Bridge drops while connected to Playbook and Z10.

Hi,
I have a Z10 10.1 software with Telus and the updated Playbook software.
when im bridged to the playbook the bridge connection drops once and a while. There are no other bluetooth connections around when I am in my home that could be interferring...
Are there any issues with the bridge connection?

Hi mikeymike123,
Could you please provide as much detail as possible on this issue so we can better assist?
What version of BlackBerry Bridge do you have installed?
Do you receive any error or warning message when the connection drops?
Are you accessing any specific features when this happens?
Are you always in the same environment when you have this issue?
What steps do you need to perform to restore your connection?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

BT Homehub 2.0 Dropping all connections. Wired and...

Hi All
I recently joined BT a couple of months ago after being with Virgin. I was very happy with the speeds up the service to begin. Then the homehub started dropping all connections, both wireless and wired. This would happen about once or twice per day and the only way to get the connections back would be to power off the homehub. The lights remained all blue and there was no apparently connection issues after ringing through to support. After a few calls to BT they agreed that the router was faulty.
I then received a replacement hub, and after connecting it, I found that it was even worse. It lost all connections about every 20 minutes to the point where I had to hook up the one I was about to return to BT.
I have read similar threads, but nothing has been able to solve my problem. I have checked the channels and tried changing them, although I was the only router on a particular channel to begin with.
I am about to ring up BT tomorrow to request yet another homehub. Before I do I was hoping that someone would be able to help. In the entire time I was with Virgin for 2 years, I think I lost connection maybe 2 or 3 times over 2 years with their supplied netgear router. This is why I really feel the fault is with the router and not the line. I am not against just buying a new router, so any suggestions that people have used with BT would also help.
See below for my router ADSL settings and also speed test results.
Thanks for any help you can provide.
Download speedachieved during the test was - 10128 Kbps
For your connection, the acceptable range of speedsis 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :13316 Kbps(DOWN-STREAM), 1188 Kbps(UP-STREAM)
IP Profile for your line is - 10000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 4.7:18.71:76.6 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
Upload speed achieved during the test was - 977 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1188 Kbps
Router Settings
Connection information
Line state
Connected
Connection time
0 days, 1:10:20
Downstream
13,316 Kbps
Upstream
1,188 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
4.7 dB / 5.6 dB
Line attenuation (Down/Up)
27.5 dB / 13.5 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm

Here you go. Thank you
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
6.1 dB / 5.8 dB
Line attenuation (Down/Up)
27.5 dB / 13.5 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm
Loss of Framing (Local)
11
Loss of Signal (Local)
1
Loss of Power (Local)
0
FEC Errors (Down/Up)
223864 / 0
CRC Errors (Down/Up)
6 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
15
I should also mention that I have already tried changing the channel using inssider to one not currently in use without success.
Cheers

Trying to download update to CoPilot Live and CoPilot GPS with maps. files sizes are large and taking hours to download on wireless connection. How can I download App updates and new maps while connected to PC and Itunes through hard wire internet link?

Trying to download update to CoPilot Live and CoPilot GPS with maps. Files sizes are large and taking hours to download on wireless connection. How can I download updates and new maps while connected to PC and Itunes through hard wire internet link?

I'm on my iPad, so I don't know if this is the page with an actual download. I don't see a button, but assume that is because I am on an iPad. It is in the DL section of Apple downloads.
http://support.apple.com/kb/DL1708

Cellular data being used while connected to WIFI and not in standby

I am connected to my home WIFI on my iphone 4, but while my router is not connected to internet (so I should not have internet on my iphone), I noticed I am still receiving push notifications,
I finally read here that while on standby, wifi is turned off and 3G is used, ok.
now here is the problem, looking at the General>Usage>Cellular Usage, even if I am not on standby and I am using the phone, I have data usage (sent and recieved), I reopen the Celluar Usage and see the numbers are constantly increasing, and more strange is some (not all) of the push notification do come through (eg in my case for an app called FavFriends),
another friend of mine has a simillar problem on iphone 4s.
what is this celluar usage in the background?????

from what I knew so far, iphone should not use the 3G if wifi is connected, eventhough there is no internet on that wifi,
so in my case, if iphone is actually detecting no internet and switching to 3G, I should have internet on all apps (safari, etc..) which i dont, just data usage increasing with no internet in any apps (that is a 3G usage which is limited more than even when on standby),
and if it is not supposed to switch, it brings another question, that if 3G is used when wifi connected (with no internet), are there any background 3G usage (push notifications, etc), while wifi has internet and it is supposed to utilize the wifi internet?
so basically, I was under the assumption that 3G would not be used unless wifi is disconnected, regardless of internet access, and I dont find anything that says otherwise.

