Bridge for mac - Very slow connect after installing sd card

Hey guys,
after I installed a 32gb SD card,  the connection-procedure is really slow. The green bar fills in not 10sec but in 2 minutes now. What happened? Really the SD card? What can I do?
Thanks!

Hey guys,
I had to move the XperiaTransfer-Folder to my SD-card. Now, after I moved it, the date of 70% of the photos is the current date and nearly 900 images are dated for today. It's quite hard to navigate through the images now. How does the Sony Gallery app gather information? What can I do to fix it?
Thanks

Similar Messages

  • Very slow connection after phone line repair

    I had my phone line repaired yesterday with new cabling and new BT box for phone and computer.My phone is fine, but the hub for my broadband does not appear to be ok.  the phone symbol on the hub did not light up at all  this morning, and after restarting the hub and going back to default settings it is now glowing orange only.  It was ok yesterday after being fixed. Very slow connection now. Should i keep  everything on  to see if it will right itself, or re-start yet again?
    I have been looking on BT's options for fixing but can't seem to find anything. the connections in my area are fine so it can't be an outside fault

    Which home hub do you have? Did you recently re-contract or change your package, as that will affect your hub phone.
    As for the speed issue, it should get better if you leave it alone.
    See Why has my speed dropped
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Sony Bridge for Mac PAINFULLY SLOW

    I'm trying to sync my music to my new Z1 compact.
    I'm getting write speeds of 0-100kb/s.
    At this rate it might take me a whole week to sync my music.
    Is this singular to me or are others having this problem?

    Hi FrancescoZZ,
    I'm sorry to hear that you're disappointed with Bridge. We have had reports of this before, and are working on constantly improving the software.
    In order for me to help you, please answer the following questions:
    1. Are you using the latest version of Bridge?
    2. What's your OSX version, and how much RAM does your computer have?
    3. Could you provide me with error logs, which could help determine what's causing the problem?
    Here’s how to get error logs from Sony Bridge for Mac:
    1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
    2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
    3. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Export logs"
    4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
    5. PM that file to me or post the contents here 
    Best Regards,
    David

  • Very slow boot after installing 10.10.3

    insanely slow boot after installing 10.10.3, it takes 10times longer compare to 10.10.2, using MBA 2014

    Open System Preferences, select Startup Disk, and make sure your internal drive is selected as the startup disk. Then click restart!
    This worked for me, personally with the same issue.
    Good luck!

