Bridge does not launch any PS-Script after upgrade to 1.0.2

Hi,
there are some communication problems between Bridge and Photoshop CS2 after upgrading Bridge to 1.0.2:
1) If i choose e.g. the imageprocessor or any other PS-Script via the Bridge menu then PS will be launched, but the sript won´t be started in PS. That means that PS is activated by the command but that´s all...
If i launch the script via PS there is no Problem.
2) If i activate "Double Click edits Camera Raw Settings in Bridge" in the Bridge Preferences the image will launch Camera Raw but after that it will not open the image in PS. If i deactivate this then Camera Raw starts PS and it opens the image without any Problem.
Before the upgrade to 1.0.2 it worked perfectly. Deinstalling and reinstalling the old Version does not help.
Even reinstalling PS and all the components does not work at all... (
System is Windows XP
Preferences of Bridge and PSCS2 are resetted.
This is a cross posting. I added this topic yesterday in the "Bridge Forum" but nobody there seems to have such a problem, so i started this thread here again...
It´s really a big problem.
Thank you in advance!!
theo

I'm not sure - I'm trying to script Bridge to hand off a file to PShop and run a script using the cross-DOM method. It opens the files, but I can't get it to run the script.
Still working on it - will try messaging method next, I guess.
The samples aren't there, so I'm running blind, a bit.
rickb

Similar Messages

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
That sounds like the probable cause you cannot add contacts.
Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps). Also contacts sync has nothing to do with iCloud behavior. The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere. Specific syncs are not relevant.

"Big Bridge" does not launch with Mini Bridge

When I open Photoshop and launch Mini-Bridge, it does not launch "big bridge." The littel wheel turns around and a note says "waiting for Bridge CS5," but Bridge CS5 never opens. The little wheel keeps turning around and keeps waiting and waiting. I have gone into settings and tried both settings. 1. Open Bridge automatically when Mini-Bridge starts. 2. Do not start Bridge until browse files is checked. On either setting, Bridge still will not launch. Does this call for a re-install of Photoshop? Need advice. Thanks

I have not kept up on this issue. There was quite a discussion on the topic in the Photoshop Forum when CS5 came out, but issues must have been resloved as have not see anythiing on it for awhile.
Make sure you have the latest Bridge and PS updates. The use the search fuction (many times google is faster) and read some of the replies.

Desktop Icon does not launch program on Mac after download

Purchased from Adobe via internet. Akamai interface downloaded and then Photoshop Elements 11. Both icons on Mac desktop. Double clicking on PE 11 does not launch program. Is it fully downloaded? I get Read Me file in four languages as well as a PE 11 icon after double clicking the desktop icon.
Thanks

Thank you. The download directions did not include the part about double clicking the desktop Elements icon, double clicking the elements icon within the box that opened and then clicking on "install." Okay, so i am not computer savvy, but the directions gave the impression that the download was complete after following the supplied instructions. Who knew? I did not want to duplicate a download, so was apprehensive to take this action. Did it anyway out of frustration and it worked. Obviously, the application was not entirely downloaded. Now, i get to learn a whole new application as IPhoto bites! I spent hours and hours, days upon days scanning and editing old family photos in IPhoto only to learn that the program re-sorted my photo order when i tried to make copies for family. I lost my edits, lost my photo notes and had to retrieve my entire library before presenting several hundred multi generational family photos to everyone in my extended family! Hopefully, this application will be an improvement!
Thanks again for taking the time to respond!

Bridge does not mark thumbnails with icon after file has been worked.

I use Windows Vista and process photo files in Bridge using the latest Camera Raw plug-in and Photoshop CS2. Bridge does not mark each thumbnail with a icon as it should after processing. I use the same PS program on another computer using Windows XP and Bridge does mark each thumbnail with an icon. Why will Bridge not mark each thumbnail with an icon as stated in the PS manual on my Vista computer?

I use Vista and CS3, Bridge marks my RAW files when changes are made. Check to see if you have different settings in Bridge between the 2 computers. PS is not supported by Vista Basic.

Firefox does not load any websites now, after working well earlier today.

Firefox is not working now - it does not load any websites. Message on screen says:- "8e6 Mobile Client - internet browsing is not possible at this time. Error:80001001".
What I was doing before the problem:-
I had spent time re-organising My Documents.
One folder in My Docuamnts called "High Windows" contained the file "2101HighWin.msi", which I attempted to open.
What I have done since the Firefox problem:-
I have tried to uninstall 8e6 Mobile Client, but it won't let me.
I have uninstalled and re-installed Firefox.
I have used InternetExplorer8 to search thru the Mozilla troubleshooting pages.
Please can you help?
Cheers,
Bruce

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
Make sure that you regularly check if there are updates available for your plugins.<br />
See http://www.mozilla.com/plugincheck/
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.1 r53
# Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

TS2756 iOS personal hotspot does not let any device connect after a connection from a 5 GHz band

I used my iPhone 5 with latest iOS version. When I connect my iphone to a 5GHz band at home and then ON the Personal Hotspot (PH), my ipad mini retina can't connect to the wifi of the iphone, it said "Unable to connect". I tried it with my laptop and got the same result. But if I disconnect it from the 5GHz and reconnect to a 2.4GHz band (at home too), then turn on PH, it will let other device connect normally.
I know that I can solve the problem by connect to a 2.4GHz and then turn on PH. But the problem is when I go out, every wifi around me is password protected, and I need to share PH to my laptop. it just won't connect. Do a Network reset solve the problem too, but when I come back home and connect to my 5GHz band, the problem still raise, PH will not let any device connect to it until I connect my iphone to a 2.4GHz and then turn on PH again.