Desktops dropping wired connection to e4200 and other Linksys routers

Hi,
On Friday, I lost all Internet connnecitivity on my Linksys e3000. After determining that my cable modem was connected and working correctly, I pulled the e3000 and put my old wrv54g router in place. Wireless worked, but all wired connections showed link but no other apparent connectivity. Neither of my desktops could get a DHCP lease.
At that point, I purchased and manually installed a new e4200 router. All worked fine. Both laptops connected via wireless and both desktops via my house LAN. Until this morning (Monday). Wireless is working just fine, but both wired computers show 100 Mbs connections on an unknown network with no DHCP. Checking status shows packets going out, but nothing coming in. Checking LAN status on the router shows that both ports are connected, but it does not appear to receive anything from either desktop. All was fine last night. Oh, the router is on 1.0.03 firmware.
I have tried about everything I can think of. Configurations both on the router and the desktops (one Windows XP, 64 bit and one Windows 7) and all seems fine. I have disabled and reenabled the network connectors, rebooted both the router and the computers, etc. Nothing seems to work.
I am out of ideas and desparate. Does anyone have any idesa.
Thanks,
Mitch

I actually solved the problem, after a long day of trying everything I could think of, and the issue was not the router. I did a chat session with a Linksys support rep and we figured out that the router was bad. I replaced it with a new one and still had the same problem.
Long story short, I have a weather unit that connects, via wire, to the Internet to retrieve weather forecasts. It is hooked up through a ethernet switch, along with my desktop. For whatever reason, it went flakey and took down everything that was on a wire, including my wife's desktop in another room, which was connected to the router through a hub. As soon as I pulled the power on the weather device, everything started working. When I put power back, everything still worked.
Not sure why, or how this happened, but I will take success any way I can get it.
In regards to the e3000 problem, when I was returing the original e4200 for replacement at Best Buy, the guy there said that they had seen the ethernet switch part of the e3000 units fail before. I had an e3000, which failed last Friday, which was why I purchased the e4200 to replace it. Of course, my e3000 failed completely, including wireless.
Mitch

MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.

I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot discover the TC it is connected to.
I tried connecting after hard-reset (poke/power on), it would see the TM but then hang forever reading the configuration. So I set it up with MB Pro and MB White and both are now working fine with TC/TM. Then I tried MB Air and it failed.
The TC is connected via ethernet to Sagem router (bridged mode) which supplies WAN and DHCP, it has its own WiFi as well.

And by the way, Hi Everyone, how rude of me not to greet you in the post.
Thanks for any help!

Date Format issue while Connecting to Oracle8i and Oracle10g

Hi All,
While playing around with JDBC drivers, I came across this weird issue. I have a Local machine with Japanese Locale and I have 2 Database Servers that too with Japanese Locales and Oracle 8i and Oracle 10g each. Now, I connect to these database using JDBC drivers for 8i and perform "select sysdate from dual". Then, m getting dates with 2 different format. While 8i being returning Date with 'DD-MON-RRRR' format, 10g returns date with 'DD-MM_RR' format.
Initially I thought it might be because of some VM Locale thing but when I connected to 10g DB from 8i Oracle client, this behaviour did not changed. Which mean in this case also the date format returned ny the query was different.
Guys F1! F1! (Help! Help!) Appreciate your help to understand this process. Links and suggestions welcome... :)

I guess u did not read the whole content. I mentioned this but the difference in behaviour with respect to JDBC drivers made me post this in Java forum.
As I mentioned, it has something to do with the jdbc driver or oracle server itself. Agreed, but what that "something little to do" is the maiin question.
I mentioned that I want to understand this process about how JDBC driver works with Client VM specific Locale settings while interacting with Oracle Database.
Don't you think it could be interesting to know, what it is which brings this difference in results. Its all about clarifying the small bits & pieces which stays unanswered if one overlooks. Its own perception, I felt like asking question, no offense right!

