BRIDGE does not show every PNG with preview

Hello there,
my CS4-BRIGDE doesn't show my PNGs with a preview thumbnail.
I use to export them from Illustrator files but even if I open them in Fireworks or Photoshop to save them again, there is no preview on my PNGs. The explorer preview shows all PNGs only Bridge does not!
I have some PNG from an unknown source (too long ago to remember) which do have a preview!
Can anyone please! help?
greg

For a quicker response, I reccommend that you post your query on the Bridge forum: http://forums.adobe.com/community/bridge

Similar Messages

HT4075 when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not.

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not. Can anyone help?

If your phone is turned off or not connected to the Internet, you will be unable to locate it. Last known location is only stored for 24 hours.

ARQ: Role Import does not show roles in the preview

Dear All,
Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
I implemented SAP note#1897975 Role import does not show roles in the preview.
Still facing the same problem. Has any one faced this problem? Please suggest.
Regards,
Faisal

HI Faisal,
This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
Regards,
Neeraj Agarwal

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
     (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Bridge does not show VC status in Thumbnail

Hi,
since migrating to a new laptop, Bridge CS3 does not show the VersionCue status icons under the thumbnail, only in the inspector panel. I cannot find any hint in the docs how to get the status icons shown again. Any ideas?
Cheers
Thomas

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
Can anyone please help?
Thanks

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

Finder does not show new files with older creation dates

Short story: when I somehow create new files or folders with older dates, Finder does not show them.
This happens e.g. when I unrar archives created some time ago: the files or folders coming out of the archive get their original date, which is earlier than today.
I can see those files and folders without problems in a terminal (using ls). But they don't show up in Finder when I visit the same directory.
When I use terminal to go into some directory that is not yet visible in Finder, and I open a new Finder window for that directory from within terminal (using "open ."), the new directory and its contents will show up in Finder.
My best guess is that some things have changed in the way Finder and the indexing of my flle system co-operate. In any case, this is higly annoying.
Does anyone know how to fix this?
OS X Yosemite 10.10 (14A389)
Macbook Air - 13 Inch - Mid 2013

I have the same problem. I create files and they do not show up in their respective Finder window. I know the files are there because I created them and I can see them using Terminal and applications can open them. If I refresh the window by going to the parent directory and back again, the files do not show up. If I close all windows and open that specific window again, the files still do not show up. If I leave the computer overnight, the new files still do not show up. As brdsutte stated, after rebooting the computer, the files show up in the Finder window. Anyone have any suggestions?
iMac 27 inch, mid 2011
Yosemite 10.10.1

Bridge does not show image previews anymore on one of my drives

Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

CS3: Bridge does not show dng-files

First it started to refuses to show NEF files, and now, it will not show dng files - or at least some of my dng files.
What the H.... is wrong with this crap?

But I do not understand, why Bridge suddenly cannot see them - when it could a couple of days ago
CS3 is known for being the worst version of Bridge with very strange behavior. Might be preferences or cache related or some other strange reason. Fact is that using old software for new digital cameras has the only advantage as being cheap. You do miss a lot of functions, options and especially quality for developing your Raw files. CS6 has a complete new Raw process version called 2012. And since you use CS3 you still will be at process 2003 and already missed process version 2010.
So you seriously should consider buying CS6 ( you missed the option for an upgrade since this was shut down per december last year due to new upgrade policy) if you want to get the most out of your expensive new dSLR

PDF does not show correct font with RTF template

Hi,
I have some doubts regarding fonts in PDF reports.
when we create any XML report of PDF output type with RTF template, does the font used in the template has to be uploaded to the server?
I have create a RTF template to produce PDF output with arabic text in Times New Roman font but when i preview the template it shows courier font.
Please help.

Hi,
The document id is discussing general issues with Oracle Reports.
But my basic question is that Do i need to upload font to XML Publisher when i am using RTF template.
Or it is RDF report only for which i have to work with uifont.ali
Please reply.

Bridge does not show dimensions for .PDF and .AI files

Is there any way to see the dimensions in cm (or inch) for PDF and AI files in Bridge? I'm using Bridge CS5 4.1.0.54 as part of CS5.5 Design Premium, have set the preferences in Bridge to show them, but there are no values in the metadata fields for dimensions in inch/cm. I don't know if this behaviour is normal or if there's something wrong with my installation...
TIA,
Matthias

May be 'dimension' is not the right word/translation. In my german version it says 'Abmessungen (in Zoll)' or 'Abmessungen (in cm)', which should mean something like 'dimension' or 'size'. DIN A4, A5, US Letter, Legal etc. pp. in cm or inch.

Encore 2.0 does not show slideshow subtitiles in preview or DVD

I see this same problem in the past few months with CS3. I have the Master Collection with CS4 that has never worked on both my computers. My old copy of Encore 2.0 does work but I can't figure out how to add subtitles to my 37 slides. I clicked add subtitles, with discription and it shows on the Encore monitor. Looks like I have to use the Specify Link Dialog or an option to activate subtitiles when I preview my DVD. For the life of me, I don't see where I can do that! Can anybody tell me where this is?
Thank you
Art

You do that from the Button properties in the Link field.
Select the button that you are linking to the slideshow with, look in Properties and then click the arrow on the right in the Links field and when the popup menu comes up, choose Specify Link. From here, you can set the subtitle track to be active (choose Track 1).

Presets does not show anymore the live preview

The first three times I used Aperture 3, the "Presets" showed the live preview. Example : Presets/Color/Cross Process 1 showed a small image where I could appreciate before clicking. Now the live preview image is not shown anymore. I uninstalled Aperture completely and after reinstalling, it worked for a day or two. After that, impossible to get back the live preview. I'm working on the newest MacBookPro 17'' with 8GB Ram. I also installed the latest update of Aperture.
Can somebody help me? Thanks.

I had a glitch were all the adjustments and histogram appeared to be active at the same time as the quick preview was on. The sliders moved but no adjustment was applied. Maybe a similar problem? Allan

BRIDGE does not show every PNG with preview

Similar Messages

Maybe you are looking for