Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
(Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Similar Messages

PSE 9 does not come with Camera Raw 6.2?

Photosho Elements 9 does not come with camera raw 6.2
, I downloaded the trial version which came with an outdated 6.1... the only version of 6.2 is for PSE8 and does not work with PSE9 how is this possible? How can they release a product with an outdated ACR????Now we have to wait for an update to a new product???Come on people!!!

Cheap shot, Phil. Up to now, Mac users got no Organizer but a special bonus: full Bridge, full access to full featured ACR. With this version, both platforms get the same stuff -- it's less than full Photoshop/Bridge CS5, at a small fraction of the price.
I admit, as a Mac user who shoots RAW, I liked the old trade-off...but I can understand the desire to make the two products consistent. If that makes PSE "inferior" for you than you should stick with Bridge CS4/Raw 5.7, or move up to the full-featured siblings, or switch to Lightroom.

I cannot download photos from my Sony A7r into Ltr. 5. Lightroom does not show this camera in devices or source. How is this done?

I cannot download photos using a card reader from my Sony A7r because Li\tr does not show this camera in devices or sources. How is this done.?

Answered in the two other similar threads you've posted.

Elements 11 states that it does not support the camera raw from my new Nikon D600 and that I should

Elements 11 states that it does not support the camera raw from my new Nikon D600 and that I should go to "the Camera Raw help documentation." When I click on the help menu I get a message from my browser stating that it is a dangerous website. Now what

Unfortunately it was clicking on Updates that brought the “dangerous website” pop-up, but several hours later I tried again for the umpteenth time, and it worked! I am so glad because I am working on a project with a deadline.
Thanks for replying. Maybe if someone else has this problem they could be told to wait a few hours and try again.
The main option on the ‘dangerous’ pop-up is a “Get me out of here!” button, which I always clicked. There are options to go to the website anyway, but I am too leery of the web to do that. Now that I know it’s possible to reach the update center without risk I will never consider it.
Thanks again,
Lynn

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
Can anyone please help?
Thanks

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

BRIDGE does not show every PNG with preview

Hello there,
my CS4-BRIGDE doesn't show my PNGs with a preview thumbnail.
I use to export them from Illustrator files but even if I open them in Fireworks or Photoshop to save them again, there is no preview on my PNGs. The explorer preview shows all PNGs only Bridge does not!
I have some PNG from an unknown source (too long ago to remember) which do have a preview!
Can anyone please! help?
greg

For a quicker response, I reccommend that you post your query on the Bridge forum: http://forums.adobe.com/community/bridge

Bridge does not show VC status in Thumbnail

Hi,
since migrating to a new laptop, Bridge CS3 does not show the VersionCue status icons under the thumbnail, only in the inspector panel. I cannot find any hint in the docs how to get the status icons shown again. Any ideas?
Cheers
Thomas

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

I have 2008 aluminum macbook with OS X Lion. It does not recognize my canon sd1000. Finder does not show the camera.

My macbook does not recognize Canon SD1000. Camera goes to transfer mode and it looks like the problem is the computer. Finder do not show the camera at all. (I am not using any programs, iphoto etc...).

Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

CS3: Bridge does not show dng-files

First it started to refuses to show NEF files, and now, it will not show dng files - or at least some of my dng files.
What the H.... is wrong with this crap?

But I do not understand, why Bridge suddenly cannot see them - when it could a couple of days ago
CS3 is known for being the worst version of Bridge with very strange behavior. Might be preferences or cache related or some other strange reason. Fact is that using old software for new digital cameras has the only advantage as being cheap. You do miss a lot of functions, options and especially quality for developing your Raw files. CS6 has a complete new Raw process version called 2012. And since you use CS3 you still will be at process 2003 and already missed process version 2010.
So you seriously should consider buying CS6 ( you missed the option for an upgrade since this was shut down per december last year due to new upgrade policy) if you want to get the most out of your expensive new dSLR

LR3 DNG Edit in Photoshop Does Not Open in Camera Raw

I have LR 3.2 64 bit and CS5 v12.0.1 64 bit and Camera Raw 6.2 under Windows 7. I do 95% of my editing in Lightroom. I do occasionally choose "Edit in Photshop" and in the past a DNG or CR2 image opened in Camera Raw (at least I think that is the case). Recently however, I noticed that if I have a DNG or a CR2 file, right click, and select "Open in Photoshop..." it opens the file directly in Photoshop, not in Camera Raw. I have tried deleting my LR3 preference, deleting my CS5 preferences, and deleting both, but the behavior does not change. Does anyone have an idea to explain this?
Thanks,
Alan.

Thanks for the quick response. For some reason I was thinking that it had happened that way in the past, but now that I think about it, I guess there would really be no reason for it to open in Camera Raw. Sorry for the unnecessary question.
Alan.

Bridge does not show image previews anymore on one of my drives

Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

Elements 10 does not update the Camera RAW 6.6 file

I have downloaded Camera RAW 6.6 mul zip file.
When I try to open it Elements 10 says ERROR. Cannot open this type of file.
This is the problem

Hi,
When you tried the manual instructions, did you get the same error code or a different message?
The error code U41m1c212 basically means that your PC isn't connecting to the Adobe update server - could be a firewall or anti-virus software problem. Downloading and installing manually should have avoided that connection problem.
After you downloaded the file, did you unpack it?
If you go to the top of this page, there is a search box. If you enter U41m1c212 there it will find lots of entries with various suggestions that may help.
Brian

CS6 Bridge does not show adjustments made in Camera Raw

How can I fix this?

Dear Gene,
I LOVE YOU!!!! THAT DID IT!!! Thank you, thank you, thank you, thank you!!!!
I've spent hours on this issue, had to process 6,000 Iceland images in CS4 and then redo them in CS6 to be able to see the adjustments, and have spent at least 5-6 hours doing many re-installations and trolling the Adobe site in a circle just trying to contact support. WHEW!!!
I am very grateful for your help!! Thank you.
My warmest wishes,
Marianne
[email protected]
http://www.mariannebarcellona.com
http://www.barcellonaart.com
http://www.barcellonaphoto.com
http://mariannebarcellona.nyartistscircle.org/
1.212.864.7721
1.917.916.2080
Marianne Barcellona
749 West End Avenue, # 8B
New York, New York 10025
USA
Original message

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Similar Messages

Maybe you are looking for