Call drop while talking long distance and strange number in log

Talking to relative in NY, call dropped with no dial tone after that. Unplugged all phones, checked the connection box. Dial tone came back after about 15 minutes. Checking the digital phone log revealed that {edited for privacy}was listed as being called 7 times during the time of no dial tone. Looking at the log again showed that {edited for privacy} was called eight times yesterday. About a call a minute to this number. Have no idea what this number is. It seems that everytime the calls are dropped, this is the number in the log. What is happening?

The alarm system checks out OK, strange number was just the system making the regular 28 day call. Calls are still dropping, mostly after talking for a long time. Can call the number back immediately and get connected. Dial tone is not missing for these latest incidents, althought it was missing once in the past. Also have an answering machine that clicks at random as if someone is picking up a phone. Answering machine is set to 4 rings and digial voice answering is set to 6 rings. The whole system worked fine when installed, now is a constant problem. Going to start disconnecting things and probably run a wire from the box directly to one phone. Is there a tracer that can be hooked up to monitor the line?

Playbook and Z10...

When will be have full integration??? I can not believe this is happening.... I buy the newest Blackberry and find out is not working with playbook, this a major error that needs to be fixed ASAP, not in weeks.

We only expect security fixes from now on, no OS development is likely, so no bridge fix.

Airport quits but still shows all bars while connected to DSL and internet

When I hit a link on the net, using safari, or mail, I often get a message..Safari cant open the page because your computer isn't connected to the internet. Airport is showing all the bars. The only way I can get it working again is to disconnect using internet connect ant then reconnect. Sometimes that doesn't even work. Sometimes I try new location or diagnostics. I spend more time trying to get back on the net. Am frustrated.

Hi MrcB, and a warm welcome to the forums!
In Network>TCP/IP tab, what does it list for IP & Server IP?
Do you have any extra USB things plugged in?
Are you running from Battery or A/C?
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
PS. if these things don't help... It's quite acceptable to start a new topic of your own, feel free to start a new topic to attract more helpers to your particular situation, here's a link if as is often the case, it's hard to find out where to do it...
http://discussions.apple.com/post!default.jspa?forumID=755

Song preview stalls while connecting... and the workaround

Starting a few days ago, I've been unable to preview any songs on the iTunes Store. I tried various artists and genres, but it was all the same. However, there was no problem previewing TV shows. When I used Process Explorer to monitor my system resources, I found that iTunes was using over 90% CPU cycles whenever I try to preview a song!
Now, here's the workaround. Double-click a song on the store to preview. When you see the "Connecting..." bar, click on the blue field at the top of the bar and hold for about 3 seconds. When you release it, then the preview works! Weird, huh?
Apple, if you're reading this, please fix this bug.
Message was edited by: Kimikaze

You are RIGHT ON... I just upgraded and had this issue. 10min googling and I found this post. This works perfectly for me. D#mn! I was concerned this was some goofy bug with my system, but it does appear to be bug in iTunes.
Kimikaze - great find.

My ipod nano 6th generation does not start on pressing the sleep/pause button or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

i have an ipod nano 6th generation .version 1.2 yesterday i restored it on i tunes using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok after starting by connecting to power and then disconnecting the cord.
what would be the reason and what to do?>

Call Apple Care as you are still under warranty.

IPod plays only while connected to computer

I handed my Ipod (10GB dock connector) to a clumsy giant the other night and he dropped it. I immediately got the dreaded "!-folder icon." I tried resetting; that's when the ipod started clicking, restarting and restarting ad infinitum, and then... finally--the !-folder icon again. So I tried restoring using the software on my hard drive. At first, the ipod didn't appear on the desktop or in iTunes when I connected using Firewire, so there wasn't any apparent way to restore. After disconnecting from the computer and several resets, I decided to put the ipod in drive mode. I reconnected and the ipod icon showed up on the desktop. I tried restoring but it didn't work. I used the Apple Disk Utility on my Powerbook to verify the drive and it said it was OK. Unable to do anything, else, I used the ERASE feature in Disk Utility, reformatting to Mac OS Extended as prescribed (I did not create any partitions). I was then able to do an ipod software restore, and finally managed to put some mp3's on the gadget. As soon as I disconnected I got the !-Folder again and the infernal clicking. I reconnected, and a pop-up window told me that I needed to update the ipod to the latest version. I did. I then opened iTunes: the ipod played as long as it was connected to the computer. I ejected the ipod and tried to operate it, but still the !-folder and clicking. Tried another reset (Menu-Play/Pause-6 seconds), but still the dreaded folder and more clicking. Connected to the computer again and pop-up window tells me I need to update ipod to latest software version--AGAIN!!! I update again but updater never indicated completion of update. Disconnect. Reconnect. Same pop-up!!! I bypass pop-up and open iTunes. Songs still play. But when I disconnect I only get the !-folder. And everytime I reconnect, I am told to update. I have updated several times. I have even downloaded the most recent (Sept 2005) Ipod updater and updated. And then I updated to iTunes 5 when I discovered that while I was updating...and updating...,Apple had also updated iTunes. After all this, the ipod only works while connected to Powerbook, and Disk Utility still says the disk is OK. But I still am asked to update every time I connect, and the ipod refuses to work solo. It just clicks at me.
Can anyone help?

