Bridge doesn't work

I cannot find bridge on my computer even though i have uninstaled cs6 and cc says that it is up to date

Moving this discussion to the Creative Cloud Download & Install forum.
Lsiegling_2c8FHm please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to reinstall Bridge CC.

Similar Messages

Not a discusion- a BIG problem. My Bridge doesn't work.

My Bridge doesn't work. CS5, used with Windows 7, 16GB RAM. Problem out of the blue. Message: Bridge encountered a problem an dis unable to read the cache. Please try purging central cache in cache in preferences to correct program." Did this. Problem persisted. Uninstalled total CS5 and Bridge. Reinstalled my progra. Rebooted after each step. Bridge still crashes my system. If I open a folder with 5 images it works. If I open a folder with 100 images system crashes. This is not happenign with my laptops, same CS5, same 16 GB RAM. Without Bridge I can't edit.

Have you tried clearing Bridge's preferences by pressing and holding Control - Shift - Alt while starting Bridge?
Be aware you'll need to re-setup all your preferences.
-Noel

Sony Bridge doesn't work on my mac/phone.

So I have a Sony Xperia U and my Mac is version 10.5.8 and I've downloaded this Sony Bridge but it doesn't work, I connect my phone to my computer and nothing happens, my phone just starts charging with the computer and that's it. What version of Sony Bridge should I download then? What should I do?

Try installing Bridge for Mac from this link instead and check if you can get any connection.
http://www.sonymobile.com/gb/tools/bridge-for-mac/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Bridge doesn't work it crashes everytime how do i get this working?

It says Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation,
I have - it didn't work.

Try removing your case. If still an issue, take it in to Apple. You have a 1 year warranty.

Saving DNG as copy via Bridge-doesn't work!

Hi, i just started using Bridge CS3 to download and backup (to an external HD). I download them onto my desktop, converting them to DNG in the process (all is well with that); however, when i ask it to save copies to an external HD, hence creating two sets of files, the copies are RAW not DNG. I don't understand that as the point of making the backup copies is to have an original DNG set of files. I thought perhaps i was doing something wrong but all my playing around does not get me DNG files as copies - is that on purpose? Am i doing something wrong? Or don't i understand the purpose of "save copies to:"?
All instructions greatly encouraged, please.

Hi Taiyo,
It sounds like you are using Adobe Photo Downloader via Bridge's "Get Photos From Camera..." menu command.
The "save copies" feature will save copies of the original RAW files during the download process; you are seeing the feature work as designed. Some photographers want to keep both DNG files as well as the original original RAW format files, and others choose to keep only the converted DNG files.
These original RAW can be used as part of a backup workflow, but the "save copies" option alone does not provide the kind of backup workflow I think most photographers want to use. For example if the photographer's intent is to keep the original RAW files as well as the DNGs (I understand that in your case, you just want to backup DNGs), then a robust backup would probably put backup copies of *both* the DNGs and the RAW files on an external hard drive (or more than one external hard drive).
One way you can use Bridge to save backup copies of your DNGs after they've been downloaded is to select the new DNGs in Bridge and use the "Copy To" command in the Thumbnail contextual menu to make copies of the DNGs on your external drive. Right/Control Click on one of the selected thumbnails to bring up the menu. Recently browsed folders and folders you are browsing in other Bridge windows will appear in the "Copy To" list. A "Choose Folder..." command also lets you make copies to folders you have not yet browsed with Bridge.
-David

SonyMac bridge doesn't work

It only gives me no xperia device connected. I have unplugged and replugged. Deleted and download the thing and nothing. Everytime I have to fiddle with it until it works or i give up.. and it consumes insanly amounts of memory for not doing anything...
I have a mac osx 10.10 and the mac bridge 4.1. The phone E1 i think model D2005 with android 4.4.2.

I dont have access to any other computer.