  • Apple track pad very slow connecting after sleep

    I have a late 2009 iMac (11,1) running10.10.1.  It is very slow (5 to 35 seconds) connecting to my Apple trackpad whether I am logged in when I put the iMac to sleep or whether no one is logged in.  I have run EtreCheck and am including the output.  I would appreciate anyone offering advice on what to do to get my trackpad to connect quickly.
    Thanks,
    Hugh McCutchen, Jr.
    Problem description:
    OS X 10.10.1 takes 5 to 35 seconds to find my Apple trackpad after putting the iMac to sleep.
    EtreCheck version: 2.1.1 (104)
    Report generated December 6, 2014 at 2:56:37 PM PST
    Hardware Information: ℹ️
      iMac (27-inch, Late 2009) (Verified)
      iMac - model: iMac11,1
      1 2.8 GHz Intel Core i7 CPU: 4-core
      12 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 0/DIMM1
      4 GB DDR3 1067 MHz ok
      BANK 1/DIMM1
      4 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 4850 - VRAM: 512 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 18:49:12
    Disk Information: ℹ️
      APPLE HDD HUA722010CLA330 disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Oz (disk0s2) / : 999.35 GB (827.58 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GA11N
    USB Information: ℹ️
      American Power Conversion Back-UPS ES 750 FW:841.I2 .D USB FW:I2
      Fujitsu Takamisawa Component Apple Optical USB Mouse
      USB Keyboard + 3P  HUB
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.firmtek.driver.FT_ATA_Sil3112 (5.3.0) [Support]
      [not loaded] com.firmtek.driver.Sil3112DeviceNub (5.3.0) [Support]
      [not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
      [not loaded] com.ni.Fantom.nxtfwdl (1.1.1) [Support]
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2) [Support]
      /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
      [not loaded] com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
      [not loaded] com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
      [not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
    Launch Agents: ℹ️
      [running] com.bjango.istatmenusagent.plist [Support]
      [running] com.brother.LOGINserver.plist [Support]
      [loaded] com.citrix.AuthManager_Mac.plist [Support]
      [running] com.citrix.ReceiverHelper.plist [Support]
      [running] com.citrix.ServiceRecords.plist [Support]
      [running] com.ecamm.iglasses3agent.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
    Launch Daemons: ℹ️
      [running] com.adobe.ARM.[...].plist [Support]
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.barebones.authd.plist [Support]
      [loaded] com.barebones.textwrangler.plist [Support]
      [running] com.bjango.istatmenusdaemon.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
      [invalid?] com.shirtpocket.backupbytime.plist [Support]
    User Login Items: ℹ️
      SMARTReporter ApplicationHidden (/Applications/SMARTReporter/SMARTReporter.app)
      InstUtilLaunch Application (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
    Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.1 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
      OVSHelper: Version: 1.1 [Support]
      RealPlayer Plugin: Version: Unknown [Support]
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      DivXBrowserPlugin: Version: 2.2 [Support]
      LogMeIn: Version: 1.0.298 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
      CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      GarminGpsControl: Version: 2.9.2.0 Release [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      Yahoo! Installer 3: Version: 1.0.128 [Support]
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
      WebEx: Version: 1.0 [Support]
    Safari Extensions: ℹ️
      Translate
      DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
      DivX  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Folding@home  [Support]
      Growl  [Support]
      Java  [Support]
      Kensington MouseWorks  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Oz: Disk size: 999.35 GB Disk used: 171.76 GB
      Destinations:
      Data [Network]
      Total size: 2.00 TB
      Total number of backups: 57
      Oldest backup: 2014-05-05 03:43:59 +0000
      Last backup: 2014-12-06 22:48:42 +0000
      Size of backup disk: Adequate
      Backup size 2.00 TB > (Disk used 171.76 GB X 3)
    Top Processes by CPU: ℹ️
          4% WindowServer
          2% SystemUIServer
          1% iStatMenusDaemon
          0% fontd
          0% powerd
    Top Processes by Memory: ℹ️
      271 MB mds_stores
      206 MB com.apple.WebKit.WebContent
      193 MB Safari
      168 MB softwareupdated
      168 MB SystemUIServer
    Virtual Memory Information: ℹ️
      5.35 GB Free RAM
      4.87 GB Active RAM
      1.56 GB Inactive RAM
      1.10 GB Wired RAM
      46.17 GB Page-ins
      66 KB Page-outs
    Diagnostics Information: ℹ️
      Dec 6, 2014, 09:41:20 AM NETserver_2014-12-06-094120_OZ-2.crash
      Dec 4, 2014, 08:07:59 PM Self test - passed

    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.
    ====================
    but i will then be without it for weeks which i cannot afford to miss at the minute,
    If it does come down that, CALL AppleCare and request a replacement until yours is repaired.

  • Mavericks - Word for Mac, saving docs problem after installing Mavericks

    I have Word for Mac. Since installing Mavericks, when I download a document, I am unable to 'save as'  to anywhere but downloads folder. When I select the folder I want save the doc to, 'save' greys out. Help!

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • Very slow iMac after installing internet security software

    I purchased Kaspersky Internet Security for Mac and since installing it my iMac has been painfully slow, from turning on, to opening Apps or just viewing documents.
    Has anyone experienced the same issue?

    Antivirus software is NOT needed if the Mac you are running is only running OS X. Antivirus apps interfere with normal performance and operation of a Mac because they program too many controls into the main OS X system software impacting general performance of your Mac.
    Here are some of my tidbits of advice on how to avoid viruses in the future, if you encounter a virus, again.
    Some anti-virus solutions can slow down your Mac, but to be honest, the best anit-virus app is you, the user and your brain.
    Don't visit questionable websites or website you are unsure about.
    Don't use Torrents or engage in "Torrenting"
    Don't install pirated software or software downloaded from a questionable or unknown websites or untrutsted sources.
    Java is still a vulnerability concern,  if you do not need it, don't use it.
    Use a browser filter and pop-up blocker
    Don't open email attachments from email addresses that you do not recognize.
    Install security updates when they become available
    Educate yourself as to what threats are common and active.
    In effect, use your own brain as the antivirus filter.
    Follow that advise and in MOST cases, you will be fine and won't risk your Mac to potential Trojans, malware or viruses.
    If you feel you need some baseline virus protection that is minimally invasive on the Mac OS X system, install
    ClamXAV
    http://www.clamxav.com/

  • Outlook 2011 for mac will not open after installing intego virus barrier

    Outlook 2011 for mac will initialize after intego virus barrier X6 anyone know this fix for this?

