Bridge exe. Bad Image, Please help!

My bridge program will not open. It had been working in the past, but now I get the message "Application or DLL:\Program FilesAdobe\Adobe Bridge CS4\libaray8n28.dll is not valid windows image.  Please check against your install diskette."  Do I need to uninstall and reinstall CS4? all the disks? what do I need to do? Any help is very much appreciated.  Thank you, Jan

This is an old CS2 Tech note but at least it mentions libagli18n28.dll.
http://kb2.adobe.com/cps/328/328349.html
This may also help: http://pcsupport.about.com/od/findbyerrormessage/a/libagli18n28-dll-not-found-missing-erro r.htm
Google is your friend!

Similar Messages

  • Os windows 7 trying to install PhotoKit 2.06 in CS4 getting 'Owl Orphanage: Photoshop.exe - Bad Image. Have tried downloading Photokit from a different source - same problem. How can I get this to install please?

    Has anyone had a problem installing PhotoKit 2.06 in CS4? I keep getting 'Owl Orphanage: Photoshop.exe Bad Image. I have tried installation files from 2 different sources without success. Pixel Genius suggested dropping the unzipped files directly into Plug-ins -  that didn't work. Any suggestions would be appreciated.

    Hi Peter
    I am in touch with Pixel Genius, the plug-in developer, and so far ( this has been going on for 5 days) a solution has not been forthcoming, hence my post. The required files are shown in Windows Explorer but will not load when I fire up CS4. Previously, I ran version 1.2.4 of PhotoKIt without a problem but that was uninstalled to make way for the latest software. Pixel Genius have asked me to open up CS4 Help, System info, and send it to them which I have done. I wait in hope!
    John

  • HT203175 I cannot remove  iTunes Helper .exe- Bad Image warning from my PC when it opens. Can someone help a luddite?

    I receive an error message each time I start my PC. I get the I Tunes Helper.exe- Bad Image message and need to click 5 times before it goes away. I was trying to sync my I Phone with OUtlook and something happened. I am not tech-savvy.

    Many thanks.
    Taken at face value, you're having trouble with an Apple Mobile Device Support file there.
    Let's try something relatively simple first.
    Restart the PC. After you've fought your way through the error messages, go into your Uninstall a program control panel, select "Apple Mobile Device Support", and click "Repair".
    Does the repair install seem to go through okay? If so, restart the PC again. Have the error messages from iTunesHelper.exe stopped?

  • X240 with windows 8.1 has ".exe bad image virus"

    Hi, All,
      my X240 with windows 8.1 had this ".exe bad image" error messages for couple weeks. it keeps showing up when I want to open program or start up the machine.  I googled online, it is said this is a malware or virus. but I have not found an tool to remove it under windows 8.1. do you guys have any idea?
    regards,
    t.z.

    As long as this is a self-diagnosis after your AV was turned off, it might be good if you post on a dedicated security site that can advivse you on running some diagnostic tools and does malware removal if necessary. This forum is not set up for that.
    I suggest posting the required DDS logs on the Malware Removal Forum at SpywareHammer or another site with trained analysts and have a malware removal staff member walk you through the diagnostic logs and a cleanup. They do not use remote access but will advise you step-by-step on what you can do. Please do not attempt to run any additional scans, install software, or use any other tools until an analyst can advise you on the next step. Please use the same username there as you have here. Help is free. There are no advertisements or trackers on SpywareHammer as some of the other security forums have, but you will need to register at SpywareHammer and follow the posting instructions for downloading DDS and posting your logs.
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

  • My HP Pavilion 23 shows sethc.exe Bad Image: system 32 is not designed to run on Windows

    While installing a new fan in my home, the electrician blew a circuit that my HP A-I-O Pavilion 23 computer runs from.  We immediately activated it but my computer would not connect to Windows.  I received the following message:
    ***sethc.exe Bad Image: system 32 is not designed to run on Windows.   WINMM.dll is either not designed to run on Windows or it contains an error.  Try installing theprogram again using the original installation media or contact your system administrator or the software vendor for support.  Error status 0xc.0000005. ***
    My computer came Windows ready; therefore, I have no disk. HELP!!!!! 

