Bridge for CS6 opens and then will not respond on PC
Bridge for CS6 opens and stops responding on P
C
I do not think I can do a reset , because FireFox immediately after start will not respond so I cannot get to the reset option. Tell me how to reset manually
Similar Messages
-
I downloaded an audio book from iTunes, it works for 3 chapters and then will not play
I'm not sure why it seems like a bad file. Can I Re download it without having to buy the book again or is there a way to just refresh it? I turned off my phone and still no luck
How to report an issue with Your iTunes Store purchase
-
Safari Crashes and then will not open yahoo.mail or gmail
Safari Crashes and then will not open yahoo.mail or gmaill
Is anyone else having these, or similar problems. i cannot log-in to my yahoo.com or onto gmail. The issue started yesterday.
The message states that it cannot secure the
connection.
Any suggestions?
I downloaded Netscape to be able to log-in into my accounts.
What a pain. I am using 10.3.9, and all was fine
thanks,
victoriaThis just happened to me. Apparently yahoo mail just implemented something.. Check out this message from yahoo mail.
=================
Sorry, Yahoo! Mail Beta does not support your browser.
You can either download a compatible browser or proceed to the original Yahoo! Mail.
If you want to use the Yahoo! Mail Beta...
You can download any of the supported browsers for free by clicking the links below:
Internet Explorer 6.0 or higher (for Windows)
Firefox 1.5 or higher (for Mac and Windows)
SeaMonkey 1.0.8 or higher (for Mac and Windows)
To proceed to original Yahoo! Mail...
Simply follow the link below. If you sign in later with a supported browser, you will automatically be taken to Yahoo! Mail Beta.
Proceed directly to the original Yahoo! Mail
I use 10.3.9 and I have no idea why yahoo mail stopped working today. I have firefox installed on my machine. BTW - firefox is able to serf the web without issues on all of my sites. I often wonder why apple wanted to build a browser, why not just use firefox and contribute to it's development for the mac environment? -
i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind. i paid for some aps and they will not open with my cu
You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+
-
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD -
I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?
Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.
-
I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating meyou have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more. -
I have installed LR 6 for windows (win7) and LR will not start but hangs up
I have installed LR 6 for windows (win7) and LR will not start but hangs up. I have uninstalled the software and re-installed it, Tried to open it as Administrator and it still hangs up with the Adobe banner (the picture) being displayed. Nothing happens. When I click on anything I get the message that Lightroom is not responding. I have asked to have a new catalog created for Lightroom 6............Please help.
Thank you. Leohbereth,,
It is Ideal to install Creative Cloud app , if you are using Adobe apps.
Creative Cloud is nothing but an updated version of Adobe Application manager. Adobe Application Manager is required for different purposes like Activation, Update.process and installation processes.etc
Adobe application manager must be up to date , that brings to Creative Cloud application which is the updated version .
No need to Sign in and all , just keep it install, if you are not okay with installing Creative Cloud app. it's okay , you can still have Adobe Application Manager only. -
Trying to setup airport for 1st time and it will not connect to internet?
You might try doing a reset of your AirPort unit. Use a pen or paper clip to press in on the recessed reset button while you plug it in, then continue to keep the button pressed until the status light flashes several times,
For more advice, please describe all your networking gear. -
I can not upgrade the iOS on my phone, nor sync the phone because the process starts with backing up the phone which always hangs up at the backing up stage and then will not allow further progress.
And for this I guess that it is the backing up of my Podcasts - which are free downloads that causes the hang up. These are items that I have played and synced before without issues. I am thinking this way because these are Podcasts that I used to play but sundenly would not play on my iPhone. Each time I try to play anyone of them it generates the message - this movie could not be played.
I am scared of atempting a system restore because I guess I may lose my SMS for the past two months. Please approach the solution from this point of view.
Thanks
JoePlease refer to this thread.
https://discussions.apple.com/thread/3417041
It may have something to do with one of your backup files that has been corrupted before. -
My daughter forgot her passcode for her 3GS, and iTunes will not let me change the passcode or even update. Please help!!!
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
My 27" iMac displays vertical green lines when turned on and then will not boot up
Can anyone tell me why my 27" iMac displays vertical green lines when it is turned on and then will not boot up?
Welcome to Apple Support Communities
The display or graphic card are damaged. The only thing you can do is to take your computer to an Apple Store or reseller to get your computer repaired.
If you use an external display with your Mac, connect it to your computer and see if these lines appear on the external display. If so, it's a graphic card problem -
Has this happened to anyone else?
Jaybunni wrote:
I have had my macbook pro for 3 days, and it will not charge.
You have 14 days from the date of purchase to return your MBP. Personally, I would not waste my time "troubleshooting" if the normal solutions do not work.
Return the MBP for one that works before your 14 days are up and/or call AppleCare ASAP!!!
Good luck! -
Im trying to install new drivers for my printer and it will not accept my password
Im trying to install new drivers for my printer and it will not accept my password
Hey fyermanbob,
Thanks for using Apple Support Communities.
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Have a nice day,
Mario -
Chose a photo to print, then the screen went grey (spinning white icon), and iPhoto will not respond
I chose a picture to print, but instead of a print dialogue box, the screen went grey and iPhoto will not respond. I have even shut down my iMac completely, but when I relaunch iPhoto, I get the same screen (grey with the spinning "thinking" icon). I am running the latest version of Yosemite on the iMac. Thanks for your help.
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair the database and if necessary rebuild your database
LN
Maybe you are looking for
-
yes itunes will not open it gives me an error that the file itunes library.itl is locked or on a locked disk or i don't have write permission for it.
-
I have Windows 8.1, 64 bit, Flash Player 15, and use Firefox browser, Flash Player keeps crashing on every web page including Adobe, I cannot play games, this is a screen shot of the problem I have done all the FAQ's disabled hardware acceleration, c
-
Addition of a new field in PR's Item level
hi folks, I have to add a new field in the item level of the PR i.e. ME51N. Can any body suggest me how i should go about it.
-
Can I edit a .CSV file with StarBase? I've been able to open the file, but can't edit. I created a data entry form, but it opens in read only mode. I'm not all that familiar with databases, so please excuse my ignorance. Dave
-
My account seem to be at United States, but I'm from Mexico, and I wanna change it so I can buy the Illustrator and Photoshop...