    Yes. Uninstall Intego Virus Barrier. You don't need it.
    You will find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435

  • Very slow internet after installing 10.5.3

    Hello all, this is the very first time I have encountered any problems with my Macbook and I am hoping I can get some help here.
    About a month ago I came home from college and hooked my Macbook up to the wireless router at home, everything was running fine. We have fiber optic internet so usually my speeds are blazing fast. Recently however I installed the 10.5.3 update and now my internet speeds are very dismal. I am having trouble getting my Macbook to connect to the router at all, much less load any web pages.
    I have taken an ethernet cable and plugged my Macbook directly in to the router to see if things load any faster, and unfortunately things are still just as slow over a wired connection. After typing in a URL you will sit there at a blank web page for about 45 seconds to a minute before it even starts loading the page, and when the page does load it takes forever to pull up and images take even longer to display. If it helps at all our router is a dlink DI-524 wireless router.
    I was browsing through these forums yesterday to see if I could find a solution to my issue. so far I have tried the following:
    -set router to broadcast in G mode only (instead of mixed mode)
    -removed encryption from router
    -tried various encryption settings (64 bit WEP, 128 bit WEP, WPA, etc)
    -updated the firmware of my router
    -created test account on my macbook, opened internet browser on it, everything still runs slow
    -deleted cache for safari/mozilla as well as the .plist files, still slow internet
    when i called apple the agent suggested putting in my os X CD and do an archive and install, i did and once i was set back to os X 10.5 i was unable to connect to wifi at all, and wired connection over ethernet seemed just as slow as before. when i check for apple updates the 10.5.3 update was my only option, i couldnt choose 10.5.2 so installing that would put me back where i was before.
    in the end i set my computer up last night to do a restore from my time machine backup. my machine has been restored to the backup i created just before i tried the archive and install, so im back to running OS X 10.5.3 now.
    I'm sorry this post got so long, I just wanted to make sure that I included details of what I've done so far. Again I would like to stress that I am having this problem on my macbook even with my computer hooked directly to the router with my ethernet cable. (using that same cable and hooking up any one of my windows computers in the house results in fast and effortless web browsing so i know the cable is good)

    It's not a matter of Mac OS X being "picky" but rather various ISPs not keeping up with changes in the DNS standard.
    In the most recent case, 10.5.3 had to revert to a previous method of performing some DNS lookups because various ISPs hadn't bothered to update their servers to handle what has been the recommended way of handling lookups for the past eight years.
    OpenDNS also has done a lot of work to make sure their DNS servers work as fast as possible; ISPs have absolutely no incentive whatsoever to provide fast DNS services.

  • Raid mode very slow/ crashing after installing driver (Z68A-GD65 (G3))

    I recently purchased a Z68A-GD65 (G3) motherboard, i5-2500K, 8 gb ram, and a Crucial 64GB 4m SSD drive. The intention was to use the SSD drive for Intel Smart Response Tech.
    Instructions tell me to place the SATA ports in RAID mode, which I did. During installation of Windows 7 (64-bit), I provided the "F6" raid drivers which installed. After that point, my hard drive (a WD 250GB SATAII drive) begins to perform incredibly slow. Once Windows 7 installs, which takes way longer than it should, Windows has problems booting and won't work properly.
    I tried installing Windows 7 without the "F6" raid drive on install and that worked fine. Everything seemed to be working great. I then installed the Intel Rapid Storage Tech software and rebooted. Now my system is acting up again. It takes far longer to boot, it shuts down as soon as it boots, and it has even blue screened on boot. It is very unstable.
    My SSD is unplugged during all of this. I'm just trying to get Windows 7 to run properly on my one mechanical drive in raid mode.
    Do I have a bad motherboard? Anyone have any ideas?
    Edit: I'm not using the Marvell ports. The hard drive works fine in IDE/ACHI modes... I've been using it for years.
    Thanks

    So it turned out that the issue was the hard drive itself. It had been running flawlessly for years as my system drive. However, the Intel iastor driver exposed a hidden issue with the drive.
    I decided to check the Windows system event log for any clues. In there I saw errors with event id 9 on iastor. They were lined up with the times of the hangs and blue screens. Solutions I found online for this issue did not help. Luckily I have two hard drives in my system, although they are both the same model. I moved my data around and clean installed Windows on the other drive instead. The hangs and blue screens are no longer occurring.

  • Very slow Safari after IOS8 Iphone 5S

    Hello all
    I live in Iraq, so basically internet here is very slow, however after installing IOS 8, Safari now is very very slow
    I tried other browsers and they were a better
    any one of you guys have similar issue ?

