Bridge flash web gallery does not take crop data

Hello,
I have been using bridge and Photoshop for many years and made many flash galleries. Lately, using CS5 I have noticed that in some cases, the crop and image adjustments information entered in bridge/photoRaw is not taken into account when make the Flash gallery. Whay is interesting is that the keywods are read correctly, also, in Lightroom, the crop information is read correctly for the same directory.
Has anyone seen that ? Any setting that I'm missing?
Thanks
Vincent

I am not sure to know where I can do this ...
is it this ?: I selected all images
unfortunatly result is the same ...

Similar Messages

Lightroom 4.1 flash web gallery does not work in 32 bit Internet Explorer 9.0

I have a web site with a Web Gallery I created in Lightroom 4.1. . The Web Gallery will not work in the IE 9.0 32 bit browser. It does work in the IE 9.0 64 bit browser. Also, all other flash material seems to work fine in my 32 bit browser such as Youtube and other flash sites material. I have a flash menu created from another product on my web site which also works fine in the 32 bit IE browser but I cannot get the Lightroom Flash Gallery to work in this browser.
Any suggestions?

I am not sure to know where I can do this ...
is it this ?: I selected all images
unfortunatly result is the same ...

Web gallery does not work

Hi,
Problem that I have ... is difficult to explain so picture :
As you see when I click under the web gallery and I selected a flash galery or imported web galley (exemple here is airtight simpleviewver...) ... the screen in the middle box keeping black ... nothing more ...
here more you can see there is a problem : it's when I click under flash galery ... see middle box ... there is no photo adding ...
Only htmml galery appears in the middle screen :
Previously it worked I saw when I clicked under airtight postcardviewver web gallery ... all my photo getting on the middle screen ...
Now it only works with html lightroom gallery .... I don't know why
More when I click under preview in brower some galery works but some not ... when I said not ... the result is a black screen in IE or firefox ...
I tried to uninstall and re install lightroom but result is the same .
Lightroom version: 3.5 [775451]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 8
Processor speed: 2,1 GHz
Built-in memory: 8106,1 MB
Real memory available to Lightroom: 8106,1 MB
Real memory used by Lightroom: 269,1 MB (3,3%)
Virtual memory used by Lightroom: 390,6 MB
Memory cache size: 0,0 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1600x900
Someone can help me please ?

I am not sure to know where I can do this ...
is it this ?: I selected all images
unfortunatly result is the same ...

Auto fill subject with an Email link in CS4 Bridge flash web gallery

Is there a way to autofill the subject line of the email link in the CS4 Bridge flab web galleries? I can do it if I use the html gallery, but I prefer the look of the flash galleries.
If I open the "group.xml" file I see code for me email link, exp.: <contactEmail>maillto:[email protected]</contactEmail>
I tried adding the "?subject=My Subject" like I would on an html file but that didn't work. I was hoping for some suggestions.
Thanks!

I want it to work on the click of a mouse: when I run or test the page the email comes up immediately. Here is what I have so far:
navigateToURL(new URLRequest("mailto:mailto:[email protected]?subject=yoursubject&body=your message"));
/* Mouse Click Event
Clicking on the specified symbol instance executes a function in which you can add your own custom code.
Instructions:
1. Add your custom code on a new line after the line that says "// Start your custom code" below.
The code will execute when the symbol instance is clicked.
button_3.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_6);
function fl_MouseClickHandler_6(event:MouseEvent):void
     // Start your custom code
     // This example code displays the words "Mouse clicked" in the Output panel.
     trace("Mouse clicked");
     // End your custom code
So how do I get the email to open ONLY when the mouse clicks on the link??
Sue
Susan Blair Cheatham
Su-Jobi Web Design
mailto:[email protected]
Cell: 706 949-6035
Thank you for choosing Su-Jobi Web Design
We appreciate your trust!

Sharepoint web analytics does not show any data

Hello,
We installed Sharepoint Web Analytics some days ago (separated application pool).
Installation completed successfully.
Search works fine and returns expected results.
But reports still don't show any data :
Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
What I tried :
connect to website using different users (admin user included)
checked that needed services on server are started (especially analytics services)
restart services Web Analytics Data Processing Service and
Web Analytics Web Service
checked that all services applications are started (WSS_UsageApplication status was
stopped so I started it using Sharepoint 2010 Management Shell)
checked service application associations (especially if Analytics Service Application Proxy is checked)
manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
manual start of incremental crawling
restart IIS
checked scope of data logging (especially if Enable usage data collection and
Enable health data collection are checked)
checked that the .usage file are generated correctly on the disk
checked in the Logging database (WSS_UsageApplication) that the
RequestUsage view contains data collected from the .usage files
checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
checked on the website side that Advanced Web Analytics feature is
Active
recreate web analytics application
checked for any message in ULS logs that could help... I only noticed that error :
The SharePoint Health Analyzer detected an error. Drives are running out of free space. Available drive space is less than twice the value of physical memory. Can it cause the problem ?
All appears to work fine but I can't see any data in the reports.
The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
Anything else I can try ?
Thanks.

