Bridge doesn't start

after i updated photoshop, indesign and illustrator cc
bridge doesn't start (crash until starting)

Have you searched the forum? There are several similar reports.

Similar Messages

Bridge doesn't Start, Bridge mini is running (PS6)MacPro, i7, OSX 10.7.4

Bridge doesn't Start, Bridge mini is running (PS6)MacPro, i7, OSX 10.7.4
Horst Koch,
Community Member
23.05.2012 13:29
Bridge stürzt immer ab, bzw. startet erst gar nicht, Bridge Mini unter PS 6 läuft
MacPro, i7, OSX 10.7.4 (Neueinrichtung)
Adobe reader 10.1 läßt sich nicht starten
meldung "interner fehler ist aufgetrten"
Update PS 6 läßt sich nicht installieren
möchte Zugriff auf eine nicht vorhandne Library/User Datei

Have you tried resetting preferences by holding down Option key and starting Bridge? Should get reset window with 3 options. Choose all 3.

Bridge doesn't recognize its own .xmp files

Using Bridge CS3 on Mac OS 10.5.8. I edit RAW (.nef) files in ACR. When I click done, save, or open image, an .xmp sidecar file is generated and saved in the same folder as the .nef. However, changes made in ACR do not show in the preview thumbnail in Bridge, and when I re-open the file in ACR, my changes are lost. The .xmp file is still there, it's just not applied. It's like Bridge doesn't know the .xmp file is there. The icons in Bridge indicating altered develop settings or crops do not appear after adjudstments are made. Star ratings made in Bridge remain. When this issue began, it would ignore sidecar files for some images, but not others. It is increasing in frequency, or may now be consistent. (If I open the file into Photoshop or save an image file out of ACR, the changes are applied to the developed image file, they are simply ignored by Bridge in regards to the Raw file.)
Files that were adjusted before the problem began still synchronize with their sidecar files. Looking at the sidecar files in a text editor shows that they contain the adjustments made.
There were no changes in any installations/updates to software or OS at the time of the problem's onset.
I've tried using a Camera Raw database instead of sidecar files, and the changes are still lost. I've tried purging caches for Bridge and for ACR. I've tried resetting and dumping preference (.plist) files.
Anyone have ideas on what I can do to salvage this program as my RAW library manager?

Matthew,
Same problem here. But I'm using CS5 in Win7.
Bridge cannot find its XMP files. Bridge does not see its XMP files. XMP files do not work. Camera Raw settings do not show in thumbnails. ACR settings lost.
I just now figured out the problem/solution.
In my case, the association between CR2 files and Bridge was usurped by Canon DPP (the Canon raw converter) which I just installed this afternoon. When I installed it, there was no immediate problem. But when I started a new work session tonight, Bridge acted as if the XMP files weren't even there.
Solution: In Windows, to set a file association, you just right-click on a file (in this case the CR2 file) and select "Open With", and then navigate to Bridge (in my case Bridge CS5). That re-establishes the link between Bridge and its own XMP files. Then simply purge your cache and let Bridge rebuild it using its XMPs (which it can now find again) to rebuild the cache with the adjustments that are stored in the XMPs.
I don't know how to do this on a Mac, but the principle is the same.
I hope this solves your problem.
Dave

Xorg doesn't start after update

After updating this day (my system was last updated at the beginning of July
this year) I have some problem with Xorg. The server just doesn't start, and
the screen is black. I can get back to the console with Alt-F1.
Here's my Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "LCD Display"
(**) | |-->Device "SiS"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.9.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
Backtrace:
And here's what the server writes out:
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
Any ideas? Because I have no idea, what is happening.
Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
(I think it was caused by some error during copying files while updating my system.)
Last edited by TPJ (2008-08-08 08:42:13)

sand_man wrote:Is /tmp full?
Damn you're right. The pacman cache filled the disk...
Problem solved - thanks!
Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
Last edited by Isildur (2009-08-16 14:22:23)

Bridge doesn't allow me to turn on color management

Any idea why Bridge doesn't allow me to edit/turn on color management? When I go to Edit>Creative Suite Color Settings I just get an error. Says I must launch at least one qualifying CS product. As I have Dreamweaver CS5.5 and PS CS5 running I never know what the issue is. Any ideas? Adobe help is useless on this.

