Bridge does not save adjustments in camera raw when I press done

bridge does not save adjustments in camera raw when I press done

baines0788,
Next time, please be precise when asked for details.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

CS4 Bridge does not open JPEGs in Camera Raw 5.6 which is grey

I downloaded Camera Raw 5.6 onto my iMac (Snow Leopard). I have an Olympus E-620. ORFs (raw) open in bridge, but the Camera Raw is greyed out in the file menu. Also, Camera Raw does not show up under "open with". My husband has iMac (same configuration) - his Camera Raw 5.6 shows up and he can open up JPEGs in RAW, which I cannot. I checked his settings against mine - seem to be the same. Suggestions???

Purge the cache for those folders and if that doesn't work, trash the Preferences for Bridge.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

CS5 Bridge does not recognise Nikon D 800 Raw Files

I have Photoshop CS5 Version 12.0 (x64). Photoshop recognises Nikon D 800 Raw files BUT
Bridge does not. I have tried updates but my Apple Mac Pro does not recognise them

That would mean that you have the ACR plug-in version 6.7 or 7.1 in the wrong place.
You can only have one version of ACR anywhere in your installation. If you have two, it won't work. Look for the version(s) you have installed in Photoshop under the Photoshop menu > About Plug-In:
Your camera has been supported ever since ACR 6.7 and CS5 can run ACR 7.1 (but not any higher version of ACR).
The only correct path for the plug-in in CS5 is as follows:
Very wide image: click on thumbnail for larger view.
NOTE that the path starts with the ROOT LEVEL Library, the one right after the name of your boot drive, not your user or Home Library.
The screen shot is from an installation under Snow Leopard, where I had CS5.

How to change preference setting in Photoshop CC 2014 to not automatically lauch Adobe Camera Raw when opening Nikon raw .NEF file

When I launch Photoshop CC 2014 and then open a .nef raw file it launches Adobe Camera Raw and I click Open Image, then I "Convert to Smart Object" then launch Filter > Camera Raw Filter. Is there a preference somewhere for raw files that just bring you right into Adobe Photoshop without stopping at Camera Raw first? Thanks!

Gene,
Ah! Okay, makes sense now. I just learned tonight that some features are not available when using Camera Raw as a Smart Filter. One being Lens Profile Correction. So it makes sense to have have Camera Raw open right off the bat to make some tweaks first then continue on. I found the below on the Adobe website. Thank you so much!!
Note: The following features are not available when using Camera Raw as a Smart Filter (that are normally available in Camera Raw), primarily because they don’t make sense in the filter context: Workflow options and preferences, crop and straighten tools, rotation tools (rotate left/right buttons), snapshots, camera and lens profile corrections.

Recovered files open in Bridge but not in PS4 or Camera Raw

My Canon T1i failed with dozens of images on the SD card. I used DiskInternals Partition Recovery to recover the files from the SD card. Many of the CR2 images show up fine in Bridge CS4, both the Content thumbnail and the Preview screen. (Screen shot 1) However, when I try to open them in either Camera Raw or PS4, most of images either do not open or only some sections of the image appear. For example, if you divided the image into 9 equal rectangular segments - 1, 2 or 3 may be visible, but the other are blank. (Screen shot 2)
Does anyone have an idea of how to recover the files?

MizzouTiger71 wrote:
These are Canon Raw files (.CR2) - I do not think I have any other software that will open them other than Camera Raw and PS4.
How about the Cannon software that came with camera? Or one you can download from Cannon.

Premiere CC does not let me show Camera Raw after imported blackmagic Cinema Camera DNG file

as the title said, I have imported my DNG files that shot from blackmagic cinema camera into Premiere CC 7.2 and the Camera Raw software does not pop up to let me do the color correction !! but in AE works well
please help me !! how to solve this problem (and the workflow if possible)

thanks u for the quick reply.. but can I ask u another question !!!
Can u give me some workflow about how to color correction my Raw video to deal in premiere ? I meant, do i have to Import my raw video to AE and then do the color correction and then export or blah blah blah.. please, i have no idea how to deal with it.. cuz i need to work premiere

Firefox does not save my tabs or sessions when I shut down my computer

To be more clear:
Yes, I have set my options to "show windows and tabs from last time".
No, I did not check "clear memory on shut down" or "start private session"
Also, it saves my tabs when I restart the browser, but when I shut down my computer and start up again, Firefox does not show my tabs from last time. The same thing happens with sites I've logged onto before; it logs me out after I shut down my computer.

Did you check the "Clear Recent History" settings to be sure cthat you do not clear the Browser history and the cookies?
See [[Clear Recent History]]

CS6 Bridge does not show adjustments made in Camera Raw

How can I fix this?

