Bridge does not show VC status in Thumbnail

Hi,
since migrating to a new laptop, Bridge CS3 does not show the VersionCue status icons under the thumbnail, only in the inspector panel. I cannot find any hint in the docs how to get the status icons shown again. Any ideas?
Cheers
Thomas

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

Similar Messages

Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
Can anyone please help?
Thanks

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
     (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Miix 3 does not show battery status in Taskbar

Hi,
I own a new Miix 3 that works w/o problems. But it does not show the current battery status in the task bar or anywhere else. I checked windows' Device manager. There is no battery listed, only the external power device. I assume Windows 8.1 does not recognize the tablets' battery or the driver is missing. It seems the software/drivers is up to date.
Does anyone else have the same problem or see a solution for that problem?
Thanks in advance,
Kauzi

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

BRIDGE does not show every PNG with preview

Hello there,
my CS4-BRIGDE doesn't show my PNGs with a preview thumbnail.
I use to export them from Illustrator files but even if I open them in Fireworks or Photoshop to save them again, there is no preview on my PNGs. The explorer preview shows all PNGs only Bridge does not!
I have some PNG from an unknown source (too long ago to remember) which do have a preview!
Can anyone please! help?
greg

For a quicker response, I reccommend that you post your query on the Bridge forum: http://forums.adobe.com/community/bridge

OEM 12c Agent does not show down status.

Hi, I'm testing EM 12c. I added host target to oem and then kill agent process on host.
When open agent page (Setup-Agent-Testingagent) see error.
Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms).
But status agent and host show up in EM.
I try resync agent, But nothing has changed it.
./emctl status agent
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent is Not Running
Other target (hosts,agent) show status correctly.
Thanks for help.

EM is showing Host is up makes sense. If I remember correct the OMS pings the host if the agent is down. This will succeed so the host will show up.
Why the agent is showing up does not make sense to me. The agent sends a signal every (default) 120 seconds. If no signal is received by the OMS the OMS sends a reverse ping to the agent. If this does not succeed the agent and its monitored targets should get the state “Agent Unreachable”.
Eric

App Store does not show download status.

Hi There,
in need a bit of help.. apparently, the App store on my macbook pro does not sure any download status for the apps i download. However, i do see a growing bar on my dock for the app i am downloading.
Is there any way i can get it to show?

If you are currently downloading any app and you just lost the status bar from the launchpad which shows apps on your mac with a large overlaying icon app, just try to download any free app (games or utility etc) from the app store and install it, it will bring you back to the window of the launchpad where you can see the status of your downloads....you will notice that I was downloading the Mavericks OS but the download status wont show up on the app store..you will see the status instead on the launchpad, I am using Lion 10.7.5 so I do not have the launchpad icon on my DOCK, maybe I am also just missing the shortcut to launch it. I just discovered that when you install another app from the app store it will bring you this window back, by clicking on the currently downloading app, it will pause the download and will proceed with the other app to finish its process....
I hope this would help.....by the way, with my macbook pro 10.8.5, download status is present on the app store when I was downloading the Mavericks a while ago....

Bridge does not show image previews anymore on one of my drives

Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

CS3: Bridge does not show dng-files

First it started to refuses to show NEF files, and now, it will not show dng files - or at least some of my dng files.
What the H.... is wrong with this crap?

But I do not understand, why Bridge suddenly cannot see them - when it could a couple of days ago
CS3 is known for being the worst version of Bridge with very strange behavior. Might be preferences or cache related or some other strange reason. Fact is that using old software for new digital cameras has the only advantage as being cheap. You do miss a lot of functions, options and especially quality for developing your Raw files. CS6 has a complete new Raw process version called 2012. And since you use CS3 you still will be at process 2003 and already missed process version 2010.
So you seriously should consider buying CS6 ( you missed the option for an upgrade since this was shut down per december last year due to new upgrade policy) if you want to get the most out of your expensive new dSLR