Westell 6100 (Verizon) and WRT54G v5 Bridging Doesn't Work

I have a Windows XP eMachines PC where I use Verizon DSL on, and there's no problem with that connection at all. For the past year, I've been trying to get networking to work on a WRT54G, first on a v4, then a v5, which I have currently. Nothing has worked, and I've tried over ten times.
My most recent attempts were on June 10th 2007, where I spent over three hours talking to Verizon's technical support and toggling the modem and router's settings.
I've already tried help from three different technical support employees at Verizon (on said recent attempt)--all three of which gave me the same instructions on the modem settings and the last of whom checked my modem settings via remote desktop and declared it was all correct. He eventually directed me to get help from Linksys.
I'm not sure if it helps but the serial number for my Linksys router is CDFB0E805143. The firmware is the most recent.
What happens when I try to get the router to work: After setting all of the modem's settings to the appropriate values and connecting it to the router, I set the router's settings to DCHP as Verizon's tech. support told me to. However, when I check the Status page, all IP listings are 0.0.0.0 and won't connect at all when "Connect" is pressed.
I then have to System Restore everything to edit the modem's settings back to the default values in order to use the modem as I did before I tried linking it to the router. Without that, when I try 192.168.1.1 with the modem, it won't work anymore.

First things being First, Connect the Modem directly to the Computer.
If Online through the Westell DSL modem, check the IPADDRESS
[ start - in ' start search ' field , type cmd, press return, you get a
DOS Prompt - type ipconfig - check the IP Address for Ethernet LAN
Connection ] and confirm whether it’s a Cable [ NAT Series ] or a DSL -
Presumably when you are using a Modem such as Westel 2200 or
6100 Series, the IP Address will be of the range : 192.168.1.x.
Under such a scenario, Connect the Modem / Computer to the Router,
Press the Reset on the Router for 5- 10 Seconds ;
powercycle the Modem and the Router, Then need you have to log in
to the Router's Setup Page [ Open a browser, type http://192.168.1.1
in the Address bar of Internet Explorer ] It will prompt for Username
and Password : Leave the Username blank and type admin as the
Password ] and below Setup Tab, change it's Local IP Address to
192.168.3.1 or 192.168.5.1 .Then After powercycling the Modem and
the Router, You could connect the Computer to Port 1 or Port 2 , and
check the Online Connectivity.
It should work.
* If you have a PPPoE Connection from the ISP, Get the Username
and Password from them , which has to be configured on the Router.
Recurring Issues with the Router could be fixed by Firmware Updates
Revert Back in case of any Assistance . . .

Bridge doesn't even open - partial uninstall?

I purchased CS6 and installed it - I think everything worked fine when installed. A couple of months later, my bridge program just stopped working - on the windows 7 pro desktop and almost immediately on the win 8 laptop. And of course, if Bridge doesn't work, neither does mini-bridge.
Today is the day to fix all the stupid techie issues... Is there a way to fix Bridge without uninstalling the entire package on both computers? I'm not familiar with an overall program management screen that would let me select what to uninstall and/or repair.
Thanks!

No, Bridge requires the main program to be installed and it will just tag along. Run the Creative Cloud Cleaner Tool and simply reinstall PS, then be careful to not apply the latest update again that introduced this issue.
Mylenium

Bridge CC is asking my to 'purge cache'. When I do this doesn't work and freezes my mac. Bridge is unable to work at all. Please help?

When I start up Bridge CC I get a error message instructing me to purge cache in preferences which I do but it doesn't work and freezes my mac. I cannot curretnly use Bridge CC. PLease help as this is costing me time and money - thank you in advance....

Hold down the Option key as you launch Bridge, keep it down until you see a dialog box, then click all three options in the re-set box that comes up.
If you don't see that re-set box, you're doing it wrong, i.e., you're not holding the Option key down fast enough.