If that is the case, Adobe needs to do a better job in how the settings function. For example, instead of just getting an error message with a confusing statement, the message would provide further clarification and also solutions. The message says one needs to have at least one program running to set up color management. It doesn't say one entire color suite. But thanks so much for responding to my questions.
A bit of the problem is that writing a manual and a help file is not that easy at all. But when it comes to complicated applications like PS and combined with other applications it really is a difficult task. I'm not saying Adobe succeeds clearly in this task because it is not easy to find your way in the new help files but with a bit effort you will soon explore there is a lot of information about understanding color in the PS on line manual (use the menu help / Photoshop Help and your browser shows a page from product support. Top right above there is the option to download the PDF manual. And in the provided list on your browser window you see also the option for Creative Suite, click on it and you will see a complete chapter about Color Management.
While I know a bit of this subject I'm certainly no expert. It is a complex matter but the basics are not that difficult and the result of your learning effort will pay it self back
Another issue I have noticed is that Bridge does not do a good job at updating thumbnails. I frequently have to hit F5 to refresh when this should happen automatically. I use a Windows 7 machine and perhaps all of this works better on Macs - I don't know.
That should not be needed on either Mac or Windows. While no knowledge of Windows at all to me it seems related to a cache problem. First point Bridge to the folder that gives you this problem and then choose the menu Tools/ cache / purge cache for folder. See if this gives better results. If so and you have other folders with same problem use the option to purge the entire cache and have a fresh start. You need a bit of time because all thumbs and previews have to rebuild.

Not a discusion- a BIG problem. My Bridge doesn't work.

My Bridge doesn't work. CS5, used with Windows 7, 16GB RAM. Problem out of the blue. Message: Bridge encountered a problem an dis unable to read the cache. Please try purging central cache in cache in preferences to correct program." Did this. Problem persisted. Uninstalled total CS5 and Bridge. Reinstalled my progra. Rebooted after each step. Bridge still crashes my system. If I open a folder with 5 images it works. If I open a folder with 100 images system crashes. This is not happenign with my laptops, same CS5, same 16 GB RAM. Without Bridge I can't edit.

Have you tried clearing Bridge's preferences by pressing and holding Control - Shift - Alt while starting Bridge?
Be aware you'll need to re-setup all your preferences.
-Noel

Problem E60 - Update - The phone doesn´t start

Hi,
can please somebody help?? I have updated my Nokia E60 (Firmware 3.0633.09.04), but the phone doesn´t start now!
How can I reinstall operation system of this phone%
Please help.
Thx.

Try this
connect the phone to a wall charger > press and hold power & volume up > let it charge for 30min or so then repeat the update process or use SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to give Kudos (Click on the half star + )
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Recently my phone updated itself to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want it just clicks but doesn't start to download any help?

recently my phone updated to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want and it just clicks but doesn't start to download, i can see thats its not signed in so i tried to re set up my account under the app store in settings , but its just a grey area and wont let me click to input any information. this happened right after i updated my phone, any help?

Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari

SAP NETWEAVER COMPOSITION ENVIRONMENT 7.1 EHP1 - System doesn't start

Hello, 
 
after i get the message the installation was succesfully and i start the server the proces jstart.exe 
 
doesn't start completely. 
 
in the trace file dev_jstart in find this error message: 
 
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE 
F arg[ 1] = -nodeId=1000 
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_sjodevb1 
F arg[ 3] = -DSAPINFO=CE1_00_collector 
F arg[ 4] = -hostvm 
F arg[ 5] = -nodeName=collector 
F arg[ 6] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties 
F arg[ 7] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm 
F arg[ 8] = -traceFile=D:\usr\sap\CE1\J00\work\dev_collector 
F arg[ 9] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_collector.out 
F arg[10] = -clusterId=bootstrap 
F arg[11] = -exitcode 
F arg[12] = 503 
 
an in the tracefile log_bootstrap.0 this error message: 
 
[Nov 19, 2009 5:17:50 PM ] Exception of type com.sap.sql.log.OpenSQLException caught: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16.
 at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
 at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
 at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:546)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:505)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:136)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:357)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:157)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:127)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:262)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:39)
 at com.sap.engine.bootstrap.HelperImpl.getConfigurationHandlerFactory(HelperImpl.java:38)
 at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:111)
 at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:74)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:229)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.lang.ClassNotFoundException: com.sap.dbtech.jdbc.DriverSapDB
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:909)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:800)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:748)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
 ... 22 more
 
 
any idea? 
 
