Bridge E-mail Error

When I try to access the bridge e-mail I get an error telling me that the bridge is lock, I do not know how to lock the bridge so much less how to unlock it, the weird part is everything else in the bridge works.
I tried to erasing the bluetooth on both Playbook and the Bold 9900, I then tried to re-install the bridge, and every time I get the same message, and now I down to one more entry of the password and I loose both the Playbook and the Bold 9900, because they will both be wiped I tried too many time the password and it does not work
Using the Playbook and the Z10 and the Z30 and loving them
Martin

Hello rat-7,
Sorry to hear about your issue.
Try following the steps listed in the workaround section in the below article to see if that resolves your issue.
"Unable to connect BlackBerry Bridge with BlackBerry smartphone" error appears when attempting to pa...
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Adobe Bridge: Bridge.exe Application Error

When startup Adobe Bridge: Receive windows error: The Exception unknown software exception (0x000000d) occurured in the application at location 0x006d783e.
Adobe Bridge part off Adobe Photoshop CS4.
An re-install of Photoshop CS4/Bridge even same problem.
Anybody an idea?

Hi Curt,
Thank for your quick answer.
I'm sorry actualy i'm not the user so i have to wait till monday to find out if the solutions works.
I'l let you know?
Regards,
Richard

Adobe Bridge CS 6 error - crash

Hey
I have Adobe Photoshop CS6 elements. It has Adobe Bridge CS6. If I want to run Adobe Bridge receives an error:
Problem signature:
   Problem Event Name:                   APPCRASH
   Application Name:                         Bridge.exe
   Application Version:                      5.0.2.4
   Application Timestamp:                 50d9a019
   Fault Module Name:                      Bridge.exe
   Fault Module Version:                   5.0.2.4
   Module Timestamp error:             50d9a019
   Exception Code:                           c0000005
   Exception Offset:                          000000000036af69
   OS Version:                                 6.1.7601.2.1.0.768.3
   Locale ID:                                     1045
   Additional Information 1:              dca5
   Additional Information 2:              dca5eef3eb4639786ac397e2f866e6e1
   Additional Information 3:              4199
   Additional Information 4:             4199b882f4916698ed37542ab754498a
Read our online privacy statement:
   http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0415
If privacy statement online is not available,
Read our privacy statement offline:
   C: \ Windows \ system32 \ en-US \ erofflps.txt
Reinstalling Adobe Photoshop nothing has changed. Adobe updates are installed.
The operating system is Windows 7 64-bit.

Hello, wck.org. As it happens, there's no such thing as "Adobe Photoshop CS6 Elements". Do you have Photoshop CS6? I would suggest that you would do better posting in the Bridge forum, since PSE isn't based on CS6 and doesn't include Bridge, so there aren't many people here who can help with problems with Bridge CS6:
http://forums.adobe.com/community/bridge

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

File To Mail - Error in sender CC

Hi All,
I am trying out a File to mail scenario following the Blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
I am getting the following error in the File Sender Comm Channel :
Mail: error occurred: com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: no sender address specified
I could also see the payload is empty in the Receiver Mail CC
Now can anybody help getting me the mail ...
Thanks in advance

Hi Bhavesh,
I get a checkered flag in Moni ,
But the response has only SOAP header and Body with out payload , I Mail package is checked and base64 is selected ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 1DC20B0043D611DBC937000D60D4EDB5</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO3___0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Mail/30 GK_File2Mail_IM</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:05Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>

File to Mail error

Hi,
I am doing file to mail scenario. I got an error
"failed to send mail: java.io.IOException: invalid content type for SOAP:
TEXT/HTML"..
How to solve.
regards,
Ansar.

