Bridge hangs when pngs are in network share

Ok I have a weird issue Bridge hangs when I have a png in a folder on a network share if remove the png file from the folder the other items produce thumbnails work fine on a pc with the pngs just on macs bridge crashes and if you try to open the file it crashes photoshop.
smb share

It doesn't matter if its OS 10.4, 10.5 or 10.6
Intel or G5 Macs
Photoshop/Bridge CS3 or CS4
Adobe photoshop and Bridge crash opening/viewing and saving BMP,PNG or GIF on a large (over 1TB) windows SMB file server.
we didn't have this problem before the server was enlarged to over 1TB
also the same files work fine when 1st copied off the server onto the Mac desktop.
Also the finder and "preview" program in Mac OS 10,5 and 10,6 have no problems with the files on the server, its just photoshop and bridge :-(

Similar Messages

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Why does Bridge hang when selecting thumbs

I've been working on a script that looks through all the currently visible images in Bridge and selects a subset of them. In my case, I'm selecting only the latest version of an image (e.g. the PSD, not the NEF). My code logic is working to identify the thumbs that I want to select, but when I try to actually select them in Bridge, I find that Bridge hangs.
The whole script is a bit complicated, but the relevant part to my problem is:
for (i = 0; i < fileNames.length; i++)
if (!fileNames[i].hasDerivative)
var thumbObj = currentThumbs[fileNames[i].thumbIndex];
app.document.select(thumbObj);
If I comment out the app.document.select line, the script works perfectly. I've even written debugging code that verifies that my script finds all the right thumbs. But, when I try to actually select them in Bridge, Bridge hangs and I have to kill it from task manager.
Is there something I'm either doing wrong or need to know about app.document.select(thumb) in Bridge? Why would that call hang? Could I somehow be passing an invalid thumb to this function? Is there a way I can write debugging code to test if it's a valid thumb I'm passing in all cases?
--John

Hmmm. That's not very convenient and it doesn't prevent my mistake. At the cost of a lot more typing, it can prevent other scripts from accidentally referencing or colliding with your variable names, but it doesn't prevent you from accidentally colliding with other people's variables if you leave off the object qualifier when you are typing.
When I saw a reference to namespaces in something I was reading, It thought it was more like real namespaces (e.g. C++ namespaces) where you define a scope where all declared or referenced variables are automatically in that namespace unless they are explicitly referenced/declared otherwise. Does JavaScript not have that capability?
It would be more like this:
namespace MyProgram {
var i = 3;
// lots of other code here
With a real namespace, "i" wouldn't be a global variable. It's real name/declaration would be MyProgram.i or MyProgram::i depending upon the syntax.
Does JavaScript not have real namespaces?
I get that I can explicitly declare everything to a scope of MyProgram to simulate some benefits of namespaces, but that's a lot of extra typing and, presumably a bunch of extra work for the interpreter since there's at least one extra dictionary lookup for every variable or function reference.
--John

Applications Hang on Save to SMB Network Share

We recently upgraded a file server from an old PowerMac G4 (running 10.4.11) to an Intel Quad Core X-Serve with OS 10.5.8. This X-Serve also happens to run as our calendar server which most people have no problems with.
The file server was used by a half dozen designers with Adobe CS3 and rarely had any problems saving to the G4 10.4.11 Mac. Unfortunately it seems that the difference in file sharing between 10.4.11 and 10.5.8 is one that causes programs such as Photoshop or Word to hang when saving a file.
Usually after opening a file they can save the file once or maybe twice, but any further attempts end up in the computer hanging with the beach ball in the program and sluggish performance in Finder. You have to hard power off the machines and reboot to get them to work again and it results in the file being zeroed out.
While I know the "official" Adobe response is that it doesn't support saving files over the network , but considering it worked before, and still works with a couple of Linux file servers we also have, the problem is for us (and for many others I have found) in an update somewhere between OS 10.5 and the current version.
Apart from the obvious "save local, copy after" strategy, are there any fixes or a work-around to this issue?

Essentially because this server also needs to be accessible by Windows machines as well. Otherwise we'd probably keep using AFP. I've read about an update in 10.6 which may fix the issue but I'd like to be sure before we spend $500 on what might not fix the issue.

Net Use give error 67 when trying to mount network share in Windows PE

I am trying to deploy Windows 7 Pro by PXE booting Windows PE5 and applying a WIM file over a network share. The problem that I am running into is that I get an system error 67. I can ping the server with the network share with both the IP
and the FQDN, but whether I use the machine name OR the IP I get a system error 67. I verified that the account that I am using to connect has permissions, but even excluding the user name and waiting for it to prompt me for a user name gives the same
error. Any idea what is going on?