 
thank you for your help 
thomas 

Hi Angie,
You will find the needed information here - http://service.sap.com/~form/handler?_EVENT=DISP_NEW&_APP=00200682500000001303&00200682500000002804=01200615320900001418
Release to Customer Available 09.05.2007
Default Release Available 14.12.2007
Good Luck!!!
GLM

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

Chromium doesn't start and suspend, shutdown don't work occassionally

Hello,
I have this problem on my laptop but since chromium doesn't start on my desktop either, I don't think it's specific to laptops.
When I try to start chromium in a terminal, I get a blank window (I can tell because I use spectrwm):
ATTENTION: default value of option force_s3tc_enable overridden by environment.
[25148:25148:0215/130205:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
I temporarily resorted to using Firefox instead, but at times it just freezes up while opening some pages. After that point, even killing firefox doesn't help: the system load level keeps on rising. I used pidof to check if firefox is still running, but I had no output from pidof. After having firefox to freeze, shutdown, suspend, etc don't work. The laptop goes to a black screen state, but the power LED remains on indefinitely.
These might be two separate issues, but they started together on my laptop.
Thanks in advance!
Last edited by SgrA (2015-02-15 09:47:08)

I also have issues wich starting up chromium (google-chrome and opera too).
Feb 15 10:09:58 localhost kernel: [ 102.301038] chromium[786]: segfault at 7ffffd294ff8 ip 00007fb4386962b2 sp 00007ffffd295000 error 6 in chromium[7fb43371e000+66c6000]
Feb 15 10:12:16 localhost kernel: [ 240.102784] chromium D 0000000000000000 0 786 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102789] ffff8800c2d5bb68 0000000000000082 ffff8800c5635a90 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102793] ffff8800c2d5bfd8 0000000000013640 ffffffff81818540 ffff8800c5635a90
Feb 15 10:12:16 localhost kernel: [ 240.102796] ffff8800c2d5bb78 0000000000000246 ffffffff81a52047 ffff88042f5eeb08
Feb 15 10:12:16 localhost kernel: [ 240.102799] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102809] [<ffffffff8109e777>] ? try_to_wake_up+0x1e7/0x380
Feb 15 10:12:16 localhost kernel: [ 240.102814] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102818] [<ffffffff81553e25>] rwsem_down_write_failed+0x175/0x360
Feb 15 10:12:16 localhost kernel: [ 240.102823] [<ffffffff812c0e63>] call_rwsem_down_write_failed+0x13/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102827] [<ffffffff81553604>] ? down_write+0x24/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102832] [<ffffffff8122c5cd>] do_coredump+0x16d/0xf30
Feb 15 10:12:16 localhost kernel: [ 240.102837] [<ffffffff81080524>] ? force_sig_info+0xd4/0xf0
Feb 15 10:12:16 localhost kernel: [ 240.102841] [<ffffffff8107e3d7>] ? __sigqueue_free.part.15+0x37/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102846] [<ffffffff8108180c>] get_signal+0x38c/0x710
Feb 15 10:12:16 localhost kernel: [ 240.102852] [<ffffffff81014617>] do_signal+0x37/0x800
Feb 15 10:12:16 localhost kernel: [ 240.102855] [<ffffffff81550f08>] ? __schedule+0x3e8/0xa50
Feb 15 10:12:16 localhost kernel: [ 240.102859] [<ffffffff81014e48>] do_notify_resume+0x68/0xa0
Feb 15 10:12:16 localhost kernel: [ 240.102863] [<ffffffff81556322>] retint_signal+0x48/0x86
Feb 15 10:12:16 localhost kernel: [ 240.102871] Watchdog D 0000000000000004 0 794 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102874] ffff880402757d40 0000000000000082 ffff8800c5632840 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102877] ffff880402757fd8 0000000000013640 ffff880418841420 ffff8800c5632840
Feb 15 10:12:16 localhost kernel: [ 240.102880] ffff880402757ce8 ffff880402757e70 00000000ffffff92 ffff880402757c98
Feb 15 10:12:16 localhost kernel: [ 240.102883] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102888] [<ffffffff810dbe32>] ? hrtimer_cancel+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102893] [<ffffffff810ed4e6>] ? futex_wait+0x206/0x280
Feb 15 10:12:16 localhost kernel: [ 240.102897] [<ffffffff810dbbc0>] ? __run_hrtimer+0x250/0x250
Feb 15 10:12:16 localhost kernel: [ 240.102900] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102903] [<ffffffff81553c65>] rwsem_down_read_failed+0xe5/0x130
Feb 15 10:12:16 localhost kernel: [ 240.102906] [<ffffffff810ed0d0>] ? futex_wake+0x80/0x160
Feb 15 10:12:16 localhost kernel: [ 240.102910] [<ffffffff812c0e34>] call_rwsem_down_read_failed+0x14/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102913] [<ffffffff815535d7>] ? down_read+0x17/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102918] [<ffffffff81060aed>] __do_page_fault+0x1ed/0x600
Feb 15 10:12:16 localhost kernel: [ 240.102923] [<ffffffff8110e7f9>] ? seccomp_phase1+0x99/0x210
Feb 15 10:12:16 localhost kernel: [ 240.102927] [<ffffffff81060f22>] do_page_fault+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102930] [<ffffffff81557598>] page_fault+0x28/0x30
Feb 15 10:12:43 localhost kernel: [ 267.288947] chromium[920]: segfault at 7fff3faceff8 ip 00007fa90fcc62bc sp 00007fff3facf000 error 6 in chromium[7fa90ad4e000+66c6000]
It started happening after upgrade:
[2015-02-15 09:43] [ALPM] upgraded chromium (40.0.2214.94-1 -> 40.0.2214.111-1)
I was wondering if it has anything to do with some X-related upgrades:
[2015-02-15 09:42] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:43] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:48] [ALPM] upgraded xorg-server-devel (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:45] [ALPM] upgraded nvidia (346.35-5 -> 346.35-6)
I tried to downgrade chromimu to 40.0.2214.94-1 and it didn't help. I tried to downgrade nvidia, xorg-server and xorg-server-devel to previous versions, when everything worked and X chouldn't start.
Other observations are that if I start chromium, the ps command hangs and I have to reboot the system to be able to use ps command again.
Linux lisa 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
It's worth mentioning that I also run spectrwm, like SgrA, however i don't have other issues with freezing on shutdown etc.