Web gallery built in Bridge, then linked from DW site, doesn't work

Hi,
Using the "web gallery" function in Adobe Bridge CS5, I created an HTML-based web gallery and uploaded it directly from Bridge to here on the web:
http://www.sws-steel.com/test2/SouthwestSteel/
I can view this in Safari 5.0.5 on my Mac, but it's a blank white page in Firefox and in Chrome. Even worse, my client gets a blank page in every Windows-based browser.
If I can get it to work at all, my intent is to add it within a frame on this page:
http://www.sws-steel.com/temp/photos.html
Again, it seems to work in Safari (but only after a refresh on an iPad), but doesn't work anywhere else.
The web gallery function in Bridge would be ideal to use for this gallery, but it just doesn't work and I have no idea how to fix it. Any help or insights on what's wrong would be greatly appreciated.
Thanks,
Kent Bingham

Missing DOCTYPE declaration for starters:
http://www.w3schools.com/tags/tag_doctype.asp
without that the browsers do not know which set of rules to apply when displaying the page. Correct that then...
Validate the page here:
http://validator.w3.org/
Then come back here and we will look for problems. But very hard to correct anything until you get the foundation right.
Best of luck,
Adninjastrator

Cache doesn't work with Apace-WebLogic bridge

Hi.We noticed a problem with the download performance of our Java applet with Netscape. It's a tiny applet of 300K that takes only 2 seconds to load using IE, because it is already cached, and with Netscape it is always reloaded and the cache doesn't work.The applet is located on a WebLogic server, and we access it through an Apache server that redirects all requests to the WebLogic server. We noticed that when we access the WebLogic server directly, Netscape cache works fine. However when using the bridge, Netscape ignores the cache, while in IE the cache still works.The Apache server is installed on RedHat Linux 7.1. The bridge is a WebLogic module developed by BEA (the makers of WebLogic) that extends the Apache functionality and enables it to act as a proxy and leave the client (browser) totally unaware of the redirection. The requests are sent to the Apache server and the responses appear to be coming back from it as well.We need to understand why the cache doesn't work when using the bridge. Can you please tell us if you know of this problem or not, and if not -- point us in some direction to check for the problem.Thanks.

You have to modify the password manually in OEM's target.xml.

Lens correction doesn't work in CS5 Bridge

Lens Correction in Bridge isn't working properly for me.
I ran the Lens Correction tool in Bridge and selected "Match best profile" from the profile section.
The script ran and saved the new files in the proper folder, but didn't produce any lens correction results. I double-checked this by creating a highly distorted lens profile and running the script with that, but it didn't produce any results either. It seems the Lens Correction tool, when accessed through Bridge, isn't working. It does, however, work great when used in Photoshop... just not in Bridge where you can apply it to multiple files.
Has anyone had any experience with this? Judging from the ancient dialog screen, I'd bet that this feature doesn't get used much.

Has anyone had any experience with this? Judging from the ancient dialog screen, I'd bet that this feature doesn't get used much.
Your last remark about popular usage seems to be spot on, never even tried it myself. It seems one of the many needless and bad working options in Bridge that should have been dealt with long time ago but as we all know by now Bridge is neglected by Adobe bean counters and we still are waiting for the miracle...
Tried your route in Bridge CC (selecting a few files in Bridge / menu tools / Photoshop / Lens Correction) and run the scripts.
You are right, the files are saved in a separate 'results' folder with the same filename but nothing has changed other then instead having a locked background layer now the dreadful 'layer 0' assigned (dreadful because I have lots of actions working on the layer called 'background' and they refuse to work on 'layer 0', I have to built in a flatten layer command to change it again to background, but this is slightly Off Topic…)
And indeed, the same files running in PS lens correction filter do have the correct result.
You can't use raw or DNG directly in the Bridge script because the result can only be saved as jpg, png, PSD and Tiff.
Meanwhile you could do the obvious and choose from two options:
- follow the ACR / Raw -DNG route (preferred because at the start of the process) where you can select the raw files in filmstrip mode and with select all choose lens correction in ACR then hit OK or save or open).
- or in case of already converted or saved files create an action (which is nothing more then a recorded script but then very easy) yourself.
Just open 1 file in PS, then create a new action in the action panel with a proper name. It starts recording and will follow your steps. Apply lens correction with the wanted settings, then hit OK, use flatten layer to return to Background instead of Layer 0, hit save as (choose a proper location because all files will be saved here when running the action) and be sure to not touch or change the file name otherwise each new file will overwrite the previous with the same recorded file name, if you leave it untouched it saves the existing file name in a new location. hit close file and then stop the recording of the action.
Select a bunch of files in Bridge, choose menu tools / PS / Batch and select the action you want to apply and hit OK. In case of 100 + files go for coffee, otherwise watch the magic happen…