Hi, thanks for your answers.
I have tried bluetooth tethering and it does work, but often i find has the same issue after a few minutes or if i let my device sleep, i have to reinitiate the hotspot. Whats worse is that i can go into the hotspot settings sometimes and it says "NOW DISCOVERABLE!" but nothing can see it, not my iPad, not my laptop, nor any other wifi enabled device until i toggle Hotspot off and on again.
Also, distance is an issue. Occasionally I like leaving my iPhone to charge on my desk to charge as tethering beats the battery up and if i go to the room next door, the bluetooth drops. If i don't come back within range in a few seconds, the hotspot becomes undiscoverable and I have to go through the process again. Overall this has not been a feasible solution for my issues.
As for resetting the network settings, I had to do this initially when I upgraded to iOS 5 as the Personal hotspot setting disappeared entirely. I had to do a full network reset, and reboot my handset once more for Personal hotspot to even return as a usable option but it didn't help the flakiness. This isn't an iOS 5 new issue though, as i said, it's been happening since 4.3...
All these super annoying first world pains eh? Again, thanks for your feedback but it doesn't help my particular issues.

Safari on iPad does not display GIF image anymore after upgrade to iOS 4.3

1) Could anybody (especially those in Apple iOS or Safari teams) advise me why the Safari on my iPad cannot display some images (probably in GIF formats) on some webpages anymore, after I upgrade my iPad to iOS 4.3? These images on the webpages can be properly displayed on when my IPad runs with iOS 4.2.1. There should be no problem with these embedded image files because they can still be properly display in Safari running on my Macbook air.
2) Is there any solution to this problem?
3) Is it possible to downgrade my iPad back to iOS 4.2.1?

I am having the same issue with two different ipads (one Wifi and one Wifi-3g) running on our home network (Verizon FIOS). The website in question is www.tvwc.com and the main logo in the upper left corner, a .gif, does not display, only a "?". Other images on the site, in .jpg format, display correctly.
I was running 4.2.1 and am now just upgrading to 4.3.

My iPhone5 does not discover new bluetooth devices after upgrading to ios7.02

After I upgraded to ios7,02, my iphone5 connects only to one previous device only, my VW phone. It did not connect to my Logitec headset, nor other devices.
I tried forgetting both the devices, recycled power when iphone was in discovery mode.The iPhone5 still does not discover them.Is this a bug in 7.02 ?
Verified that all my devices are connecting fine with other phones.
Do any of you have the same problem ? Help !!!

Hey ravi1462,
Thanks for the question, and great troubleshooting so far! In regards to bluetooth connections, you may find the following troubleshooting information helpful:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
- Move your iOS device closer to the Bluetooth accessory.
- Remove any case, stand, or other accessories from your iOS device and see if performance improves.
- Check for sources of potential interference and move both the iOS device and the Bluetooth accessory away from other electronic devices.
- Check that the Bluetooth accessory is using a profile that works with the iOS device.
- Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
- Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Additional information:
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Thanks,
Matt M.

F4 HELP does not hit BADI exit code after upgrade BI 3.1 to 7.0

Hi folks
Context : Using a virtual characteristic, after upgrading from 3.1 to 7.0
Problem : the BADI user exit code is not run when using F4 help during navigation.
(The BADI works OK selecting data in the Provider, but not when navigating in the report.)
Any ideas ?
I have tried the SDN and Sapnotes & debug (nice ...) but no dice.
Thanks

Hi James,
BADI's must be reactivated after system upgrade, try to reactivate it and check again the query.
Regards,
Daniel

Icloud mail does not work over cellular network after upgrade to IOS 8.1.3

Hi,
Since I did the update to IOS 8.1.3 on my iPhone 6 Plus yesterday, my icloud mails cannot be received/sent with my phone over the cellular network.
In order to make mails workin' I need to be connected to a Wifi network.
All setting are correct on the phone.
How can I fix this **** issue.
Deleted the icloud account already and added it again but that does not help.
Also when I try to connect to iCloud from the iCloud settings it says: Authentication Failed - A server error occurred.
The password is correct.
Please help me.
Jerry

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Ipod touch does not appear in itunes 11 after upgrade

I upgraded my mac book pro to Mt. Lion and could still sync to my ipod. Then I upgraded my iphoto and itunes to the latest version. Now my ipod does not appear in itunes. I think I need to upgrade my ipod from 4.2.1 to io5, but cannot do that without being able to sync. What do I do. And do I really need io5 to resolve this problem?

Here's the general troubleshooting: iOS: Device not recognized in iTunes for Windows
Did you also try another USB cable or USB port?
Is your device plugged in directly, without using a USB hub?

Spotify does not play any sound even after re-installation

Hi,yesterday I got Windows 10 and today my Spotify updated. After that it seems to play a song, but no sound comes out of my speakers. I checked every volume bar and everything should be ok. The speakers also work as they should with any other program. I also re-installed Spotify (as it's recommended on the official Help site), but it's still crashed. Does anyone know what might have happened and how to fix it?

Seems that Connect service isnt working either..

My Apple TV does not see any wifi networks after 7 update.

i Have recently updated my Apple TV to 7 and ever since then I cannot see any wiif networks. I can connect through wired connection and works fine. I have tried Apple troubleshoo page and nothing works. Any ideas?

Hi, Cgomez8889.
Thank you for visiting Apple support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Cheers,
Jason H.

Bridge does not launch any PS-Script after upgrade to 1.0.2

Similar Messages

Maybe you are looking for