Hi Bhavesh,
I done like that but still it is coming...
This is the process of Communication channel
2006-12-29 11:42:46 Success Mail: Receiver adapter entered with qos ExactlyOnce
2006-12-29 11:42:46 Success Mail: calling the adpter for processing
2006-12-29 11:42:46 Success Mail: call failed
2006-12-29 11:42:46 Success Mail: sending a delivery error ack ...
2006-12-29 11:42:46 Success Mail: sent a delivery error ack
2006-12-29 11:42:46 Error Mail: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
2006-12-29 11:42:46 Error Exception caught by adapter framework: Failed to call the endpoint
2006-12-29 11:42:46 Error Delivery of the message to the application using connection AFW failed, due to: Failed to call the endpoint.
2006-12-29 11:42:46 Success The message status set to WAIT.
2006-12-29 11:42:46 Success The asynchronous message was successfully scheduled to be delivered at Fri Dec 29 11:47:46 GMT+05:30 2006.
regards,
Ansar.

Workflow mailer error

Hi ,
I was getting the workflow mailer error from R12. I tried to start,but failed......after that I got a confirmation from my client that somebody changed a table, then I checked again and found Workflow mailer working fine....I didnt get what happened on this...
friends, If you have any idea on this, please share

Pl post details of OS, database and EBS versions. Has this mailer worked before ? If so, what changes has been made recently ? Pl also see these MOS Docs
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer          (Doc ID 463354.1)
Unable To Start Workflow Notification Mailer          (Doc ID 418329.1)
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues          (Doc ID 753845.1)
Workflow Mailer Will Not Start Stays In Starting Status          (Doc ID 837893.1)
Unable To Connect To The Mail Account. Check The Host, User Name And Password          (Doc ID 1123684.1)
HTH
Srini

Undeliverable mail - error message

When I try to send mail, I get an Undeliverable mail error message/response. I don't know if it makes a difference if I select the me.com or mac.com as my outgoing server. I also work at a university, but I don't think that should be a problem since this just surfaced today. I've posted some additional technical details below. Has anyone else experienced this problem recently?
Error message details:
SMTP module(domain mac.com) reports:
host smtp-mx2.mac.com says:
550 5.1.1 unknown or illegal alias
Reporting-MTA: dns; regor.[myuniversity].edu

First of all test the other mail host. Do nslookup on the mx record for the domain. Maybe also check it from somewhere else on the internet to make sure your dns server doesnt still have an old entry cached. Once you know dns is going to the right server, try to telnet to port 25 on that server to see if you can connect to the other mail server and get a header back. If you want you could go a step further and send a message via command line but not usually necessary.
If that server seems fine, look at your own mail server. Check dns, delivery to other addresses etc..

Notification Mailer Error

Hi
We are upgrading our system to linux. Problem we are getting is whenever we clone our system, notification mailer is giving error. When I submit the timesheet, I am getting the following error in the mail
Error
Your session is no longer valid or your logon information could not be reestablished from your session.
Any faced a similar issue. Do i need to do something extra at the time of cloning for notification mailer

I have gone through all the finishing tasks of the cloning and updated all the workflow related tables and restarted services but somehow a dynamic xml is not generated. That is the reason why we get the error. Mailer, CM are all fine. The error is still showing up in the notifications sent.
Your session is no longer valid or your logon information could not be reestablished from your session.

Another newbie WIN Mail Errors

Sorry if this is not the correct board - it is my first visit.
For weeks now, I've been pulling out my hair rotating from Verizon to HP to msn to windows tech support over this:
In any website, clicking their 'Contact Us' button or forwarding anything form there, I always got a windows mail popup "Error 0x800CCCf0; Windows could not send . After many calls and re-settings, an HP tech told me today to just use Windows Live instead. This brings up a new error:
"Unable to send or receive messages for the Msn (z7udumm) (1) account. There was an unexpected error and Windows Live Mail can't sync the messages in your Hotmail account. To sync your messages, in Windows Live Mail, remove your Hotmail account and then add it again. To view messages in your Hotmail account, go to http://hotmail.live.com on the Web.
Server Error: 4102
Server Response: Object with Id caaa4357-f436-49ec-91df-cdaedff6117f appears in more than one command
Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx'
Windows Live Mail Error ID: 0x8DE00001"
From where do I remove/ readd the Hotmail account? What does all of this gobbledigook mean? Can anyone help? Thank you very much