Bridge does not show dimensions for .PDF and .AI files

Is there any way to see the dimensions in cm (or inch) for PDF and AI files in Bridge? I'm using Bridge CS5 4.1.0.54 as part of CS5.5 Design Premium, have set the preferences in Bridge to show them, but there are no values in the metadata fields for dimensions in inch/cm. I don't know if this behaviour is normal or if there's something wrong with my installation...
TIA,
Matthias

May be 'dimension' is not the right word/translation. In my german version it says 'Abmessungen (in Zoll)' or 'Abmessungen (in cm)', which should mean something like 'dimension' or 'size'. DIN A4, A5, US Letter, Legal etc. pp. in cm or inch.

[For M5000 Server] prtidiag -v does not show enviromental status

In our M5000 server we cant not see environmental info in *'prtdiag -v'* output.
But in our V890 we can see environmental status
Can anyone help me how to turn on environmental info for this server?
Case M5000:
#prtdiag -v
(output ommited)
=================== Environmental Status ===================
Mode switch is in LOCK mode
=================== System Processor Mode ===================
SPARC64-VII mode
Case V890:
#prtdiag -v
(output ommited)
=============== Environmental Status ====================
System Temperatures (Celsius):
========================
Device Temperature Status
========================
CPU0 74 OK
CPU1 61 OK
CPU2 62 OK
CPU3 60 OK
CPU4 68 OK
CPU5 74 OK
CPU6 69 OK
CPU7 73 OK
MB 33 OK
IOB 27 OK
DBP0 26 OK
===================
Front Status Panel:
====================
Keyswitch position: LOCKED
System LED Status:
GEN FAULT REMOVE
[OFF] [OFF]
DISK FAULT POWER FAULT
[OFF] [OFF]
LEFT THERMAL FAULT RIGHT THERMAL FAULT
[OFF] [OFF]
LEFT DOOR RIGHT DOOR
[OFF] [OFF]
(output ommited)

Hi.
You can't monitor environment for M5000 from Solaris.
You need use XSCF for do it.
As hook:
Generaly you have DSCP network between Solaris and XSCF.
You can create user on XSCF with limited permissions, put ssh key for login as this user from Solaris to XSCF without password prompt.
After this you can use command like:
ssh env_user@xscf_name environment
For more available commands on XSCF - read Docs.
Regards.

CS6 Bridge does not show adjustments made in Camera Raw

How can I fix this?

Dear Gene,
I LOVE YOU!!!! THAT DID IT!!! Thank you, thank you, thank you, thank you!!!!
I've spent hours on this issue, had to process 6,000 Iceland images in CS4 and then redo them in CS6 to be able to see the adjustments, and have spent at least 5-6 hours doing many re-installations and trolling the Adobe site in a circle just trying to contact support. WHEW!!!
I am very grateful for your help!! Thank you.
My warmest wishes,
Marianne
[email protected]
http://www.mariannebarcellona.com
http://www.barcellonaart.com
http://www.barcellonaphoto.com
http://mariannebarcellona.nyartistscircle.org/
1.212.864.7721
1.917.916.2080
Marianne Barcellona
749 West End Avenue, # 8B
New York, New York 10025
USA
Original message

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

GL posting clearing item amount and do not show doc status on the header

Hello,
GL post clearing amount both side and increase the no of items in the GL balance display. Inaddition, these clearing line item document header does not show document status field. I have another GL which does not post extra two lines and clearing item document is empty and header shows document status as A (cleared item).
Could you let me know what the difference and what need to be changed to make it not to post clearing items + and - and show doc status.
Both are same FSG and only difference tick mark not done for balance in local currency.

Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
RR

Meta data does not show up in Illustrator

Metadata added in Bridge does not show up in the file info in illustrator right away. You need to import XMP to have the metadata in the illustrator file.
I have about 10.000 files, is there and easy way of getting the Metadata (keywords mostly) into the files?

Probably should post in the Illustrator Froum.

Bridge does not show VC status in Thumbnail

Similar Messages

Maybe you are looking for