment and flash will not show. I first
    thought it was Vista 64 IE 7 so I switched to XP IE7 and same
    results. Still it is strange the falsh works locally. I am sure it
    is something simple that I am missing. Any help would be
    appreciated. Thank you.
    Stan

    Nickels55, I appreciate the response. Here are the
    interesting facts. I had my hosting provider apply the mime type
    and restart IIS. No flash video. I have Vista x64 Ultimate with I
    think IIS 7 (the default IIS that comes with the OS.) The flash
    video would not show in that environment until I applied the MIME
    and then it WORKED. Yeah! But I still don’t have it working
    on my web hosting provider with server Win2003. I thought it was
    the hosting provider but I posted on my work server Win 2003 and
    changed the MIME with a reset and could not get the video to work
    there either.
    I would like to try another angle here. Again I am using the
    wizard to encode and publish the flash video. Maybe I don’t
    have a settings correct. I can approach this a few ways.
    1.) I can send my video to someone to post on their Win2003
    server and see if they can get it going.
    2.) Someone send me a short 3 second video that they produced
    that they know it works on Win2003.
    3.) Any other ideas? Surely someone in this universe has used
    the flash wizard to encode a video and published to a Win2003
    server. :)
    I guess the other thing to note is when creating the flash
    video I chose no controls (play, stop, pause). I want the video to
    start when someone accesses the page for the first time.
    Thank you for the help everyone.
    Stan

  • Firefox 21 does not show start menu and taskbar sub-links of new tab,private window

    Firefox does not show start menu icon 's submenu containing links to new tab,new window and new private window.Same happens with taskbar pinned shortcut. It does not show the above three options when I right click on it. I have installed Firefox stable,beta,aurora and nightly at the same time.All the four use different profiles.I have this setup since Firefox 12.There was no problem before v21.I tried reinstalling all the four.Resetting the stable version profile.The options do appear in othe ruser accounts.I want this option for stable version only.I think these are not available for testing versions.I tried all the suggestions in this thread:
    https://support.mozilla.org/en-US/questions/943198
    I am on Windows 7 64 bit.

    You may be experiencing this Windows 7 bug:
    * [https://bugzilla.mozilla.org/show_bug.cgi?id=870529 bug 870529] - Windows jumplist not showing anymore
    <i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

  • Just bought an .OTF font for Flash CS6 and it's not showing up in the list.

    Just bought an .OTF font for Flash CS6 and it's not showing up in the list.
    EscrowText-Roman.otf
    Any reason why? It shows up in Illustrator and Photoshop just fine.
    Line

    If you have never synced an audiobook yet, you have to connect your ipad and go to the books tab.
    Scroll down past the regular books and there will be where you sync your audiobooks.
    Then they will show up on the music app under "other"

  • Video app does not show movies or tv programs. What can I do?

    The Video app does not show the movies and tv programs stored in the Ipad. They are still there. In fact, I can play them back in my computer when the Ipad is connected. I have closed the app, turned off/on the Ipad to no avail. What can I do?

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Videos and pics not showing up in the apps

    any pics or videos i take using my playbook or any i upload do not show up in the built-in video and picture viewing apps that come with the playbook? older pics/vids do show up though. help please?
    Solved!
    Go to Solution.

    Are you putting the in the correct folder?
    I noticed my videos in the picure folder wont show.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Adobe Bridge CS6 "The operation could not be completed"

    I cannot get Bridge CS6 to run under my Mac account.  All other accounts on my MacBook Pro work fine with Bridge.  I have re-installed CS6 several times and I have searched the internet for days to find a solution. I can see that this is a common problem but there is no workable solution, and Adobe still refuses to admit there is a problem and to offer a fix.

    Only my account won't run this product all other accounts on the same machine seem to work okay.
    Then the problem lies in your account. A fresh install would not help unless you also used the Adobe Clean tool to remove all other settings. But that is a bit harsh to try because then all other Suite info is also deleted and you have to reinstall the lot.
    And when the app runs in other account it means the install on root level (where your default application folder is and where all other account also make use of) is correct.
    The easiest thing would be to create a new account but I don't know if that is an option for you regarding other settings and stuff in this account.
    First run Apple Disk utility on your problem account to check and repair disk permissions.
    Then open your user library (by default hidden, use menu Go and press option to reveal this library)
    Go to the folder called preferences and inhere is Bridge5 plist file, delete this to the trash.
    In same user library go the folder called Caches and follow this path / Adobe/ Bridge CS6  and inhere delete both the folder called Cache and the plug in. All deleted files will refresh them selves after you managed to restart Bridge.
    Then again use the option Curt provided, hold down option key while restarting Bridge and from the options choose preferences.
    Then try again.
    The other option would be to use the MacOs recovery disk on this user account to create a new user library while archiving the older one.
    Disk drive 750Gb with 40Gb spare.
    Usually at least 10 % free space is recommended for running smoothly. Bridge is very processor demanding and if you have other applications running 40 GB is simply to low to run your system and apps smoothly.
    Also be aware that if you have multiple user accounts installed and on all accounts you use Bridge you should find a new location for the cache file. By default Cache is stored in the User library (see above). And depending on amount and size of files and preview settings (100% preview creates huge files) this cache folder can grow to very large proportions.
    If you have different user accounts and all create their own library you need to recache every time you visit in the new account.
    I have no personal experience with multiple accounts on my machine so don't know if Bridge can handle multiple accounts on one machine with one cache folder on root level.
    Network usage is not supported and often difficult but having one machine with one root file for cache might work without problems.