Well, it's pretty much designed and meant to be a single-user machine, at least so far. There is only one Contacts app which, of course, feeds and drives everything else.
You can easily import your whole Address Book into hers and then sync that one to the iPad. That might result in some duplication but that's not too serious a problem, I hope. Arrangement details, Groups and etc., will have to be negotiated also.
And as you suspected no, it's not tethering. Think of them as being linked, via iTunes, for syncing purposes.

Imap smtp - window live mail errore 0x800CCC69 - same settings in thunderbird everything is ok

exchange 2013 external client send in smtp
thunderbird can send email
Windows live mail gives these error
Server Response: 550 5.7.1 Client does not have permissions to send as this sender
on exchange smtp log i found
2014-07-15T13:52:18.456Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,39,*.*.*.*:587,*.*.*.*:35136,*,mydomain/postmaster33,authenticated
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,40,*.*.*.*:587,*.*.*.*:35136,*,,Proxy session was successfully set up. Session mydomain/postmaster33 will now be proxied
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,41,*.*.*.*:587,*.*.*.*:35136,>,235 2.7.0 Authentication successful,
2014-07-15T13:52:18.931Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,42,*.*.*.*:587*.*.*.*:335136,-,,Remote(SocketError)
any idea?

Hi, the iussue is on sending mail. From thunderbird imap and SMTP everything is ok from windows live mail i receive these error :
An unknown error has occurred.
Subject 'ciaoo'
Server Error: 550
Server Response: 550 5.7.1 Client does not have permissions to send as this sender
Server: 'mail.mydomain.com'
Windows Live Mail Error ID: 0x800CCC69
Protocol: SMTP
Port: 587
Secure(SSL): Yes
as u requested the permission of my connector:
[PS] C:\Windows\system32>Get-ADPermission "Client Frontend CAS" -User "authenticated users" | ft User, ExtendedRights
User ExtendedRights
NT AUTHORITY\Authenticated Users {ms-Exch-SMTP-Accept-Any-Recipient}
NT AUTHORITY\Authenticated Users {ms-Exch-Accept-Headers-Routing}
NT AUTHORITY\Authenticated Users {ms-Exch-Bypass-Anti-Spam}
NT AUTHORITY\Authenticated Users {ms-Exch-SMTP-Submit}
NT AUTHORITY\Authenticated Users {ms-Exch-SMTP-Accept-Authoritative-Domain-Sender}
and evidence of the log when windows mail send a message
2014-07-15T13:52:18.456Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,39,*.*.*.*:587,*.*.*.*:35136,*,mydomain/postmaster33,authenticated
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,40,*.*.*.*:587,*.*.*.*:35136,*,,Proxy session was successfully set up. Session mydomain/postmaster33 will now be proxied
2014-07-15T13:52:18.565Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,41,*.*.*.*:587,*.*.*.*:35136,>,235 2.7.0 Authentication successful,
2014-07-15T13:52:18.931Z,CAS\Client Frontend CAS,08D1448A8AB29CBF,42,*.*.*.*:587*.*.*.*:335136,-,,Remote(SocketError)

Remote Mail Error

Hi there,
We are getting error messages in SOST and some of the emails are not going out. The error messages is "Cannot process message, no route from USERNAME to SID:500:USERNAME". This client on that SID is used for CUA purposes and the connection is present in SM59 and there is no authorization and connection problem as I tested it there.
Dont know how to resolve this issue. Any hints. The communication method is set to remote mail in SU01 and in SCOT I can see the errors under RML.
Any ideas how to resolve it.
Thanks