    Hello @Senoj617,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your desktop computer shows a Bad Image error message, and I would be happy to assist you in this matter!
    Since the hard drive appears to be damaged from the blown circuit, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Msg: FlashPlayerPlugin_11_7_700_169.exe - Bad Image

    I am running on MS VISTA OS and whenever I now open Firefox I get a variant of this message: "Msg: FlashPlayerPlugin_11_7_700_169.exe - Bad Image"  The description goes on to say:
    C:\Windows\System32\WINSTA.dll is either not designed to run on Windows or it contains an error.  Try Installing the program again using the original media or contact your system administratoror the software vendor for support"
    I have uninstalled and reinstalled Flash.  I have uninstalled and reinstalled Firefox (maintaining my personalizations, i.e.bookmarks...).  The message continues to appear.
    Having tried to Re & Re the obvious appplication I don't know how to further identify and remedy the root cause of this message.  Can anyone give me directions on what to do next?

    Hello
    is not working with sfc/scannow, any suggestion please?!! i have same error, winows 7!!
    please help me!!!
    Thank you

  • DDE Server Window: AcroRd32.exe - Bad Image

    I am receiving the following error message upon opening Adobe Reader:
    DDE Server Window: AcroRd32.exe - Bad Image
    C:\Program Files\Adobe\Reader 9.0\Reader\sqlite.dll is either not designed to run on Windows or it contains an error.  Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
    About my PC:
    Vista SP2 32-bit
    Dell XPS M1530
    IE 9
    Intel Core2Duo T8300 2.4Ghz
    4GB Ram
    If any other information is necessary, please let me know.
    Thanks for your help!
    Joe

    Which particular file are the messages complaining about, rock? (Precise spelling, please.)

  • Dwm.exe-Bad Image

    sir i have problem in my pc one day when i start my pc it show an error message dwm.exe-bad image.with this problem most part of the windows are not responding and the gadgets are not open .
    sir my windows help and support center  are not working yet and it display an message windows not rsponding.
    my internet explorer are not working.it also say window not responding .
    window media player not working.
    with this problem my computer are not showing the window rating which was showing in previously .
    after this problem it not showing the window rating.
    sir there was an aero problem.
    the message say that  try reinstalling the the program to fix the problem and contact uour software support.
    please give me some helpful answer to solve this problem.
    my window activated id is 00426-OEM-8992662-00006.
    Please help me to solve this problem.
    and give me answer to my email id is [email protected]

    Check : http://social.technet.microsoft.com/Forums/windows/en-US/c57dd4b1-e780-45a6-965b-b354d3a5c83d/dwm-error?forum=w7itprogeneral
    Arnav Sharma | Facebook |
    Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
    reading the thread.

  • Itunes.exe bad image error

    I have been trying to get iTunes up and running for months now with no luck what so ever. I'm running on Windows Vista Service Pack 2.
    On opening iTunes I get the error message
    'iTunes.exe - Bad Image
    C:\WINDOWS\system32\softpub.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." '
    After clicking Ok a window appears saying itunes has stopped working and that its trying to find a solution. only button is 'close program'. After closing the program a message appears in the bottom right of the screen saying DEP (Data Execution Protection) has closed itunes to protect my computer.
    As well as this problem I have been unable to perform a windows update. It has been giving various error codes which I tried to fix using the windows Fixit programs and other fixes but both problems persisted.
    I looked thorugh a lot of discussions on different forums online and have tried various things but to no avail. At first I uninstalled iTunes and reinstalled it (I have now done this around twenty times after trying different fixes) and it downloaded and installed perfectly every time but whenever I tried opeing it I would get the bad image error message.
    I have also tried running system file checker (sfc scan) by running command prompt as administrator and it says
    'Beggining system scan. This may take some time.
    There is a system repair pending which requires a reboot to complete. restart windows and run sfc again.'
    But when I restart windows and run sfc again it gives exaclty the same message. I repeated this on numerous occasions after trying other fixes but always gave the same message.
    I also read that replacing the softpub.dll file in the system32 file could be a fix, so I downloaded a new file but when I tried to either rename the old one, move it or do a move and replce with the new file I was told that I couldn't because it needed the administrators permission. I am the only user and was logged in with administrators rights so don't know why it asked and when I tried to give permission it says
    ' Destination Folder Acces Denied
    You need permission to perform this action.'
    It gives the option to retry but this just produces the same message.
    Any help would be massively appreciated.