Check : http://social.technet.microsoft.com/Forums/en-US/9c429bef-edf0-4bad-83a3-644e6ba28ea8/net-use-system-error-67?forum=winservergen
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Office files slow when opening from a Network Share

Hi!
So, we have a client who moved from having regular Office installations to Office 365 for Mid Size business and reinstalled the Office that comes along with Office 365. Ever since we did
that, there is a delay in opening any office files from a network share. Opening up a Word or Excel document takes up a lot longer than it did before. We have another client with the exact same issue who have Office 2013, so I think its mostly something to
do with office 2013. This problem has been going on for a month, and I have tried everything I can. I have gone through most posts on technet and the internets. Tried disabling AV, Office File Validation, added the network share to trusted locations, removed
add-ins. Nothing works! All other files opens up quickly, pdf, jpg. We can open larger jpg or pdf files faster than smaller office documents. This is a significant problem with our clients as they work in recruitment and open up resumes all day from the network
share and it takes forever to open.
Any advice or help is appreciated!
Thanks!
Shaneez

Hello,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Reg: HTTP and RTMP when these are in Network Delays

Video streaming in HTTP and RTMP, which one performs better when delays are introduced. Streaming from one PC to other PC through LAN. Here i introdced delays in both HTTP and RTMP streaming. So, far i have seen RTMP is quite good in low delay variations such as -+10ms. Here Qn is which is better when high delays are introduced.
Thanks in Advance,
sree7k7

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do you have any ad-blocking extensions or (security) software?

Large files are corrupting when copying to a network share

Hi,
I have a Mac running 10.5 and whenever I copy a file 50MB or over to a network location the file will corrupt. I've tested with a number of files (zip, movie etc) and all seem to be corrupt when I try to run them from the network.
I've swapped the ethernet cable, tried the second network port and I have been moved to a new port on the switch in the server room.
Does anyone have any ideas?
Thank you in advance

Hmmm, open Network Utility in Applications>Utilities>Info tab, select the Interface you're using, copy a big file & see if there are any errors or collisions on the right, or if it always happen after a certain number of packets.
Also, what Link speed & packet size is it using? What Format is the Network Drive?

[solved]Dolphin crashes when trying to access network shares

When attempting to access shared folders using dophin (on my other Windows box -> smb://10.0.1.6) it crashes abruptly... I recently upgraded to KDE 4.6.2. Before that it was working fine (4.6.1). I haven't installed gdb or nothing yet so I can't paste crash dumps.
It only crashes after successful login/when attempting to list shares. Works in konqueror without problems.
Name : kdebase-dolphin
Version : 4.6.2-1
Anyone else getting this?
Edit:
This bug has silently gone away after updating to latest kernel (2.6.38). I use pcman now anyways.
Last edited by xs (2011-04-19 10:37:43)

arojas wrote:Output of 'pacman -Q | grep phonon' ?
[ben@ben ~]$ pacman -Q | grep phonon
phonon 1:4.6.0-8
phonon-gstreamer 4.7.0-1
[ben@ben ~]$

Treemenu navigation hangs when there are many subitems

Hi,
I am using Treemenu (http://www.treemenu.com) for left navigation. After I have added some sub-items, after some level, I am not able to add anymore sub-items. The page just hangs and doesn't show anything. I was under the impression that one can add any number of sub-itmes in a treemenu. Please help me with this.
Ramesh

Your best bet is to post your problem on the message board at the site, most people wouldn't like to go through such a complex third party program to correct it:
http://www.treemenu.com/board/
Also you might want to take a look at known bugs at:
http://sourceforge.net/projects/jsmenu
and
http://www.treemenu.com/support/bugs.shtml

IOMeter hangs when running to a NFS share from Windows Storage Server 2012

Hello,
I am trying to measure performance of NFS share coming from Windows Storage Server 2012 using IOMeter also running on windows Server 2012. I can create the share on WSS2012. Windows 2012 client does see the share. IOmeter does see the share, and I can start
running. But fairly quick IOMeter gets an error, and stops. After that NFS share on the client is not visible to IOMeter anymore. This happen every time.
I have used IOMeter to SMB shares a lot with no problem..
Thanks in advance,
BJ

I am trying to measure performance of NFS share coming from Windows Storage Server 2012 using IOMeter also running on windows Server 2012. I can create the share on WSS2012. Windows 2012 client does see the share. IOmeter does see the share, and I can start
running. But fairly quick IOMeter gets an error, and stops. After that NFS share on the client is not visible to IOMeter anymore. This happen every time.
I have used IOMeter to SMB shares a lot with no problem..
1) Can you use NFS share with NFS clients normally? I mean is it I/O Meter who has issues with streaming or do other apps have similar problems? Say normal copy to / from NFS share?
2) What error exactly is popped up? Do you happen to have a screenshot?
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Web serve hanging, when we are trying to create a Letter

Hi, I have a very powerfull web server, but if more than 5 users at the same time trying to create letter (in letter module) the M.S.word coulden't run and my letters remain pending, after that nobody can create letter.
my M.S.Word version is 2003 and the web server is Jboss, any advice?