  • Bridge cs3 and content panel not showing all images

    I am using Bridge CS3
    If I scale my panel images down very small all are visible. If I enlarge the images beyond the visible area, a scroll bar appears. However if I move the scroll bar to the end, it does not show the last two images. I cant get to them
    Any suggestions on what is happening
    Jack

    Jacj,
    Did you ever find a solution to this problem. I am faced with same problem as detailed by you and here:
    http://forums.dpreview.com/forums/read.asp?forum=1004&message=27027323
    I do not see a great solution in the posts at attached link, other than perhaps resetting workspace.
    Thank you,
    J

  • Bridge CS6: Output to PDF not working/Blank

    Using Mac Mini: Lion OS.
    Adobe CS6 Photoshop / Bridge
    This Output worked in the past. Sometime in the last month it has stopped working.
    I select three images for examples and want to create a simple pdf (content sheet)
    Nothing fancy, no watermark.
    I have reset the preference settings at bridge startup with the (hold alt key) still doesn't work.
    Any help would be great.
    Thank You
    Greg

    OSX 10.8.2
    Bridge : CS6 (version 5.0.1.21)
    No software updates have been installed. The Output would give me option to PDF or Web.
    Nothing is happening now. The RIGHT hand window pane is completely empty.
    I select my three images, click on Output and nothing happens. (Just three selected images and and empty pane on the right hand side.)
    As of a month ago, this worked. I selected three images and Output, a whole window would show up with options to adjust the layout of my pdf sheet.
    I could fill in the header and footer, select columns and rows, resolution. Everything. Now nothing shows up.
    I can't describe it anymore than that.
    Thanks for any help
    Greg

  • When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

    Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

    I resolved the problem. It was somehow related to my using Microsoft
    theme pictures. I set Windows to use the basic theme and the problem
    went away. Thank you for the suggestions.
    Jac

  • Photo/Edit-In CS6. psd image does not show in LR after save/close.

    Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

    This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
    If the behavior you describe follows a <save> in CS6 it is not normal.
    This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
    BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • Video / Audio Filters not showing up in "Viewer" tab?

    Hi, I recently re-installed Final Cut Express v4.0.1 after a hard drive crash.  Now the video and audio filters do not show up on the Viewer Screen.  They show up on the "Effects" menu tab (though video transitions do not).  I've attempted uninstall / reinstall and deleting preferences but still no luck.  Any suggestions?  Thanks!

    You may not have deleted the dodgy app fully as there are numerous hidden folders.
    Use this free app:-
    http://www.digitalrebellion.com/fcsremover/
    Make sure only FCE is selected and click the Remove Selected button at the bottom.

  • Rented Video on ATV not showing up in iTunes

    I have rented videos on my ATV with no problem and transferred them to iTunes. Now, today, a rented video on my ATV is not showing up in iTunes. Is there a setting that could have been changed?
    Any ideas?
    Jonathan

    Jonathan Levit wrote:
    I just spoke with Apple Tech. Apparently, you can not transfer a movie that was purchased on the appletv over to the computer. This seems odd to me, but that is the information I have just received.
    i think you've been given wrong information then.
    afaik, as long as the movie is not HD, you can sync them back to itunes (just the same as purchasing tv shows - and i know this works as i do it).

  • Video in project not showing

    i have a completed project that shut down while sharing due to the battery running down. Since then he video will not show in the window. it is in the project window and I can hear the audio but not video. Any ideas what is going on? Did i hit a button or is it buggy because of the interruption during the export?

    when you publish a project, other files that you did place manual in the folder ( like video files), don't get inside the published files, you have to copy the video from the source files to the published files

  • 5dmk3 video capture info not showing in LR4?

    Used to have a canon 7d, which created a .thm file that held all the capture data info for the video, but now with the 5dmk3 it seems like the thm file is embedded into the video file, but now in lightroom the capture data does not show up any longer:( very useful for me to see atleast what ISO the video file was shot with.
    Any help suggested?
    I have tried downloading directly from memory card into lightroom, an also via a card reader, and also via the EOS utility (like canon recommended) but it makes no difference.
    Jo

    Presenter Video Express (APVE) does not use the theme for the PPT output. If you embed the MP4 in a PPT slide using Presenter, then publish it out it will have the theme wrapper around the PPT content, which contains your APVE video.
    If you want to customize the theme in the APVE you can do that when editing your video in that tool.

Maybe you are looking for