Dear Gene,
I LOVE YOU!!!! THAT DID IT!!! Thank you, thank you, thank you, thank you!!!!
I've spent hours on this issue, had to process 6,000 Iceland images in CS4 and then redo them in CS6 to be able to see the adjustments, and have spent at least 5-6 hours doing many re-installations and trolling the Adobe site in a circle just trying to contact support. WHEW!!!
I am very grateful for your help!! Thank you.
My warmest wishes,
Marianne
[email protected]
http://www.mariannebarcellona.com
http://www.barcellonaart.com
http://www.barcellonaphoto.com
http://mariannebarcellona.nyartistscircle.org/
1.212.864.7721
1.917.916.2080
Marianne Barcellona
749 West End Avenue, # 8B
New York, New York 10025
USA
Original message

Camera Raw 6.7 does not save XMP files

I am running Camera Raw 6.7 on a Windows XP machine.
In the Preferences under "General" I have the "Save image settings in" set to "Sidecar ".xmp" files.
And in the DNG File Handling, I do NOT have the "Ignore sidecar ".xmp." file check-box checked in.
But still when I alter a raw file and press Done the DNG file changes date/size and no XMP-file is
created in the directory. Also when Ioad the picture and "reset" it to "Camera Raw Default" and
press Done, the next time I open it is in the "Image settings" state anyway
Anyone have any idea what the problem could be ?
Regards,
Klas

Noel Carboni wrote:
Adobe has taken the decision to ALWAYS write metadata into file types they know the structure of.
Personally I find this approach apalling...
And you were accused of being an Adobe "fan-boy" only hours ago...
+1 vote for sidecar option - all file types...

TS3274 Camera does not save photos to picture roll

I snap pictures and shoot video but it does not save to "Photos" camera roll. This is a newly restored IPAD since I broke the screen on my old one. Everything worked as expected on old one. I have everything "on" under privacy.

If you are sure that all privacy settings are correct including anything in Photos in restrictions, did you try quitting the camera app and rebooting the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Report Template does not save

HI,
I am creating a new report template. On save I get this error: Error occurred while saving the document template; save again. Although I save again, it does not save the layout. At this stage I don't check the symbols as I have not yet created any into the layout. Even though I say 'check', it does not save at all.
Can anyone help. I have checked the File locations for Template folder to be correct C:\....\SAP\FrontEnd\SAPgui\wwi
Am on GUI 7100.3.12
Patch 12
Any recommendations ? Thanks

Hello Sanjay,
It seems to be DMS configuration issue. May be your system is trying to store the template document to external database by using "kpro". Please check for following two configurations:
1. Go to Basic Data & Tools-->Report Definition >Settings for Document Management>Assign EHS doc type to DMS doc type Here for doc type "SBV" , Ty. should be "SBV" and Data Carrier should be "SAP System" if you are not specifying any external server for document storage.
2. Next, Go to Basic Data & Tools-->Report Definition >Settings for Document Management> Check Doc types and doc statuses. Go to the "Details" of doc type "SBV", and uncheck "kpro" if checked.
If you have configured external server for WWI docs, then you need to define different data carrier.
Please tell if it solves your problem, otherwise you may be probably having problem with your document status management.
In that case, you may like to refer following SAP notes in sequence.
995736,1005225,1091699.
regards
Pavan

I am running a TRIAL VERSION of Adobe Photoshop CS6 Extended and Bridge does not open. Help?

I am running a TRIAL VERSION of Adobe Photoshop CS6 Extended on MAC and Bridge does not open. It did open when I first downloaded it - but now a black question mark is over the BR icon and it does not open up. Any ideas from anyone?

Hi Steve -
I just thought it was interesting and helpful to me to learn that the icon for Bridge does not appear anywhere. Not in Application Folder. Not in the Finders Directory Files. I see your point - if I could locate that icon - I'd be set by dragging it onto my DOCK and launching it from there.
So - I'm assuming I need to uninstall CS6. Please list all the steps for me to uninstall so that I don't miss any CS6 files.
When I search in FINDER for CS6 uninstall- I see two icons - red adobe "UNINSTALL ADOBE PHOTOSHOP CS6" (both files are identical) Under KIND they both say Alias - with two different dates they were last opened (in November - few minutes apart). Is that what I use to uninstall completely all the files related to PS CS6 Extended as well as Bridge?
Do I need to DEACTIVATE ANYTHING ANYWHERE?
DOES ANYTHING NEED TO GO INTO TRASH.
I just want to make sure 'everything' related to CS6 Extended is off my computer and out of all the files. In the event i want to re-install - naturally I don't want to run into any conflicting 'issues'.
Do you think if I reinstall I will run into this same problem again (BR not launching)? Is there anything I can do to prevent it? I note on the forums - going a few years back - that there have been a lot of issues related to this same problem - even in other versions of the Creative Suite. Is Adobe doing anything to rectify this problem for us Photoshop CS Suite lovers or is all their focus just going into CC?
Thank you so much for trying to help me resolve this issue. It is very frustrating to have an Adobe product that is not completely functional. Especially when the Creative Suites are so expensive. I appreciate all the time you've put into this issue.
Carole

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Bridge does not save adjustments in camera raw when I press done

Similar Messages

Maybe you are looking for