Thanks everybody for the responses. I think I have to explain it more in detail here. In SRM we are using procurement. All the emails go out find to all suppliers. On one day we noticed failures just for one person and it gets repeated whenever the SMTP job runs. That user is set to RML in SU01 that is remote mail. The error messages in SOST is that same as I stated in my problem for the first time. I deleted all of them and its still keeps on throwing the cannot send email message whenever the SMTP job runs. The strange thing is that whenever I delete the message the same number of message appears with the status of waiting. I left it there for a day and then deleted all of them and then it vanished. I dont know how this thing works but the problem is resolved. All the settings/configuration mentioned by you guys are done correctly and I verified it.
At this point I like to understand how remote mail is different from email in SU01. Why the same number of messages keep on coming up as soon as I deleted the failed message in SOST.
Thanks again everybody for all your help.
Shafquat
Re: Remote Mail Error
Posted: Jun 1, 2009 9:40 AM    in response to: Shafquat Khan           Reply
1) Have u actiaved parameter icm/plugin_<*> in instance profile
2) Set Default domain
3) Schedluled send Job
4) Activated SMTP in SMICM
Anindya Bose
Posts: 10
Registered: 6/1/09
Forum Points: 0
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
   Re: Remote Mail Error
Posted: Jun 1, 2009 11:18 AM    in response to: Anish John           Reply
1. Can you please check wheather SAPCOnnect ( TCode SICF) is activated for your system.
2. Check Code page in SCOT and the name of the mail host.
3. Go to TCode SCOT, Check "Internet" in "Supported address type" click on "Set" and in the "Address Area" put "*"
4. Please also check whether the connection between your SAP server and the mail host( SMTP host) working.
5. Check whether SAPConnect job has been scheduled
If you are still gettting problem please paste Log from SOST.
Prasanna K
Posts: 37
Registered: 12/1/08
Forum Points: 20
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
   Re: Remote Mail Error
Posted: Jun 1, 2009 3:24 PM    in response to: Anindya Bose           Reply
Hi,
Does the user has a email id mentioned in su01.
Thanks,Prasanna
Edited by: Prasanna K on Jun 1, 2009 3:29 PM

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

Yahoo Mail - Unable to delete and Cannot Get Mail errors

A few days ago my Yahoo mail started acting up.
I keep on getting "Unable to move message" errors when trying to delete mail. The proper folder is selected as the trash folder under settings. Sometimes message do delete however, but mostly they do not.
I am also getting periodic Cannot Get Mail errors, but mostly I am able to receive mail.
This leads me to believe that this might be a yahoo issue (I opened a support request with them also) I have deleted the account from my iPhone and recreated it several times, but the problem persist.
Anybody else having similar issues with Yahoo mail ?
Thanks
PS I have Yahoo Mail Plus with POP access

I opened a ticket with Yahoo, a day later they came back and advised that they made some changes to my account, but it still does not work.
There is something strange about how Apple and Yahoo communicates, I think there is some exchange in the middle that is causing the problems. The reason for me saying this is the error I got periodically stating that "Cannot Get Mail, The user name or password for imap.apple.mail.yahoo.com is incorrect". Why imap.APPLE.mail.yahoo.com ???
I did however setup a "Other" mail type account using the POP and SMTP settings from Yahoo and it works like a charm now, no more problems and I can now even use a different reply to e-mail address. Only issue might be that you no longer have the Yahoo side custom mail folders on the iPhone, but this is no big deal for me.
For the incoming server I used pop.mail.yahoo.com with my Yahoo username and password (username without @yahoo.com)
For outgoing, SMTP, Hostname I used smtp.mail.yahoo.com with my Yahoo username and password (username without @yahoo.com), SSL = ON, authentication = Password and server port 465
Under advanced settings for outgoing mail server, Use SSL = ON , authentication = Password and server port 995.
I am not claiming that I understand all of the above, but it works. Hopefully this may point you in the right direction.

Bridge E-mail Error

Similar Messages

Maybe you are looking for