    Did a restart and there are a few errors and warning listed below,
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    warning 7 - Kernel-Processer-Power
    The speed of processor 1 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
    warning 7 - Kernel-Processer-Power
    The speed of processor 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
    error 7000 - Service Control Manager Event Log Provider
    The Parallel port driver service failed to start due to the following error:
    The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    warning 7044 - Service Control Manager Event Log Provider
    The following service is taking more than 4 minutes to start and may have stopped responding: Avira Real-Time Protection
    Contact your system administrator or service vendor for approximate startup times for this service.
    If you think this service might be slowing system response or logon time, talk to your system administrator about whether the service should be disabled until the problem is identified.
    You may have to restart the computer in safe mode before you can disable the service.
    warning 3004 - windows defender
    Windows Defender Real-Time Protection agent has detected changes. Microsoft recommends you analyze the software that made these changes for potential risks. You can use information about how these programs operate to choose whether to allow them to run or remove them from your computer.  Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow.
    For more information please see the following:
    Not Applicable
               Scan ID: {C9F59478-26AB-4B82-BE2B-2386B5269205}
               User: BILL\Cust
               Name: Unknown
               ID:
               Severity ID:
               Category ID:
               Path Found: driver:RapportIaso;file:c:\programdata\trusteer\rapport\store\exts\rapportms\ba seline\rapportiaso.sys
               Alert Type: Unclassified software
               Detection Type:
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    From checking the times I saw the message appear just before the last two error messsages.
    I have also recently run some malware software which has quarentined about 20 files and since then the speed has been getting slower and slower to the point that the last restart took 20 mins

  • "Photoshop.exe - Bad Image" error [CS3]

    Hi everyone,
    I use Photoshop CS3, and every time I go to open a new document or open a saved document/picture/etc. I get a "Photoshop.exe - Bad Image" error that reads:
    The application or DLL C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\HPZRPP04.DLL is not a valid Windows image. Please check this against your installation diskette.
    I have to "OK" this message 4 times until I am able to use the program. Any help would be greatly appreciated.
    Thank you,
    Peter

    HPZRPP04.DLL
    Have you tried updating or reinstalling your HP printer? If it's a network printer, try setting up a local printer as the default printer and see if that error goes away.

  • SRM MDM Installation error  :MDM Console Install.exe-Bad Image

    Hi,
    I have installed SRM 5.5 and need to install SRM MDM, but when i am trying to execute MDMConsole Install from GUI _CLIENTS folder getting below error.
    :MDM Console Install.exe-Bad Image
    The application or DLL C :\windows\~GLC0000.TMP is not a valid windows Image, Please check this against your installation deskette
    I tried to execute other installables also getting same error
    Please advice is something is missing
    Thanks,
    Jai

    Thanks to all,
    Downloaded the installable from maket place and it works now.
    I think I tried 64 bit setup earlier
    Regards,
    Jai

  • "Acrobat.exe- Bad Image" error message, Can't open anything with Acrobat

    I have Acrobat Pro 9.0
    OS Windows 7
    Just started having this error problem show up within the past couple weeks.
    Every time I try to open a document the browser freezes up for a few minutes (and I've tried on two different browsers), wont load the page, then I get this message:
    Acrobat.exe - Bad Image
    C:\Program Files (x86)\Adobe\Acrobat 9.0\ Acrobat\BIB.dll is either not designed to run on Windows or it contains an error.
    I have had this program for several months and never had an issue.
    Haven't changed anything I can think of...
    Any suggestions would be greatly appreciated!!
    I also tried just opening the program directly and got the same message.