Remote Update Manager on Yosemite doesn't start

Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
In the console, I see these lines:
Any suggestions?
Many thanks

Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

Apple logo comes up but ipod doesn't start

When I turn on the device the Apple logo comes up but the ipod doesn't start and go to the menus it just stays with the logo. When I hold down the play/pause on the click wheel to put it to sleep a symbol of a triangle with an exclamation point in the center comes up along with "www.apple.com/support/ipod." I tried rebooting it with Menu/select but nothing happens.

Unfortunately, on a "classic" iPod that uses a hard drive for storage, the most likely cause is a faulty hard drive.
You can try putting the iPod into Disk Mode
http://support.apple.com/kb/HT1363
If that works, connect it to the computer and run iTunes. iTunes may prompt you to do a Restore. This will erase the iPod, re-install its software, and set it to default settings. If the cause is data corruption or a software issue (and the hard drive has no physical problem), the Restore should fix it.

Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

RT app doesn't start on power-up or re-boot

Hi Again, Gang:
This one is stumping me. I've finished a cRIO application, and am now in the process of getting it ready for distribution. The RT part of the app runs fine when I upload it from the host PC. When I set the app to run at startup from NV RAM, it doesn't run. Well, actually, to make matters worse--it DID run ONCE! This morning I powered the cRIO, then did other things for a while. I later looked at the unit and saw the user LED was flashing the sequence that says it's working.
I've read through the troubleshooting stuff on the web site. I've FTPd into the box and it looks like it's set up right. The dip switches are all off. I've waited for 10 mins to see if comes up after a while. I've experimented with the FPGA upload settings to see if that's the issue. (The RT won't get very far if the FPGA doesn't start) Is it possible that something with the shared variable engine is holding it up?
I'm about out of ideas. I really hope that someone can give me some!
Thanks in advance!
Roger

hi!!
Have you got any solutions. it seems there some bugs in lv2010. we are facing similar problems. some times every thing works but after restart it shows some error(blinking of yellow LED on RT).some time variable are not being published .i am working with mutltiple target in a single project. i have tried all options like auto deploy variable(ON/OFF)
seperate libraries for each target eventhough applications is similar for all targets. Just shareing my experience(pain)
Regards
Nageswar

Bridge doesn't start

Similar Messages

Maybe you are looking for