Hi Srini......
There is no need to have query based approval as you can apply standard approval procedure to any marketing document for adding.
Just follow the normal step how we give authorization to add any document and select the user as originator and also select the document for which it wants to be approved.....
But if you have certain condition because of which your document should ask for approval then you should have query based approval.....
Regards,
Rahul

Network shares can't be ejected? ("Ghost" share problems)

This topic is to try to solve a problem I'm having, as well as many of my Mac friends, when they use a network share, and it then cannot be unmounted.
Basically, there are servers no longer accessible, because we switched LANs, etc.
Symptoms: in the Finder, clicking on the "Eject" button next to the computer's name gives out a dialog telling "A disk on <share name> is in use. Try close applications. (approximately).
Of course, closing all applications doesn't have any effect, neither does relaunching the Finder.
In the Terminal, the command "mount" displays, among others:
//GUEST:@ines:139/Shared Docs em Vaio1 on /Volumes/Shared Docs em Vaio1 (smbfs, nodev, nosuid, mounted by xxx)
//GUEST@ines:139/Download on /Volumes/Download (smbfs, nodev, nosuid, mounted by xxx)
I tried umount "Shared Docs em Vaio1", as well as the other share, and yet it outputs "not currently mounted"
I then did lsof to check what files were open on these share, and the output starts with lsof: WARNING: can't stat() smbfs file system /Volumes/Shared Docs em Vaio1
Output information may be incomplete.
assuming "dev=2d000004" from mount table
lsof: WARNING: can't stat() smbfs file system /Volumes/Download
Output information may be incomplete.
assuming "dev=2d000005" from mount table
I've reached the end of my meager knowledge on this issue, which is minor (in the sense that performance is not affected), but relatively present nevertheless.
Of course it goes off when rebooting, but I want to be able to solve this problem without a reboot, so how can it be?

I don't know if it is the same with SMB shares, but with AFP ones I sometimes get this message when the share point is on my MacBook & it goes to sleep. The 'solution' -- such as it is -- is just to wait for the client Mac to notice the server isn't responding & pop up a server disconnect notice on the screen. Once you click the 'ok' button in that notice, the share point disappears from the Finder & no more messages about something on it being in use appear.
This notice can take several minutes to appear. I don't know of any way to speed up the process, or if it would be wise to try. I assume the long timeout is so that brief network outages are not problematic.

Accessing network share

hello, I have created sharepoint control , whose purpose is to load from specidied folder its own subdirecotry structure and present it in treeview. When I set as default folder local direcotry on webserver, it works..during debuging in visual studio 2013,
when I set some network share, I get error ACCESS DENIED...I am using sharepoint 2010 foundation on windows server 2012 R2 with IIS7. Application pool for Sharepoint application pool port 80 is NETWORK SERVICE... I have addedd ful control permissions for NETWORK
SERVICE and also COMPUTERNAME$...but still receiving error ACCESS DENIED...Please, if you can, help me.
any advice will be really apriciated.....Zdeno
sharepoint control disabling

It should work using Windows impersonation, the "Ego" approach I describe here;
http://www.loisandclark.eu/Pages/Impersonation.aspx
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Windows network shares disappearing when users are logged on to Mac

We are having some problems with windows network shares disappearing when users are logged on to Mac computers.
We have a number of Mac labs that users can logon to using their AD login credentials. Their network shares are saved on a windows file server. The ad plug has been configured on each client Mac as has the LDAP plug-in. It is configured to connect to the Xserve which is running as an OD master. The system preferences for the client Macs are being managed from the Xserve.
The problem for the users is that they can log into the Mac no problem and they can see their network share appearing on the desktop and in the dock, but for some reason on random Macs and with random users the network share disappears. If they log off and log back in again the network share is still missing. As it happens randomly I can not put my finger on what the problem is.
Most labs either have Intel iMacs running 10.4.11 or Intel iMacs running 10.5.5
Any help will be appreciated
Noel Patterson
Southern Regional College
Northern Ireland

Mike,
We need to know some basic scoping information to provide any further input.
1)
Is the user prompted that the server will be shutting down?
2)
Does Task Scheduler show that the task ran at the scheduled time?
3)
Are there any errors in %windir%\tasks\schedlgu.txt?
4)
Does the problem still occur if the machine is in its own OU with blocked inheritance?
Does the problem still occur in a clean boot configuration with MSConfig
Steps to clean boot machine:
================
Start > Run > Msconfig > Select Services > click "check box", "Hide all microsoft services" > Disable all
Start > Run > Msconfig > Select startup> Disable all
Reboot
Thanks,
ankit

Bridge hangs when pngs are in network share

Similar Messages

Maybe you are looking for