Bridge does not show image previews anymore on one of my drives

Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

Similar Messages

HT4075 when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
     (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

BRIDGE does not show every PNG with preview

Hello there,
my CS4-BRIGDE doesn't show my PNGs with a preview thumbnail.
I use to export them from Illustrator files but even if I open them in Fireworks or Photoshop to save them again, there is no preview on my PNGs. The explorer preview shows all PNGs only Bridge does not!
I have some PNG from an unknown source (too long ago to remember) which do have a preview!
Can anyone please! help?
greg

For a quicker response, I reccommend that you post your query on the Bridge forum: http://forums.adobe.com/community/bridge

Mail does not show images anymore server stopped responding on my iPad 2 when attempting to browse web

Over the last couple of days my ipad 2 has started to play up. First the mail would not show images in mail then when trying to browse the web it now will not open any pages. I have attempted a wipe & reload but still no difference.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Bridge does not open images in PS CC (or give an option), Instead it opens in PS CS6

Also, I can't set PS CC as a default using Windows 8. PS CC does not show on the list when choosing defaults for file types, etc. When in bridge, images open in PS CS6 and it does not have PS CC available as a choice when I right click and click "open with" (open with is not on the menu anymore.)

I am having the same problem. I've made sure I have Bridge CC open and when I try and open an image, the default is PS CS6, how do I change the default setting to be PS CC? Totally frustrating.

Muse 7.0 plus Chrome: browser does not show images full browser width

Hi there,
I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
Of course I already restarted application and computer. System: Mac OSX Mavericks.
What to do now? The presentation with the client is very soon and this bug makes me very nervous.
Best,
bartl

The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
Can anyone please help?
Thanks

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

FF5 does not show images that are 'moved permanently' (http response 301)

Our web app shows maps from OpenStreetmap. The webapp is secure, that is, is uses HTTPS. Now, IE complains horribly when the web page tries to load <img> via HTTP, because it's mixed content that that is considered baad.
So our webapp serves the images by responding via HTTPS with a 301 (moved permanently) to the real OpenStreetmap URL (with is HTTP). That fools IE to not complain.
Now, Firefox 5 suddenly does not show the map images AT ALL. This has worked beautifully with previous version (and all other browsers).
What's wrong?

I fixed the problem. (YAY!)
It was the way I embedded the files -- the Dreamweaver default does not work properly so I used the embed from this generator: http://www.bobbyvandersluis.com/swfobject/generator/index.html#alternativeContentHelp which now lets my navbar and swfobjects load properly. I also made sure that my slideshow (loader.swf) was set with wmode = opaque while the navbar is set to wmode = transparent. The div for the nav bar has z-index set to 5 while the div for the slideshow has z-index set to 1. Both have absolute positioning. I hope this helps anyone in the future that has trouble with overlaying flash (.swf) files.
Thanks for your reply and trying to help me solve this issue!

Bridge does not show VC status in Thumbnail

Hi,
since migrating to a new laptop, Bridge CS3 does not show the VersionCue status icons under the thumbnail, only in the inspector panel. I cannot find any hint in the docs how to get the status icons shown again. Any ideas?
Cheers
Thomas

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

TIFFs does not show in Preview app or DVDSP

I'm rendering TIFFs for subtitles using Belle Nuit.
The TIFFs (either TIFF-RLE for Final Cut Pro or TIFF-DVD for DVDSP) are generated just fine.
But they do not show when using the default Preview. Preview Inspector just says "No document"...(!)
I can view them just fine in Photoshop, QuickTime player 7 or other apps.
And the TIFF-RLEs works just fine in Final Cut Pro (but I can't look at the TIFFs beforehand using Preview).
Now, the problem really is that DVDSP does not show the TIFFs/subtitles at all - and that's a problem. The STL Graphics file works just fine. The TIFFs are placed on the Track just fine, but they do not show at all.
What might have happened? Checking one of the TIFFs, I have read/write access to the file.

Problem solved - semms like Apple did a change in the system-wide TIFF importer, that caused the TIFFs generated to be seen as 0x0 pixels in size.
The maker of Belle-Nuit have solved the issue in the 2.1.0b1 beta.

Stacked Column Chart Value does not show in Preview or SWF

I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
Edited by: Rich Krejsa on Apr 9, 2009 9:35 PM

Hi Rich,
Try to rebind the data with the component and preview and see.
Also check with other charts to see if you get the same behaviour.
Try placing a table component and display those cell and see what values are there when you preview.
There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
Let me know if this helps.
Thanks,
Amit Mathur.

Bridge CS3 not showing images

Today Bridge CS3 partially stopped working. Images do not show up in the content window but this is inconsistent. It happens with only selected folders. The data under filters does show the folder data. If I try to open (clicking on) a non-existent image in the content window, PS or Camera RAW will open for that image. I have one internal HD and 3 external LaCie drives. Copy an affected folder to a different HD or to the desktop sometimes works but only intermittantly. All the permits, etc. for the folders are the same, read/write permission granted and everything else the same. Sometimes folders that previously opened do not open at a later time.
I've tried restarting the computer and Bridge, no difference. Two events occurred prior to the problem. I installed Apple's latest security update and the new Adobe Reader update. Other than that nothing particular occurred. I am also using Lightroom2 which is working OK. The image are in the folders OK, open in PS, etc. They just don't show up in Bridge.
My computer skills are medium, been user since Photoshop 6.0, taken a number of PS workshops at SFW and Maine, and am competent at using the program. This is over my head. Help.
Bob Gaunt

Thanks Ramon,
It works but with a few other problems I pretty well sorted through. It took a couple of Bridge quit and restarts to get Bridge to open the external drives. Now that's OK. Then it seems at times to hang up trying to generate thumbnails, have to force quit Bridge and try over. Since Bridge worked fairly well for several years, I'm wondering what happened. Maybe just one of life's mysteries.
I have CS4 on the shelf, installed it and couldn't get the drivers for my Epson 2200 installed. The CS4 included generic driver is junk, Epson quit supporting the 2200, so I re-installed CS3 for the time being.
Bob

Alias to Image does not display image preview icon (Regression!)

I noticed that an alias to an image no longer displays the underlying image preview in the icon, instead you get the standard "JPEG" icon.
I have turned on icon previews (since other images in the same folder are correctly displayed) and all that. Also if you press Space on the Alias, the fancy Preview window will open and show the correct image. The icon however is dead. I've tested this with many images and with both OS created Aliases and using "ln -s".
This seems to apply to all kinds of alises that in the past would show the icon of their parent, not only images.
The alias "arrow" overlay is enough to inform the user that the file is an alias, there is no need to display the standard "JPEG" icon, that is so passé.
Not very leopardy.
Message was edited by: zeraien

The same thing appears to be a latent bug from Tiger -- I am seeing this in 10.4.11, and as Rob notes, it's not always consistent.
What's worse, Rob's suggestion won't work for me... because the "Select New Original..." button is greyed out! I realize this is technically a Leopard thread, but I can't imagine this was deliberately changed between 10.4 and 10.5, so I would think it would be applicable pretty broadly.
Any ideas or suggestions would be very welcome indeed.
Thanks,
/H

Animation does not show when previewed or published

I have an animation that appears to be working, and shows in edit mode, but that does not appear at all when I preview or publish. It is a countdown clock I need to an activity.

Hi there
What version of Captivate are you using?
If it's version 4, note that you may choose an Actionscript version to use.
Click Edit > Preferences...> Project node > Publish Settings node.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Bridge does not show image previews anymore on one of my drives

Similar Messages

Maybe you are looking for