Yes I have granted application pool identity full control on the Web Analytics Service Application.
I also checked that Sharepoint 2010 timer service is started.
I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
regularly and seems to be an exception :
Enumerating all sites in SPWebApplication Name=SharePoint - 80.
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Maybe it can be the cause ?
I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space. Available drive space is less than twice the value of physical memory." does not appear anymore.

Clicking on the Back button in web browser does not take you back properly

When using Info View and drilling down through reports (using the InfoView Portal in the "View my documents" settings of User Preferences), if you have drilled down through several reports and then want to go back to the page you were viewing before you drilled down one more layer using the browsers BACK button takes you back a random number of pages - NOT back one page.
Is there a fix or workaround for this?
Thanks

>
Tim Simon wrote:
> Which type of report is this? A Crystal Report (not sure what your question means)
>
There are some big differences if using say a webi report.
I just tested on XIR2 SP4 and back forward worked fine with CR drilldown, using the sample reports.
Could be a report design issue or something wrong with your deployment, maybe even a browser setting (not sure as I don't work reporting issues too often).
You can wait to see if someone else has run into this or open a message with support to have an engineer take a look.
Regards,
Tim

Web Gallery does not appear in File Automate

CS3. I used it a couple of times. Now it is not there. I reinstalled CS3 and it is still not there. I want to customize one of the templates, but cannot even create a show now. I searched all over Adobe's forums for hours and nothing. Can someone help
Also, Adobe's user interface for this and other forums is unfriendly, confusing and a step back into the Window's world. Amazing.
Thanks for any help,
John

Here's the fix.
[Mac OSX 10.4.11, 1.67 GHz PPC G4, 2 GB DDR SDRAM, 74.41 GB]
Copy the PhotoShop installer folder from the CD to your local drive desktop.
Repair permissions.
Restart in safe boot mode (cmd+shift on chime, hold it till you get the grey Apple and spinning fan thingie below).
Double click the Photoshop setup icon and choose to remove all components.
Copy all installers for whatever version of CS3 you have from the disks to your local drive desktop. (You can copy the goodies later). Takes 7 min. in my case.
Disable all fonts in your font management software.
Restart in safe mode and repair permissions.
Launch the Photoshop installer. Install it. With the other installers on the desktop, the in
Restart normally, repair permissions. Test it. Enable fonts. Test it. Done.
I will reserve my comments on the forum since this is not the proper place.
Feel free to email me if you want to discuss. Peace.

Last image in flash gallery does not always load

Several times I have had the last image in a flash web gallery not appear. Today, image #41 is seen in the filmstrip, the gallery indicates I should see #41 of 41 images, but that image does not appear in the thumbnail strip to the left and the large image is still #40. I tried switching out the last file, but that doesn't make a difference. I have built much larger galleries with the same default flash template and had everything work. Is this a bug, or am I missing something?
Thanks,

I had the same thing happen to me. Image #25/25 refused to load. Once I added another image for a total of 26 all images loaded.
Weird.

Flash web gallery NEED HELP

I have no clue how to program these flash galleries....My
site www.al-burke.com contains a flash web gallery that I purchased
online and I have been able to upload it to the site but its says
movie not loaded. I have all the neccessary files in place I
believe (gallery.xlm, main.html, main.swf) all under a folder. Can
anyone please help me out? Thanks

Does it work when you test it from your local drive? If it
does, but doesn't work when you post the files to the server, you
may not have uploaded all of the parts correctly. If it doesn't
work when testing from the files on your harddrive either, then
there is a linking issue - have you moved any of the files after
the gallery was created...? (If so, the links will be broken).
You also reference a file named "main.html" - this isn't the
name of the file that's posted - if you created a file named that,
then changed the name to index.html without updating the links when
prompted, that will also break the links...
Hope that helps...

Variable weblinks in Flash web gallery title & caption fields

I know that one can put a fixed URL as custom text into a LR flash web gallery title or caption fields and simply click on that field in a gallery and go to that website. However, that URL is fixed and shows up for all images in the gallery. I would like the ability to have that URL vary by image. That is, I want to be able to setup custom text for a title or caption gallery field that inserts an image's certain metadata value(s) within a URL string. E.g., be able to enter for these LR Flash web gallery fields custom text of the form:
#A href="{title}">click here for foobar#click here for foobar#/A#
where "#" = enclosing html brackets
and where {title} is an image's LR title metadata (e.g., "http://www.foobar.com")
Left clicking on such a custom field should take the browser to webpage whose URL is held in the current image's title metadata.
This almost works now (LR v1.4) ... Such a custom text title displays correctly (i.e., just an underlined "click here for foobar"). And if I right click on it and choose "copy link", the correct URL from that image's metadata is in fact there. Unfortunately a left click just doesn't take the browser there.
This capability would be useful for providing image info which either won't fit (e.g., extended caption info) or is technically not easy to place (e.g., a dynamic *.mov pano view) on an image's web gallery page.