    My Acrobat 9 Pro freezes constantly. Seeing a pdf inside mutiple browser is not possible. Most of the time Acrobat 9 Pro and Acrobat Reader X starts within 5 min! As soon as I do anything, the top bar that shows "File", "Edit" etc. dissapears and averything freezes! Security software with possible firewalls I've uninstalled. Un- and re-installing Acrobat doesn't change anything. I'm using MS Windows XP, running Adobe CS4. Making any pdf's is no problem. I just can't see them. I can open a pdf inside Illustrator but that goes page by page. Any help?

  • Updating Acrobat 9.0 causes error "Acrobat.exe - Bad Image"

    Full error is:
    Acrobat.exe - Bad Image
    C:\Program Files (x86)\adobe\acrobat 9.0\acrobat\BIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
    Running repair doesn't fix it, only un-installing it and re-installing from scratch. This happens on multiple machines with the same result. As soon as the update is ran it no longer opens and has the error.
    I've tried manually updating it version to version starting at the first 9.1 release but I run into the same error after installing the first update. Uninstalling Acrobat after manually running the first update produced another error durring uninstallation. Error 1905.Module C:|Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\authplay.dll failed to unregister. HRESULT -2147220472. Contact your support personnel.
    System is Windows 7 Enterprise 64bit running on a VDI in a box from Citrix. Version of Acrobat is Pro.
    Any thoughts or ideas on this would be great, thanks.
    Joel

    Are you running updates from the Help menu in Acrobat or by downloading the updates. When you have problems, it is probably best to try running the updates as downloads from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. You will need to generally install the updates in order. You would reboot after the last update.

  • TS1717 ITUNES.EXE - Bad Image.  C:\Window\System32\Softpub.dll Problem

    I have been having a problem getting into ITUNES.  my computer is giving me a Message when i launch Itunes and says
    ITUNES.EXE - Bad Image
    C:\Windows\System32\Softpub.dll is either not designed to run on windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. 
    I have tried downloading the Softpub.dll file and tried replacing it, but my computer says I am not the trusted manager (I am the Admin on this PC and dont know why I cant change it.  if anyone can help that would be great.  Thanks....

    b noir - You are awesome!  I was having the "bad image" problem with the after downloading ITunes 10.  I also had a problem with a DEP error (as you know - data execution protection).  I tried so many things in combination to fix these problems, I am not sure which piece of your advice finally did the trick!  Regarding the bad image, I renamed the file as you recommended.  I tried downloading a new softpub.dll.  I didn't think I was successful, but there it was right where it was supposed to be.  I used the Windows Error Checking feature (right click on C Drive, properties, tools) to clean things up.  Lastly, a friend recommended using a different USB port to sync for the first time.  UREKA!  I can now sync.  Thanks for all of your suggestions, b noir!

  • My itunes won't start after the latest update, it says, "itunes.exe bad image

    After I installed the lastest itunes and went to start itunes, I got an error: itunes.exe bad image.  and inside the error box said, " C:\Windows\system32\dssenh.dll is either not designed to run on windows or it contains an error. Try installiing  the progam again using the original installation media or contact yoour system administrator or the software vendor for support."
    What to do? I have tried uninstalling it and reinstalling it numerous times. HELP!!

    many thanks.
    Let's try an sfc /scannow. On a Windows 7 system, see the instructions from the following document:
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

Maybe you are looking for