Automated batch doesn't work in photoshop & from Bridge

Hi all,
Automated batch from Bridge tools>photoshop>batch Photoshop cs5 stops working. Automated batch also doesn't work in photoshop. Automated actions work in Photoshop. All other Photoshop process work from Bridge. I use a PC with windows. This happens even with files I was previously able to do an automated batch with Photoshop. It doesn't matter what the file extension is. This has only recently begun happening for no apparent reason.

First, given what you've written, it's important to ask: 48 x 48 what? Details matter. 48 x 48 pixels? Inches?
Beyond that, yes, I believe the Image Size dialog interacts with us a little differently than it used to.
Whether it's a positive or negative design change I can't say. They're trying to pack a lot of functionality in there, and it might take a little getting used to... It does seem deterministic:
If you want to keep the physical print size the same and increase the pixel density - i.e., upsample the image - you would have to choose physical dimensions. Try this:
1. Change the units to inches.
2. Change the ppi value and press OK. This resamples the image.
On the other hand, if you want to keep the pixel count the same, but just change the ppi value so that it matches a particular kind of display, how would you do it? Try this:
1. Change the units to pixels.
2. Change the ppi value and press OK. This changes the metadata.
Are you trying to assume what leaving the units set to percent means? To me it says "xx % of the pixel count".
-Noel

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

michaelvee wrote:
As an overworked professional, I simply have to consider the very viable options out there. Never thought I'd be seriously considering a Cubase product.
It's a Steinberg product, not a Cubase product.. in case you haven't been paying attention Steinberg developed the virtual instrument for use in it's programs way back in Cubase 3.55.. the plethora of virtual instruments and the advent of low-latency drivers can be directly traced to Steinberg/Cubase development.. Logic also borrowed Cubase's arrange page format back in the 1980's. Cubase has borrowed from Logic to be sure but Steinberg has long been an innovator for many of the things we take for granted today. It was Logic/Emagic who licensed the VST technology and ASIO low latency format to use in Logic 4.xx. It was Apple who adapted VST to it's own AU format. Also, Cubase and Nuendo have undergone a lot more innovation over the past three years, Yamaha has been good as a parent company. Cubase is not Nuendo's little brother by the way, they are very close, same exact audio engine, same robustness, they can exchange files, the only difference being Cubase doesn't have some of the high end post features that Nuendo has. I use both Cubase and Logic and occasionally Nuendo at the University here.. I know both programs fairly well, believe me, both Cubase 6 and 7 can hold their own with any DAW out there, they just don't come with a bunch of ready made loops and preset instruments.
LogicX will never be able to use 32-bit instruments without a third party solution, nor will it ever include the Bridge. At least according to the people I know.

Lastest camera raw update doesn't work. Bridge no longer recognises my raw files.

I'm using CS 6 and lastest camera raw update doesn't work. Bridge no longer recognises my raw files.

Let's see if I can simplify it for you...are you using CS6 (yes, it seems), are you having ACR problems (yess it seems). So, do you want to fix your issues? Then read this (pay close attention to the details)...
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
It pretty much says you need to download a different version of ACR and install it (if it's not too diffucult for you to understand) to get ACR & Bridge to work properly...or not. Your choice...

Bridge doesn't work

Similar Messages

Maybe you are looking for