    My iPad and iMac are really screaming after the update. My iPhone 4 is running more slowly. What's odd is that even with it right next to the AEBS it's running slow. The iPhone 4 is listed as 802.11 b/g/n in Airport Utility in the Advanced/Wireless Clients window. When it was running slow, the signal level was OK (actually good-about the same level as the iMac) but the noise was high so the signal to noise ratio was only between 12 and 20 dB. Also the rate was at 5 and staying there 9 (not sure what the rate number is but it was much smaller than all the others clients).
    I turned WiFi OFF on the phone then back on again. When it came back, the signal to noise ratio was better (went to about 30-40 dB, and the rate went up to 58. Then after a few minutes, the signal to noise ratio went back to about 20 and the rate number dropped to 5 again.
    I'm not sure what this all telling me exactly, but I agree the iPhone seems a bit slower. It's running quite a bit below my 60 day average for download and uplaod speeds - especially a ways away from the AEBS (new 5th gen). The other devices (iMac and iPad are performing as good and even a little better than their 60 day averages.

  • Mavericks install incomplete. No Apple installers on HD. Will I be able to upgrade to Yosemite and will it fix all that didn't install with Mavericks upgrade? Very slow connection speeds 30 hrs to download Mavericks. Tried re-install; no help/

    Ever since upgrade to Mavericks I have been having problems which are too numerous to mention. I finally found a program from a UCBerkley professor called Pacifier which indicated 4000+ of 400,000+ files and folders did not install. I was unable to go further to try to fix everything because Pacifier can't find ANY Apple installers on my HD. It recommended I download the Mavericks installer without reinstalling to continue; however, after having done so (very slow connection; takes 30 hours to download) and although the installer appears in apps while downloading it disappears and NO Apple installer packages can be found on my hard drive. I tried to download Yosemite once and it indicated my system wasn't eligible for the upgrade. Its' download time was similar to Mavericks; 28+ hours.
    I am using a Macbook Pro mid-2012 version OS X 10.9.5 (13F34); Processor 2.5 GHz Intel Core i5; Memory  4 GB 1600 MHz DDR3; Graphics  Intel HD Graphics 4000 1024 MB.
    Regardless of how many files and apps I remove my memory is being eaten up to the point I can hardly do anything at all. There are no civil words for how frustrated I am. Someone please help me.
    Thanks,
    JJ

    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • Bridge for Mac loses connection with Xperia E4g

    I am using a brand new Xperia E4g dual with Mac and PCs. At the beginning, the application was performing correctly, now, BfM starts, recognizes the phone and after a while ist says "Connection problems" and I cannot access the unit anymore (looks lik e a  timeout issue). Tried two different Mac plattforms with different OS version, same result, tried PC Companion platform, works fine, any help? Might there be a cache file which should be deleted?
    BfM Version 4.0 (4003)

    Hi Kazawaza!
    Hi I have been in contact with the development crew now.
    Sorry for a late reply.
    They don't know what the problem is.
    So can you please send me your log-file so I can forward the log-file to the development crew.
    Here’s how to get error logs from Sony Bridge for Mac:
    1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
    2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
    3. In BfM, hold the "alt" key down while selecting the ”Xperia” menu. Select "Export logs"
    4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
    5. PM a dropbox link with the file to me
    Best regard
    Fredrik

  • Very slow connection even after upgrading firmware router WRT54G2 v1.5

    Hi,
    My connection is very very slow, even after upgrading firmware of a router WRT54G2 v1.5. I use a Mac, and Mac OS X 10.5.8.
    I have also re-set the router and configured but it didn't work. Any other alternative to speed up my connection? Thanks!!

    On the setup page,reduce the MTU to 1400,Under the Wireless tab..Wireless Network mode should be mixed...Provide a unique name in the Wireless Network Name (SSID) box.Set the Wireless channel to 11-2.462GHz...Click on Advanced Wireless Settings...Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304.
    Now,reboot the router and check...

  • I have installed mountain lion on my macbook pro ,but it made my mac very slow. Would someone please tell me how  to uninstall this one and reinstall snow leopard?

    Hello,
    I have installed mountain lion on my macbook pro ,but it made my mac very slow. Would someone please tell me how  to uninstall this one and reinstall snow leopard? I tried to do it by my original CDs but macbook  pro didn't let me to do it.
    Thanks

    It would be easier to just fix whatever is making your machine slow.
    I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
    Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.

Maybe you are looking for