It sounds like a battery issue to me. When you connect it to the PC it draws power from the computer and thus it is able to function. Apparently it doesn't have enough of its own juice anymore. You probably just need a new battery.

Ip inspect problem, dropping important connections on 887VAMG router

Hi All.
I've got a problem on 887VAMG router. It drops important connections. As customer wants to have a firewall I created ACL and ip inspect rules ,but the router drops their connections to cloud and some websites are not opening. So I removed ACL and most ip inspect rules just to test if it effects that. And left only ip inspect http urlfilter. But still they have those problems, so I'm really stuck how to configure that firewall.
I'll be highly appretiated for any help.
The below some dropping connection review:
%FW-6-DROP_PKT: Dropping tcp session due to RST inside current window with ip ident 13968 tcpflags 0x5014 seq.no 1629693318 ack 1687676045
000049: Mar 6 11:49:21.324: %FW-6-DROP_PKT: Dropping http session <ip>:1766 69.171.242.12:80 with ip ident 26247 tcpflags 0x5018 seq.no 264144210 ack 642133125
000050: Mar 6 11:50:00.774: %FW-6-DROP_PKT: Dropping http session <ip>:4708 69.171.242.12:80 with ip ident 2425 tcpflags 0x5018 seq.no 3819869211 ack 1862176018
000051: Mar 6 11:50:52.515: %FW-6-DROP_PKT: Dropping http session <ip>:2599 173.194.34.90:80 due to RST inside current window with ip ident 22909 tcpflags 0x5014 seq.no 899975979 ack 92642430
000052: Mar 6 11:51:24.013: %FW-6-DROP_PKT: Dropping http session <ip>:4765 194.106.151.77:80 due to RST inside current window with ip ident 4118 tcpflags 0x5014 seq.no 3161679649 ack 1450263460
068974: Mar 6 05:10:14.676: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:1530 due to RST inside current window with ip ident 8954 tcpflags 0x5014 seq.no 2056370527 ack 2999433041
068975: Mar 6 05:35:48.385: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:1882 due to Stray Segment with ip ident 27148 tcpflags 0x5010 seq.no 939083425 ack 724203821
068976: Mar 6 05:36:21.734: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:4919 due to Stray Segment with ip ident 2945 tcpflags 0x5010 seq.no 704890853 ack 370246242
068977: Mar 6 06:29:14.628: %FW-6-DROP_PKT: Dropping http session <ip>:1214 66.101.6.51:80 due to Invalid Segment with ip ident 26797 tcpflags 0x7002 seq.no 2896034509 ack 0
068978: Mar 6 06:32:51.923: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:1653 due to SYN inside current window
Dropping http session due to RST inside current window with ip.
Dropping http session due to Stray Segment with ip.
These 2 are most of all. Why do they drop sessions? What do they mean?
Thanks.

I removed a firewall, ip inspecting and ACLs, but there is some delays for web browsing and slow internet connection.This model of router C887VAMG was introduced just in January, so I'm wonder if there are some bugs in firmware.
Why is this router is not capable to do inspection and firewalling? It shouldn't really drop the performance so high.

HT1349 My iphone wont sync or update when connected to itunes and also my iphone stopped mms messaging these problems seem to have come out of no where if anyone can help would be appreciated?

My iphone wont sync or perform updates while connected to itunes and also my phone suddenly stopped mms messaging if anyone can help would be great

Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?

Bridge drops while connected to Playbook and Z10.

Similar Messages

Maybe you are looking for