Just a comment about the web link in general -- Make sure your URL link actually works in the live /internet world. I have found that it doesn't. It looks great on your computer but when you actually build the web gallery, the link doesn't go anywhere.

LR Flash web gallery

I'm having a real problem with creating a flash web gallery in LR. I'm using LR 1.3 and firefox when I upload the gallery and go to view it in firefox it just hangs there saying "loading..." and it never loads. When I create a html gallery it works fine. I really want to use LR flash galleries on my site but I'm afraid I'll have to look for other options if this doesnt work out :(

**Update**
Working now. We were doing javascript:; browser pop to this page and if the Height of the window exceeded the ie6 laptop screen size the flash gallery would fail to work. When I changed the height to 690 (from 800) it worked fine. Go figure...
Is this a known flash issue that I was out of loop on? Do we need to keep window sizes in mind?
I have LR 1.3 and IE6 is not showing thumbnails on my flash gallery output.
Also note that I had to remove the xml doc type (line 1) from the index file or I would get a parse error on our server (it worked fine locally and on my leopard MAMP websrv testing environment.)
Seems to be working on all other browser/platforms but IE6 is by far the most popular for our website.
Flash Gallery

Insert flash web gallery into webpage

Hi!
How do I integrate a flash web gallery created with photoshop into my own webpage? I have to call the swf from another folder than where all the web gallery stuff is.
For example my webpage is in the folder /index
my gallery swf and all the xml and js and imagefiles are in /index/mygallery
I tried to copy all the css and js stuff from the generated index.htm into my header and copied all the div-content into my page. Than I altered the call of the gallery.swf to mygallery/gallery.swf and in the js in the header I altered mygallery/flashobject.js
But it still does not work!?

Open the xml file and see if there are any folder location that. Other than that it should be working. I haven't tried the flash gallery yet. So I could be off here. Is there another external javascript file that has not been uploaded?

Customizing Flash Web Gallery in Photoshop

Hoping someone can help me... I'm at my wits end.
I am doing a Flash Web Gallery in Photoshop, the second kind where the images "morph" into horizontal/vertical shapes.
I need to make a couple of customizations to it: First, I would like the TITLE of the image (or description) to appear the whole time on the gallery, NOT just when you hover over it with your mouse.
I need to make the text larger for the titles.
I would like to make the little Controller images on the lower right corner BIGGER, they are so small one can barely see them.
I was able to download the flash source file but my Flash expertise is limited and it looks like all they are are movie clips, you can't acutally MANIPULATE items in there.
PLEASE HELP!!!!!!!
Thanks!

My advice is to get a 3rd party gallery creation program.
Many are free and most are better than Adobe's half-baked offerings.

Flash Web Gallery large photo border erratic behavior

In Lightroom HTML Web Gallery one can define border styles for the displayed photos. I cannot find a similar future in the Flash Gallery however. Is there one??? In any case, the first 6 photos in my Flash Web Gallery appear with a black border around the main large displayed photos. The subsequent photos do not have any border. In either case, it would be nice to have the border appearance consistent and preferably user definable.
Any help is appreciated.

Hi John,
Thanks for that. A bit more digging - preview in browser is fine and export to harddrive then runs in browser OK. I tried HTML gallery and got the same error (No 2 says a file was truncated) so I chucked it all at another server and it seems to be OK. Looks like an ISP problem.
Those unconnected problems were:
Despite repairs I still can't burn to CD, it still says it's been disabled. I don't miss the feature but I like to think my installation is fully functional.
I still seem to have a memory leak in that if I crop,edit and export 46 images as jpg it falls over, very politely - sorry for the inconvenience etc but this is repeatable, yesterday it crashed at 46 and 92 images. I wonder if my 2.3 install was OK and this was behind the second part of my question.
David

Web gallery control not visible

HI
<br />
<br />Viewing through the downloadable resources for the Flash Web Gallery templates I saw that there is the possibility of having Play/Stop/Forward/Backward/...-Controls in the lower right corner of the Flash Gallery. How can I make them visible, when I create a webgallery, they are not there when I create one. I thought it should be in the galleryconfig.xml the option
<br />
<var symboltype="boolean" name="showController" value="true" /></var>
<br />, but this does not work for me.

One more Question: In the downloadable templates there is Web Gallery 3: In the Samplefile the thumbnails are all rotated a litte, how is that done?

Bridge flash web gallery does not take crop data

Similar Messages

Maybe you are looking for